Controlled release of volatiles under mild reaction conditions: from nature to everyday products

Volatile organic compounds serve in nature as semiochemicals for communication between species, and are often used as flavors and fragrances in our everyday life. The quite limited longevity of olfactive perception has led to the development of pro-perfumes or pro-fragrances--ideally nonvolatile and odorless fragrance precursors which release the active volatiles by bond cleavage. Only a limited amount of reaction conditions, such as hydrolysis, temperature changes, as well as the action of light, oxygen, enzymes, or microorganisms, can be used to liberate the many different chemical functionalities. This Review describes the controlled chemical release of fragrances and discusses additional challenges such as precursor stability during product storage as well as some aspects concerning toxicity and biodegradability. As the same systems can be applied in different areas of research, the scope of this Review covers fragrance delivery as well as the controlled release of volatiles in general.     

三明治式双极膜的制备及其光催化性能

以Cr3+交联羧甲基纤维素钠(CMC)作为阳膜层,戊二醛改性壳聚糖(CS)作为阴膜层,纳米TiO2光催化剂作为双极膜的中间层,在TiO2上涂布光敏剂八羟基喹啉（Oxine）以增强其光催化解离水的性能,制备了三明治式的双极膜（mCMC/TiO2-Oxine/mCS BPM)。 该双极膜在紫外光照射下,具有高的水解离效率,优良的亲水性能,双极膜阻抗小,工作电压低,当工作电流密度达0.12 A/cm2时,电槽工作电压小于5.0 V。     

咪草烟分子印迹聚合物的制备及其选择性吸附性能的研究

以丙烯酸为聚合单体,TMPTA为交联剂,AIBN为引发剂,咪草烟为模板分子,采用在低温光聚合的方法,制备了对咪草烟分子具有选择性识别能力的分子印迹聚合物．通过IR和HPLC表征,咪草烟分子印迹聚合物对咪草烟分子具有良好的识别作用．     

Macromolecular chemistry and medicine

Macromolecular substances are used in medicine both as materials and as reagents. In the former category polymers serve as replacements for soft tissue, as cardiovascular and orthopedic implants, and as adhesives. When employed as reagents, macromolecules interact with living tissue and play an active part in bodily repair processes.     

双氧水氧化环己烯催化合成己二酸研究进展

评述了近年来以环己烯为底物,双氧水为氧源,分别采用钨酸盐、钨酸、杂多酸及杂多酸盐、功能化分子筛和负载离子液体等为催化剂催化合成己二酸的研究进展.     

Chemical reaction and Soret effects on MHD convective flow of second grade fluid through an absorbent medium with ramped wall temperature as well as ramped surface concentration

In the present paper, the heat generating and/or absorption as well as thermo-diffusion on the unsteady free convection MHD gyrating flow of radiation and chemical reactive second grade fluid past an unbounded perpendicular plate during absorbent medium have been discussed. Here, it is assumed that, the confining plate has the ramped wall temperature with ramped surface concentration and isothermal temperature with ramped surface concentration. The analytical solutions for the governing equations are found by utilization of Laplace transformation methodology. The velocity, temperature and concentration profiles are analyzed with quite few figures. It is determined that, velocity, temperature and concentration distribution sketches in case of ramped temperature as well as ramped surface concentration are not as much of as those of isothermal temperature as well as ramped surface concentration. In addition to the idioms of skin friction, Nusselt number as well as Sherwood number are achieved and characterized numerically with tabular format.     

Enzyme-based biocatalysis for the treatment of organic pollutants and bioenergy production

Enzyme-based biocatalysis is emerging as an advanced technique to develop green processes that help to maintain the sustainability of the environment. The bioremediation of toxic organic pollutants and waste to bioenergy production using enzymes as biocatalysts is rapidly growing due to its eco-friendly and sustainable nature. Additionally, a range of microbial species that typically grow on organic wastes can be used to produce these enzymes in an efficient manner. This is seen as a potential strategy for the development of cost-effective manufacturing for a number of biotechnological applications. The present study discusses biocatalysis as a promising and sustainable method toward the bioremediation of hazardous organic pollutants as well as for bioenergy production, based on the immense potential of enzymes as biocatalysts. Emphasis has been placed on evaluating the critical elements that can enhance the production of enzymes used as biocatalysts, as well as their functional effectiveness and stability.     

