Electron-transfer polymers. XXX. Preparation of poly(1-vinyl-3,4,6-trimethyl-2,5-benzoquinone)

1-Vinyl-3,4,6-trimethyl-2-methoxy-5-hydroxy-benzene (I) was prepared in good yield by the Wittig reaction from the corresponding chloromethyl compound. It could be polymerized cationically to low molecular weight material. The polymer could be oxidized to poly(1-vinyl-3,4,6-trimethyl-2,5-benzoquinone) (III) and could be reduced to the corresponding hydroquinone. Compound (I) was acetylated at the phenolic hydroxyl group and polymerized. The acetyl group was quantitatively reduced with lithium aluminum hydride, and the resulting polymer could be oxidized quantitatively to (III). Its molecular weight was a little higher than that prepared directly from (I).     

染料结合2μm无孔硅胶亲和填料的制备与应用

在２μｍ无孔硅胶表面键合３ 氨丙基 三乙氧基硅烷（ＡＰＳ）,并与三嗪染料活性蓝Ｆ３ＧＡ（ＣｉｂａｃｒｏｎＢｌｕｅＦ３ＧＡ,ＣＢ）反应,制得亲和色谱填料,并采用扫描电镜、元素分析、ｐＨ稳定性测试对此填料进行鉴定与表征。该填料具有良好的色谱性能,且对生物大分子有一定的亲和选择性,改变ｐＨ值及离子强度对溶菌酶的结合量有明显影响,可用于分离卵清蛋白（Ｏｖａｌ）和溶菌酶（Ｌｙｓ）,且对α ,β ,γ 球蛋白有不同的亲和作用,并可从鸡蛋清中制备少量溶菌酶。     

An on-line galvanic cell-generated electrochemiluminescence and flow injection determination of calcium in milk and vegetables.

An on-line Ag/Al galvanic cell was studied and employed to generate electrochemiluminescence (ECL) of calcein blue. The potential of the galvanic cell could be adjusted by varying the components of flow reagent or by using different metals to substitute for Ag or Al. The reported cell exhibited perfect capability of supplying a stable potential for ECL generation. Because the weak ECL of calcein blue could be greatly sensitized in the presence of calcium in alkaline solution, calcium contents in milk and vegetable samples were assayed; the results were validated with ICP-AES method. The method gave linear results in 1.0 x 10(-4) mol L(-1) to 8.0 x 10(-6) mol L(-1) calcium concentration range and the 3(sigma)limit of detection was to be 2.0 x 10(-6) mol L(-1). Experiment results imply that this model of ECL detection could be applied for instrument miniaturization with easy fabrication.     

Reagentless chemiluminescence flow sensor for the determination of riboflavin in pharmaceutical preparations and human urine

A novel continuous-flow sensor based on chemiluminescence (CL) detection was developed for the determination of riboflavin at pg ml(-1) levels by the immobilization of the reagents. It was found that the CL intensity from the oxidation between luminol and periodate could be enhanced in the presence of riboflavin. The increase of CL emission was correlated with the riboflavin concentration in the range from 0.04 to 200 ng ml(-1), and the detection limit was 0.02 ng ml(-1) (3s). Considering the effective reaction ions, luminol and IO4- was immobilized on anion-exchange resin. The system could produce an evident CL signal by water as eluant and it was also shown that the flow sensor could greatly improve the selectivity and sensitivity for determination of riboflavin with a high signal-to-noise ratio. A complete analysis, including sampling and washing, could be performed in 0.5 min with a relative standard deviation of less than 3.0%. The flow sensor was applied successfully to the determination of riboflavin in pharmaceutical preparations and human urine samples.     

