Anodic stripping voltammetric determination of thallium as [TlBr4]-rhodamine B complex

The anodic stripping voltammetric behaviour of the [TlBr₄]-rhodamine B complex is described and compared with that of thallium(I) and thallium(III) ions. The electrolyte composition, the best potential for the deposition of thallium from the complex in the selected electrolyte, the duration of the electrolysis, and the possibility of reduction of thallium in the [TlBr₄]-rhodamine B complex before the electrolysis with ascorbic acid were investigated. The results showed good reproducibility of the measurements of thallium as [TlBr₄]-rhodamine B complex and are similar to those obtained for thallium as Tl(I) and Tl(III) ions. As the [TlBr₄]-rhodamine B complex is strongly adsorbed on polyethylene, a previous preconcentration step on a column, packed with polyethylene powder, allowed the voltammetric determination of thallium as [TlBr₄]-rhodamine B complex in samples of KCl and NaCl as solid salts after the separation of the matrix. With this procedure it was possible to reach enrichment factors of 25 with recoveries from 96.7 to 107.9% for thallium concentrations from 5 to 40 μg L^–1 and RSD between 4.2 and 9.2%. The procedure was used to determine thallium traces in KCl and in sea salt. The results of these determinations were compared with the results obtained by graphite furnace atomic absorption spectrometry.     

Anodic stripping voltammetric determination of antimony in gunshot residue

Anodic stripping voltammetry (a.s.v.) ata mercury film on a glassy carbon working electrode was utilized to determine the amount of antimony from hand swabs. The procedure described is useful for determining 10–120 ng of antimony found in the residue ou the hands of an individual suspected of discharging or handling a firearm. The voltammogram provides an elemental pattern recognizable as gunshot residue containing small amounts of antimony and much larger amounts of copper and lead. The amount of antimony in a variety of gunshot-residue samples was determined by both anodic stripping voltammetry and graphite-furnace atomic absorptiou spectrometry for comparison purposes. Anodic stripping voltammetry is excellent for observation of the multielement pattern which proves to be very useful for gunshot-residue samples.     

Adsorptive stripping voltammetric determination of vanadium as chloranilic acid complex

Traces of vanadium(V) can be determined up to 21 ng/l by adsorptive stripping voltammetry using 2,5-dichloro-1,4-dihydroxy-3,6-benzoquinone (chloranilic acid) as complex forming reagent. The complex is stable in a 0.1 mol/l acetate buffer (pH 4.6) solution and adsorbed at the electrode surface in a potential range between –150 mV and –400 mV. The adsorption process is solved by alternating current (ac) voltammetric measurements. The method is applied to different real samples.     

Anodic stripping voltammetric determination of vardenafil hydrochloride at pencil graphite electrode

In this paper, we present a very popular and low-cost sensor material as disposable pencil graphite electrode (PGE) system for the trace-level determination of vardenafil hydrochloride (VRL). Electrochemical behavior and determination of VRL was carried out by cyclic and square-wave adsorptive anodic stripping (SW-AdAS) voltammetry. The proposed method was highly sensitive and had a linear calibration range from 3 × 10^?10 to 1 × 10^?7 M with a correlation coefficient of 0.997. The limit of detection and limit of quantitation values were calculated as 1 × 10^?10 and 3 × 10^?10 M, respectively. Developed method with disposable PGE shows high sensitivity, selectivity and stability in a wide concentration range for VRL determination without the necessity of any modification. Additionally, this system was successfully applied in Levitra^® tablets and spiked human serum in trace level of VRL. Some kinetic parameters of VRL’s were represented for the first time. The results showed that the proposed method is highly sensitive, easy and low cost for trace-level determination of VRL.     

Anodic stripping voltammetric determination of lead and cadmium in soil extracts

Two single-step extraction procedures validated by BCR, extraction with 0.43 mol dm⁻³ acetic acid and 0.05 mol dm⁻³ EDTA, are used for assessing bioavailable species of Pb and Cd in soils. After an extensive study of interferences of humic substances and using standard additions procedures, the extractable contents of Pb and Cd have been determined by DPASV directly in soil extracts with a good reproducibility (RSD varied from 1.0 to 7.9 %). Pb(II) and Cd(II) were released from complex in EDTA extracts by pH adjustment to 1 with 1 mol dm⁻³ HCl. The results were compared with those obtained with atomic absorption spectrometry and indicated reasonable agreement of both methods. Exchangeable forms represented 0.2 to 3.3 % and 13.0 to 63.6 % of total content of Pb and Cd in soils, respectively. EDTA extraction released from soils 7.9 to 29.9 % and 33.5 to 59.6 % of total content of Pb and Cd, respectively.     

