Reduction of the fiber nonlinearity impairment using optical phase conjugation in 40 Gb/s CO-OFDM systems

In this paper, optical phase conjugation (OPC) located in the transmitter based on four wave mixing (FWM) in a semiconductor optical amplifier (SOA) is first simulated in 40 Gb/s CO-OFDM systems, and the fiber nonlinearity impairment of the transmission link is precompensated before OPC by transmission through a fiber with large nonlinearity coefficient. Simulation results show that the nonlinear threshold (NLT) can be increased by about > 3 dB and maximum Q factor can be increased by about 2 dB for the single-channel system. For 50-GHz-Spacing WDM systems, the maximum Q and NLT are increased by about 1 dB, even in the presence of cross phase modulation (XPM) from neighbouring WDM channels. It is found that this OPC subsystem located in the transmitter, not necessary to be inserted into the middle of link, can mitigate the fiber nonlinearity impairment for both single-channel and WDM systems.     

Investigations on order and width of RZ super Gaussian pulse in different WDM systems at 40 Gb/s using dispersion compensating fibers

In optical wavelength division multiplexed (WDM) systems the dispersion management is a key issue. In optical systems a lot of research is going on to reduce dispersion by selecting proper dispersion compensating techniques and proper modulation format for input data. One way to reduce dispersion is by using dispersion compensating fibers in the WDM systems. This paper analyzes the use of RZ super Gaussian pulse inputs for different WDM systems i.e. for conventional, dense and ultra dense WDM systems employing dispersion compensating fibers. The pulse width and the order of the RZ super Gaussian pulse was varied to evaluate the performance at 40 Gb/s. The experiment showed that to get minimum BER, pulse width of 7.5 ps and 10 ps along with third-order RZ super Gaussian pulse were found suitable and recommended to be used.     

Temperature effect on the tenability of an eight-channel demultiplexer

A new tunable wavelength division multiplexing (WDM) with a two-dimensional photonic crystal structure using (Multi-layer on InP substrate) is proposed. By tuning the temperature of the photonic crystal, the refractive index of the InP as well as the selected wavelengths can be changed. We show that the designed WDM has the ability to tune eight wavelengths by different values of temperature. The proposed filter has a cross section equal to 16.5 μm × 6.5 μm. The Results of the tenability has been done numerically by using the finite difference time domain (FDTD) method. We can use the proposed structure as temperature sensing device, and in many optical systems.     

Experimental demonstration of polarization multiplexing for simultaneously providing broadband wireless and wired access

A fiber-based wavelength-division-multiplexing (WDM) network utilizing polarization multiplexing (PolMUX) is proposed to simultaneously provide broadband wireless and wired services. In such a dual-service access network, the wireless and wired services are separately delivered in two orthogonal states of polarization with well independence in a single WDM channel. The impact of several polarization-dependent interferences becomes insignificant due to the relatively short transmission distance in access networks. The feasibility of PolMUX is experimentally demonstrated with a power penalty at BER = 10^-9 of about 0.5 dB and 1 dB for 2.5 Gb/s wired and wireless downstream services, respectively. The proposed system is compatible with the current reported techniques in either WDM passive optical networks (WDM-PON) or radio-over-fiber (ROF) systems.     

Investigation of wavelength division multiplexing ring network topology to enhance the system capacity

In this paper, we have investigated the wavelength division multiplexed (WDM) system using ring network topology. This network is used to increase the capacity with eight optical add/drop multiplexers (OADMs) by using dispersion compensating fiber and semiconductor optical amplifier (SOA) to achieve a distance up to 1600 km. It is observed that network shows the acceptable results at 15 Gbps data rate with 100 GHz channel spacing. The OADM nodes are also varied to investigate the network performance in the term of BER and Q-factor.     

Analysis of physical layer performance of hybrid optical-wireless access network

The hybrid optical-wireless access network (HOWAN) is a favorable architecture for next generation access network. It is an optimal combination of an optical backhaul and a wireless front-end for an efficient access network. In this paper, the HOWAN architecture is designed based on a wavelengths division multiplexing/time division multiplexing passive optical network (WDM/TDM PON) at the optical backhaul and a wireless fidelity (WiFi) technology at the wireless front-end. The HOWAN is proposed that can provide blanket coverage of broadband and flexible connection for end-users. Most of the existing works, based on performance evaluation are concerned on network layer aspects. This paper reports physical layer performance in terms of the bit error rate (BER), eye diagram, and signal-to-noise ratio (SNR) of the communication system. It accommodates 8 wavelength channels with 32 optical network unit/wireless access points (ONU/APs). It is demonstrated that downstream and upstream of 2 Gb/s can be achieved by optical backhaul for each wavelength channel along optical fiber length of 20 km and a data rate of 54 Mb/s per ONU/AP along a 50 m outdoor wireless link.     