Synthesis of chitosan resin possessing a phenylarsonic acid moiety for collection/concentration of uranium and its determination by ICP-AES

A chitosan resin possessing a phenylarsonic acid moiety (phenylarsonic acid type chitosan resin) was developed for the collection and concentration of trace uranium prior to inductively coupled plasma (ICP) atomic emission spectrometry (AES) measurement. The adsorption behavior of 52 elements was systematically examined by packing it in a minicolumn and measuring the elements in the effluent by ICP mass spectrometry. The resin could adsorb several cationic species by a chelating mechanism, and several oxo acids, such as Ti(IV), V(V), Mo(VI), and W(VI), by an anion-exchange mechanism and/or a chelating mechanism. Especially, U(VI) could be adsorbed almost 100% over a wide pH region from pH 4 to 8. Uranium adsorbed was easily eluted with 1 M nitric acid (10 mL), and the 25-fold preconcentration of uranium was achieved by using a proposed column procedure, which could be applied to the determination of trace uranium in seawater by ICP-AES. The limit of detection was 0.1 ng mL⁻¹ for measurement by ICP-AES coupled with 25-fold column preconcentration.     

Chemistry of allenic/propargylic anions generated by base treatment of sulfonylallenes: synthesis of 1-alkynyl-1-sulfonylcycloalkanes and cycloalkanols

The intramolecular trapping of allenyl/propargyl anions, generated from sulfonylallenes with the proper base, by a haloalkyl group or an aldehyde functionality was investigated. The treatment of 1-(ω-iodoalkyl)-1-(phenylsulfonyl)allenes with TBAF or NaH in DMF efficiently produced the 1-alkynyl-1-(phenylsulfonyl)-substituted three- to seven-membered carbocycles. The allenyl/propargyl anions could also be intramolecularly trapped using a terminal aldehyde to stereoselectively afford the 2-alkynyl-2-(phenylsulfonyl)-substituted five- and six-membered cycloalkanols. The latter reaction could be performed using a catalytic amount of TBAF or DBU.     

聚乙烯醇/聚乙烯基吡咯烷酮共混体系的结晶行为

用DSC、WAXD和SAXS研究了聚乙烯醇(PVAl)/聚乙烯基吡咯烷酮(PVP)共混体系的结晶行为.PVAl的结晶度随PVP含量增加而减少,并存在结晶度为零的组成(PVAl)的重量分数约为50％.与纯PVAl相比,共混物的温度区间T_m-T_g减小,表明PVP对PVAl的结晶起抑制作用.共混物中PVAl的结晶速度下降,具体表现为PVAl过冷区随PVP含量增加而扩大,动力学速度常数减小,球晶增长速度下降.纯PVAl和共混体系的等温结晶速率均遵循Avrami方程.退火样品的长周期、片晶厚度和过渡层厚度大于相同组成未退火样品.两者长周期随PVP含量增长加显著增大,片晶厚度增长次之,过渡层厚度变化不大.     

分子光谱法研究新型抗肿瘤前药双(β-二酮)Ti(Ⅳ)与DNA相互作用

在生理酸度(pH=7.4)下,采用紫外及荧光等分子光谱法研究了自制的双(β-二酮)Ti(Ⅳ)新型抗肿瘤前药与DNA之间的相互作用,考察了前药和溴化乙锭与鱼精DNA结合的竞争性.研究结果表明:DNA通过静态猝灭作用机制猝灭前药的荧光,并测得其在298K和308K时的猝灭常数(Kq)分别为8.590 3×1011和7.192 2×1011 L·mol-1·s-1,结合常数(Kd)分别为5.583 9×104和4.798 1×104 L·mol-1,结合位点数(n)为1.16和0.97;DNA的存在使前药的紫外吸收光谱发生减色效应且吸收波长产生红移;前药分子可插入DNA中置换出于DNA结合的溴化乙锭.这些结果说明前药分子以嵌插方式与DNA进行结合.     