Anodic stripping voltammetric determination of heavy metals in solutions containing humic acids

Summary Various simultaneous effects of humic acids on the current and potential of differential pulse anodic stripping peaks of copper, lead, cadmium and zinc in weakly alkaline and acidic (pH 2) solutions have been investigated and interpreted with regard to metal complexation and the adsorption of humic acid on the mercury electrode. The applicability of the standard additions method for metal quantitation and the experimental conditions for UV-photolysis with a high-pressure mercury lamp have been examined in model as well as real water samples.     

Anodic stripping voltammetric determination of silver(I) in water using a 4-tert-butyl-1(ethoxycarbonylmethoxy)thiacalix[4]arene modified glassy carbon electrode

A glassy carbon electrode coated with film of 4-tert-butyl-1-(ethoxycarbonylmethoxy)thiacalix[4]arene is designed for the determination of trace amounts of Ag⁺. Compared with bare glassy carbon electrode, the modified electrode can greatly improve the measuring sensitivity for Ag⁺. Under the optimum experimental conditions, the modified electrode in B-R buffer solution (pH 4.5) shows a linear voltammetric response in the range of 5.0 × 10⁻⁸–3.0 × 10⁻⁶ M with detection limit 1.0 × 10⁻⁸ M for Ag⁺. The high sensitivity, selectivity, and stability of modified electrode also demonstrate its practical application for a simple, rapid and economical determination of Ag⁺ in water samples.     

Anodic stripping voltammetric determination of mercury by use of a sodium montmorillonite-modified carbon-paste electrode

A sodium montmorillonite (SWy-2)-modified carbon-paste electrode has been examined for determination of trace levels of mercury. Because of its strong cation-exchange and adsorptive characteristics, SWy-2 greatly improves the sensitivity of determination of Hg(2+). Hg(2+) is preconcentrated and reduced on the modified electrode surface at -0.40 V and then stripped from the electrode surface during the positive potential sweep. The conditions used for determination, e.g. supporting electrolyte, pH, amount of SWy-2, accumulation potential, and accumulation time, were optimized. The peak current was linearly dependent on the concentration of mercury from 1 x 10(-9) to 5 x 10(-7) mol L(-1). The detection limit (signal-to-noise ratio=3) was 1 x 10(-10) mol L(-1) after accumulation for 6 min. When the SWy-2-modified carbon-paste electrode was used to detect mercury in water samples the average recovery was 101.11%.     

Anodic stripping voltammetric determination of Zn, Pb and Cu traces in whisky samples

The simultaneous “in natura” determination of trace Zn, Pb and Cu in whisky samples by anodic stripping voltammetry (ASV), using a hanging mercury drop electrode, without previous treatment or addition of supporting electrolyte is described. The choice of an appropriate stripping voltammetric method and deposition potential minimizes the influence of the organic content and ensures a good reproducibility of the measurements. The reliability of the method was tested comparing the results with those of atomic absorption spectroscopy (AAS), with differences of about 10%. The method allows the determination of heavy metal ions in the μg L^–1 range. Received: 14 August 1997 / Revised: 10 December 1997 / Accepted: 11 December 1997     

Anodic stripping voltammetric determination of trace lead with a nafion/crown-ether film electrode

An electrode for the anodic stripping voltammetric determination of trace lead has been made by coating glassy carbon with a film of Naflon in which a crown ether is incorporated. The sensitivity is increased because of continuous transfer of lead from solution to the electrode surface by complexation with the crown ether and reduction during the deposition period. A detection limit of 5 x 10(-10)M has been obtained by electrodeposition for 3 min. The method is sensitive, simple and relatively rapid, with a relative standard deviation of 8% at the 2 x 10(-9)M level.     

Anodic stripping voltammetric determination of Zn, Pb and Cu traces in whisky samples

The simultaneous “in natura” determination of trace Zn, Pb and Cu in whisky samples by anodic stripping voltammetry (ASV), using a hanging mercury drop electrode, without previous treatment or addition of supporting electrolyte is described. The choice of an appropriate stripping voltammetric method and deposition potential minimizes the influence of the organic content and ensures a good reproducibility of the measurements. The reliability of the method was tested comparing the results with those of atomic absorption spectroscopy (AAS), with differences of about 10%. The method allows the determination of heavy metal ions in the μg L^–1 range.     

