Chiral Recognition of Tryptophan Enantiomers Based on β‐Cyclodextrin‐platinum Nanoparticles/Graphene Nanohybrids Modified Electrode

The nanohybrids which based on β‐cyclodextrin, platinum nanoparticles and graphene (β‐CD‐PtNPs/GNs) were successfully synthesized and characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), fourier transform infrared spectroscopy (FT‐IR) and electrochemical impedance spectroscopy (EIS). Then they were used to construct a simple and reliable chiral sensing platform to interact with tryptophan (Trp) enantiomers. Differential pulse voltammetry (DPV) was used to investigate the stereo selectivity of β‐CD‐PtNPs/GNs to Trp enantiomers. After interaction, the obvious difference of peak currents of L‐Trp and D‐Trp was obtained, indicating this strategy could be employed to chiral recognition of Trp enantiomers. Under the optimum conditions, the chiral sensor exhibited a good linear response to Trp enantiomers in a linear range of 5.0×10^?5 to 5.0×10^?3 M with a low limit of detection of 1.7×10^?5 M (S/N=3). This approach provided a new available platform to recognize and determine Trp enantiomers.     

Electrochemical Synthesis of β‐Cyclodextrin Functionalized Silver Nanoparticles and Reduced Graphene Oxide Composite for the Determination of Hydrazine

β‐cyclodextrin (β‐CD) functionalized silver nanoparticles (AgNPs) and reduced graphene oxide (RGO) via one step electrochemical potentiodyanamic method has been prepared. Scanning electron microscopy, Energy‐Dispersive X‐ray spectroscopy, electrochemical impedance spectroscopy and cyclic voltammetry were used to study the role of β‐CD on preparation of AgNPs and RGO. RGO/β‐CD/AgNPs modified GCE showed good electrochemical activity towards electro‐oxidation of hydrazine in terms of decreasing the over potential and increasing the peak current. The kinetic parameters such as electron transfer coefficient (α) and diffusion coefficient (Do) of the modified electrode towards hydrazine were determined to be 0.66 and 0.97×10^?6 cm² s^?1, respectively. The LOD of our sensor was many folds lower than that of recommended concentration of hydrazine in drinking water by United States Environmental Protection Agency and World Health Organization. The sensor exhibited a wide linear range from 0.08 to 1110 µM and a very low detection limit (LOD) of 1.4 nM. In addition, the sensor selectively determined hydrazine even in the presence of common interferents.     

Highly Efficient,Green, and Scalable β‐Cyclodextrin‐Assisted Aqueous Exfoliation of Transition‐Metal Dichalcogenides: MoS2 and ReS2 Nanoflakes

The β‐cyclodextrin‐assisted aqueous‐exfoliation method was used to prepare transition‐metal dichalcogenide (TMD) nanosheets, in a cheap, highly efficient, scalable and environmentally friendly manner. As study cases, MoS₂ and ReS₂ nanoflakes were prepared according to this method. Particularly, the effective exfoliation of ReS₂ crystals in an aqueous environment was observed for the first time. Moreover, exfoliated nanomaterials can be readily utilized in hydrogen evolution reactions (HERs) as noble‐metal‐free catalysts. This work provides new opportunities for highly efficient exfoliation of TMDs and other 2D nanomaterials into few‐layer nanosheets in aqueous media. Their production process showed high biocompatibility, broad applicability and excellent sustainability.     

β‐Cyclodextrin‐modified three‐dimensional graphene oxide‐wrapped melamine foam for the solid‐phase extraction of flavonoids