New fluorimetric determination of hemoglobin used as a substitute of mimietic peroxidase

Hemoglobin (Hb) could be used as a substitute of peroxidase in the catalytic oxidation of tetra-substituted amino aluminum phthalocyanine (TAA1Pc) by H2O2. We found that the fluorescence of TAA1Pc (a red-region fluorescent dye with a maximum excitation wavelength at 606 nm and a maximum emission wavelength at 673 nm) could significantly be quenched by H2O2 in the presence of Hb. The value of F0/F (where the relative fluorescence intensity of blank solution and that of the sample solution containing Hb were given by F0 and F, respectively) is linearly related to the concentration of Hb. Based on this, a novel fluorimetric method was developed for the determination of Hb in aqueous solution. Under optimal conditions, Hb could be determined in the concentration range of 5 x 10(-11) - 12 x 10(-8) mol L(-1) with a detection limit of 1.5 x10(-11) mol L(-1). The relative standard deviation of ten replicate measurements was 1.95% for solution containing 1 x10(-9 ) mol L(-1) Hb. The proposed method has been applied to the analysis of Hb in human blood and the results were in good agreement with those reported by a hospital laboratory. So this is a new, high sensitive and precise fluorescence quenching method to determine Hb.     

Transport behavior and efflux of Rg1 in rat pulmonary epithelial cells

The aim of this study was to investigate whether ginsenoside Rg1 could be transported into rat pulmonary epithelial cells and its transport behavior and efflux through the cells. A high-performance liquid chromatography coupled with 2487 UV-vis detector at 203 nm was applied. The mobile phase was 0.05% phosphate-acetonitrile (75:25, v/v). Cells were incubated with Rg1 (100 microg/mL) for a specific time, then lysed and sonicated in methanol to extract intracellular Rg1. Cells incubated with Rg1 and verapamil or KCN were processed by the same method. A 20 microL aliquot of sample was injected into the HPLC system to determine Rg1 concentration. The results showed that Rg1 could be transported into the epithelial cells with peak concentration of 1.28 microg/10(5) cells at 0.5 h. Metabolic inhibitor KCN and P-glycoprotein inhibitor verapamil could increase Rg1 concentration within the cells, indicating that efflux of Rg1 was energy-dependent and P-gp was likely to be involved. This is the first time that the transport behavior and efflux of Rg1 through rat pulmonary epithelial cells has been demonstrated. The phenomenon that Rg1 concentration in the cells decreased whereas that in the medium remained high indicated that a more effective means of drug administration should be found.     

稀土催化制备窄分子量分布高顺式聚异戊二烯及聚合反应动力学

由稀土羧酸钕盐(Nd)、三异丁基铝(Al)、含氯活化剂(CE)及醇(OH)组成的均相稀土羧酸盐催化体系,用于异戊二烯(Ip)定向聚合,其中含氯活化剂(CE)为氯代烃(CE1)或氯代羧酸酯(CE2).研究了CE和OH的化学结构及Al用量对Ip聚合及聚异戊二烯(PIp)微观结构、分子量及分子量分布的影响,将原位全反射傅立叶红外光谱(in situ ATR-FTIR)技术应用于研究稀土催化Ip配位聚合反应过程及聚合反应动力学,采用FTIR、GPC、NMR及DSC等测试手段表征PIp的微观结构、分子量及其分布、序列分布及热性能.实验结果表明,在稀土催化异戊二烯聚合反应中,少量的CE2和OH有助于提高催化活性、降低分子量分布和提高顺式含量.聚合速率对单体浓度呈现一级动力学关系,表观增长活化能(Ea)为69.5 kJ/mol.通过调节催化剂组分配比及聚合工艺条件,可制备出顺-1,4结构含量可达98%以上、窄分子量分布(Mw/Mn=1.6～2.4)的高顺式聚异戊二烯.     