400 Gbps WDM transmission over short range with discrete multi-tone

We simulate 400 Gbps WDM transmission system with DMT modulation. The system reaches 5 km SSMF with 100 Gbps per wavelength when the BER is 1e−3. From our analyses, we can see that DMT can be a promising solution for high capacity optical transmission system over short distance.     

A novel full duplex 16 Gbps SCM/ASK radio over fiber WDM-PON sharing wavelength for up- and down-link using bidirectional reflective filter

In this paper, a new bidirectional wavelength division multiplexing radio-over-fiber (WDM-RoF) using Subcarrier Multiplexing/Amplitude Shift Keying (SCM/ASK) is proposed which shares the same wavelengths for both up-link and down-link. A bidirectional reflective filter (BRF) is utilized in the upstream link to provide a reliable bidirectional optical channel. WDM is used to further increase the capacity of system. Simulation of the proposed scheme demonstrates 1 Gbps down- and up-link data stream for 16 channels over the length of 25 km with acceptable Q-factor (>6 dB).     

Fiber-wireless (FiWi) access network: Performance evaluation and scalability analysis of the physical layer

The fiber-wireless (FiWi) access network is a prestigious architecture for next generation (NG) access network. NG access networks are proposed to provide high data rate, broadband multiple services, scalable bandwidth, and flexible communication for manifold wireless end-users (WEUs). In this paper, the FiWi access network is designed based on a wavelengths division multiplexing/time division multiplexing passive optical network (WDM/TDM PON) at the optical backhaul with data rate of 2.5 Gb/s and wireless fidelity-worldwide interoperability for microwave access (WiFi–WiMAX) technologies at the wireless front-end along a 50 m–5 km wireless links with data rate of 54–30 Mb/s, respectively. The performance of the optical backhaul and the wireless front-end, in the proposed FiWi access network, has been evaluated in terms of bit error rate (BER), error vector magnitude (EVM), and signal-to-noise ratio (SNR) of the physical (PHY) layer. The scalability of the optical backhaul based on maximum split ratio of 1/32 for each wavelength channel and a fiber length of 24 km from the central office (CO) to the access point (AP) is analyzed with bit error rate (BER) of 10⁻⁹.     

Analysis and minimization of cross phase modulation in semiconductor optical amplifiers for multichannel WDM optical communication systems

A theoretical model for crosstalk in multichannel wavelength division multiplexing communication systems due to cross phase saturation in semiconductor optical amplifier structure is developed. This theoretical model is used to analyze the impact of the cross phase noise on the performance of semiconductor optical amplifiers in saturation region for WDM communication system by using differential phase shift modulation format. It is shown that by increasing the carrier life time, width and thickness while reducing the confinement factor, differential gain and bias current in the SOA structure mitigates the cross talk due to cross phase saturation. The impact of penalty and cross phase noise imposed on multichannel WDM links have been investigated for different parameters of the SOA with the variation in transmission distance. With the slight increase in differential gain of 200.2 × 10⁻¹⁸ cm² and confinement factor 0.41, the maximum transmission distance observed is 5220 km with good quality and nil power penalty for 10 × 40 Gb/s soliton RZ-DPSK WDM signals for the first time.     

An improved channel estimation method for a WDM transmission system derived from the CO-OFDM with PDM 64-QAM

In this study, firstly we presented a wavelength division multiplexed (WDM) transmission system derived from the coherent optical orthogonal frequency division multiplexing (CO-OFDM) with polarization division multiplexing (PDM) and 64 order quadrature amplitude modulation (QAM). We then proposed an improved channel estimation method based on discrete Fourier transform for the system to further improve the performance of the WDM transmission system. Under the experimental conditions employed, the principle and the spectral efficiency of the system, including a proposed algorithm to improve its performance (e.g. the robustness of the transmission impairments of the system) were studied. The simulations results demonstrated that our method improved the system efficient significantly. The system signal at 24 Tb/s can achieve a spectral efficiency of 12.5 bit/s/Hz up to a distance of 2000 km.     

