DSC investigation of the thermal behaviour of (NH4)2SO4, NH4HSO4 and NH4NH2SO3

Gaseous products evolved from (NH₄)₂SO₄, NH₄HSO₄ and NH₄NH₂SO₃ during successive heating and cooling cycles were flushed with inert gas into analyzer Dräger tubes hooked tightly to the terminal port of the DSC cell base. This simple procedure allowed the starting temperature of the decomposition to be determined and the amount of the individual gases in the mixture to be identified and even estimated. NH₄NH₂SO₃ at 523 K in humid air produced HNH₂SO₃ initially and, on further cycling, (NH₄)₂SO₄ and NH₄HSO₄ also appeared. The ΔH_f values for NH₄HSO₄ were (kJ mole^?1): in an airtight sample holder 12.67, in a dry argon atmosphere 11.93, and in a static air atmosphere 10.92. Endothermic peaks for (NH₄)₂SO₄ and 498 and 411 K represented the incongruent melting point and the polymorphic transition of (NH₄)₂SO₄·NH₄HSO₄. After the first heating in air to 530 K, (NH₄)₂SO₄ and NH₄HSO₄ exhibited closely similar cyclic DSC curves. The endothermic peaks at about 393–420 K may be assigned to different combinations of (NH₄)₂SO₄ and NH₄HSO₄.     

Hydrolysis of magnesium hydride in the presence of ammonium salts

The influence of the nature of ammonium salts (NH₄Cl, (NH₄)₂SO₄, (NH₄)HSO₄, [(CH₃)NH₃]Cl) and their concentration in aqueous solutions on the hydrolysis of magnesium hydride has been studied. The highest degree and fastest rate of hydrolysis are observed at an ammonium salt concentration of ～7.5%. The most efficient activator among the ammonium salts under consideration is (NH₄)HSO₄.     

DSC studies of binary inorganic ammonium compound systems

The thermal behaviour of the binary systems HNH₂SO₃-NH₄NH₂SO₃ (I), HNH₂SO₃-(NH₄)₂SO₄ (II), HNH₂SO₃-NH₄HSO₄ (III), NH₄NH₂SO₃-(NH₄)₂SO₄ (IV), NH₄NH₂SO₃-NH₄HSO₄ (V), (NH₄)₂SO₄-NH₄HSO₄ (VI) was investigated with a Du Pont Thermal Analyzer supplied with a DSC module. The corresponding single compounds and freshly prepared (NH₄)₂S₂O₇ were examined under the same conditions in preliminary experiments. The ΔH _f values of HNH₂SO₃, NH₄NH₂SO₃, (NH₄)₂S₂O₇ and (NH₄)₂SO₄ · NH₄HSO₄ determined in the absence of air were 11.9, 16.8, 11.7 and 11.7 kJ/mole. Due to the moisture content of the atmosphere, an repeated heating in air the DSC curves showed more endothermic peaks than under air-free conditions. Exothermic additive reactions took place for binary systems (I) and (III), resulting in the formation of (NH₄SO₃)₂NH and (NH₄)₂S₂O₇, respectively, and for systems (II) and (VI), producing a new compound on melting.     

Zur Kenntnis der Sulfito-kobalt(III)-Ammine. III. Hydrogensulfitokobalt(III)-Ammine

