Critical coupling in a Fabry-Pérot cavity with metamaterial mirrors

We study critical coupling (CC) in a system of a dielectric layer sandwiched between two metamaterial layers leading to near-total suppression of both reflection and transmission at specified frequencies. The tunability of the CC frequency is demonstrated by varying the angle of incidence retaining the full causal response for the metamaterials.     

Tunable out-of-plane band gap of two-dimensional anisotropic photonic crystals infiltrated with liquid crystals

We analyze the tunability of out-of-plane band gap in two-dimensional photonic crystals created by square and triangular lattices of air holes in anisotropic tellurium background, considering that the rods are infiltrated with liquid crystal. Using the plane wave expansion method, we study the variation of out-of-plane band gap by changing the optical axis orientation of liquid crystal.     

Cavity modes in one-dimensional photonic crystal slabs

A theoretical study of cavity modes in one-dimensional photonic crystal slabs embedded in Silicon-on-Insulator structures is reported. Three different methods are employed, namely a guided-mode expansion in which the coupling to radiative modes is treated by perturbation theory, a grating or scattering-matrix method for calculating the surface reflectance, and a Fourier modal expansion for in-plane transmission calculations. It is shown that all methods lead to the same values for the quality factors of cavity modes for both first- and second-order Bragg mirrors. We conclude that the quality factor of a cavity mode can be determined with optical reflectance from the surface of the slab.     

Error analysis of dual wavelength quadrature phase demodulation for low-finesse Fabry-Pérot cavity based fibre optic sensor

An analysis of the errors in the dual wavelength quadrature phase demodulation technique for low-finesse Fabry-Pérot cavity based fibre optic sensor is presented. A simple numeric model for calculating the error is established. For sensors that experience only small cavity length changes during measurement, a simplified analytical expression of relative error is also derived. Errors for various sets of interrogation wavelengths are calculated and analyzed. The results show that two wavelengths with very slight difference should be chosen to avoid significant errors.     

Tuning of full band gap in anisotropic photonic crystal slabs using a liquid crystal

We analyze the tunability of full band gap in photonic crystal slabs created by square and triangular lattices of air holes in anisotropic tellurium background, considering that the regions above and below the slab are occupied by SiO₂ and the holes are infiltrated with liquid crystals. Using the supercell method based on plane wave expansion, we study the variation of full band gap by changing the optical axis orientation of liquid crystal. Our results demonstrate the existence and remarkable tunability of full band gap in both square and triangular lattices, largest band gap and tunability being obtained for the triangular lattice.     

Experimental evidence of photonic band gap extension for disordered 1D photonic crystals based on Si

We have shown theoretically and experimentally the possibility of PBG extension by introducing a silicon wall thickness disorder into the photonic structure. Experiments have been conducted in the infrared spectrum range and calculations have been performed for 1D photonic crystals based on a grooved-silicon structure.     

一维磁化等离子体光子晶体非互易特性研究

在理想条件下,为了研究等离子体回旋频率、等离子体频率、等离子体层厚度、周期常数和入射角在TM模式下对一维磁化等离子体光子晶体的非互易特性的影响,用利用传输矩阵法计算得到的TM波正向和反向传播的透射率来研究其非互易特性。研究结果表明,增加等离子体回旋频率和入射角度能够改善非互易特性;而一味地增加等离子体频率和等离子体层厚度将会使得非互易传播特性变得恶化;增加周期常数不能明显地改善非互易传播特性,但是通过改变外加磁场的施加方式能够改善其非互易特性。     

Analysis of photonic crystal fibers infiltrated with nematic liquid crystal

The spectral characteristic of a nematic liquid crystal photonic crystal fiber is analyzed. The locations of the transmission minima in the transmission spectrum can be evaluated by examining the modal cutoffs of specific modes in the liquid crystal inclusion. The selection criteria for these specific modes are based on the fraction of power residing in the core. Explicit expressions for these modal cutoffs are also derived.     

