Microwave‐Assisted Cross‐Coupling for the Construction of Diaryl Sulfides

The construction of diaryl sulfides through the cross‐coupling of aryl iodides and thiols in microwave heating is described. By using this method, a variety of diaryl sulfides can be prepared in a mild condition and in high yields. Deactivated 4‐nitrothiophenol was effective to afford the product in 94% yield. Sterically hindered ortho‐substituted aryl iodides or thiophenols provided diaryl sulfides effectively by this microwave‐assisted coupling reaction.     

Cellulose‐supported N‐heterocyclic carbene silver complex with pendant ferrocenyl group for diaryl ether synthesis

A cellulose‐supported N‐heterocyclic carbene Ag(I) complex has been synthesized by covalent grafting of ferrocenyl ionic liquid in the matrix of cellulose followed by metallation with silver oxide. The complex was employed as a heterogeneous catalyst in the synthesis of diaryl ethers. Reactions of a variety of phenols with aryl halides afford corresponding diaryl ethers in moderate to good yields. Recyclability experiments were executed successfully for five consecutive runs.     

Ligand‐free copper‐catalysed direct synthesis of diaryl sulfides and diaryl disulfides in wet poly(ethylene glycol)

An improved protocol has been developed for the one‐pot CuI‐catalysed preparation of symmetric diaryl sulfides from their available aryl halides in the presence of thiourea as sulfur transfer agent and in the absence of both ligand and organic solvent. This catalytic system was also used for the high‐yielding preparation of diaryl disulfides in the presence of C₂Cl₆ as oxidant.     

An efficient copper-catalyzed carbon-sulfur bond formation protocol in water

An efficient protocol of copper-catalyzed C-S bond formation between aryl halides and potassium thiocyanate leading to diaryl sulfides is reported. A variety of diaryl sulfides can be synthesized in good to excellent yields up to 94%.     

Palladium‐Catalyzed Amination of Aryl Sulfides with Anilines

A combination of a palladium–NHC catalyst and potassium hexamethyldisilazide enables the amination of aryl sulfides with anilines to afford a wide variety of diarylamines. The reaction conditions are versatile enough for the reaction of even bulky ortho‐substituted aryl sulfides. This amination can be applied to the modular synthesis of N‐aryl carbazoles from the corresponding ortho‐bromothioanisoles. As aryl sulfoxides undergo extended Pummerer reactions to afford ortho‐substituted aryl sulfides, the Pummerer products are thus useful substrates for the amination to culminate in efficient syntheses of a 2‐anilinobenzothiophene and an indole as proof‐of‐principle of the utility of the extended Pummerer reaction/amination cascade.     

Iron‐Catalyzed anti‐Selective Carbosilylation of Internal Alkynes

Reported is the anti ‐selective carbosilylation of internal alkynes with silylborane and alkyl halides using a FeBr₂/DPPE catalyst system. The iron catalyst allows simultaneous introduction of a carbon electrophile and a silicon nucleophile to simple internal alkynes, including diaryl‐, dialkyl‐, and aryl/alkyl‐substituted alkynes, in a highly stereoselective manner. Alkyl halides are applicable as the electrophiles, thereby enabling the synthesis of a variety of tetrasubstituted alkenylsilanes. In addition, syn ‐selective carbosilylation was achieved through stereoswitching, by using a silylborane having oxygen functionality on the silyl group. This novel iron‐catalyzed carbosilylation is a useful tool for expedient synthesis of stereodefined multisubstituted olefins, a fundamental structural motif in organic chemistry.     

Selective Monoarylation of Primary Amines Using the Pd‐PEPPSI‐IPentCl Precatalyst

A single set of reaction conditions for the palladium‐catalyzed amination of a wide variety of (hetero)aryl halides using primary alkyl amines has been developed. By combining the exceptionally high reactivity of the Pd‐PEPPSI‐IPent^Cl catalyst (PEPPSI=pyridine enhanced precatalyst preparation, stabilization, and initiation) with the soluble and nonaggressive sodium salt of BHT (BHT=2,6‐di‐tert‐butyl‐hydroxytoluene), both six‐ and five‐membered (hetero)aryl halides undergo efficient and selective amination.     

Direct N‐Arylation of Azaheterocycles with Aryl Halides under Ligand‐free Condition

A simple and efficient C? N cross‐coupling method of aryl halides with various heterocycles was reported, by using 10 mol% of CuI as catalyst and 1.2 equiv. NaH as base. Aryl iodides, aryl bromides and many substituted aryl chlorides could efficiently react with heterocycles, providing variety of N‐arylated products in good to excellent yields. The ligand‐free catalyst system was stable in air and could be readily reused.     