A new three‐dimensional graphene oxide‐wrapped melamine foam was prepared and used as a solid‐phase extraction substrate. β‐Cyclodextrin was fabricated onto the surface of three‐dimensional graphene oxide‐wrapped melamine foam by a chemical covalent interaction. In view of a specific surface area and a large delocalized π electron system of graphene oxide, in combination with a hydrophobic interior cavity and a hydrophilic peripheral face of β‐cyclodextrin, the prepared extraction material was proposed for the determination of flavonoids. In order to demonstrate the extraction properties of the as‐prepared material, the adsorption energies were theoretically calculated based on periodic density functional theory. Static‐state and dynamic‐state binding experiments were also investigated, which revealed the monolayer coverage of flavonoids onto the β‐cyclodextrin/graphene oxide‐wrapped melamine foams through the chemical adsorption. ¹H NMR spectroscopy indicated the formation of flavonoids–β‐cyclodextrin inclusion complexes. Under the optimum conditions, the proposed method exhibited acceptable linear ranges (2–200 μg/L for rutin and quercetin‐3‐O‐rhamnoside; 5–200 μg/L for quercetin) with correlation coefficients ranging from 0.9979 to 0.9994. The batch‐to‐batch reproducibility (n = 5) was 3.5–6.8%. Finally, the as‐established method was satisfactorily applied for the determination of flavonoids in Lycium barbarum (Goji) samples with relative recoveries in the range of 77.9–102.6%.     

Novel Multifunctional Graphene Sheets with Encased Au/Ag Nanoparticles for Advanced Electrochemical Analysis of Organic Compounds

This work is the first presentation of the synthesis of few‐layer graphene decorated with gold and silver nanoparticles (Gr–Au–Ag) by chemical vapor deposition over a catalytic system formed of bimetallic Au–Ag nanoclusters supported on MgO and with methane used as the source of carbon. The sheetlike morphology of the graphene nanostructures, with mean sizes in the range of hundreds of nanometers, was observed by high‐resolution electron microscopy. The distinctive feature found in all the samples was the regular rectangular or square shapes. This multi‐component organic–inorganic nanomaterial was used to modify a platinum substrate and subsequently employed for the detection of carbamazepine, an anti‐convulsion drug. UV/Vis spectroscopy revealed that a strong hypochromism occurred over time, after mixing solutions of graphene–Au–Ag with carbamazepine. This can be attributed to π–π stacking between the aromatic groups of the two compounds. Linear sweep voltammetry (LCV) provided evidence that the modified platinum substrate presented a significant electrocatalytic reaction toward the oxidation of carbamazepine. The intensity of the current was found to increase by up to 2.5 times, and the oxidation potential shifted from +1.5 to +1.35 V(Ag/AgCl) in comparison with the unmodified electrode. Electrochemical impedance spectroscopy (EIS) was further used to thoroughly assess the activity of the platinum electrode that was modified by the deposition of the Gr‐Au‐Ag composites in the presence of various concentrations of carbamazepine. The experimental EIS records were used for the generation of an equivalent electrical circuit, based on the charge‐transfer resistance (R_ct), Warburg impedance (Z_D), solution resistance (R_s), and a constant phase element (CPE) that characterizes the non‐ideal interface capacitive responses.     

Graphene oxide based molecularly imprinted polymers modified with β‐cyclodextrin for selective extraction of di(2‐ethylhexyl) phthalate in environmental waters

Graphene oxide based molecularly imprinted polymers modified with β‐cyclodextrin were prepared as solid‐phase extraction column sorbents for specific recognition and sensitive detection of di(2‐ethylhexyl) phthalate in water samples. The morphology and composition of synthesized sorbents were characterized by scanning electron microscopy, thermo‐gravimetric analysis, Raman spectroscopy, and Fourier‐transform infrared spectroscopy. The conditions affecting the performance of extraction procedures such as desorption solvent types and volume, sample pH and volume were investigated. The loading capacity (8.2 μg/mg) of the prepared sorbents increased eight times after modification with β‐cyclodextrin. The developed extraction procedures coupled to high‐performance liquid chromatography exhibited good linearity (0.2–500 μg/L), low limit of detection (0.052 μg/L), and good precision (relative standard deviation?5.7%) under optimized conditions. The developed solid‐phase extraction technique with prepared sorbents has been successfully applied in extracting trace di(2‐ethylhexyl) phthalate from real natural waters with high efficiency, good selectivity, and desirable recoveries.     