Sulphito Cobalt(III) Ammines. III. Hydrogensulphito Cobalt(III) Ammines Concentrated acids react with [CoSO₃(NH₃)₅]⁺ salts hydrogen- sulphitopentaamminecobalt(III) complexes. [Co(HSO₃)(NH₃)₅]Cl₂, [Co(HSO₃)(NH₃)₅]Br₂ and [Co(HSO₃)(NH₃)₅](HSO₄)₂·H₂O have been isolated. These substances are yellow coloured in contrast to an earlier work which reported red colour. Furthermore, the hydrogensulphitoacidotetreaammine complexes [Co(HSO₃)Cl(NH₃)₄]Cl, [Co(HSO₃)Cl(NH₃)₄]ClO₄·H₂O, [Co(HSO₃)Br(NH₃)₄]Br and [Co(HSO₃) CN(NH₃)₄]Cl habe been prepared. [Co(HSO₃)Br(NH₃)₄]Br is losing spontaneously HBr forming [CoSO₃Br(NH₃)₄]. The neutral complex [Co(HSO₃)SO₃(NH₃)₄]·1/2H₂O has been obtained from cis- NH₄[Co(SO₃)₂(NH₃)₄] and HCl. The absorption spectra in the IR, visible and UV region are reported and discussed. The HSO₃ group is coordinated to Co through the S atom. The Co? S bond is weaker than in the sulphito complexes as concluded from the RAMAN spectrum. In the new complexes, the hydrogensulphito ligand causes a minor trans effect than the sulphito ligand.     

Mechanistic study of cerium(IV) oxidation of antimony(III) in aqueous sulphuric acid in the presence of micro amounts of manganese(II) by stopped flow technique

The oxidation of antimony(III) by cerium(IV) has been studied spectrometrically (stopped flow technique) in aqueous sulphuric acid medium. A minute amount of manganese(II) (10⁻⁵ mol dm⁻³) is sufficient to enhance the slow reaction between antimony(III) and cerium(IV). The stoichiometry is 1:2, i.e. one mole of antimony(III) requires two moles of cerium(IV). The reaction is first order in both cerium(IV) and manganese(II) concentrations. The order with respect to antimony(III) concentration is less than unity (ca 0.3). Increase in sulphuric acid concentration decreases the reaction rate. The added sulphate and bisulphate decreases the rate of reaction. The added products cerium(III) and antimony(V) did not have any significant effect on the reaction rate. The active species of oxidant, substrate and catalyst are Ce(SO₄)₂, [Sb(OH)(HSO₄)]⁺ and [Mn(H₂O)₄]²⁺, respectively. The activation parameters were determined with respect to the slow step. Possible mechanisms are proposed and reaction constants involved have been determined.     

Application of countercurrent chromatography to the purification of chemical reagents

Countercurrent chromatography has been employed for the purification of solid chemical reagents, such as (NH₄)₂SO₄, NH₄HSO₄, NH₄F and NH₄Cl from a number of most common metal impurities (Fe, Al, Zn, Cu, Co, Cd, Ni, Cr, Ca, Mg, K) in order to gain high-purity reagents. After evaporation these can be used for fusion decomposition purposes in trace analysis of various refractory materials (e.g. high tech ceramics). N,N-hexamethylenedithiocarbamic acid, 8-hydroxyquinoline, dibenzo-18-crown-6 and dicyclohexano-18-crown-6 were used as extracting reagents.     

Cyclization reactions of long-lived 10,10-dimethyl-9-phenylethynyl-9,10-dihydrophenanthren-9-yl cation

According to the NMR data, long-lived 10,10-dimethyl-9-phenylethynyl-9,10-dihydrophenanthren-9-ylium in acid medium undergoes cyclization whose direction is determined by the acidity of the medium. The cyclization in HSO₃F-SbF₅ superacid involves the aromatic ring in the phenanthrene core as nucleophilic component and yields 5a,6-dimethyl-4-phenyl-4,5,5a,6-tetrahydroacephenantrylene-4,6-bis(ylium). In trifluoroacetic acid the nucleophilic component is the side-chain phenyl group, and the cyclization product is neutral 8b,14b-dimethyl-8b,14b-dihydrobenzo[g]chrysen-10-yl trifluoroacetate. Both cyclization directions are observed in moderate-strength trifluoromethanesulfonic acid.     

