Near Infrared Organic Semiconducting Materials for Bulk Heterojunction and Dye‐Sensitized Solar Cells

Dye sensitized solar cells (DSSCs) and bulk heterojunction (BHJ) solar cells have been the subject of intensive academic interest over the past two decades, and significant commercial effort has been directed towards this area with the vison of developing the next generation of low cost solar cells. Materials development has played a vital role in the dramatic improvement of both DSSC and BHJ solar cell performance in the recent years. Organic conjugated polymers and small molecules that absorb solar light in the visible and near infrared (NIR) regions represent a class of emering materials and show a great potential for the use of different optoelectronic devices such as DSSCs and BHJ solar cells. This account describes the emering class of near infrared (NIR) organic polymers and small molecules having donor and acceptors units, and explores their potential applications in the DSSCs and BHJ solar cells.     

Benzimidazole/Pyridoimidazole‐Based Organic Sensitizers for High‐Performance Dye‐Sensitized Solar Cells

A new series of benzimidazole ( BIm )‐based dyes ( SC32 and SC33 ) and pyridoimidazole‐( PIm ) based dyes ( SC35, SC36N and SC36 ) were synthesized as sensitizers for dye‐sensitized solar cells (DSSCs). The N‐substituent and C‐substituent at the BIm and PIm cores were found to be the dominating factor in determining the electronic properties of the dyes and their DSSCs performance. The efficiency of BIm ‐based dyes ( SC35 and SC36 ) was found to be higher than that of the PIm ‐based dyes ( SC32 and SC33 ) due to better light harvesting. The C‐substituents in SC36 , a 4‐hexylloxybenzene and a hexyl chain, are beneficial to dark current suppression, and hence SC36 achieves the best efficiency of 7.38 % (≈85 % of N719 ). The two BIm dyes have better cell efficiencies than their congeners with a bithiophene entity between the BIm and the anchor due to better light harvesting of the former.     

Tropolone as a High‐Performance Robust Anchoring Group for Dye‐Sensitized Solar Cells

A tropolone group has been employed for the first time as an anchoring group for dye‐sensitized solar cells (DSSCs). The DSSC based on a porphyrin, YD2‐o‐C8T, with a tropolone moiety exhibited a power‐conversion efficiency of 7.7 %, which is only slightly lower than that observed for a reference porphyrin, YD2‐o‐C8 , with a conventional carboxylic group. More importantly, YD2‐o‐C8T was found to be superior to YD2‐o‐C8 with respect to DSSC durability and binding ability to TiO₂. These results unambiguously demonstrate that tropolone is a highly promising dye‐anchoring group for DSSCs in terms of device durability as well as photovoltaic performance.     

New Organic Dye Based on a 3,6‐Disubstituted Carbazole Donor for Efficient Dye‐Sensitized Solar Cells

We have synthesized and characterized four organic dyes ( 9 , 10 , H1 , H2 ) based on a 3,6‐disubstituted carbazole donor as sensitizers in dye‐sensitized solar cells. These dyes have high molar extinction coefficients and energy levels suitable for electron transfer from an electrolyte to nanocrystalline TiO₂ particles. Under standard air mass 1.5 global (AM 1.5 G) solar irradiation, a device using dye H4 exhibits a short‐circuit current density (J_sc) of 13.7 mA cm^?2, an open‐circuit voltage (V_oc) of 0.68 V, a fill factor (FF) of 0.70, and a calculated efficiency of 6.52 %. This performance is comparable to that of a reference cell based on N719 (7.30 %) under the same conditions. After 1000 hours of visible‐light soaking at 60 °C, the overall efficiency remained at 95 % of the initial value.     

Fluorinated Photovoltaic Materials for High‐Performance Organic Solar Cells

Over the past decade, organic solar cells (OSCs) have achieved a dramatic boost in their power conversion efficiencies from about 6 % to over 16 %. In addition to developments in device engineering, innovative photovoltaic materials, especially fluorinated donors and acceptors, have become the dominant factor for improved device performance. This minireview highlights fluorinated photovoltaic materials that enable efficient OSCs. Impressive OSCs have been obtained by developing some important molds of fluorinated donor and acceptor systems. The molecular design strategy and the matching principle of fluorinated donors and acceptors in OSCs are discussed. Finally, a concise summary and outlook are presented for advances in fluorinated materials to realize the practical application of OSCs.     