Tapioca Biofilm Containing Nitrogen‐doped Titanium Dioxide Nanoparticles for Electrochemical Detection of 17‐β Estradiol

A novel sensor architecture based on thin film of tapioca decorated within nitrogen‐doped titanium dioxide (N‐TiO₂) nanoparticles is reported. The nanostructures were characterized by scanning electron microscope, transmission electron microscope, X‐rays diffraction and voltammetric techniques. The proposed electrode was used for detection of low concentrations of 17‐β estradiol in without purification step, which was investigated by using linear sweep adsorptive stripping voltammetry. Under optimal conditions, the analytical curve was linear over a 17β‐estradiol concentration range of 9.9×10⁻⁶ to 1.4×10⁻⁵ mol L⁻¹, with a detection limit of 1.7×10⁻⁷ mol L⁻¹. The tapioca and N‐TiO₂ nanoparticles homogeneous film was applied for detection of 17‐β‐estradiol in tap water and synthetic urine samples, which presented satisfactory results.     

Functionalization of Reduced Graphene Oxide with β‐cyclodextrin Modified Palladium Nanoparticles for the Detection of Hydrazine in Environmental Water Samples

A sensitive and selective hydrazine sensor was developed by β‐cyclodextrin modified palladium nanoparticles decorated reduced graphene oxide (PdNPs‐β‐CD/rGO) nanocomposite. The PdNPs‐β‐CD/rGO hybrid material was prepared by simple electrochemical method. The hydrophobic cavity of β‐CD ineracts with palladium nanoparticles by hydrophobic interaction and further it is uniformly assembled on the rGO surface through hydrogen bond formation, which is clearly confirmed by FT‐IR, FESEM and TEM. The high electrocatalytic activity of hydrazine oxidation was observed at −0.05 V (vs. Ag/AgCl) on PdNPs‐β‐CD/rGO modified electrode; due to the excellent stabilization, high catalytic activity and large surface area of the PdNPs‐β‐CD/rGO composite. The PdNPs‐β‐CD/rGO fabricated hydrazine sensor exhibited an excellent analytical performance, including high sensitivity (1.95 μA μM⁻¹ cm⁻²), lower detection limit (28 nM) and a wide linear range (0.05 to 1600 μM). We also demonstrated that the PdNPs‐β‐CD/rGO nanocomposite modified electrode is a highly selective and sensitive sensor towards detection of hydrazine among the various interfering species. Hence, the proposed hydrazine sensor is able to determine hydrazine in different water samples.     

Supramolecular Assembly of β‐Cyclodextrin‐Capped Gold Nanoparticles on Ferrocene‐Functionalized ITO Surface for Enhanced Voltammetric Analysis of Ascorbic Acid

A supramolecular recognition functionalized electrode (βCD‐nanoAu/Fc‐ITO) which exhibits redox‐activity was prepared through supramolecular assembly of β‐cyclodextrin (βCD) capped gold nanoparticles (βCD‐nanoAu) on the ITO previously coated with a monolayer of ferrocene residues (Fc‐ITO). The immobilization of βCD‐nanoAu on Fc‐ITO was confirmed by atomic force microscopy (AFM), and the supramolecular nature of the immobilization approach was also confirmed by cyclic voltammetry. On the other hand, the electrocatalytic activity of βCD‐nanoAu/Fc‐ITO electrode was also studied. The electrocatalytic activity toward ascorbic acid (AA) was enhanced compared with that at the Fc‐ITO electrode, and a linear relationship existed between the anodic peak and the concentration of AA in the range of 5.3×10^?5 to 3.0×10^?3 M with a detection limit (S/N=3) of 4.1×10^?6 M.     

