Spectral Signatures of Hydrogen Thioperoxide (HOSH) and Hydrogen Persulfide (HSSH): Possible Molecular Sulfur Sinks in the Dense ISM

For decades, sulfur has remained underdetected in molecular form within the dense interstellar medium (ISM), and somewhere a molecular sulfur sink exists where it may be hiding. With the discovery of hydrogen peroxide (HOOH) in the ISM in 2011, a natural starting point may be found in sulfur-bearing analogs that are chemically similar to HOOH: hydrogen thioperoxide (HOSH) and hydrogen persulfide (HSSH). The present theoretical study couples the accuracy in the anharmonic fundamental vibrational frequencies from the explicitly correlated coupled cluster theory with the accurate rotational constants provided by canonical high-level coupled cluster theory to produce rovibrational spectra for use in the potential observation of HOSH and HSSH. The ν6 mode for HSSH at 886.1 cm−1 is within 0.2 cm−1 of the gas-phase experiment, and the B0 rotational constant for HSSH of 6979.5 MHz is within 9.0 MHz of the experimental benchmarks, implying that the unknown spectral features (such as the first overtones and combination bands) provided herein are similarly accurate. Notably, a previous experimentally-attributed 2ν1 mode, at 7041.8 cm−1, has been reassigned to the ν1+ν5 combination band based on the present work’s ν1+ν5 value at 7034.3 cm−1. The most intense vibrational transitions for each molecule are the torsions, with HOSH having a more intense transition of 72 km/mol compared to HSSH’s intensity of 14 km/mol. Furthermore, HOSH has a larger net dipole moment of 1.60 D compared to HSSH’s 1.15 D. While HOSH may be the more likely candidate of the two for possible astronomical observation via vibrational spectroscopy due to the notable difference in their intensities, both HSSH and HOSH have large enough net dipole moments to be detectable by rotational spectroscopy to discover the role these molecules may have as possible molecular sulfur sinks in the dense ISM.     

Naphthazarin Derivatives in the Light of Intra- and Intermolecular Forces

Our long-term investigations have been devoted the characterization of intramolecular hydrogen bonds in cyclic compounds. Our previous work covers naphthazarin, the parent compound of two systems discussed in the current work: 2,3-dimethylnaphthazarin (1) and 2,3-dimethoxy-6-methylnaphthazarin (2). Intramolecular hydrogen bonds and substituent effects in these compounds were analyzed on the basis of Density Functional Theory (DFT), Møller–Plesset second-order perturbation theory (MP2), Coupled Clusters with Singles and Doubles (CCSD) and Car-Parrinello Molecular Dynamics (CPMD). The simulations were carried out in the gas and crystalline phases. The nuclear quantum effects were incorporated a posteriori using the snapshots taken from ab initio trajectories. Further, they were used to solve a vibrational Schrödinger equation. The proton reaction path was studied using B3LYP, ωB97XD and PBE functionals with a 6-311++G(2d,2p) basis set. Two energy minima (deep and shallow) were found, indicating that the proton transfer phenomena could occur in the electronic ground state. Next, the electronic structure and topology were examined in the molecular and proton transferred (PT) forms. The Atoms In Molecules (AIM) theory was employed for this purpose. It was found that the hydrogen bond is stronger in the proton transferred (PT) forms. In order to estimate the dimers’ stabilization and forces responsible for it, the Symmetry-Adapted Perturbation Theory (SAPT) was applied. The energy decomposition revealed that dispersion is the primary factor stabilizing the dimeric forms and crystal structure of both compounds. The CPMD results showed that the proton transfer phenomena occurred in both studied compounds, as well as in both phases. In the case of compound 2, the proton transfer events are more frequent in the solid state, indicating an influence of the environmental effects on the bridged proton dynamics. Finally, the vibrational signatures were computed for both compounds using the CPMD trajectories. The Fourier transformation of the autocorrelation function of atomic velocity was applied to obtain the power spectra. The IR spectra show very broad absorption regions between 700 cm−1–1700 cm−1 and 2300 cm−1–3400 cm−1 in the gas phase and 600 cm−1–1800 cm−1 and 2200 cm−1–3400 cm−1 in the solid state for compound 1. The absorption regions for compound 2 were found as follows: 700 cm−1–1700 cm−1 and 2300 cm−1–3300 cm−1 for the gas phase and one broad absorption region in the solid state between 700 cm−1 and 3100 cm−1. The obtained spectroscopic features confirmed a strong mobility of the bridged protons. The inclusion of nuclear quantum effects showed a stronger delocalization of the bridged protons.     