新型可用于荧光标记的α-氰基丙烯酸酯单体的合成及在小鼠活体成像中的应用

设计合成了新型含有荧光基团的α-氰基丙烯酸酯单体,并与其它α-氰基丙烯酸酯单体共聚,得到产生荧光的聚氰基丙烯酸酯材料.将其包埋在小鼠背部肌肉层,可获得良好的荧光成像效果.通过对荧光强度的监测,初步研究了聚氰基丙烯酸酯材料中的侧链酯基在小鼠体内的降解情况.单体合成是以蒽合氰基丙烯酸和4,4'-二甲氧基三苯基-氨基己醇为原料,得到蒽合氰基丙烯酸(4,4'-二甲氧基三苯基-氨基己醇)酯,脱保护后再将异硫氰酸荧光素以化学键合的方式标记在末端氨基上,脱蒽还原烯双键后,得到可用于荧光标记的α-氰基丙烯酸(异硫氰酸荧光素-氨基己醇)酯单体.反应中间体及单体结构采用核磁共振氢谱和质谱进行表征.该单体及其高聚物均可在激发光(488 nm)和发射光(525 nm)条件下观察到明显荧光.     

Coulometric determination of microamounts of hydrogen in metal

Hydrogen in metal was extracted into a carrier gas (argon) by heating at about 1100 degrees , and oxidized to water with copper(II) oxide. The water was converted into ammonia with sodium amide at 80 degrees . The ammonia was then titrated with electrolytically generated hypobromite ion. The blank value of single determination could be reduced to less than 1 mug of water. Hydrogen in stainless steels, tantalum metal and pure tin metal could be determined satisfactorily, and some results were compared with those obtained by the ordinary vacuum extraction method.     

TEMPO存在下丙二腈对苯乙烯聚合的加速作用研究

在少量丙二腈存在下,苯乙烯在稳定自由基TEMPO作用下的聚合速率显著增加,分子量分布较窄,且随转化率增大而增大,具有活性聚合特征.丙二腈与TEMPO的摩尔比在4:1时加速效果较好,在125℃下聚合1h转化率可达到70%,分子量可达到105,且反应温度降低到110℃.¹HNMR分析表明,丙二腈在反应中起催化剂作用,通过削弱碳氮键可以提高转化速度,还可明显降低聚合温度.     

Highly active nanoscale zero-valent iron (nZVI)-Fe3O4 nanocomposites for the removal of chromium(VI) from aqueous solutions

For the first time, nanoscale zero-valent iron (nZVI)-Fe(3)O(4) nanocomposites, prepared by an in situ reduction method, are employed for chromium(VI) removal in aqueous environment. 96.4% Cr(VI) could be removed by these novel materials within 2h under pH of 8.0 and initial Cr concentration of 20 mg L(-1), compared with 48.8% by bare nFe(3)O(4) and 18.8% by bare nZVI. Effects of several factors, including mass composition of nZVI-Fe(3)O(4) nanocomposites, initial pH and Cr(VI) concentration, were evaluated. The optimal ratio of nFe(3)O(4) to nZVI mass lies at 12:1 with a fixed nZVI concentration of 0.05 g L(-1). Low pH and initial Cr(VI) concentration could increase both the Cr(VI) removal efficiency and reaction rate. Corresponding reaction kinetics fitted well with the pseudo second-order adsorption model. Free energy change (ΔG) of this reaction was calculated to be -4.6 kJ mol(-1) by thermodynamic study, which confirmed its spontaneous and endothermic characteristic. The experimental data could be well described by the Langmuir and Freundlich model, and the maximum capacity (q(max)) obtained from the Langmuir model was 100 and 29.43 mg g(-1) at pH 3.0 and 8.0, respectively. The reaction mechanism was discussed in terms of the mutual benefit brought by the electron transfer from Fe(0) to Fe(3)O(4).     