Aptamers: molecular tools for analytical applications

Aptamers are artificial nucleic acid ligands, specifically generated against certain targets, such as amino acids, drugs, proteins or other molecules. In nature they exist as a nucleic acid based genetic regulatory element called a riboswitch. For generation of artificial ligands, they are isolated from combinatorial libraries of synthetic nucleic acid by exponential enrichment, via an in vitro iterative process of adsorption, recovery and reamplification known as systematic evolution of ligands by exponential enrichment (SELEX). Thanks to their unique characteristics and chemical structure, aptamers offer themselves as ideal candidates for use in analytical devices and techniques. Recent progress in the aptamer selection and incorporation of aptamers into molecular beacon structures will ensure the application of aptamers for functional and quantitative proteomics and high-throughput screening for drug discovery, as well as in various analytical applications. The properties of aptamers as well as recent developments in improved, time-efficient methods for their selection and stabilization are outlined. The use of these powerful molecular tools for analysis and the advantages they offer over existing affinity biocomponents are discussed. Finally the evolving use of aptamers in specific analytical applications such as chromatography, ELISA-type assays, biosensors and affinity PCR as well as current avenues of research and future perspectives conclude this review.     

Dithiocarbamates as Precursors in Organic Chemistry; Synthesis and Uses

Abstract

Organic dithiocarbamates have received great attention due to their interesting chemistry and wide utility as radical precursors and intermediates in organic synthesis. They also have found many of applications, that is, in agriculture and medicine. They are in use as pesticides, as well as in the rubber industries as vulcanization accelerators; and as antioxidants. Because they exhibit strong metal-binding capacity, they can act as in inhibitors of enzymes and have a profound effect on biological systems. Moreover, they have found application in the treatment of cancer and HIV.     

Analytical devices based on light-emitting diodes – a review of the state-of-the-art

A general overview of the development of the uses of light-emitting diodes in analytical instrumentation is given. Fundamental aspects of light-emitting diodes, as far as relevant for this usage, are covered in the first part. The measurement of light intensity is also discussed, as this is an essential part of any device based on light-emitting diodes as well. In the second part, applications are discussed, which cover liquid and gas-phase absorbance measurements, flow-through detectors for chromatography and capillary electrophoresis, sensors, as well as some less often reported methods such as photoacoustic spectroscopy.     

Low-field NMR for quality control on oils

Oil is a prominent, but multifaceted material class with a wide variety of applications. Technical oils, crude oils as well as edibles are main subclasses. In this review, the question is addressed how low-field NMR can contribute in oil characterization as an analytical tool, mainly with respect to quality control. Prerequisite in the development of a quality control application, however, is a detailed understanding of the oils and of the measurement. Low-field NMR is known as a rich methodical toolbox that was and is explored and further developed to address questions about oils, their quality, and usability as raw materials, during production and formulation as well as in use.     

Nanocelluloses: a new family of nature-based materials

Cellulose fibrils with widths in the nanometer range are nature-based materials with unique and potentially useful features. Most importantly, these novel nanocelluloses open up the strongly expanding fields of sustainable materials and nanocomposites, as well as medical and life-science devices, to the natural polymer cellulose. The nanodimensions of the structural elements result in a high surface area and hence the powerful interaction of these celluloses with surrounding species, such as water, organic and polymeric compounds, nanoparticles, and living cells. This Review assembles the current knowledge on the isolation of microfibrillated cellulose from wood and its application in nanocomposites; the preparation of nanocrystalline cellulose and its use as a reinforcing agent; and the biofabrication of bacterial nanocellulose, as well as its evaluation as a biomaterial for medical implants.     