Onium Sulfates and Hydrogen Sulfates: Products of Reactions of Sulfur(IV) Oxide with Aqueous Solutions of Alkylamines and Aniline

The reaction products formed in the SO₂–L–H₂O–O₂ systems (L is n-propylamine, n-butylamine, tert-butylamine, n-heptylamine, n-octylamine, aniline) were isolated and identified as “onium” salts [n-C₃H₇NH₃]₂SO₄, [n-C₄H₉NH₃]₂SO₄, [t-C₄H₉NH₃]₂SO₄, [n-C₇H₁₅NH₃]₃SO₄(HSO₄), [n-C₈H₁₇NH₃]₃SO₄(HSO₄), and [C₆H₅NH₃]₂SO₄. The products were characterized by elemental analysis, IR and Raman spectroscopy, mass spectrometry, and thermogravimetry.     

Spectral analysis of naringenin deprotonation in aqueous ethanol solutions

The deprotonation of 5,7-dihydroxy-2-(4-hydroxyphenyl)chroman-4-one (naringenin) was studied in aqueous solutions of ethanol and 0.1 mol L^?1 sodium perchlorate at 25°C. The chemical species that contributed to deprotonation were evaluated together with their pure spectral characteristics and concentration profiles by some chemometric methods. The deprotonation constants assigned by pK ₁, pK ₂, and pK ₃ were determined by multivariate curve analysis of spectral data at different pcH values. The pure spectral analysis concordant with the theoretical prediction of deprotonation constants indicates that the acidity of hydroxyl groups in naringenin decreases in the order: 7-OH, 4′-OH, 5-OH. The effects of the solvent on deprotonation were analysed in terms of the linear solvation energy relationships using the model of Kamlet, Abboud, and Taft (KAT). Multiple linear regressions were aimed towards correlating the deprotonation constants with the microscopic parameters containing hydrogen-bond acidity (α), dipolarity/polarisability (π*), and hydrogen-bond basicity (β). The most significant parameter was found to be the hydrogen-bond acidity of binary mixtures.     

Structure,synthesis, and thermal properties of trans-[Ru(NO)(NH3)4(SO4)]NO3·H2O

In treatment of trans-[Ru(NO)(NH₃)₄(OH)]Cl₂ with concentrated sulfuric acid on heating trans-[Ru(NO)(NH₃)₄(SO₄)](HSO₄)·H₂O (I) is obtained with a yield close to quantitative. In the interaction of the saturated solution of I with a saturated NaNO₃ solution a trans-[Ru(NO)(NH₃)₄(SO₄)]NO₃·H₂O (II) precipitate forms whose structure is determined by single crystal XRD: space group P2₁2₁2₁, a = 6.8406(3) Å, b = 12.6581(5) Å, c = 13.3291(5) Å. A monodentately coordinated sulfate ion is in the trans-position to the nitroso group. Compound II is characterized by IR spectroscopy, powder XRD, and diffuse reflectance spectroscopy. The process of its thermolysis is studied; by differential scanning calorimetry the thermal effect of the dehydration reaction occurring on heating to 120°C (ΔH = 58.9 ± 1.5 kJ/mol) is estimated. The final product of the thermolysis of II is a mixture of Ru and RuO₂.     

Melemium Hydrogensulfate H3C6N7(NH2)3(HSO4)3 – the First Triple Protonation of Melem

We synthesized melemium hydrogensulfate H₃C₆N₇(NH₂)₃(HSO₄)₃ by reaction of melem with 70 % sulfuric acid. The crystal structure was elucidated by single‐crystal XRD (P2₁/n (no. 14), Z = 4, a = 10.277(2), b = 14.921(3), c = 11.771(2) Å, β = 99.24(3)°, V = 1781.5(6) Å³). H₃C₆N₇(NH₂)₃(HSO₄)₃ is the first compound displaying a triple protonation of melem., In this contribution an overview of accessible melemium sulfates depending on the concentration of sulfuric acid is given. Two additional melemium sulfates were identified this way.     