Cross-phase modulation induced phase fluctuations in optical RZ pulse propagating in dispersion compensated WDM transmission systems

The basic mechanism of cross-phase modulation induced phase fluctuations in optical RZ pulse propagating in a periodically dispersion compensated transmission line has been investigated. Ordinary differential equations have been derived using variational analysis to estimate the phase fluctuation and the analytical result is verified by numerical simulations based on split-step Fourier method. We therefore explore the impact of different dispersion compensation maps on phase fluctuation for 10 Gb/s and 40 Gb/s WDM transmission systems. The effects of initial pulse spacing between channels, channel spacing and residual dispersion on phase shift have been studied. We find that cross-phase modulation induced phase fluctuation can be mitigated by proper adjustment of channel spacing and/or residual dispersion.     

Design of thermo-optic tunable optical filter based on Si/Air DBR and polymer Fabry–Perot microcavity in SOI

An integrated tunable optical filter (TOF) based on thermo-optic effect in silicon on insulator (SOI) rib waveguide is designed and simulated. The device is comprised of two high refractivity contrast Si/Air stacks, functioning as high reflectivity of DBRs (distributed Bragg reflectors) and separating by a variable refractive index polymer Fabry–Perot (F–P) cavity. The designed device exhibits Q = 24077, FWHM = 0.065 nm and finesse = 566. Wavelength tuning is achieved through thermal modulation of refractive variation of the cavity. As the cavity polymer is heated, the refractive index of the cavity decreases. When the temperature of cavity polymer changes within 105, the central wavelength gets a continuous 35 nm shift from 1530 nm to 1565 nm, which can operate the whole C-band in the WDM (wavelength division multiplexing) networks. Moreover, by calculating, the tuning sensitivity is about 0.33 nm/°C. Owing to the compact size and excellent characteristics of integration, the proposed component has a promising utilization in spectroscopy and optical communication.     

50 km bidirectional FTTH transmission comparing different PON standards

In this paper, a bidirectional Fiber To The Home (FTTH) is proposed where WDM transmitter is used as a seeding source with wavelength of 1550 nm. The system utilizes a Travelling wave Semiconductor Optical Amplifier (TSOA) with injection current 0.15A. 50 km range FTTH architecture is demonstrated for both downstream and upstream channels. We investigated the impact of different data rates on upstream and downstream data. The BER results show that the performance of our scheme is good for 10 Gbps system for downstream transmission as it accommodates 64 ONUs. From simulation results show the BER of 9.95e-009 is reported at 15 Gbps but only in case of 32 ONUs. Similarly, in case of upstream transmission, Q-Factor of 15.04 dB is reported for 32 ONUs. So this scheme is a practical solution to meet the data rate of the optical links simultaneously in tomorrow's PON access networks.     

Optical 3R regeneration of 40 Gbit/s degraded data signals

A 40 Gbit/s optical 3R regenerator is proposed and demonstrated. The 3R regenerator consists of a dual-ring injection mode-locked fiber ring laser as the clock recovery module and an electroabsorption modulator (EAM) as the decision gate. The clock recovery module extracts the optical short pulse clock with low timing jitter from degraded 40 Gbit/s optical data streams, while the decision gate restores their signal quality. A numerical model describing the cross-absorption modulation effect in a bulk EAM is developed to explore the operating conditions, such as bias voltage, pump signal power. The timing jitter tolerance for the EAM optical gate is also investigated. Significantly improvement of BER is obtained from 40 Gbit/s RZ signals which are degraded by polarization mode dispersion or chromatic dispersion.     

Analysis of linewidth and extinction ratio in directly modulated lasers for performance optimization in 10 Gbit/s CWDM systems

Direct Modulation Lasers (DMLs) have attracted increased attention during the past few years because of their intrinsic simplicity and cost-effectiveness, especially when applied to WDM metro and access networks. However, the output power waveform from a directly modulated laser is not an exact replica of the modulation current and its instantaneous optical frequency varies with time depending on the changes in optical power and the extinction ratio (ER) (an effect also known as frequency chirp). In this work, using an Optical Communication System Design Software, we have studied a directly modulated WDM 10 Gb/s system which transmission performance depends strongly on DML characteristics; simulation results have provided supplementary details about the effects of DML type (adiabatic or transient chirp dominated) as well as the effects of the optical output power. These details can provide useful design guidelines for constructing a WDM metro network.     