布洛芬在石墨烯/DNA/纳米金修饰电极上的电化学行为及测定

利用石墨烯/DNA/纳米金(Gr/DNA/GNPs)修饰电极对布洛芬(IB)的电化学行为进行了研究。分别采用紫外-可见分光光度法和扫描电镜成像技术对Gr/DNA/GNPs复合材料进行了表征。比较了不同修饰电极的检测效果并考察了缓冲体系及修饰量等对测定的影响。实验结果表明,IB在Gr/DNA/GNPs复合材料修饰电极上的电化学信号较为明显,在0.1 mol·L-1PBS缓冲溶液(pH 6.8)中,IB于0.83 V处可观察到1个灵敏的氧化峰。在最佳实验条件下对IB进行检测,其线性范围为7.2×10-7~4.9×10-5mol·L-1,检出限为1.5×10-7mol·L-1。干扰实验和重复实验的结果表明,该修饰电极选择性及重现性良好。用于实际样品的检测,结果满意。     

Platinum Oxide Nanoparticles for Electrochemical Hydrogen Evolution: Influence of Platinum Valence State

Electrochemical hydrogen generation is a rising prospect for future renewable energy storage and conversion. Platinum remains a leading choice of catalyst, but because of its high cost and low natural abundance, it is critical to optimize its use. In the present study, platinum oxide nanoparticles of approximately 2 nm in diameter are deposited on carbon nitride (C3N4) nanosheets by thermal refluxing of C3N4 and PtCl₂ or PtCl₄ in water. These nanoparticles exhibit apparent electrocatalytic activity toward the hydrogen evolution reaction (HER) in acid. Interestingly, the HER activity increases with increasing Pt⁴⁺ concentration in the nanoparticles, and the optimized catalyst even outperforms commercial Pt/C, exhibiting an overpotential of only −7.7 mV to reach the current density of 10 mA cm⁻² and a Tafel slope of −26.3 mV dec⁻¹. The results from this study suggest that the future design of platinum oxide catalysts should strive to maximize the Pt⁴⁺ sites and minimize the formation of the less active Pt²⁺ species.     

Surface‐Enhanced Raman Scattering Based on Controllable‐Layer Graphene Shells Directly Synthesized on Cu Nanoparticles for Molecular Detection

Graphene shells with a controllable number of layers were directly synthesized on Cu nanoparticles (CuNPs) by chemical vapor deposition (CVD) to fabricate a graphene‐encapsulated CuNPs (G/CuNPs) hybrid system for surface‐enhanced Raman scattering (SERS). The enhanced Raman spectra of adenosine and rhodamine 6G (R6G) showed that the G/CuNPs hybrid system can strongly suppress background fluorescence and increase signal‐to‐noise ratio. In four different types of SERS systems, the G/CuNPs hybrid system exhibits more efficient SERS than a transferred graphene/CuNPs hybrid system and pure CuNPs and graphene substrates. The minimum detectable concentrations of adenosine and R6G by the G/CuNPs hybrid system can be as low as 10^?8 and 10^?10 M , respectively. The excellent linear relationship between Raman intensity and analyte concentration can be used for molecular detection. The graphene shell can also effectively prevent surface oxidation of Cu nanoparticles after exposure to ambient air and thus endow the hybrid system with a long lifetime. This work provides a basis for the fabrication of novel SERS substrates.     

Assembly of SnSe Nanoparticles Confined in Graphene for Enhanced Sodium‐Ion Storage Performance

Sodium‐ion batteries (SIBs) have attracted much interest as a low‐cost and environmentally benign energy storage system, but more attention is justifiably required to address the major technical issues relating to the anode materials to deliver high reversible capacity, superior rate capability, and stable cyclability. A SnSe/reduced graphene oxide (RGO) nanocomposite has been prepared by a facile ball‐milling method, and its structural, morphological, and electrochemical properties have been characterized and compared with those of the bare SnSe material. Although the redox behavior of SnSe remains nearly unchanged upon the incorporation of RGO, its electrochemical performance is significantly enhanced, as reflected by a high specific capacity of 590 mA h g^?1 at 0.050 A g^?1, a rate capability of 260 mA h g^?1 at 10 A g^?1, and long‐term stability over 120 cycles. This improvement may be attributed to the high electronic conductivity of RGO, which also serves as a matrix to buffer changes in volume and maintain the mechanical integrity of the electrode during (de)sodiation processes. In view of its excellent Na⁺ storage performance, this SnSe/RGO nanocomposite has potential as an anode material for SIBs.     

