The extraction of iron(III) by dioctylarsinic acid in chloroform

Dioctylarsinic acid, HDOAA, in chloroform solution has been investigated as a reagent for the extraction of iron(III) chloride. The extraction coefficient reaches two maxima, one of 1.5 at 8.5 M hydrochloric acid and another of 7 at pH 2.3. Experiments in the range 4–8 M for sulfuric, nitric and perchloric acids showed no extraction of iron(III) from these solutions for extraction times of 6 h. Evidence for the extraction of H₃FeCl₆ from 4–9 M hydrochloric acid solutions as [(H₂DOAA)⁺]₃FeCl₆^3- is presented. The species extracted from aqueous solutions of pH 1–2.3 is probably a hydroxy complex of the composition [Fe₂(DOAA)₂(HDOAA)X₄(H₂0)₂ ](X = OH and/or Cl).     

The extraction of thulium(III), dysprosium(III) and samarium(III) by dioctylarsinic acid in chloroform

Dioctylarsinic acid, HDOAA, in chloroform (0.1 M) extracts thulium(III), dysprosium(III) and samarium(III) from their aqueous solutions in the pH ranges 1–6.5, 2–7 and 4–8, respectively, with extraction coefficients of approximately 0.1 for the lowest and 10 for the highest pH. The extractability increased with increasing ionic strength for each ion and decreased in the order ClO₄^- > NO₃^- > Cl^- > SO₄^2- > acetate for solutions of the same molarity. pH-Dependence curves had slopes ranging from 1.05 to 1.87. The reagent-dependence studies gave curves with slopes between 3.60 and 5.30. The general formula [MX_n(DOAA)_m(HDOAA)_p(H₂O)_q] (X = Cl^-. NO₃^-, SO₄^2-/2, ClO₄^-, acetate, OH^-; n+m=3, m+p=4 or 5, q?0)is suggested for the extracted species.     

Rhodanine complexes of zinc(II), cadmium(II), mercury(II) and mercury(I)

The following rhodanine (HRd) complexes of zinc(II), cadmium(II), mercury(II) and mercury(I) have been prepared and studied by i.r. spectra: M(Rd)₂(NH₃)₂ (MZn, Cd) with a 4N,2S-six-coordination; Zn₃(Rd)₄(CH₃COO)(OH), Cd₂(Rd)₃(HRd)₃(CH₃COO)(H₂O) in which the acetato anion is bicoordinated; Hg(Rd)₂, Hg₂(HRd)₃(BF₄)₂·0.5(HAc or EtOH), Hg(HRd)(CF₃COO)₂·H₂O in which both the ligands HRd and Rd⁻ are S,N-bonded to the metal; Hg(HRd)₂Cl₂, Hg(HRd)₄(ClO₄)₂ in which the ligand HRd is S-bonded; Hg₃(Rd)₃ · NH₃ with S,N-bonded Rd⁻ ligand.     

Synthesis of norfloxacin compounds with cobalt(II), zinc(II), cadmium(II), and mercury(II)

New compounds of norfloxacin (nfH, C₁₆H₁₈FN₃O₃) with cobalt(II), zinc(II), cadmium(II), and mercury(II) synthesized have the following compositions: Co(nfH-O,O’)₂(H₂O)₂](NO₃)₂, (nfH₂)₂CdCl₄ · 2H₂O, (nfH₂)₂ZnCl₄ · 2H₂O, (nfH₂)₂HgCl₄ · 2H₂O, and (nfH₃)HgCl₄. Their crystallographic parameters were determined. The first listed compound is isostructural to the known zinc analogue. Norfloxacin coordination modes in these complexes are considered.     

Formation of ferricyanides-I silver(I), copper(II) and cadmium(II)

With potassium ferricyanide copper(II) forms KCu(10),[Fe(CN)(6)](7) quantitatively in 0.5M potassium nitrate medium. Cadmium forms Cd(3)[Fe(CN)(6)](2) if the ferricyanide is added to the cadmium solution in absence of extra potassium, and KCd(10)[Fe(CN)(6)](7) if potassium is added first, or if the cadmium solution is added to the ferricyanide. Silver forms Ag(3)Fe(CN)(6) only.     