香豆素-3-羧酸分子印迹聚合物复合膜对底物的结合及渗透选择性质的研究

在光照和引发剂的作用下, 模板分子香豆素-3-羧酸、 功能单体丙烯酰胺和交联剂乙二醇二甲基丙烯酸酯(EDMA)或三甲氧基丙烷三甲基丙烯酸(TRIM)在聚偏氟乙烯(PVDF)微孔滤膜表面聚合形成分子印迹聚合物复合膜. 用高效液相色谱仪测定了分别以TRIM和EDMA为交联剂制备的分子印迹聚合物膜在不同溶剂中对混合底物的结合和渗透选择性. 结果表明, 以TRIM为交联剂的印迹膜对模板分子具有更高的结合和渗透选择性. 另外, 以乙腈或乙腈/水作为溶剂对分子印迹膜所作的实验和讨论有助于为从复杂样品中分离模板分子奠定理论和实验基础.     

Asymmetric multicomponent reactions (AMCRs): the new frontier

Asymmetric multicomponent reactions involve the preparation of chiral compounds by the reaction of three or more reagents added simultaneously. This kind of addition and reaction has some advantages over classic divergent reaction strategies, such as lower costs, time, and energy, as well as environmentally friendlier aspects. All these advantages, together with the high level of stereoselectivity attained in some of these reactions, will force chemists in industry as in academia to adopt this new strategy of synthesis, or at least to consider it as a viable option. The positive aspects as well as the drawbacks of this strategy are discussed in this Review.     

3D Graphene Foam by Chemical Vapor Deposition: Synthesis,Properties, and Energy-Related Applications

In this review, we highlight recent advancements in 3D graphene foam synthesis by template-assisted chemical vapor deposition, as well as their potential energy storage and conversion applications. This method offers good control of the number of graphene layers and porosity, as well as continuous connection of the graphene sheets. The review covers all the substrate types, catalysts, and precursors used to synthesize 3D graphene by the CVD method, as well as their most viable energy-related applications.     

Aluminosilicate and aluminosilicate based polymer composites: Present status,applications and future trends

Aluminosilicates have traditionally been important materials for applications related to adsorbents, water softeners, catalysis and mechanical and thermal reinforcement due to their high surface area, excellent thermal/hydrothermal stability, high shape-selectivity and superior ion-exchange ability. Recently, their use as polymer fillers has allowed to increasingly extending their application range to innovative areas such as medical and biological fields as well as in sensors, filtration membranes, energy storage and novel catalysis routes. Further, the large versatility and tailoring possibilities of both filler and matrix indicates this area as one of the enabling key technologies of the near future.This work summarizes the main developments up to date in this increasingly interesting field, focuses on the main applications already developed as well as on the key challenges for the near future.     

新型全息用光致聚合物的研究

研制了一种新型全息用光致聚合物材料,其成膜树脂为胺固化环氧体系,全息记录组分为光引发自由基聚合体系.用新合成的高效光敏染料DEAMC做光敏剂,通过配方调整,制备了一系列的样片,以457 nm的蓝光为记录光,632.8 nm的红光为探针光,研究了样片的衍射效率、灵敏度、折射率调制度等全息性能.结果表明,通过调整材料的配方组成、各组分的含量及样片的膜厚等因素,可以优化样片的全息性能.对样片的信噪比损失(LSNR)测试结果表明,在全息存储的曝光量范围内对样片曝光引起的图像信噪比损失仅有0.40 dB,说明样片的光学质量高,在全息存储上将具有很好的应用前景.     

Combining enabling techniques in organic synthesis: continuous flow processes with heterogenized catalysts

The concepts article describes enabling techniques (solid-phase assisted synthesis, new reactor design, microwave irradiation and new solvents) in organic chemistry and emphasizes the combination of several of them for creating new synthetic technology platforms. Particular focus is put on the combination of immobilized catalysts as well as biocatalysts with continuous flow processes. In this context, the PASSflow continuous flow technique fulfils both chemical as well as chemical engineering requirements. It combines reactor design with optimized, monolithic solid phases as well as reversible immobilization techniques for performing small as well as large scale synthesis with heterogenized catalysts under continuous flow conditions.