Functional [6]pericyclynes: aromatization to substituted carbo-benzenes

Reductive treatment of stereoisomeric mixtures of variously substituted hexaoxy[6]pericyclynes with SnCl(2)/HCl led to the corresponding substituted carbo-benzenes. Tetramethoxyhexaphenyl[6]pericylynediol and dimethoxyhexaphenyl[6]pericyclynetetrol thus proved to be alternative precursors of hexaphenyl-carbo-benzene, previously described. Another hexaaryl-carbo-benzenic chromophore with 4-pyridyl and 4-anisyl substituents was targeted for its second-order nonlinear optical properties and was obtained by aromatization of a dimethoxy[6]pericyclynetetrol. Two alkynyl substituents in para positions were also found to be compatible with the C(18) carbo-benzene ring, provided that the four remaining vertices are substituted by phenyl groups. In the protected series, bis(trimethylsilylethynyl)hexaphenyl-carbo-benzene (C(18)Ph(4)(C triple bond C-TMS)(2)) could be isolated and fully characterized, even by X-ray crystallography. In the bis-terminal series, the diethynylhexaphenyl-carbo-benzene C(18)Ph(4)(C triple bond C-H)(2) could not be isolated in the pure form. It could, however, be generated by two different methods and identified by the corresponding (1)H NMR spectra. Unsubstituted carbo-benzene C(18)H(6) remains unknown, but tetraphenyl-carbo-benzenes C(18)Ph(4)H(2) with two unsubstituted vertices proved to be viable molecules. Whereas the "para" isomer could be characterized by MS and (1)H and (13)C NMR spectroscopy only in a mixture with polymeric materials, the "ortho" isomer (with adjacent CH vertices) could be isolated, and its structure was determined by using X-ray crystallography. The structure calculated at the B3PW91/6-31G** level of theory turned out to be in excellent agreement with the experimental structure. The (1)H and (13)C NMR chemical shifts of hexa- and tetraphenyl-carbo-benzenes were also calculated at the B3LYP/6-31+G** level of theory and were found to correlate with experimental spectra. The remote NMR deshielding of peripheral protons (through up to five bonds) revealed a very strong diatropic circulation around the C(18) ring, regardless of the substitution pattern. In full agreement with theoretical investigations, it has been demonstrated experimentally that the carbo-benzene ring is "independently" aromatic, in accord with structural-energetic and -magnetic criteria.     

Electrochemical immunoassay platform for high sensitivity protein detection based on redox-modified carbon nanotube labels

We report a highly sensitive immunoassay protocol based on the use of redox-modified multi-walled carbon nanotubes (MWNTs) as electrochemical labels. The MWNTs were coated with methylene blue (MB) at an optically-determined loading of 3.41 × 10(-3) mol g(-1), and were then attached to secondary antibodies (Ab(2)) by adsorption. As a model analyte mouse IgG was collected by primary antibody (Ab(1))-coated magnetic beads. Following binding of the MB-MWNT-Ab(2) conjugates, IgG could be measured by MB reduction. Using differential pulse voltammetry for quantification, IgG was calibrated with a dynamic range of 0.1 pg mL(-1) to 100 pg mL(-1). Given the different possible Ab(1)-MB-MWNT-Ab(2) orientations on the magnetic beads, it was likely that not all the MB communicated with the electrode. A greater quantity of MB could be accessed by using the Fe(CN)(6)(3-/4-) redox couple as a solution phase mediator. This enabled us to lower the dynamic range down to 5 fg mL(-1) to 100 fg mL(-1).     

Organic and inorganic selenium speciation in environmental and biological samples by nanometer-sized materials packed dual-column separation/preconcentration on-line coupled with ICP-MS

