Aggregation‐Induced Delayed Fluorescence Luminogens for Efficient Organic Light‐Emitting Diodes

Aggregation‐induced delayed fluorescence (AIDF) can be regarded as a special case of aggregation‐induced emission (AIE). Luminogens with AIDF can simultaneously emit strongly in solid state and fully utilize the singlet and triplet excitons in organic light‐emitting diodes (OLEDs). In this work, two new AIDF luminogens, DMF‐BP‐DMAC and DPF‐BP‐DMAC, with an asymmetric D–A–D′ structure, are designed and synthesized. The characteristics of both luminogens are systematically investigated, including single crystal structures, theoretical calculations, photophysical properties and thermal stabilities. Inspired by their AIDF nature, the green‐emission non‐doped OLEDs based on them are fabricated, which afford good electroluminescence performances, with low turn‐on voltages of 2.8 V, high luminance of 52560 cd m^?2, high efficiencies of up to 14.4 %, 42.3 cd A^?1 and 30.2 lm W^?1, and very small efficiency roll‐off. The results strongly indicate the bright future of non‐doped OLEDs on the basis of robust AIDF luminogens.     

2,5‐Difluorenyl‐Substituted Siloles for the Fabrication of High‐Performance Yellow Organic Light‐Emitting Diodes

2,3,4,5‐Tetraarylsiloles are a class of important luminogenic materials with efficient solid‐state emission and excellent electron‐transport capacity. However, those exhibiting outstanding electroluminescence properties are still rare. In this work, bulky 9,9‐dimethylfluorenyl, 9,9‐diphenylfluorenyl, and 9,9′‐spirobifluorenyl substituents were introduced into the 2,5‐positions of silole rings. The resulting 2,5‐difluorenyl‐substituted siloles are thermally stable and have low‐lying LUMO energy levels. Crystallographic analysis revealed that intramolecular π–π interactions are prone to form between 9,9′‐spirobifluorene units and phenyl rings at the 3,4‐positions of the silole ring. In the solution state, these new siloles show weak blue and green emission bands, arising from the fluorenyl groups and silole rings with a certain extension of π conjugation, respectively. With increasing substituent volume, intramolecular rotation is decreased, and thus the emissions of the present siloles gradually improved and they showed higher fluorescence quantum yields (Φ_F=2.5–5.4 %) than 2,3,4,5‐tetraphenylsiloles. They are highly emissive in solid films, with dominant green to yellow emissions and good solid‐state Φ_F values (75–88 %). Efficient organic light‐emitting diodes were fabricated by adopting them as host emitters and gave high luminance, current efficiency, and power efficiency of up to 44 100 cd m^?2, 18.3 cd A^?1, and 15.7 lm W^?1, respectively. Notably, a maximum external quantum efficiency of 5.5 % was achieved in an optimized device.     

Bipolar Host Materials for Organic Light‐Emitting Diodes

It is important to balance holes and electrons in the emitting layer of organic light‐emitting diodes to maximize recombination efficiency and the accompanying external quantum efficiency. Therefore, the host materials of the emitting layer should transport both holes and electrons for the charge balance. From this perspective, bipolar hosts have been popular as the host materials of thermally activated delayed fluorescent devices and phosphorescent organic light‐emitting diodes. In this review, we have summarized recent developments of bipolar hosts and suggested perspectives of host materials for organic light‐emitting diodes.     

Luminescent Platinum(II) Complexes of 1,3‐Bis(N‐alkylbenzimidazol‐ 2′‐yl)benzene‐Type Ligands with Potential Applications in Efficient Organic Light‐Emitting Diodes