Synthese,Struktur und Reaktivität der Erdalkalihydrogensulfate des Mg,Ca, Sr und Ba

Synthesis, Structure, and Reactivity of the Alkaline Earth Hydrogen Sulfates of Mg, Ca, Sr, and Ba The pure compounds of Ba(HSO₄)₂, Sr(HSO₄)₂ and Mg(HSO₄)₂ were prepared and identified as real hydrogensulfates. In contact with moist air Mg(HSO₄)₂ forms the monohydrate Mg(HSO₄)₂ · H₂O which can be dehydrated into Mg(HSO₄)₂ at about 120°C. The hydration of Mg(HSO₄)₂ proceeds crystallographically oriented. The unit cell parameters and the d-values of the new compounds were determined. Ba(HSO₄)₂ and Sr(HSO₄)₂ cristallize orthorhombic, Mg(HSO₄)₂ monoclinic and Mg(HSO₄)₂ · H₂O triclinic. Sr(HSO₄)₂ is isotypic in regard to Ca(HSO₄)₂. The relationship between the crystal structures and the chemical properties of the earth alkaline sulfates are discussed.     

Kinetics of the Formation of Goethite in the Presence of Sulfates and Chlorides of Monovalent Cations

The synthesis of goethite by oxidation of Fe²⁺in presence of metallic iron was undertaken in an aqueous medium containing indifferent salts such as Na₂SO₄, (NH₄)₂SO₄, NaCl, and NH₄Cl. Temperature and bubbling air rate were maintained, respectively, at 70°C and 1 L/min. The influence of anions and cations on the kinetics of each step of the process has been followed distinctly, the iron dissolution rate has been determined by the variation of the medium acidity, and the precipitation of goethite has been determined by gravimetric measurements. With respect to Cl⁻, the SO₄²⁻anion decreases the rate of the two reactions. NH₄⁺acts as an inhibitor when it is present at low concentrations and as an accelerator for higher concentrations; the limit corresponding to the change of NH₄⁺behavior depends on the nature of the counter ion. The reaction product is composed of pure goethite in the presence of sulfate salts, whereas a mixture of goethite and lepidocrocite, respectively, 60–70 and 40–30%, was observed in the presence of chloride salts.     

Synthese und Kristallstruktur von Y(HSO4)3-I und Y(HSO4)3 · H2O

Syntheses and Crystal Structures of Y(HSO₄)₃-I and Y(HSO₄)₃ · H₂O Lath shaped crystals of Y(HSO₄)-I are obtained by treatment of Y₂O₃ with conc. sulfuric acid at 200 °C. Y(HSO₄)₃-I crystallizes orthorhombic (Pbca, Z = 8, a = 1201.5(1), b = 953.76(8), c = 1650.4(1) pm, R_all = 0.0388). In the crystal structure Y³⁺ is coordinated by eight monodentate HSO₄^– groups. Colorless, plate like single crystals of Y(HSO₄)₃ · H₂O grew from a solution of Y₂O₃ in 85% sulfuric acid upon cooling. In the crystal structure of the triclinic compound (P1, Z = 2, a = 679.8(1), b = 802.8(2), c = 965.9(2) pm, α = 79.99(2)°, β = 77.32(2)°, γ = 77.50(2)°, R_all = 0.0264) Y³⁺ is surrounded by seven HSO₄^– groups and one molecule of water.     

酸性离子液体催化油酸酯化合成生物柴油简

酸性离子液体具有催化活性好、选择性高及易于回收等优点,是一种应用前景非常好的环境友好的酸性催化剂,在生物柴油合成反应中具有重大的理论意义和应用价值. 本文以油酸和甲醇为原料,探讨了7种不同酸性离子液体在生物柴油合成反应中的催化效应. 研究表明,离子液体酸性越强,催化酯化活性越高;引入磺酸基团可大大增强离子液体Brönsted酸性,使其在酯化反应中发挥溶剂/催化剂的双重作用,促进酯化反应向产物方向进行,达到高产率,因而1-丁基磺酸-3-甲基咪唑硫酸氢盐（[BHSO₃MIM]HSO₄）催化效果最好. 此外,系统研究了[BHSO₃MIM]HSO₄催化油酸与甲醇酯化反应,并采用响应面法优化了反应条件. 结果发现,该反应的最适醇酸摩尔比、催化剂用量、反应温度及反应时间分别为4：1,10%（基于油酸的质量）,130 ℃和4 h;在此条件下,生物柴油产率为97.7%. [BHSO₃MIM]HSO₄连续使用10批次后,仍能保持初始催化活性的95.6%,表现出极好的操作稳定性. 另外,利用该离子液体催化游离脂肪酸含量为72%的废油脂生产生物柴油,反应6 h可获得产率94.9%. 可见,[BHSO₃MIM]HSO₄在酯化生产生物柴油方面具有巨大的应用潜力.     