A novel, fast, and cheap nonchromatographic method for direct speciation of dissolved inorganic and organic selenium species in environmental and biological samples was developed by flow injection (FI) dual-column preconcentration/separation on-line coupled with ICP-MS determination. In the developed technique, the first column packed with nanometer-sized Al(2)O(3) could selectively adsorb the inorganic selenium [Se(IV), Se(VI)], and the retained inorganic selenium could be eluted by 0.2 mol l(-1) NaOH, while the organic Se [selenocystine (SeCys(2)) and selenomethionine (Se-Met)] was not retained. On the other hand, the second column packed with mesoporous TiO(2) chemically modified by dimercaptosuccinic acid (DMSA) could selectively adsorb Se(IV) and SeCys(2) and barely adsorb Se(VI) and Se-Met. When the sample solution was passed through the column 1, separation of inorganic selenium and organic selenium could be achieved first. Then, the effluent from column 1 was successively introduced into the column 2 and the speciation of organic selenium could be attained due to the different adsorption behaviors of Se-Met and SeCys(2) on DMSA modified TiO(2). After that, the eluent from column 1 contained Se(IV), and Se(VI) was adjusted to desired pH and injected into column 2, and the speciation of Se(IV) and Se(VI) could also be realized thanks to their different retention on column 2. The parameters affecting the separation were investigated systematically and the optimal separation conditions were established. The detection limits obtained for Se(IV), Se(VI), Se-Met and SeCys(2) were 45-210 ng l(-1) with precisions of 3.6-9.7%. The proposed method has been successfully applied for the speciation of dissolved inorganic and organic selenium in environmental and biological samples. In order to validate the methodology, the developed method was also applied to the speciation of selenium in certified reference material of SELM-1 yeast, and the determined values were in good agreement with the certified values.     

Chitosan-polycaprolactone copolymer microspheres for transforming growth factor-β1 delivery

Chitosan-polycaprolactone (CPC) copolymer microspheres loaded with transforming growth factor-β1 (TGF-β1) were fabricated with an emulsification method using sodium tripolyphosphate as crosslinker. They were found to be dense and had regular sphericity with various diameters changing from several hundred nanometers to a few micrometers. Their loading efficiency could be regulated by both the amount of crosslinker and the composition of CPCs, and some microspheres showed their loading efficiency higher than 80%. It was observed that in neutral PBS media, the composition of CPCs predominantly governed swelling behavior and release profiles of the microspheres while the effect of crosslinker on the swelling and release behavior was limited. The initial fast releases of TGF-β1 from different microspheres could be significantly decreased with increasing polycaprolactone content in CPCs, and some microspheres were able to maintain sustained releases of TGF-β1 by mainly controlling their composition. In addition, in a simulated acidic environment (pH 6.5) for cartilage lesions, release patterns of the microspheres were notably modulated by pH but some selected microspheres could still well administrate the release of TGF-β1 in a sustained way without severe burst features.     

Determination of hardness in tapwater and upland soil extracts using a long-term stable divalent cation selective electrode based on a lipophilic acrylate resin as a membrane matrix

A divalent cation-selective electrode, which utilizes a lipophilic resin as a matrix for the sensing membrane, and which has long-term stability has been developed. The sensing membrane is a lipophilic acrylate resin which is impregnated with a solution of 1-decylalcohol and the calcium salt of bis[4-(1,1,3,3-tetramethylbutyl) phenyl] phosphate at concentrations of 0.08 g ml(-1) each. The electrode exhibited nearly equal selectivity to Ca(2+) and Mg(2+) ions and could be used as a water hardness sensor. The electrode shows a Nernstian response with a slope of 29 mV decade(-1) to both Ca(2+) and Mg(2+) ions in the concentration range from 10(-5) M to 10(-1) M and could be used in the pH range from 3 to 10 for the determination of 10(-3) M Ca(2+) and Mg(2+) solutions. The initial performance of the electrode could be maintained for 1 year, since the lifetime test of the electrode was conducted in tapwater at a continuous flow rate of 4 ml min(-1). The hardnesses of tapwater and upland soil extracts were determined using the developed electrode and the analytical results were in good agreement with those obtained by chelatometric titration using an EDTA solution as the titrant. A coefficient factor of correlation 0.998 was obtained between the electrode method and titrimetry. The long-term stability of the electrode was found to be due to strong affinity of 1-decylalcohol to the lipophilic acrylate resin.