Complexes of cobalt(II), nickel(II), copper(II), cadmium(II), and mercury(II) with tetradentate Schiff base ligands

Summary A series of metal complexes with three new tetradentate Schiff bases derived from benzoin and benzil withc-toluidine and benzil with diaminoethane have been prepared and characterised by physical and chemical methods. The modes of bonding of the ligands with the metal ions have been proposed. Electronic spectra and room temperature magnetic moment values suggest octahedral geometry for the Co^II and Ni^II complexes, whereas the Hg^II and Cd^II complexes have tetrahedral geometry. The Cu^II complexes are square planar. Apart from the complexes of the Schiff bases derived from benzoin, all the other complexes have high molar conductance values suggesting them to be electrolytes. The complexes have been screened against some fungal pathogens.     

Two-phase potentiometric metal extraction titrations of silver(I), copper(II) and cadmium(II) using some cation-exchangers as extractants

The use of two-phase potentiometric metal extraction titrations to study solvent extraction equilibria is described. The method provides a highly reproducible and convenient manner by which to determine extraction behaviour. The system was tested on a number of acidic extractants, namely D2EHPA, Ionquest 801, Cyanex 272, naphthenic acid and Versatic 10 acid. The extraction from an aqueous nitrate medium of silver(I), copper(II) and cadmium(II) was studied. The potentiometric data were used to obtain extraction curves and elucidate the nature of the extracted complexes by slope analysis and non-linear least squares treatment. In general, the following extraction order was obtained: D2EHPA > Ionquest 801 > Cyanex 272 and naphthenic > Versatic 10 for copper(II) and cadmium(II). Organophosphorus acids were shown to form complexes of the nature of Cu(HA(2))(2) with copper(II) and carboxylic acids formed dimeric complexes (CuA(2)(HA))(2). With cadmium octahedral complexes of the form CdA(2)(HA)(4) occurred. The extraction of silver(I) by Versatic 10 gave a dimeric complex (AgA(HA))(2). HA denotes the extractant in the acid form.     

Synergic extraction of cobalt(II) by thenoyltrifluoroacetone and some amine extractants in chloroform

Synergic extraction of Co²⁺ with thenoyltrifluoroacetone and eight different amines in chloroform was investigated. It is found that the extracted adducts have the general formula Co(TTA)₂·B, where B stands for the amine. The stability sequence of the adducts obtained as related to the different classes of benzylamines is; dibenzylamine > benzylamine ⩽ tribenzylamine. A linear decrease in log β with the increase of Taft inductive constant was obtained on using tertiary long chain alkylamines as synergic ligand. UV and IR spectroscopic investigations support the direct bonding of the amine to the metal.     

Chelated complexes of cadmium(II), cobalt(II), copper(II), mercury(II), nickel(II), uranyl(II) and zinc(II) with benzil bis(4-phenylthiosemicarbazone)

Summary Complexes of Co^II, Ni^II, Cu^II, Zn^II, Cd^II, Hg^II and UO ₂ ^II with benzil bis(4-phenylthiosemicarbazone), H₂BPT, have been synthesized and their structures assigned based on elemental analysis, molar conductivity, magnetic susceptibility and spectroscopic measurements. The i.r. spectra suggest that the ligand behaves as a binegative quadridentate (NSSN) (Co^II, Cu^II, Hg^II and UO ₂ ^II complexes) or as a binegative quadridentate-neutral bidentate chelating agent (Ni^II, Zn^II and Cd^II complexes). Octahedral structures for the Co^II and Ni^II complexes and square-planar structure for the Cu^II complex are suggested on the basis of magnetic and spectral evidence. The crystal field parameters (Dq, B and _B) for the Co^II complex are calculated and agree fairly well with the values reported for known octahedral complexes. The ligand can be used for the microdetermination of Ni^II ions of concentration in the 0.4–6×10^–4 mol l^–1 range and the apparent formation constant for the species generated in solution has also been calculated.     