Optical Dynamic Nuclear Polarization of 13C Spins in Diamond at a Low Field with Multi-Tone Microwave Irradiation

Majority of dynamic nuclear polarization (DNP) experiments have been requiring helium cryogenics and strong magnetic fields for a high degree of nuclear polarization. In this work, we instead demonstrate an optical hyperpolarization of naturally abundant 13C nuclei in a diamond crystal at a low magnetic field and the room temperature. It exploits continuous laser irradiation for polarizing electronic spins of nitrogen vacancy centers and microwave irradiation for transferring the electronic polarization to 13C nuclear spins. We have studied the dependence of 13C polarization on laser and microwave powers. For the first time, a triplet structure corresponding to the 14N hyperfine splitting has been observed in the 13C polarization spectrum. By simultaneously exciting three microwave frequencies at the peaks of the triplet, we have achieved 13C bulk polarization of 0.113 %, leading to an enhancement of 90,000 over the thermal polarization at 17.6 mT. We believe that the multi-tone irradiation can be extended to further enhance the 13C polarization at a low magnetic field.     

Millimeter-Wave Spectroscopy of Methylfuran Isomers: Local vs. Global Treatments of the Internal Rotation

Methylfurans are methylated aromatic heterocyclic volatile organic compounds and primary or secondary pollutants in the atmosphere due to their capability to form secondary organic aerosols in presence of atmospheric oxidants. There is therefore a significant interest to monitor these molecules in the gas phase. High resolution spectroscopic studies of methylated furan compounds are generally limited to pure rotational spectroscopy in the vibrational ground state. This lack of results might be explained by the difficulties arisen from the internal rotation of the methyl group inducing non-trivial patterns in the rotational spectra. In this study, we discuss the benefits to assign the mm-wave rotational-torsional spectra of methylfuran with the global approach of the BELGI-Cs code compared to local approaches such as XIAM and ERHAM. The global approach reproduces the observed rotational lines of 2-methylfuran and 3-methylfuran in the mm-wave region at the experimental accuracy for the ground vt=0 and the first torsional vt=1 states with a unique set of molecular parameters. In addition, the V3 and V6 parameters describing the internal rotation potential barrier may be determined with a high degree of accuracy with the global approach. Finally, a discussion with other heterocyclic compounds enables the study of the influence of the electronic environment on the hindered rotation of the methyl group.     

Buoyancy density measurements for 1-alkyl-3-methylimidazolium based ionic liquids with tetrafluoroborate anion

Density measurements are reported performed on three 1-alkyl-3-methylimidazolium-based ([C_n-mim], n=2,4,6$n=2\text{,}4\text{,}6$) ionic liquids with tetrafluoroborate anion at atmospheric pressure at 15 temperatures from 281 to 353 K. The buoyancy method was employed, using the microbalance of the Krüss K100MK2 tensiometer. At each temperature from 33 to 55 individual buoyancy readings were taken in most cases. The density average values at particular temperatures are presented with estimated total standard uncertainty less than ±0.4$\pm 0.4$ kg m⁻³ (3.3 ×10⁻⁴?$\times 10^{-4}?$). An empirical density–temperature equations have been developed describing the temperature dependence of each ionic liquid density. The 58 new experimental data points on the density–temperature relation of the three ionic liquids of interest are means calculated from about 3000 individual density readings, which have been altogether taken in the present study.     