The effect of random variations of structure parameters on photonic band gaps of one-dimensional plasma photonic crystals

The electromagnetic properties of one-dimensional plasma photonic crystals influenced by random perturbation of structure parameters are studied through transfer matrix method in the paper. The random perturbation of thicknesses of layers as well as plasma frequency of layers can influence the electromagnetic properties of one-dimensional plasma photonic crystal. The random perturbation of thicknesses of layers tremendously impacts the band structure of one-dimensional plasma photonic crystals in high frequency domain. The random perturbation of plasma frequency, however, contributes to the moving of a cutoff frequency in the low frequency domain. The position of the defect mode of one-dimensional plasma photonic crystal randomly moves due to the random perturbations. The effect of random perturbation of plasma frequency is more significant than that of random perturbation of thickness of layers, which alters not only the transmittance but also the position of the defect mode. An improved quality factor and a shortened moving distance of the defect mode are both acquired by increasing the period number. And then this work may provide a crude but useful instrument in analyzing disordered 1DPPCs.     

Optical transmission properties of an anisotropic defect cavity in one-dimensional photonic crystal

We investigate theoretically the possibility to control the optical transmission in the visible and infrared regions by a defective one dimensional photonic crystal formed by a combination of a finite isotropic superlattice and an anisotropic defect layer. The Green's function approach has been used to derive the reflection and the transmission coefficients, as well as the densities of states of the optical modes. We evaluate the delay times of the localized modes and we compare their behavior with the total densities of states. We show that the birefringence of an anisotropic defect layer has a significant impact on the behavior of the optical modes in the electromagnetic forbidden bands of the structure. The amplitudes of the defect modes in the transmission and the delay time spectrum, depend strongly on the position of the cavity layer within the photonic crystal. The anisotropic defect layer induces transmission zeros in one of the two components of the transmission as a consequence of a destructive interference of the two polarized waves within this layer, giving rise to negative delay times for some wavelengths in the visible and infrared light ranges. This property is a typical characteristic of the anisotropic photonic layer and is without analogue in their counterpart isotropic defect layers. This structure offers several possibilities for controlling the frequencies, transmitted intensities and the delay times of the optical modes in the visible and infrared regions. It can be a good candidate for realizing high-precision optical filters.     

基于等离子体缺陷层的一维可调谐微波光子晶体滤波特性

等离子体填充到一维介质-真空微波光子晶体的缺陷层构成一种可调谐单通道滤波器.据等离子体的强色散特性,其等效折射率与电磁波频率及等离子体频率等参数有关,因而可以通过改变等离子参数,使一维微波光子晶体缺陷层的谐振频率发生偏移,实现微波光子晶体的可调谐滤波特性.介质层和等离子体层分别采用了时域有限差分（FDTD）算法及分段线性电流密度卷积时域有限差分（PLJERC-FDTD）算法.数值模拟表明,通过改变等离子体频率可以实现滤波通道在光子禁带内较大带宽范围的移动. 关键词： 等离子体 微波光子晶体 可调谐滤波     

Properties of the defect mode in one-dimensional ferroelectric Si/C60 photonic crystals

In the present paper, a novel photonic crystal (PC) defect mode is designed by inserting a ferroelectric material layer (LiNbO₃) into Si/C₆₀ one-dimensional PCs. The band structure of the ferroelectric PCs is numerically analyzed by the transfer matrix method (TMM). The width of the photonic band gap increases by 80 nm and a defect mode appears at a central wavelength of 680 nm when a 150 nm LiNbO₃ layer is inserted into the Si/C₆₀ PC structure. The defect mode in the band gap shifts linearly with the change in electric field. The defect mode shifts by 11.2 nm toward shorter wavelengths when the thin film is subjected to a DC voltage of 1 KV.     

Experimental investigation of photonic band gap in one-dimensional photonic crystals with metamaterials

Composite right/left-handed transmission lines with lumped element series capacitors and shunt inductors are used to experimentally realize the one-dimensional photonic crystals composed of single-negative metamaterials. The simulated and experimental results show that a special photonic band gap corresponding to zero-effective-phase (zero-_φeff${\phi }_{\mathrm{eff}}$) may appear in the microwave regime. In contrast to the Bragg gap, by changing the length ratio of the two component materials, the width and depth of the zero-_φeff${\phi }_{\mathrm{eff}}$ gap can be conveniently adjusted while keeping the center frequency constant. Furthermore, the zero-_φeff${\phi }_{\mathrm{eff}}$ gap vanishes when both the phase-matching and impedance-matching conditions are satisfied simultaneously. These transmission line structures provide a good way for realizing microwave devices based on the zero-_φeff${\phi }_{\mathrm{eff}}$ gap.     