Ionic liquid [Hmim]HSO4-promoted one-pot oxidative conjugate addition of sulfur-centred nucleophiles to Baylis-Hillman adducts

The first example of the one-pot oxidative conjugate addition of sulfur-centred nucleophiles to Baylis-Hillman adducts is reported. The reaction involves oxidation of Baylis-Hillman adducts with NaNO₃ in the Brønsted acidic ionic liquid [Hmim]HSO₄ to give [E]-α-cyanocinnamaldehydes followed by conjugate hydrothiocyanation/hydrosulfenylation with NH₄SCN/PhSH to afford the corresponding β-thiocyanato (or β-phenylsulfenyl)-α-cyanohydrocinnamaldehydes diastereoselectively in 76-89% yields in a one-pot procedure. After isolation of the product, the ionic liquid [Hmim]HSO₄ could be easily recycled for further use.     

Determination of Strong Acid in Air-Borne Matter

Abstract

A titration variant for determination of strong acid in air-borne matter with Gran's plot method is proposed. The procedure can be applied to the titration of non sufficiently acidic samples containing weak acids as NH₄ ⁺, HSO₄ ^? and protolyzable ions. Interferences due to the presence of these species are evaluated.     

New method for the synthesis of trans-hydroxotetraamminenitrosoruthenium(II) dichloride and its characterization

A procedure for the synthesis of mpa h c-[Ru(NO)(NH₃)₄(OH)]Cl₂ in a nearly quantitative yield (～95%) comprising treatment of a solution of (NH₄)₂[Ru(NO)Cl₅] with ammonium carbonate at t ～80°C was developed. It was found that [Ru(NO)(NH₃)₄(H₂O)]Cl₃·H₂O and trans-[Ru(NO)(NH₃)₄Cl]Cl₂ formed in the reaction of [Ru(NO)(NH₃)₄(OH)]Cl₂ with hydrochloric acid at various temperatures most often contain some initial hydroxy complex. The former compound is unstable, even at room temperature, it slowly eliminates water and HCl. A procedure for preparing the latter compound in a pure state in 85–90% yield was proposed. The acidity constant of the complex trans-[Ru(NO)(NH₃)₄(H₂O)]³⁺ at room temperature (K _a = (4 ± 1) × 10^?2) was estimated by ¹⁴N NMR spectroscopy.     

Bor-tris-(trifluoromethansulfonat), B(OSO2CF3)3 in Trifluoromethansulfonsäure – ein neues „supersaures System”︁

Boron-tris(trifluoromethane-sulfonate), B(OSO₂CF₃)₃, in Trifluoromethane Sulfonic Acid — a New ?Super Acid System”? The system of boron-tris(trifluoromethane-sulfonate) in excess trifluoromethane sulfonic acid, was investigated as a proton donor. The Hammett acidity functions, H₀, were determined in relation to the concentration of B(OSO₂CF₃)₃ using various indicators. The system is comparable to SbF₅ · 3 SO₃ in HSO₃F, the most acidic system known until now.     

The extraction of chromium(VI) from sulphuric acid solutions by 4-(5-nonyl)pyridine and its separation from fission products

4-(5-Nonyl)pyridine, a new liquid anion exchanger, has been studied for the extraction of chromium(VI) from sulphuric acid solutions. The optimal acidity is 0.1–1 M, depending on the concentration of chromium. Common anions have little effect on extraction in concentrations up to 0.1 M. Reducing agents such as ascorbic acid and thiosulphate prevent extraction at concentrations above 0.1 M. Separation of chromium(VI) from fission products was achieved.