Fluorescent Liquid Tetrazines

Tetrazines with branched alkoxy substituents are liquids at ambient temperature that despite the high chromophore density retain the bright orange fluorescence that is characteristic of this exceptional fluorophore. Here, we study the photophysical properties of a series of alkoxy-tetrazines in solution and as neat liquids. We also correlate the size of the alkoxy substituents with the viscosity of the liquids. We show using time-resolved spectroscopy that intersystem crossing is an important decay pathway competing with fluorescence, and that its rate is higher for 3,6-dialkoxy derivatives than for 3-chloro-6-alkoxytetrazines, explaining the higher fluorescence quantum yields for the latter. Quantum chemical calculations suggest that the difference in rate is due to the activation energy required to distort the tetrazine core such that the nπ*S1 and the higher-lying ππ*T2 states cross, at which point the spin-orbit coupling exceeding 10 cm−1 allows for efficient intersystem crossing to occur. Femtosecond time-resolved anisotropy studies in solution allow us to measure a positive relationship between the alkoxy chain lengths and their rotational correlation times, and studies in the neat liquids show a fast decay of the anisotropy consistent with fast exciton migration in the neat liquid films.     

Solubility of carbon dioxide in the solvent system (2-amino-2-methyl-1-propanol + sulfolane + water)

New sets of data for the solubility of CO₂ in the amine solvent system of 2-amino-2-methyl-1-propanol (1) + sulfolane (2) + water (3) were presented in this work. The measurements were done at temperatures of 313.2, 333.2, 353.2, and 373.2 K and CO₂ partial pressures up to 193 kPa. The investigated compositions were as follows: (i) w₁=16.5%$w_1=16.5\%$, w₂=32.2%$w_2=32.2\%$; (ii) w₁=8.2%$w_1=8.2\%$, w₂=41.2%$w_2=41.2\%$; (iii) w₁=22.3%$w_1=22.3\%$, w₂=27.7%$w_2=27.7\%$; and (iv) w₁=30.6%$w_1=30.6\%$, w₂=19.4%$w_2=19.4\%$, where w$w$ is the mass percent of the component. The present solubility data was correlated by a modified Kent–Eisenberg model. The model reasonably represents the present solubility data, not only over the considered conditions, but also for a wider range of temperatures, partial pressures, and compositions.     

Galvano-Fenton Engineering Solution with Spontaneous Catalyst’s Generation from Waste: Experimental Efficiency,Parametric Analysis and Modeling Interpretation Applied to a Clean Technology for Dyes Degradation in Water

In this paper, the degradation of the diazo dye naphthol blue black (NBB) using the Galvano-Fenton process is studied experimentally and numerically. The simulations are carried out based on the anodic, cathodic, and 34 elementary reactions evolving in the electrolyte, in addition to the oxidative attack of NBB by HO• at a constant rate of 3.35×107 mol−1·m3·s−1 during the initiation stage of the chain reactions. The selection of the operating conditions including the pH of the electrolyte, the stirring speed, and the electrodes disposition is performed by assessing the kinetics of NBB degradation; these parameters are set to 3, 350 rpm and a parallel disposition with a 3 cm inter-electrode distance, respectively. The kinetics of Fe(III) in the electrolyte were monitored using the principles of Fricke dosimetry and simulated numerically. The model showed more than a 96% correlation with the experimental results in both the blank test and the presence of the dye. The effects of H2O2 and NBB concentrations on the degradation of the dye were examined jointly with the evolution of the simulated H2O2, Fe2+, and HO• concentrations in the electrolyte. The model demonstrated a good correlation with the experimental results in terms of the initial degradation rates, with correlation coefficients exceeding 98%.     