Paclitaxel‐Loaded β‐Cyclodextrin‐Modified Poly(Acrylic Acid) Nanoparticles through Multivalent Inclusion for Anticancer Therapy

A nanoassembled drug delivery system for anticancer treatment, formed by the host–guest interactions between paclitaxel (PTX) and β‐cyclodextrin (β‐CD) modified poly(acrylic acid) (PCDAA), is successfully prepared. After such design, the aqueous solubility of PTX is greatly increased from 0.34 to 36.02 μg mL^?1, and the obtained PCDAA‐PTX nanoparticles (PCDAA‐PTX NPs) exhibit a sustained PTX release behavior in vitro. In vitro cytotoxicity finds that PCDAA‐PTX NPs can accumulate significantly in tumor cells and remain the pharmacological activity of PTX. The in vivo real‐time biodistribution of PCDAA‐PTX NPs is investigated using near‐infrared fluorescence imaging, indicating that the PCDAA‐PTX NPs can effectively target to the tumor site by the enhanced permeability and retention effect in H22 tumor‐bearing mice. Through in vivo antitumor examination, PCDAA‐PTX NPs exhibit superior efficacy in impeding the tumor growth compared to the commercially available Taxol®.

     

Simultaneous Determination of Nitrophenol Isomers Based on β‐Cyclodextrin Functionalized Reduced Graphene Oxide

β‐CD modified reduced graphene oxide (RGO) sheets have been prepared and characterized by TEM, AFM, IR, EIS and CVs. In comparison with bare glass carbon electrode (GCE) and RGO modified GCE, CD‐RGO/GCE showed much higher peak currents to the reduction of nitrophenol isomers (NPs), attributed to the larger specific surface area of RGO and high quantities of host–guest recognition sites. Three pairs of redox peaks are observed on the CVs of CD‐RGO for p‐NP (0.3 V), o‐NP (?0.2 V) and m‐NP (0.05 V), separating well with each other. Under the optimized condition, the anodic peak currents were linear over ranges around 1–10 mg dm^?3 for p‐NP, 1–9 mg dm^?3 for o‐NP and 1–6 mg dm^?3 for m‐NP, with the detection limits of 0.05 mg dm^?3, 0.02 mg dm^?3 and 0.1 mg dm^?3, respectively. Thus, the CD‐RGO is expected to be a promising sensor material for detecting trace NPs in waste water.     

Applying Mechanochemistry for Bottom‐Up Synthesis and Host–Guest Surface Modification of Semiconducting Nanocrystals: A Case of Water‐Soluble β‐Cyclodextrin‐Coated Zinc Oxide

Mechanochemistry has recently emerged as an environmentally friendly solventless synthesis method enabling a variety of transformations including those impracticable in solution. However, its application in the synthesis of well‐defined nanomaterials remains very limited. Here, we report a new bottom‐up mechanochemical strategy to rapid mild‐conditions synthesis of organic ligand‐coated ZnO nanocrystals (NCs) and their further host–guest modification with β‐cyclodextrin (β‐CD) leading to water‐soluble amide‐β‐CD‐coated ZnO NCs. The transformations can be achieved by either one‐pot sequential or one‐step three‐component process. The developed bottom‐up methodology is based on employing oxo‐zinc benzamidate, [Zn₄(μ₄‐O)(NHOCPh)₆], as a predesigned molecular precursor undergoing mild solid‐state transformation to ZnO NCs in the presence of water in a rapid, clean and sustainable process.     

Synthesis of α‐Cyclodextrin‐Conjugated Poly(ε‐lysine)s and Their Inclusion Complexation Behavior

Novel functional polymers utilizing specific host/guest interactions were designed by introducing α‐CD host molecules into poly(ε‐lysine) chains as side groups. An interesting phase separation was observed as a result of the inclusion complexation between the polymeric host and 3‐(trimethylsilyl)propionic acid as a model guest in aqueous media. This water‐soluble polymeric host would be useful for various applications, particularly drug delivery, due to its biodegradability, low toxicity, and unique functionality represented as a complexation‐induced phase separation.