Synthesis and properties of colloidal ternary ZnGa2O4:Eu nanocrystals

A nonhydrolytic hot solution synthesis technique was used to grow monodisperse ternary oxide nanocrystals of ZnGa₂O₄:Eu³⁺. The shape of ZnGa₂O₄:Eu³⁺ nanocrystals was a function of the type of precursor, and their size was controlled by changing the concentration ratio of Zn precursor to surfactant. The crystal structure of synthesized ZnGa₂O₄ nanocrystals was a cubic spinel with no detectable secondary phases. Photoluminescence of red-emitting ZnGa₂O₄:Eu³⁺ nanocrystals resulted in a high (⁵D₀-⁷F₂)/(⁵D₀-⁷F₁) intensity ratio, suggesting that the Eu³⁺ ions occupy tetrahedral Zn²⁺ sites or distorted octahedral Ga³⁺ sites with no inversion symmetry in ZnGa₂O₄ nanocrystals.     

Passively Q-switched laser operation in a composite Nd:YVO4/Nd:YVO4/Nd:YVO4 crystal with a GaAs saturable absorber

By using a piece of GaAs wafer as the saturable absorber, the performance of the passively Q-switched composite Nd:YVO₄ laser with different output couplers has been demonstrated for the first time as far as we know. The largest continuous wave output power of 1.52 W is obtained at the incident pump power of 5.31 W, giving an optical conversion efficiency of 28.7% and a slope efficiency of 30.2%. The shortest pulse width of 11 ns, the largest single-pulse energy of 2.49 μJ and the highest peak power of 190 W are also obtained.     

Enhancement of luminescence properties of Eu:YVO4 in polymeric nanocomposites upon UV excitation

Highly emissive Eu³⁺:YVO₄ nanocrystals were successfully prepared by the hydrothermal method. The average diameter of grains was determined to be 15 nm. Transparent polymer nanocomposites composed of PMMA and well dispersed Eu³⁺:YVO₄ nanocrystals were fabricated by in situ polymerization. The nanocrystalline powders and nanocomposites were characterized by scanning and transmission electron microscopy (TEM) and X-ray diffraction (XRD). The luminescence properties of the obtained nanocomposites were investigated and compared with the starting powders and Eu³⁺:YVO₄ single crystal. The effect of the polymeric host on the luminescence properties of Eu³⁺:YVO₄ is presented and discussed.     

Diode-pumped doubly Q-switched mode-locked YVO4/Nd:YVO4 laser with AO and GaAs saturable absorber

By using both acousto-optic (AO) modulator and GaAs saturable absorber, a diode-pumped doubly Q-switched and mode-locked (QML) YVO₄/Nd:YVO₄ laser is presented. The average output power and the pulse width of the Q-switched envelope have been measured. The Q-switch pulse energy of the doubly QML laser are higher than that only with GaAs. The stability of the QML laser with the dual-loss-modulation is significantly improved if compared to that only with GaAs.The experimental results show that the doubly QML YVO₄/Nd:YVO₄ laser has nearly 80% modulation depth and deeper than that of the singly passively QML pulse. The doubly Q-switched mode-locked pulse inside the Q-switched envelope has a repetition rate of 111 MHz and its pulse width is estimated to be about 700 ps. By using a hyperbolic secant square function and considering the Gaussian distribution of the intracavity photon density, the coupled equations for diode-pumped dual-loss-modulated QML laser is given and the numerical solutions of the equations are in good agreement with the experimental results.     

Preparation and characterization of upconversion luminescent LaF3:Yb,Er/LaF3 core/shell nanocrystals

LaF₃:Yb³⁺,Er³⁺/LaF₃ core/shell nanocrystals were successfully synthesized using solvothermal method. The crystal structure, morphology and photoluminescence properties of as-prepared nanocrystals were investigated in detail. XRD patterns show that the obtained LaF₃:Yb³⁺,Er³⁺ core and LaF₃:Yb³⁺,Er³⁺/LaF₃ core/shell nanocrystals exhibit hexagonal structure. The average particle size is about 9.3 nm and 11.4 nm for core and core/shell nanocrystals, respectively. Compared with LaF₃:Yb³⁺,Er³⁺ nanocrystals, both the upconversion emission intensity and the lifetime increase in LaF₃:Yb³⁺,Er³⁺/LaF₃ core/shell nanocrystals. The enhancement can be attributed to the LaF₃ shell which can eliminate the nonradiative centers on the surface of LaF₃:Yb³⁺,Er³⁺ nanocrystals.     