Removal of Carbamazepine in Aqueous Solution by CoS2/Fe2+/PMS Process

Carbamazepine (CBZ), as a typical pharmaceutical and personal care product (PPCP), cannot be efficiently removed by the conventional drinking water and wastewater treatment process. In this work, the CoS₂/Fe²⁺/PMS process was applied for efficient elimination of CBZ. The CBZ removal efficiency of CoS₂/Fe²⁺/PMS was 2.5 times and 23 times higher than that of CoS₂/PMS and Fe²⁺/PMS, respectively. The intensity of DMPO-HO• and DMPO-SO4•− followed the order of Fe²⁺/PMS < CoS₂/PMS < CoS₂/Fe²⁺/PMS, also suggesting the CoS₂/Fe²⁺/PMS process has the highest oxidation activity. The effects of reaction conditions (e.g., CoS₂ dosage, Fe²⁺ concentration, PMS concentration, initial CBZ concentration, pH, temperature) and water quality parameters (e.g., SO42−, NO3−, H2PO4−, Cl−, NH4+, humic acid) on the degradation of CBZ were also studied. Response surface methodology analysis was carried out to obtain the best conditions for the removal of CBZ, which are: Fe²⁺ = 70 µmol/L, PMS = 240 µmol/L, CoS₂ = 0.59 g/L. The sustainability test demonstrated that the repeated use of CoS₂ for 8 successive cycles resulted in little function decrease (<10%). These findings suggest that CoS₂/Fe²⁺/PMS may be a promising method for advanced treatment of tailwater from sewage treatment plant.     

The Spectroscopic Characterization of Halogenated Pollutants through the Interplay between Theory and Experiment: Application to R1122

In the last decade, halogenated ethenes have seen an increasing interest for different applications; in particular, in refrigeration, air-conditioning and heat pumping. At the same time, their adverse effects as atmospheric pollutants require environmental monitoring, especially by remote sensing spectroscopic techniques. For this purpose, an accurate characterization of the spectroscopic fingerprint—in particular, those of relevance for rotational–vibrational spectroscopy—of the target molecules is strongly needed. This work provides an integrated computational–theoretical investigation on R1122 (2-Chloro-1,1-difluoro-ethylene, ClHC=CF2), a compound widely employed as a key intermediate in different chemical processes. State-of-the-art quantum chemical calculations relying on CCSD(T)-based composite schemes and hybrid CCSD(T)/DFT approaches are used to obtain an accurate prediction of the structural, rotational and vibrational spectroscopic properties. In addition, the equilibrium geometry is obtained by exploiting the semi-experimental method. The theoretical predictions are used to guide the analysis of the experimentally recorded gas-phase infrared spectrum, which is assigned in the 400–6500 cm−1 region. Furthermore, absorption cross sections are accurately determined over the same spectral range. Finally, by using the obtained spectroscopic data, a first estimate of the global warming potential of R1122 vibrational spectra is obtained.     

Cn,CnH and their anions: Quest for linearity with n≤8 even versus odd,and beyond

Using the concept of quasi-molecule (“tile”) and the database of quasi-molecules embedded on a parent molecule, it is discussed whether the latter can attain linear form or otherwise. Besides anew accurate optimization of all tiles (quasi-triatomics) at various levels of ab initio theory and basis-sets, the nature of the predicted stationary points for the title parent molecules is probed through a priori calculations here too reported. Also discussed is the common rule that even- $n$ ${\text{C}}_n{\text{H}}^{-}$ anions are linear while odd-numbered ones tend to have nonlinear isomers. The reported quasi-molecule approach is general, and allow the prediction of linearity or otherwise of the parent systems prior to calculations on them. When based on an extension of the bisection method (Varandas, Int. J. Quantum Chem. 2023 , 123, e27036.), it is easy to use even for large parent molecules, as illustrated for neutral and anionic carbon clusters with $n\ge 9$.     