Metallatriazadiphosphorines of zinc(II), cadmium(II) and mercury(II)

Metallatriazadiphosphorine complexes corresponding to [{N(PPh₂NR)₂}M(OAc)] and [{N(PPh₂NR)₂}₂M], (R = Ph or SiMe₃; M = Zn, Cd or Hg) have been synthesized under strictly anhydrous and inert conditions by the reaction of the acyclic bis-silylated phosphazene ligand, [HN(PPh₂NSiMe₃)₂], or the bis-phenylated phosphazene ligand, [HN(PPh₂NPh)₂], with Zn, Cd and Hg acetate in 1:1 and 2:1 molar ratios. These complexes are highly soluble in common organic solvents, but unstable hydrolytically as well as thermally, even under reduced pressure. Molecular weight determinations in benzene indicated the monomeric nature of these complexes. Further, they have been characterized on the basis of elemental analysis and spectral studies: i.r. and n.m.r. (¹H, ¹³C and ³¹P) that plausibly reveal a trigonal planar and tetrahedral geometry around the metal atom in the complexes.     

Separation of zinc(II), cadmium(II) and mercury by solvent extraction using thiocarbohydrazide and the complexing agent

The extraction behaviour is reported of zinc(II), cadmium(II) and mercury(II) complexes of thiocarbohydrazide in benzene, chloroform, carbon tetrachloride, di-isopropyl ether, ethyl acetate, amyl acetate, and amyl alcohol. The separation of the three elements has been achieved by the use of various masking agents, as well as by making use of the effect ofpH on their extractability. This work was carried out under CSIR (India) Scheme No. 1 (450/69 GAU. II.     

Polymetallic complexes: Part VI. Schiff base complexes of cobalt(II), copper(II), nickel(II), zinc(II), cadmium(II) and mercury(II)

Summary The doubly bidentate ON-NO donor Schiff base, prepared from salicylaldehyde and 4,4-diaminodiphenylmethane forms complexes with 11 metal: ligand stoichiometric ratios. The cobalt(II), copper(II) and nickel(II) complexes exhibit subnormal magnetic moments. All the six complexes possess high melting points and are sparingly soluble in common organic solvents. A dinuclear octahedral structure is proposed for the cobalt(II), copper(II), nickel(II) and zinc(II) complexes and a dinuclear tetrahedral configuration is suggested for the cadmium(II) and mercury(II) complexes on the basis of analytical, conductance, magnetic susceptibility, molecular weight, i.r. and electronic spectral data.     

2,2′-bipyridylamine complexes of silver(I), zinc(II) and cadmium (II) nitrates

Summary Coordination compounds formed by the interaction of 2,2bipyridylamine with silver(I), zinc(II) and cadmium(II) nitrates have been prepared and characterized by molecular conductance and i.r. spectral measurements down to 200 cm^–1 in the solid state. Silver([) and zinc(II) nitrates formed 1 : 1 complexes, while cadmium(II) nitrate gave a 1 : 2 complex with 2,2-bipyridylamine. Molar conductivities indicate that the silver complex behaves as a uniunivalent electrolyte while the zinc(II) and cadmium(II) complexes behave as unidivalent electrolytes in methanol and dimethylformamide. All the complexes are considered monomeric with terminally bonded monodentate nitrato groups. Four-coordinate tetrahedral, three-coordinate planar and six-coordinate octahedral stereo chemistries are suggested for the zinc(II), silver(l) and cadmium(II) nitrate complexes with 2,2-bipyridylamine, respectively.     

Sulfadrug complexes of zinc(II), cadmium(II) and mercury(II)

Summary Zn^II, Cd^II and Hg^II complexes of sulfadrugs,viz., sulfathiazole, sulfadiazine, sulfamerazine and sulfamethazine were prepared and characterized by analytical and spectroscopic data. The complexes are insoluble and melt with decomposition. The drugs act as bidentate ligands yielding polymeric complexes except for the Zn^II(sulfamethazine) complex in which the drug is monodentate.     