Synthesis of 2,3‐Diaryl‐3H‐pyrrolo[2,3‐c]pyridin‐3‐ol Derivatives by the Reaction of Aryl(3‐isocyanopyridin‐4‐yl)methanones with Aryl Grignard Reagents

The reaction of aryl(3‐isocyanopyridin‐4‐yl)methanones 1 , easily prepared from commercially available pyridin‐3‐amine, with aryl Grignard reagents gave, after aqueous workup, 2,3‐diaryl‐3H‐pyrrolo[2,3‐c]pyridin‐3‐ols 2 . These rather unstable alcohols were O‐acylated with Ac₂O in pyridine in the presence of a catalytic amount of 4‐(dimethylamino)pyridine (DMAP) to afford the corresponding 2,3‐diaryl‐3H‐pyrrolo[2,3‐c]pyridin‐3‐yl acetates 3 in relatively good yields.     

Csp2–O and C–C Bond Formation via Pd‐Catalyzed Coupling Reaction of 2,4‐Dichloroquinazoline

An efficient palladium‐catalyzed C–O and subsequent C–C bond formation of 2,4‐dichloroquinazoline have been described. The designed strategy results in the synthesis of novel 2‐arylated quinazolin‐4‐ones framework with various aryl/heteroaryl boronic acids in moderate to good yields along with 2,4‐diarylated quinazolines. This methodology offers a direct transformation of aryl halides to aryl alcohols/ketone as well as the straight forward application to generate a wide variety of monoaryl and diaryl quinazoline.     

Facile Synthesis and Palladium‐Catalyzed Cross‐Coupling Reactions of 2,3‐Bis(pinacolatoboryl)‐1,3‐butadiene

Treatment of 1,1‐bis(pinacolatoboryl)ethene with an excess of 1‐bromo‐1‐lithioethene gave 2,3‐bis(pinacolatoboryl)‐1,3‐butadiene in high yield. Palladium‐catalyzed cross‐coupling of the resulting diborylbutadiene with aryl iodides took place smoothly in the presence of a catalytic amount of Pd(OAc)₂/PPh₃ and aqueous KOH to give 2,3‐diaryl‐1,3‐butadienes in good yields. The coupling reaction with commercially available 4‐acetoxyphenylmethyl chloride under the same conditions followed by hydrolysis of the acetyl groups gave anolignan B in a one‐pot manner. A variety of [3]‐ to [6]dendralenes were synthesized by palladium‐catalyzed coupling of the diene or 1,1‐bis(pinacolato)borylethene with alkenyl or dienyl halides, respectively, in good yields.     

Highly Efficient Palladacycle/Dihydroimidazolium Chloride System for the Suzuki‐Miyaura Cross‐Coupling of Aryl Halides (I,Br, Cl) with Arylboronic Acids

A combination of a tertiary amine‐based palladacycle and an N‐heterocyclic carbene ligand precursor ( 1 , N,N‐bis‐mesityl‐4,5‐dihydroimidazolium chloride) has been applied to catalyze the Suzuki‐Miyaura cross‐coupling of aryl halides with arylboronic acids. The substrate scope is general: a variety of electron rich and deficient aryl halides (I, Br, Cl) and arylboronic acids were found to undergo the cross‐coupling reaction in good to excellent yields at low catalyst loading of 0.01–1 mol%.     

Direct synthesis of diaryl sulfides by copper-catalyzed coupling of aryl halides with aminothiourea

An efficient and simple protocol of copper-catalyzed C-S bond formation between aryl halides and inexpensive and commercially available aminothiourea is reported.A variety of symmetrical diaryl sulfides can be synthesized in good to excellent yields up to 94%with the advantage of avoiding foul-smelling thiols.     

Nickel‐Catalyzed Cross‐Coupling Reactions of o‐Carboranyl with Aryl Iodides: Facile Synthesis of 1‐Aryl‐o‐Carboranes and 1,2‐Diaryl‐o‐Carboranes

A nickel‐catalyzed arylation at the carbon center of o‐carborane cages has been developed, thus leading to the preparation of a series of 1‐aryl‐o‐carboranes and 1,2‐diaryl‐o‐carboranes in high yields upon isolation. This method represents the first example of transition metal catalyzed C,C′‐diarylation by cross‐coupling reactions of o‐carboranyl with aryl iodides.     