Optimization of free space optics parameters: An optimum solution for bad weather conditions

Free Space Optics Systems (FSO) is one of the most effective solutions, especially for atmospheric turbulence due to the weather and environment structure. Free space optics system suffers from various limitations. A well-known disadvantage of FSO is its sensitivity on local weather conditions-primarily to haze and rain, resulting in substantial loss of optical signal power over the communication path. The main objective of this article is to evaluate the quality of data transmission using Wavelength Division Multiplexing (WDM) with highlighting several factors that will affect the quality of data transmission. The results of these analyses are to develop a system of quality-free space optics for a high data rate transmission. From the result analysis, FSO wavelength with 1550 nm produces less effect in atmospheric attenuation. Short link range between the transmitter and receiver can optimize the FSO system transmission parameters or components. Based on the analysis, it is recommended to develop an FSO system of 2.5 Gbps with 1550 nm wavelength and link range up to 150 km at the clear weather condition of bit-error-rate (BER) 10⁻⁹.     

Performance enhanced down-stream signalling for next generation long-reach 10 Gbit/s passive optical networks

In this paper, we have analyzed the signal processing methods both in digital and optical domain to enhance the transmission performance of downstream signalling in long reach passive optical networks (LR-PONs). The impact of non-linear (NL) equalization through signal processing, i.e. Volterra Equalization (VE), Digital Backpropagation (BP) and Optical Phase Conjugation with Non-linearity Module (OPC-NM) is investigated, in 10 Gbit/s (XG) DP-QPSK long-reach wavelength division multiplexed (WDM) PONs without midspan repeaters over 120 km standard single mode fibre (SMF) link for down-stream signals. Due to the compensation of optical Kerr effects, the sensitivity penalty is reduced to 2 dB by BP algorithm, 1.5 dB by VE algorithm and 2.69 dB by OPC-NM. Moreover, with the implementation of NL equalization technique we are able to get the transmission distance of 126.6 km SMF for the 1:1024 split-ratio at 5 GHz channel spacing in the non-linear region. Furthermore, the concept of super passive optical network (S-PON) is also evaluated, which involves a repeater stage consisting of optical amplifiers, to study the feasibility for receiver side signal processing and simplification.     

Space radiation effect on EDFA for inter-satellite optical communication

The erbium-doped fiber (EDF) has been irradiated by electron with a dose of 1000 krad to analyse the space radiation effect on EDF amplifier (EDFA) in inter-satellite optical communication. This is the first work to analyse the effect on actually applied systems. Three critical parameters of EDFA, most important for external module subsystems, have been tested. The output power comes down to −57.21 dBm and the noise figure (NF) climbs up to 18.14 dB at dose 1000 krad, when the input power is −2.00 dBm. Although there is a strong ability to recover after the radiation experiment, EDFA deterioration is really huge. Apart from that, the central wavelength of EDFA never changes. To guarantee the accuracy of analysis of the radiation effect on EDFA, WDM coupler and isolator are also irradiated with the EDF at the same time. According to the results of all the tests, the EDFA could be directly used in the low-radiation dose orbits if doses are less than 20 krad. And the radiation experiment data will also be a good reference for the design of the actual systems in inter-satellite optical communication with different dose orbits.     

Absolute polar duty cycle division multiplexing over wavelength division multiplexing system

The performance of absolute polar duty cycle division multiplexing (AP-DCDM) over wavelength division multiplexing (WDM) system is presented based on the simulation results. The AP-DCDM signal has narrower bandwidth than conventional time division multiplexing (TDM) signal, which makes its implementation in WDM system advantageous. In this paper, characteristics of AP-DCDM and TDM signals in WDM system are compared at the speed of 40 Gbit/s per channel, for the minimum allowed channel spacing and the chromatic dispersion tolerance. The results clearly show that AP-DCDM performs significantly better than TDM. By using AP-DCDM, 1.28 Tbit/s (32 × 40 Gbit/s) was successfully transmitted over 320 km standard single mode fiber. Spectral efficiency of 0.64 b/s/Hz was achieved by using 10 Gbit/s transmitters and receivers without polarization multiplexing.