Dehydration performance of a hydrophobic DD3R zeolite membrane

The all silica DDR membrane turns out to be well suited to separate water from organic solvents under pervaporation conditions, despite its hydrophobic character. All-silica zeolites are chemically and hydrothermally more stable than aluminum containing ones and are therefore preferred for membrane applications, including for dehydration, even though these type of membranes are hydrophobic. Permeation of water, ethanol and methanol through an all-silica DDR membrane has been measured at temperatures ranging from 344 to 398 K. The hydrophobic membrane shows high water fluxes (up to 20 kg m⁻² h⁻¹). The pure water permeance is insensitive to temperature and is well described assuming weak adsorption. Excellent performance in dewatering ethanol (N=2$N=2$ kg m⁻² h⁻¹and _αw=1500${\alpha }_{\text{w}}=1500$ at 373 K and _xw=0.18$x_{\text{w}}=0.18$) is observed and the membrane is also able to selectively remove water from methanol (N=5$N=5$ kg m⁻² h⁻¹ and _αw=9${\alpha }_{\text{w}}=9$). Water could also be removed from methanol/ethanol/water (_αwater_/EtOH=1500${\alpha }_{\text{water}/\text{EtOH}}=1500$, _αMeOH_/EtOH=70${\alpha }_{\text{MeOH}/\text{EtOH}}=70$ at 373 K) mixtures, even at water feed concentrations below 1.5 mol%.     

Physical versus non-physical effective nuclear masses for non-adiabatic corrections to molecular spectra

Two types of developments for very accurate non-adiabatic corrections to rovibrational molecular energy levels, one of a formal nature and the other of a heuristic nature, lead to fundamentally different approaches for effective nuclear masses. The former yields effective masses that have non-physical interpretation at some ranges of nuclear distances. The later uses physical masses obtained from electronic structure calculations. This paper contains a brief review of the subject and proposes procedures to improve and generalize the heuristic approach. Comparisons are made of the results obtained by the two approaches for the H ${}_2$ molecule, since no further calculations were found with the proper accuracy, but some issues involving the HeH ${}^{+}$ ion and the water molecule are discussed. The conclusion is that the heuristic approach has many advantages over the formal one, namely, equivalent accuracy and physically grounded qualitative interpretation. But, moreover, it seems to be presently the only method that allows non-adiabatic calculations for well isolated states of larger molecules.     

1H NMR Study of the HCa2Nb3O10 Photocatalyst with Different Hydration Levels

The photocatalytic activity of layered perovskite-like oxides in water splitting reaction is dependent on the hydration level and species located in the interlayer slab: simple or complex cations as well as hydrogen-bonded or non-hydrogen-bonded H₂O. To study proton localization and dynamics in the HCa₂Nb₃O₁₀·yH₂O photocatalyst with different hydration levels (hydrated—α-form, dehydrated—γ-form, and intermediate—β-form), complementary Nuclear Magnetic Resonance (NMR) techniques were applied. ¹H Magic Angle Spinning NMR evidences the presence of different proton containing species in the interlayer slab depending on the hydration level. For α-form, HCa₂Nb₃O₁₀·1.6H₂O, ¹H MAS NMR spectra reveal H₃O⁺. Its molecular motion parameters were determined from ¹H spin-lattice relaxation time in the rotating frame (T_1ρ) using the Kohlrausch-Williams-Watts (KWW) correlation function with stretching exponent β = 0.28: Ea=0.2102 eV, τ0=9.01 × 10−12 s. For the β-form, HCa₂Nb₃O₁₀·0.8H₂O, the only ¹H NMR line is the result of an exchange between lattice and non-hydrogen-bonded water protons. T_1ρ(1/T) indicates the presence of two characteristic points (224 and 176 K), at which proton dynamics change. The γ-form, HCa₂Nb₃O₁₀·0.1H₂O, contains bulk water and interlayer H⁺ in regular sites. ¹H NMR spectra suggest two inequivalent cation positions. The parameters of the proton motion, found within the KWW model, are as follows: Ea=0.2178 eV, τ0=8.29 × 10−10 s.