Adsorptive stripping voltammetric determination of antimony

A new method is described for the determination of antimony based on the cathodic adsorptive stripping of Sb(III) complexed with 2′,3,4′,5,7-pentahydroxyflavone(morin) at a static mercury drop electrode (SMDE). The reduction current of the adsorbed antimony complex was measured by 1.5th-order derivative linear-sweep adsorption voltammetry. The peak potential is at −0.51 V (vs. SCE). The effects of various parameters on the response are discussed. The optimized analytical conditions were found to be: supporting electrolyte, chloroacetic acid (0.04 mol/l, pH 2.3); concentration of morin, 5×10⁻⁶ mol/l; accumulation potential, −0.25 V (vs. SCE); scan rate, 100 mV/s. The limit of detection and the linear range were 7×10⁻¹⁰ mol/l and 1.0×10⁻⁹3.0×10⁻⁷ mol/l Sb(III) for a 2-min accumulation time, respectively. This method has been applied to the determination of Sb(III) in steel and brass samples and satisfactory results were obtained. The adsorptive voltammetric characteristics and composition of the Sb(III)–morin complex were studied.     

Adsorptive stripping voltammetric determination of ofloxacin

The fluoroquinolone antibacterial agent ofloxacin was studied by adsorptive stripping voltammetry. Controlled interfecial accumulation of ofloxacin on a static mercury drop electrode in the hanging mercury drop mode provides high sensitivity. The linear concentration range was 0.079–197.5 μg ml^?1 when using a 60-s preconcentration at ?1 V vs. Ag/AgCl in Britton-Robinson buffer of pH 6.00. The detection limit of ofloxacin was 1 ng ml^?1. The precision is excellent with a relative standard deviation of ca. 0.75% at a concentration of 0.848 μg ml^?1.     

Anodic stripping voltammetric determination of mercury using multi-walled carbon nanotubes film coated glassy carbon electrode

An electrochemical method for the determination of trace levels of mercury based on a multi-walled carbon nanotubes (MWNT) film coated glassy carbon electrode (GCE) is described. In 0.1 mol L^–1 HCl solution containing 0.02 mol L^–1 KI, Hg²⁺ was firstly preconcentrated at the MWNT film and then reduced at –0.60 V. During the anodic potential sweep, reduced mercury was oxidized, and then a sensitive and well-defined stripping peak at about –0.20 V appeared. Under identical conditions, a MWNT film coated GCE greatly enhances the stripping peak current of mercury in contrast to a bare GCE. Low concentrations of I^– remarkably improve the determining sensitivity, since this increases the accumulation efficiency of Hg²⁺ at the MWNT film coated GCE. The stripping peak current is proportional to the concentration of Hg²⁺ over the range 8×10^–10–5×10^–7 mol L^–1. The lowest detectable concentration of Hg²⁺ is 2×10^–10 mol L^–1 at 5 min accumulation. The relative standard deviation (RSD) at 1×10^–8 mol L^–1 Hg²⁺ was about 6% (n=10). By using this proposed method, Hg²⁺ in some water samples was determined, and the results were compared with those obtained by atomic absorption spectrometry (AAS). The two results are similar, suggesting that the MWNT-film coated GCE has great potential in practical analysis.     

Anodic stripping voltammetric determination of bismuth(III) using a Tosflex-coated mercury film electrode

A Tosflex-mercury film electrode (TMFE) was prepared by spin-coating a solution of the perfluorinated anion exchange polymer Tosflex onto a glassy carbon electrode surface followed by electrodeposition of mercury film on this electrode. This electrode was used for the determination of trace bismuth(III) which was preconcentrated onto the TMFE as anionic bismuth(III) complexes with chloride in a chloride medium. The preconcentration was carried out at a potential of-0.2 V, and the preconcentration of the bismuth(III) was enhanced significantly by the anion-exchange feature of Tosflex. The accumulated bismuth(III) was then determined by anodic square-wave stripping voltammetry (SWSV). Various parameters influencing the determination of bismuth(III) were examined in detail. With 2 min accumulation, the analytical signal versus concentration dependence was linear up to 50 ppb, and the detection limit was 0.58 ppb. This modified electrode showed good resistance to the interferences from surface-active compounds and common ions.     