A comparative study of continuous laser operation on the F3/2-I9/2 transitions of Nd:GdVO4 and Nd:YVO4 crystals

A comparative study of Nd:GdVO₄ and Nd:YVO₄ crystal lasers pumped by a fiber-coupled diode array has been conducted at the ⁴F_3/2-⁴I_9/2 transitions wavelengths of 912 nm and 914 nm, as well as when intracavity frequency-doubled to 456 nm and 457 nm, respectively. At the fundamental wavelength of 912 nm and second harmonic wavelength of 456 nm, maximum output powers from the Nd:GdVO₄ crystal laser were 7.85 W and 4.6 W at a pump power of 29 W. All the results obtained from Nd:GdVO₄ were superior to those of Nd:YVO₄, indicating that Nd:GdVO₄ is a more efficient laser crystal than Nd:YVO₄ for laser operation on the ⁴F_3/2-⁴I_9/2 transitions.     

Efficient and compact intracavity-frequency-doubled YVO4/Nd:YVO4/KTP laser through analysis of the interaction length

In this paper, a stable end-pumped intracavity-frequency-doubled green laser was demonstrated. The interaction length of different pump systems before setting up the experiment was analyzed in order to find out an effective pump system. The experimental results indicate that the pump system in our configuration is beneficial to the efficient CW Nd lasers. A continue-grown composite crystal YVO₄/Nd:YVO₄, with Nd³⁺ concentration doping of 0.3 at.%, is used as laser medium. With an incident pump power of 27.5 W, as high as 7.2 W of CW output power at 532 nm was achieved. The optical-to-optical conversion efficiency of 26.2% was obtained in CW modes with a flat-flat cavity design.     

The thermal effect in diode-end-pumped continuous-wave 914-nm Nd:YVO4 laser

The thermal effect and the heat generation in diode-end-pumped continuous-wave 914-nm Nd:YVO₄ lasers are investigated in detail. A theoretical model of a diode end-pumped solid-state laser is constructed to analyse the influence of fractional thermal loading on the thermal effect in the Nd:YVO₄ laser based on finite element analysis. The thermal focal lengths and the end-surface deformations of laser rods in Nd:YVO₄ quasi-three-level and four-level lasers are measured and compared with the results obtained by ordinary interferometry for the demonstration of higher thermal loading in 914-nm laser. Finally the fractional thermal loading in the Nd:YVO₄ quasi-three-level laser is calculated by matching the experimental and the simulated end deformations.     

XPS investigation of diffusion of two-layer ZrO2/SiO2 and SiO2/ZrO2 sol–gel films

Two-layer ZrO₂/SiO₂ and SiO₂/ZrO₂ films were deposited on K9 glass substrates by sol–gel dip coating method. X-ray photoelectron spectroscopy (XPS) technique was used to investigate the diffusion of ZrO₂/SiO₂ and SiO₂/ZrO₂ films. To explain the difference of diffusion between ZrO₂/SiO₂ and SiO₂/ZrO₂ films, porous ratio and surface morphology of monolayer SiO₂ and ZrO₂ films were analyzed by using ellipsometry and atomic force microscopy (AFM). We found that for the ZrO₂/SiO₂ films there was a diffusion layer with a certain thickness and the atomic concentrations of Si and Zr changed rapidly; for the SiO₂/ZrO₂ films, the atomic concentrations of Si and Zr changed relatively slowly, and the ZrO₂ layer had diffused through the entire SiO₂ layer. The difference of diffusion between ZrO₂/SiO₂ and SiO₂/ZrO₂ films was influenced by the microstructure of SiO₂ and ZrO₂.     

Thermal effects of the diode end-pumped Nd:YVO4 slab

The thermal effects of the diode end-pumped Nd:YVO₄ slab laser crystal are investigated both analytically and numerically. The theoretical model is established with considering the divergence of the pump beam in the slab. A detailed theoretical analysis of the temperature, stress and the focal length of thermal lens are presented. Using 3D finite element analysis, an accurate numerical solution based on the theoretical model is achieved. Our analysis includes the thermal fracture damage of the thermally and optically anisotropic slab and the predicated values are compared with the experimental results.     