Polarization dependent guiding in liquid crystal filled photonic crystal fibers

A theoretical study of nematic liquid crystal filled photonic crystal fibers (LCPCFs) is presented. Detailed investigations including the polarization dependent bandgap formation and the modal properties are given for LCPCFs, in which alignment of the molecules could be controlled by external static electric field. The polarization dependent bandgap splitting caused by the high index difference between the ordinary and the extraordinary dielectric index of nematic liquid crystals provides the possibility of single-mode single-polarization guiding. A polarization operation diagram is proposed to describe the guiding behavior of LCPCFs. The influence of rotation angle ? of the director of liquid crystals on the modal properties is investigated. It is shown that the polarization axis of the guided mode is determined by the rotation angle ?, which could be controlled by external electric field.     

Graphene based photonic crystal optical filter: Design and exploration of the tunability

Optical characteristics of two new graphene based photonic crystals are studied in detail. A structure containing alternating layers of graphene and SiO₂ slabs is considered as the ideal crystal. The dependency of the photonic band gaps (PBGs) to the dielectric layer thickness and the period number is explored at first step. Potential of the proposed crystal to be used as an optical filter is then investigated. Adding a nonlinear electro-optic polymer as a defect layer, the alterations of the optical features are inspected. Results show that the defect layer insertion causes a resonant mode inside the PBGs. However, the location of the defect layer inside the crystal is very effective on both the frequency and width of the resonant mode. Tunability of the optical features is probed by taking into account of the dependencies to the wave incident angle, graphene chemical potential and the applied external voltage to the defect layer.     

Anisotropic photonic crystals: Generalized plane wave method and dispersion symmetry properties

This article presents a generalized vector plane wave expansion method, applicable to isotropic and anisotropic periodic dielectric media of arbitrary geometry and dimension. The influence of anisotropic material orientation on the symmetry properties of photonic crystal dispersion surface is discussed. It is shown that the overall Brillouin zone symmetry is formed by the intersection of the photonic crystal lattice symmetry and the symmetry determined by the anisotropic material orientation. This work explains how to define the irreducible Brillouin zone of a two-dimensional anisotropic photonic crystal and demonstrates that doing it correctly allows one to avoid erroneous results, when calculating band gap diagrams of anisotropic photonic crystals. With the help of the methods presented, the possibility of controlling the band gaps of anisotropic photonic crystals by means of external electric field is shown.     

Omnidirectional reflector using one-dimensional dispersive photonic heterostructure

We present theoretical design for omnidirectional reflector (ODR) using one-dimensional photonic heterostructure. With the help of transfer matrix approach, we present a simple design to achieve the ODR at a desired wavelength range of interest using a high refractive index material which is dispersive at that wavelength range. Taking material combinations of SiO₂ and GaSb as low and high index medium a perfect ODR is designed in the 1480–1680 nm wavelength region.     

T-shaped channel drop filter based on photonic crystal ring resonator

Photonic crystal ring resonators are promising candidates for realizing all optical filters with acceptable transmission efficiency and quality factor values. In this paper, by putting a12-fold quasi crystal at the middle of on 7 × 7 square cavity we created a ring resonator structure and designed a T-shaped channel drop filter. The drop wavelength of our filter is at 1551 nm, with transmission efficiency and quality factor equal to 90% and 387. Our structure is composed of dielectric rods immersed in air. Because in this kind of structures the dominant band gap is in TM mode, all of our simulations have been done in TM mode. The total footprint of our filter is 242.4 μm², which makes it suitable for all optical integrated circuits.     

Electric field tunable photonic Hall effect with liquid crystals

The Mie theory for electromagnetic scattering is extended to the case of coated metal sphere with liquid crystals. A new set of vector basis functions for the electric displacement vector inside the liquid crystal layer has been constructed. The expansion coefficients of transmitted and scattered fields are obtained analytically by applying the continuous boundary conditions. The dependence of the scattering property on the geometrical parameters has been investigated in detail. The appearance of photonic Hall effect for such a Mie scatterer is confirmed. It is interesting that such a photonic Hall effect not only depends on the ratio of the inner to outer radius of coated sphere, it is also tunable by the application of an external voltage.