A series of luminescent platinum(II) complexes of tridentate 1,3‐bis(N‐alkylbenzimidazol‐2′‐yl)benzene (bzimb) ligands has been synthesized and characterized. One of these platinum(II) complexes has been structurally characterized by X‐ray crystallography. Their electrochemical, electronic absorption, and luminescence properties have been investigated. Computational studies have been performed on this class of complexes to elucidate the origin of their photophysical properties. Some of these complexes have been utilized in the fabrication of organic light‐emitting diodes (OLEDs) by using either vapor deposition or spin‐coating techniques. Chloroplatinum(II)? bzimb complexes that are functionalized at the 5‐position of the aryl ring, [Pt(R‐bzimb)Cl], not only show tunable emission color but also exhibit high current and external quantum efficiencies in OLEDs. Concentration‐dependent dual‐emissive behavior was observed in multilayer OLEDs upon the incorporation of pyrenyl ligand into the Pt(bzimb) system. Devices doped with low concentrations of the complexes gave rise to white‐light emission, thereby representing a unique class of small‐molecule, platinum(II)‐based white OLEDs.     

Highly Efficient Near‐Infrared Delayed Fluorescence Organic Light Emitting Diodes Using a Phenanthrene‐Based Charge‐Transfer Compound

Significant efforts have been made to develop high‐efficiency organic light‐emitting diodes (OLEDs) employing thermally activated delayed fluorescence (TADF) emitters with blue, green, yellow, and orange–red colors. However, efficient TADF materials with colors ranging from red, to deep‐red, to near‐infrared (NIR) have been rarely reported owing to the difficulty in molecular design. Herein, we report the first NIR TADF molecule TPA‐DCPP (TPA=triphenylamine; DCPP=2,3‐dicyanopyrazino phenanthrene) which has a small singlet–triplet splitting (ΔE_ST) of 0.13 eV. Its nondoped OLED device exhibits a maximum external quantum efficiency (EQE) of 2.1 % with a Commission International de L′Éclairage (CIE) coordinate of (0.70, 0.29). Moreover, an extremely high EQE of nearly 10 % with an emission band at λ=668 nm has been achieved in the doped device, which is comparable to the most‐efficient deep‐red/NIR phosphorescent OLEDs with similar electroluminescent spectra.     

Photoprogrammable Organic Light‐Emitting Diodes

Enlightening the memory : The integration of a crosslinkable photochromic dithienylperfluorocyclopentene (DTE) into organic light‐emitting diodes (OLED) allows for the individualization of the emissive area of the OLED device, for example, for signage applications. The operation principle is based on switching the injection barrier for holes (positive charge carriers). Very large ON/OFF ratios of up to 3000 for current as well as electroluminescence have been achieved.

     

A New Approach to Prepare Efficient Blue AIE Emitters for Undoped OLEDs

Two aggregation‐induced emission active luminogens (TPE–pTPA and TPE–mTPA) were successfully synthesized. For comparison, another six similar compounds were prepared. Because of the introduced hole‐dominated triphenylamine (TPA), fluorene groups with high luminous efficiency, and unconjugated linkages, the π conjugation length of the obtained luminogens is effectively restricted to ensure their blue emission. The undoped organic light‐emitting diodes based on TPE–pTPA and TPE–mTPA exhibited blue or deep‐blue emissions, low turn‐on voltages (3 V), and high electroluminescence efficiencies with L_max, η_C,max, and η_P,max values of up to 26 697 cd m^?2, 3.37 cd A^?1, and 2.40 Lm W^?1.     

Electronic Structure Calculations for Hole‐Transporting Triphenylamine Derivatives in Polymer Light‐Emitting Diodes

Hole‐transporting polymers based on polyethene‐triphenylamine derivatives are investigated with respect to their UV/Vis spectra. Two substituents, N‐phenyl‐1‐naphthylamine and carbazole, are examined as their respective polymer light‐emitting diodes (PLEDs) show very different luminous efficiencies. In order to identify the origin of these phenomena electronic structure calculations based on TD‐DFT were performed using monomer models of the hole‐transporting polymers. In experiment these hole‐transporting polymers show very specific differences in their absorption and emission (fluorescence and phosphorescence) spectra. The analysis of the simulated absorption and emission spectra, the MOs as well as the ground and excited state geometries give explanations for the different optical performances of the corresponding PLEDs.