Coupling between Ge-nanocrystals and defects in SiO2

Room temperature photoluminescence (PL) at around 600 nm from magnetron-sputtered SiO₂ films co-doped with Ge is reported. The PL signal is observed in pure SiO₂, however, its intensity increases significantly in the presence of Ge-nanocrystals (Ge-nc). The PL intensity has been optimized by varying the temperature of heat treatment, type of gas during heat treatment, concentration of Ge in the SiO₂ films, and gas pressure during deposition. Maximum intensity occurs when Ge-nc of around 3.5 nm are present in large concentration in SiO₂ layers deposited at fairly high gas pressure. Based on time resolved PL, and PL measurements after α-particle irradiation or H passivation, we attribute the origin of the PL to a defect in SiO₂ (probably an O deficiency) that is excited through an energy transfer from Ge-nc. There is no direct PL from the Ge-nc; however, there is a strong coupling between excitons created in the Ge-nc and the SiO₂ defect.     

Sol-gel growth of Gd2MoO6:Eu nanocrystalline layers on SiO2 spheres (SiO2@Gd2MoO6:Eu) and their luminescent properties

SiO₂@Gd₂MoO₆:Eu³⁺ core-shell phosphors were prepared by the sol-gel process. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectra (EDS), transmission electron microscopy (TEM), photoluminescence (PL) spectra as well as kinetic decays were used to characterize the resulting SiO₂@Gd₂MoO₆:Eu³⁺ core-shell phosphors. The XRD results demonstrate that the Gd₂MoO₆:Eu³⁺ layers on the SiO₂ spheres begin to crystallize after annealing at 600 °C and the crystallinity increases with raising the annealing temperature. The obtained core-shell phosphors have a near perfect spherical shape with narrow size distribution (average size ca. 600 nm), are not agglomerated, and have a smooth surface. The thickness of the Gd₂MoO₆:Eu³⁺ shells on the SiO₂ cores could be easily tailored by varying the number of deposition cycles (50 nm for four deposition cycles). The Eu³⁺ shows a strong PL luminescence (dominated by ⁵D₀-⁷F₂ red emission at 613 nm) under the excitation of 307 nm UV light. The PL intensity of Eu³⁺ increases with increasing the annealing temperature and the number of coating cycles.     

Synthesis and characterization of Mn-doped Zn2SiO4/SiO2 phosphor particles in core-shell structure

Manganese-doped zinc silicate (Zn₂SiO₄:Mn) is a kind of phosphor material that has a photo-luminescent (PL) and cathode-luminescent (CL) properties with intensive green light emission at 520 nm. The particles consisting of SiO₂@Zn₂SiO₄:Mn (SiO₂ core-Zn₂SiO₄:Mn shell) were synthesized via colloidal process and forced precipitation. After drying, the Zn/Mn precipitates were coated on the surface of SiO₂ particles. The Zn/Mn precipitates reacted with SiO₂ and transformed to Zn₂SiO₄:Mn by suitable calcination. The microstructure, crystalline phase, and luminescent characteristics of the products were studied. Besides, a CL device consisting of the core-shell powder was characterized.     

激光二极管抽运Nd:YVO4晶体的三维热效应分析

针对激光二极管抽运的以Nd:YVO4板条晶体为增益介质的激光器件,基于有限容积法数值分析各向异性介质的热传导方程,给出了Nd:YVO4晶体板条结构的热分布数值模型,并分别模拟仿真了808nm半导体激光器双端端面抽运,大面均匀抽运,大面周期分布抽运三种抽运结构,得到了Nd:YVO4板条晶体在这三种抽运结构下的非稳态时不同时刻的温度曲线和稳态时的三维温度分布切面图.     

Study on morphology and photoluminescence of Au/SiO2 nanocomposite films

Au/SiO₂ nanocomposite films were fabricated on Si (111) substrates by radio frequency (RF) magnetron sputtering technique and annealing at different temperature for 20 min (mode A) and at 1000 °C for different annealing time (mode B). The nanocomposite films were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and photoluminescence (PL). SEM results demonstrate that the size of Au crystallites in mode A first increases and then decreases, on increasing annealing temperature, according to the results of XRD spectra. Analysis of PL spectra in mode B shows that the intensity of the emission peak at 440 nm and 523 nm early increases and late decreases, with increasing annealing time at 1000 °C. The origin of the emission peak at around 440 nm was related to the size and quantity of Au particles and one of the emission peak at around 523 nm was related to the nanostructure of films in agreement with SEM imagines. Experimental results indicated that morphology, microstructure and luminescence of Au/SiO₂ nanocomposite films showed close affinity with annealing temperature and annealing time.     