Heck reactions of aryl halides with alk‐1‐en‐3‐ol derivatives catalysed by a tetraphosphine–palladium complex

cis,cis,cis‐1,2,3,4‐Tetrakis(diphenylphosphinomethyl)cyclopentane–[PdCl(C₃H₅)]₂ efficiently catalyses the Heck reaction of alk‐1‐en‐3‐ol with a variety of aryl halides. In the presence of hex‐1‐en‐3‐ol or oct‐1‐en‐3‐ol, the β‐arylated carbonyl compounds were selectively obtained. Turnover numbers up to 84 000 can be obtained for this reaction. Linalool and 2‐methylbut‐3‐en‐2‐ol led regio‐ and stereoselectively to the corresponding (E)‐1‐arylalk‐1‐en‐3‐ol derivatives. A minor electronic effect of the substituents of the aryl bromide was observed. Quite similar reaction rates were generally observed in the presence of activated aryl bromides such as bromoacetophenone and deactivated aryl bromides such as bromoanisole, indicating that, with these alkenols and this catalyst, the oxidative addition of aryl bromides to palladium is not the rate‐limiting step. It should be noted that this reaction also proceeds with sterically very congested aryl bromides such as 9‐bromoanthracene or 2,4,6‐triisopropylbromobenzene or with a vinyl bromide. On the other hand, low yields were obtained with aryl chlorides. Copyright © 2006 John Wiley & Sons, Ltd.     

Copper‐Catalyzed Reductive N‐Alkylation of Amides with N‐Tosylhydrazones Derived from Ketones

A CuI‐catalyzed reductive coupling of ketone‐derived N‐tosylhydrazones with amides is presented. Under the optimized conditions, an array of N‐tosylhydrazones derived from aryl–alkyl and diaryl ketones could couple effectively with a wide variety of (hetero)aryl as well as aliphatic amides to afford the N‐alkylated amides in high yields. The method represents the very few examples for reliably accessing secondary and tertiary amides through a reductive N‐alkylation protocol.     

Chiral Ammonium Betaine‐Catalyzed Highly Stereoselective Aza‐Henry Reaction of α‐Aryl Nitromethanes with Aromatic N‐Boc Imines

A highly stereoselective aza‐Henry reaction of α‐aryl nitromethanes with aromatic N‐Boc imines was established by using C₁‐symmetric chiral ammonium betaine as a bifunctional organic base catalyst. Various substituted aryl groups for both imines and nitromethanes were tolerated in the reaction, and a series of precursors for the synthesis of unsymmetrical anti‐1,2‐diaryl ethylenediamines was provided.     

Selective Synthesis of 6′‐Arylidene‐1‐aryl‐3‐aryl‐spiro[pyrrolizidine‐2,2′‐cyclohexanone] by Cycloaddition of Azomethine Ylides to Dibenzylidene Cyclohexanone

Azomethine ylides derived in situ from l ‐proline and aryl aldehydes underwent regioselective and stereoselective cycloadditions with diaryl cycloahexanone to form a series of spiro‐pyrrolizidine compounds. By using equimolar proportions of the reactants in DMF, only a single mono‐adduct, namely 6′‐arylidene‐1‐aryl‐3‐aryl‐spiro[pyrrolizidine‐2,2′‐cyclohexanone], was formed, the second double bond in the dipolarophile remaining unaffected. Structure elucidation was achieved by detailed spectroscopic analyses and XRD studies. Interesting solid‐state structural characteristics were revealed by XRD analysis.     

Generation of Aryl(2‐lithiophenyl)methanone O‐Methyl Oximes and Their Use for the Synthesis of N‐(3‐Alkyl‐1‐aryl‐ or 1,3‐diaryl‐1H‐isoindol‐1‐yl)‐O‐methylhydroxylamines via the Reaction with Nitriles

An efficient two‐step procedure for the preparation of a new type of 1H‐isoindoles, i.e., N‐(3‐alkyl‐1‐aryl‐ or 1,3‐diaryl‐1H‐isoindol‐1‐yl)‐O‐methylhydroxylamines 5 , from readily available aryl(2‐bromophenyl)methanones 1 has been developed. Aryl(2‐bromophenyl)methanone O‐methyloximes 2 , derived from the corresponding ketones, were treated with BuLi in Et₂O at 0° to generate novel lithium compounds, aryl(2‐lithiophenyl)methanone O‐methyloximes 3 , which were allowed to react with nitriles to give the desired products 5 in moderate‐to‐fair yields.     

Utilizing 2‐phenylpropanal as coupling partner for C‐S bond formation via sequential thioarylation and decarbonylation process: A novel strategy for the synthesis of aryl alkyl sulfides

In this study, first direct access to aryl alkyl sulfides employing 2‐phenylpropanal as coupling partner is reported. Diaryl disulfides react with this aldehyde in the presence of morpholine and produce the corresponding sulfide products in high yields. In another part, disulfides are in situ generated in the reaction mixture from aryl halides/CuI/Cyanodithioformate and coupled with 2‐phenylpropanal to access aryl alkyl sulfides.