Synthesis and X-ray structural characterization of cobalt(II), copper(II), and silver(I) complexes of triphenylphosphoniopropionate

Four transition-metal carboxylate-like complexes have been synthesized from the reaction of the tertiary phosphine betaine triphenylphosphoniopropionate, Ph₃P⁺(CH₂)₂CO ₂ ^– , with Co(ClO₄)₂· 6H₂O, Cu(ClO₄)₂·6H₂O, Cu(BF₄)₂·xH₂O, and AgClO₄, respectively, and fully characterized by single-crystal X-ray analysis. [CoPh₃P(CH₂)₂CO_{2 4}(H₂O)₂](ClO₄)₂·2H₂O, 1, space groupP¯ l witha=9.195(2),b=13.000(2),c=18.795(3) Å,=102.52(1),=90.12(1),=109.28(2)° andZ=1; [CuPh₃P(CH₂)₂CO_{2 4}][Cu₂ -Ph₃P(CH₂)₂CO₂ -O,O ₄(H₂O)₂] (ClO₄)₆· 4H₂O, 2, space groupP2_l/c witha=14.225(3),b=24.624(6),c=24.297(5) Å,=94.18(1)°, andZ=2; [CuPh₃,P(CH₂)₂CO₂Me₂N(CH₂)₂NMe₂(H₂O)₂](BF₄)₂,3, space groupP2_l/c witha=17.668(2),b=13.454(3),c=15.876(2) Å,=116.45(1)°, andZ=4; [Ag₂Ph₃P(CH₂)₂CO_{2 2}(ClO₄)]₂(ClO₄)₂,4, space groupP¯ l witha=10.925(2),b=13.110(3),c=18.795(3) Å,=82.93(3),=87.45(3),=67.49(3)°, andZ=2. In complex1, the cobalt(II) atom is located in an inversion center and coordinated by four unidentate betaine ligands and a pair oftrans aqua ligands, and strong hydrogen bonds are formed between the aqua ligands and the pendant oxygen atoms of the betaine ligands. In complex2, mononuclear and dinuclear cations coexist in the asymmetric unit. In the mixed-ligand complex3 the betaine ligand acts in the unidentate coordination mode andN,N,N,N-tetramethylethylenediamine (tmen) in the chelate mode. Complex4 contains a discrete centrosymmetric tetranuclear cations in which one pair of betaine ligands act in the bidentate bridging mode and the other in both bidentate and one-atom bridging modes.     

Metal-organic architectures of silver(I), cadmium(II), and copper(II) with a flexible tricarboxylate ligand

Three novel metal-organic architectures, [Ag3(bta)].1.5H2O (1), [Cd3(bta)2(H2O)7].5H2O (2), and [Cu11(bta)6(Hbta)2(H2O)10].29H2O (3), were obtained by reactions of the corresponding metal salts with a flexible tripodal ligand, benzene-1,3,5-triacetic acid (H3bta), and their structures were determined by single-crystal X-ray diffraction studies. The results revealed that, in complexes 1 and 2, the carboxylate groups of the bta3- ligand adopted varied coordination modes to link metal atoms and further to form three-dimensional structures with open channels occupied by water molecules, while in complex 3, for the first time, the flexible H3bta acted as a secondary building unit to generate a novel nanometer-sized metallocage, which is composed of a Cu(II) paddle wheel (square secondary building units) and bta3-/Hbta2- organic links (triangular secondary building units). The photoluminescence properties of complexes 1 and 2 were investigated, and the results showed that 2 exhibited photoluminescence in the solid state at room temperature.     

Copper(II), cobalt(II), nickel(II) and mercury(II) complexes of 1,4-diphenylthiosemicarbazide

Summary The preparation and characterization of Cu^II, Co^II, Ni^II and Hg^II complexes containing 1,4-diphenylthiosemicarbazide (DPhTSC) of the type [Cu(DPhTSC-H)X.H₂O]nH₂O (X= Cl, Br or Ac; n=0 or 1) · [M(DPhTSC-H)₂yH₂O] (M=Co^II or Ni^II; y=0 or 1) and [Hg(DPhTSC)Cl₂]2 H₂O and [Cu(D-PhTSC)₂SO₄]H₂O are reported. The stereochemistry of the complexes have been studied with the help of magnetic and electronic measurements. The anomalous magnetic moments observed in all cases have been explained. The i.r. spectral studies have been used to determine the bonding sites in the complexes.