Preparation and characterization of novel Pd/SiO2 and Ca-Pd/SiO2 egg-shell catalysts with porous hollow silica

Novel egg-shell structured monometallic Pd/SiO₂ and bimetallic Ca-Pd/SiO₂ catalysts were prepared by an impregnation method using porous hollow silica (PHS) as the support and PdCl₂ and Ca(NO₃)₂·4H₂O as the precursors. It was found from transmission electron microscope (TEM), scanning electron microscope (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD) that Pd was loaded on PHS with a particle size of 5-12 nm in Pd/SiO₂ samples and the Pd particle size in Ca-Pd/SiO₂ was smaller than that in Pd/SiO₂ since Ca could prevent Pd particles from aggregating. X-ray photoelectron spectroscopy (XPS) analyses exhibited that Pd 3d_5/2 binding energies of Pd/SiO₂ and Ca-Pd/SiO₂ were 0.2 and 0.9 eV lower than that of bulk Pd, respectively, as a result of the shift of the electron cloud from Pd to oxygen in Pd/SiO₂ and to both oxygen and Ca in Ca-Pd/SiO₂. The activity of Ca-Pd/SiO₂ egg-shell catalyst for CO hydrogenation and the selectivity to methanol, with a value of 36.50 mmol_CO mol⁻¹_Pd s⁻¹ and 100%, respectively, were much higher than those of the catalysts prepared with traditional silica gel as the support, owing to the porous core-shell structure of the PHS support.     

New approach for fabrication of folded-structure SiO2 using oyster shell

Inspired by the phenomenological differences of layers in oyster shell and the morphological mimicry of SiO₂ thin film, a folded-structure SiO₂ was created by simple spray deposition system. The folded-structure SiO₂ was analyzed by scanning electron microscopy, energy dispersive spectrometer and microindentation. At the molecular level, the chalky and the folia were assembled and determined through biomineralization based on the differences of soluble protein in layers. At the macro-scale, the granular SiO₂ particles deposited at the surface of shell layers or Ca(OH)₂ and grew into thin film, thus leading to mimic the morphology of substrate.     

A novel orthogonally linearly polarized Nd:YVO4 laser

We presented a novel orthogonally linearly polarized Nd:YVO₄ laser. Two pieces of a-cut grown-together composite YVO₄/Nd:YVO₄ crystals were placed in the resonant cavity with the c-axis of the two crystals orthogonally. The polarization and power performance of the orthogonally polarized laser were investigated. A 26.2-W orthogonally linearly polarized laser was obtained. The power ratio between the two orthogonally polarized lasers was varied with the pump power caused by the polarized mode coupling. The longitudinal modes competition and the corresponding variable optical beats were also observed from the orthogonally polarized laser. We also adjusted the crystals with their c-axis parallele to each other, and a 40.7-W linearly polarized TEM₀₀ laser was obtained, and the beam quality factors were M²_x=1.37 and M²_y=1.25.     

Immobilization of glucose oxidase using CoFe2O4/SiO2 nanoparticles as carrier

Aminated-CoFe₂O₄/SiO₂ magnetic nanoparticles (NPs) were prepared from primary silica particles using modified StÖber method. Glucose oxidase (GOD) was immobilized on CoFe₂O₄/SiO₂ NPs via cross-linking with glutaraldehyde (GA). The optimal immobilization condition was achieved with 1% (v/v) GA, cross-linking time of 3 h, solution pH of 7.0 and 0.4 mg GOD (in 3.0 mg carrier). The immobilized GOD showed maximal catalytic activity at pH 6.5 and 40 °C. After immobilization, the GOD exhibited improved thermal, storage and operation stability. The immobilized GOD still maintained 80% of its initial activity after the incubation at 50 °C for 25 min, whereas free enzyme had only 20% of initial activity after the same incubation. After kept at 4 °C for 28 days, the immobilized and free enzyme retained 87% and 40% of initial activity, respectively. The immobilized GOD maintained approximately 57% of initial activity after reused 7 times. The K_M (Michaelis-Menten constant) values for immobilized GOD and free GOD were 14.6 mM and 27.1 mM, respectively.     

Photoluminescence from xylene modified anatase TiO2 nanocrystals

The surface of anatase TiO₂ nanoparticles was modified by xylene using soxhlet extractor. The photoluminescence (PL) of the modified nanoparticles was investigated. A stable and strong blue luminescence peak at 420 nm can be observed, and the intensity of the PL peak increases with the increase of the extraction time.