     

Triarylboron‐Based Fluorescent Organic Light‐Emitting Diodes with External Quantum Efficiencies Exceeding 20 %

Triarylboron compounds have attracted much attention, and found wide use as functional materials because of their electron‐accepting properties arising from the vacant p orbitals on the boron atoms. In this study, we design and synthesize new donor–acceptor triarylboron emitters that show thermally activated delayed fluorescence. These emitters display sky‐blue to green emission and high photoluminescence quantum yields of 87–100 % in host matrices. Organic light‐emitting diodes using these emitting molecules as dopants exhibit high external quantum efficiencies of 14.0–22.8 %, which originate from efficient up‐conversion from triplet to singlet states and subsequent efficient radiative decay from singlet to ground states.     

Electrophosphorescent Heterobimetallic Oligometallaynes and Their Applications in Solution‐Processed Organic Light‐Emitting Devices

By combining the iridium(III) ppy‐type complex (Hppy=2‐phenylpyridine) with a square‐planar platinum(II) unit, some novel phosphorescent oligometallaynes bearing dual metal centers (viz. Ir^III and Pt^II) were developed by combining trans‐[Pt(PBu₃)₂Cl₂] with metalloligands of iridium possessing bifunctional pendant acetylene groups. Photophysical and computational studies indicated that the phosphorescent excited states arising from these oligometallaynes can be ascribed to the triplet emissive Ir^III ppy‐type chromophore, owing to the obvious trait (such as the longer phosphorescent lifetime at 77 K) also conferred by the Pt^II center. So, the two different metal centers show a synergistic effect in governing the photophysical behavior of these heterometallic oligometallaynes. The inherent nature of these amorphous materials renders the fabrication of simple solution‐processed doped phosphorescent organic light‐emitting diodes (PHOLEDs) feasible by effectively blocking the close‐packing of the host molecules. Saliently, such a synergistic effect is also important in affording decent device performance for the solution‐processed PHOLEDs. A maximum brightness of 3 356 cd m^?2 (or 2 708 cd m^?2), external quantum efficiency of 0.50 % (or 0.67 %), luminance efficiency of 1.59 cd A^?1 (or 1.55 cd A^?1), and power efficiency of 0.60 Lm W^?1 (or 0.55 Lm W^?1) for the yellow (or orange) phosphorescent PHOLEDs can be obtained. These results show the great potential of these bimetallic emitters for organic light‐emitting diodes.     

Organic Light‐Emitting Diodes Using a Neutral π Radical as Emitter: The Emission from a Doublet

Triplet harvesting is a main challenge in organic light‐emitting devices (OLEDs), because the radiative decay of the triplet is spin‐forbidden. Here, we propose a new kind of OLED, in which an organic open‐shell molecule, (4‐N‐carbazolyl‐2,6‐dichlorophenyl)bis(2,4,6‐trichlorophenyl)methyl (TTM‐1Cz) radical, is used as an emitter, to circumvent the transition problem of triplet. For TTM‐1Cz, there is only one unpaired electron in the highest singly occupied molecular orbital (SOMO). When this electron is excited to the lowest singly unoccupied molecular orbital (SUMO), the SOMO is empty. Thus, transition back of the excited electron to the SOMO is totally spin‐allowed. Spectral analysis showed that electroluminescence of the OLED originated from the electron transition between SUMO and SOMO. The magneto‐electroluminescence measurements revealed that the spin configuration of the excited state of TTM‐1Cz is a doublet. Our results pave a new way to obtain 100 % internal quantum efficiency of OLEDs.     

1,2‐Dihydrophosphete: A Platform for the Molecular Engineering of Electroluminescent Phosphorus Materials for Light‐Emitting Devices

The discovery and molecular engineering of novel electroluminescent materials is still a challenge in optoelectronics. In this work, the development of new π‐conjugated oligomers incorporating a dihydrophosphete skeleton is reported. Variation of the substitution pattern of 1,2‐dihydrophosphete derivatives and chemical modification of their P atoms afford thermally stable derivatives, which are suitable emitters to construct organic light‐emitting diodes (OLEDs). The optical and electrochemical properties of these new P‐based oligomers have been investigated in detail and are supported by DFT calculations. The OLED devices exhibit good performance and current‐independent CIE coordinates.     