A direct differential pulse anodic stripping voltammetric method for the determination of thallium in natural waters

A dual direct method for the ultratrace determination of thallium in natural waters by differential pulse anodic stripping voltamrnetry (d.p.a.s.v.) is presented. D.p.a.s.v. at the hanging mercury drop electrode and at the mercury film electrode is used in the concentration ranges 0.5–100 μg Tl l^-1, and 0.01–10 μg Tl l^-1, respectively. Quantification is aided by the technique of standard additions. The response of the method is optimized for typical natural surface water matrices. An intercomparison of thalium determinations performed by the two anodic stripping methods and electrothermal-atomization atomic absorption spectrometry on normal and thallium-spiked surface water samples demonstrates equivalent accuracy within the range where atomic absorption is applicable. The method appears free from serious interferences.     

Anodic stripping voltammetric determination of silver ion at a carbon paste electrode modified with carbon nanotubes

A carbon paste electrode (CPE) was modified with multi-wall carbon nanotubes and successfully applied to the determination of silver ion by differential pulse anodic stripping voltammetry. Compared to a conventional CPE, a remarkably improved peak current response and sensitivity is observed. The analytical procedure consisted of an open circuit accumulation step for 2?min in ?0.4?V, this followed by an anodic potential scan between +0.2 and?+?0.6?V to obtain the voltammetric peak. The oxidation peak current is proportional to the concentration of silver ion in the range from 1.0?×?10^?8 to 1.0?×?10^?5?mol?L^?1, with a detection limit of 1.8?×?10^?9?mol?L^?1 after an accumulation time of 120?s. The relative standard deviation for 7 successive determinations of Ag(I) at 0.1???M concentration is 1.99%. The procedure was validated by determining Ag(I) in natural waters.

吸附转移溶出伏安法测定氟罗沙星注射液含量

氟罗沙星 (ｆｌｅｒｏｘａｃｉｎ ,ＦＬＲＸ)是一种抗菌谱广 ,杀菌力强的三氟喹诺酮类抗菌药[1] 。ＦＬＲＸ含量的测定方式主要有ＨＰＬＣ法[2 ,3] 、紫外分光光度法[3,4 ] 和荧光分光光度法[5] 。本文研究ＦＬＲＸ在不同支持电解质中的电化学行为 ,发现其在石墨电极表面有很强的吸附性 ,在一定的电位下富集几分钟 ,电极冲洗后在底液中扫描 ,仍有很大的峰电流。在此基础上建立了吸附转移溶出伏安法(ＡｄＴＳＶ) [6 ] 测定ＦＬＲＸ。方法的线性范围为 4～42 μｇ/ｍｌ,用于ＦＬＲＸ葡萄糖注射液中ＦＬＲＸ含量的测定 ,比其他方法灵敏、准确、…     

Anodic square-wave stripping voltammetric analysis of epinephrine using carbon fiber microelectrode

The behavior of epinephrine on a carbon fiber microelectrode (CFME) was studied with cyclic voltammetry and square-wave (SW) stripping voltammetry in order to find optimum conditions for its analysis using the CFME. An anodic stripping peak at about 0.20 V (vs. Ag/AgCl) was utilized. Under optimum conditions for anodic stripping (a pH value of 7.4, a deposition potential of − 0.5 V, a deposition time of 90 s, a final potential of 0.8 V, a SW frequency of 20 Hz, a step potential of 5 mV, and an amplitude of 45 mV), the calibration was linear in the concentration range of 0.0∼0.4 mg/L, and the detection limit was found to be 0.009 mg/L with a relative standard deviation 0.18% (n = 12) at 0.2 mg/L. The analytical performance of the CMFE, which is unmodified, is comparable to or better than other voltammetric results with various modified electrodes.     

Anodic stripping voltammetric determination of total lead, copper and selenium in whole blood and blood serum

A two-step procedure including appropriate wet-digestions, separation of selenium from interfering ions such as heavy metal ions with pentyl alcohol and anodic stripping voltammetric (ASV) determination of Pb²⁺, Cu²⁺ and SeO₃ ^2– is developed. The elements in digested whole blood and serum sample solutions were determined by using a standard addition method. 1 × 10^–9 mol/L SeO^2– ₃, Cu²⁺ and Pb²⁺ were successfully determined with relative standard deviations of approximately 1–2% (n = 6–8). Received: 19 August 1996 / Revised: 24 February 1997 / Accepted: 28 February 1997