Novel Hole‐Transport Material for Efficient Polymer Light‐Emitting Diodes by Photoreaction

Summary: The photo‐crosslinking of carbazole dendrimers was analyzed by UV and IR spectroscopic methods. Photoirradiation results in the formation of a film that is insoluble in toluene and benzene. Time‐of‐flight mass spectrometry studies revealed that the photoirradiation lead to an oligomerization of the dendrimer through crosslinking. The resulting insoluble dendrimer film could be applied as a hole‐transport layer in efficient polymer electroluminescence devices (PLEDs).

Luminance‐voltage characteristics for PLEDs wherein PEDOT:PSS and CbzG3 complex with SnCl₂ were employed as the hole transport layer (ITO/HTL/EML/Ca/Ag).     

Novel Red Phosphorescent Polymers Bearing Both Ambipolar and Functionalized IrIII Phosphorescent Moieties for Highly Efficient Organic Light‐Emitting Diodes

A series of novel red phosphorescent polymers is successfully developed through Suzuki cross‐coupling among ambipolar units, functionalized Ir^III phosphorescent blocks, and fluorene‐based silane moieties. The photophysical and electrochemical investigations indicate not only highly efficient energy‐transfer from the organic segments to the phosphorescent units in the polymer backbone but also the ambipolar character of the copolymers. Benefiting from all these merits, the phosphorescent polymers can furnish organic light‐emitting diodes (OLEDs) with exceptional high electroluminescent (EL) efficiencies with a current efficiency (η _L) of 8.31 cd A⁻¹, external quantum efficiency (η _ext) of 16.07%, and power efficiency (η _P) of 2.95 lm W⁻¹, representing the state‐of‐the‐art electroluminescent performances ever achieved by red phosphorescent polymers. This work here might represent a new pathway to design and synthesize highly efficient phosphorescent polymers.

     

Synthesis of Unsymmetric Bipyridine–PtII–Alkynyl Complexes through Post‐Click Reaction with Emission Enhancement Characteristics and Their Applications as Phosphorescent Organic Light‐Emitting Diodes

Two unsymmetric bipyridine–platinum(II)–alkynyl complexes have been synthesised by a post‐click reaction. These metal complexes are found to exhibit emission enhancement properties. The photoluminescence quantum yield can be significantly increased from 0.03 in solution to 0.72 in solid‐state thin films. Efficient solution‐processable organic light‐emitting diodes have been fabricated by utilizing these complexes as phosphorescent dopants. A high external quantum efficiency of up to 5.8 % has been achieved.     

Synthesis and Characterization of Luminescent Cyclometalated Platinum(II) Complexes of 1,3‐Bis‐Hetero‐Azolylbenzenes with Tunable Color for Applications in Organic Light‐Emitting Devices through Extension of π Conjugation by Variation of the Heteroatom

A series of luminescent cyclometalated platinum(II) complexes of N^C^N ligands [N^C^N=2,6‐bis(benzoxazol‐2′‐yl)benzene (bzoxb), 2,6‐bis(benzothiazol‐2′‐yl)benzene (bzthb), and 2,6‐bis(N‐alkylnaphthoimidazol‐2′‐yl)benzene (naphimb)] has been synthesized and characterized. Two of the platinum(II) complexes have been structurally characterized by X‐ray crystallography. Their electrochemical, electronic absorption, and luminescence properties have been investigated. In dichloromethane solution at room temperature, the cyclometalated N^C^N platinum(II) complexes exhibited rich luminescence with well‐resolved vibronic‐structured emission bands. The emission energies of the complexes are found to be closely related to the electronic properties of the N^C^N ligands. By varying the electronic properties of the cyclometalated ligands, a fine‐tuning of the emission energies can be achieved, as supported by computational studies. Multilayer organic light‐emitting devices have been prepared by utilizing two of these platinum(II) complexes as phosphorescent dopants, in which a saturated yellow emission with Commission International de I′Eclairage coordinates of (0.50, 0.49) was achieved.