Molecular Dyads Comprising Metalloporphyrin and Alkynylplatinum(II) Polypyridine Terminal Groups for Use as a Sensitizer in Dye‐Sensitized Solar Cells

A new class of molecular dyads comprising metalloporphyrin‐linked alkynylplatinum(II) polypyridine complexes with carboxylic acids as anchoring groups has been designed and synthesized. These complexes can sensitize nanocrystalline TiO₂ in dye‐sensitized solar cell (DSSC) studies. The photophysical, electrochemical, and luminescence properties of the complexes were studied and their excited‐state properties were investigated by nanosecond transient absorption spectroscopy, with the charge‐separated [Por^.??{(C?C)Pt(tBu₃tpy)}^.+] state observed upon excitation. Excited‐state redox potentials were determined; the electrochemical data supports the capability of the complexes to inject an electron into the conduction band of TiO₂. The complexes sensitize nanocrystalline TiO₂ and exhibited photovoltaic properties, as characterized by current–voltage measurements under illumination of air mass 1.5 G sunlight (100 mWcm^?2). A DSSC based on one of the complexes showed a short‐circuit photocurrent of 10.1 mAcm^?2, an open‐circuit voltage of 0.64 V, and a fill factor of 0.52, giving an overall power conversion efficiency of 3.4 %.     

An Organic Dyad Composed of Diathiafulvalene‐Functionalized Diketopyrrolopyrrole–Fullerene for Single‐Component High‐Efficiency Organic Solar Cells

A new low‐band gap dyad DPP‐Ful, which consists of covalently linked dithiafulvalene‐functionalized diketopyrrolopyrrole as donor and fullerene (C₆₀) as the acceptor, has been designed and synthesized. Organic solar cells were successfully constructed using the DPP‐Ful dyad as an active layer. This system has a record power‐conversion efficiency (PCE) of 2.2 %, which is the highest value when compared to reported single‐component organic solar cells.     

Dye‐Incorporated Polynaphthalenediimide Acceptor for Additive‐Free High‐Performance All‐Polymer Solar Cells

All‐polymer solar cells (all‐PSCs) can offer unique advantages for applications in flexible devices, and naphthalene diimide (NDI)‐based polymer acceptors are the widely used polymer acceptors. However, their power conversion efficiency (PCE) still lags behind that of state‐of‐the‐art polymer solar cells, due to low light absorption, suboptimal energy levels and the strong aggregation of the NDI‐based polymer acceptor. Herein, a rhodanine‐based dye molecule was introduced into the NDI‐based polymer acceptor by simple random copolymerization and showed an improved light absorption coefficient, an up‐shifted lowest unoccupied molecular orbital level and reduced crystallization. Consequently, additive‐free all‐PSCs demonstrated a high PCE of 8.13 %, which is one of the highest performance characteristics reported for all‐PSCs to date. These results indicate that incorporating a dye into the n‐type polymer gives insight into the precise design of high‐performance polymer acceptors for all‐PSCs.     

High‐Performance Dipolar Organic Dyes with an Electron‐Deficient Diphenylquinoxaline Moiety in the π‐Conjugation Framework for Dye‐Sensitized Solar Cells

We report here the synthesis and electrochemical and photophysical properties of a series of easily prepared dipolar organic dyes and their application in dye‐sensitized solar cells (DSSCs). For the six organic dyes, the molecular structures comprised a triphenylamine group as an electron donor, a cyanoacrylic acid as an electron acceptor, and an electron‐deficient diphenylquinoxaline moiety integrated in the π‐conjugated spacer between the electron donor and acceptor moieties. The incorporation of the electron‐deficient diphenylquinoxaline moiety effectively reduces the energy gap of the dyes and broadly extends the spectral coverage. DSSCs based on dye 6 produced the best overall cell performance of 7.35 %, which translates to approximately 79 % of the intrinsic efficiency of the DSSCs based on the standard N719 dye under identical experimental conditions. The high performance of DSSCs based on dye 6 among the six dyes explored is attributed to the combined effects of high dye loading on a TiO₂ surface, rapid dye regeneration, and effective retardation of charge recombination.     

Podlike N‐Doped Carbon Nanotubes Encapsulating FeNi Alloy Nanoparticles: High‐Performance Counter Electrode Materials for Dye‐Sensitized Solar Cells

Podlike nitrogen‐doped carbon nanotubes encapsulating FeNi alloy nanoparticles (Pod(N)‐FeNi) were prepared by the direct pyrolysis of organometallic precursors. Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and Tafel polarization measurements revealed their excellent electrocatalytic activities in the I^?/I₃^? redox reaction of dye‐sensitized solar cells (DSSCs). This is suggested to arise from the modification of the surface electronic properties of the carbon by the encapsulated metal alloy nanoparticles (NPs). Sequential scanning with EIS and CV further showed the high electrochemical stability of the Pod(N)‐FeNi composite. DSSCs with Pod(N)‐FeNi as the counter electrode (CE) presented a power conversion efficiency of 8.82 %, which is superior to that of the control device with sputtered Pt as the CE. The Pod(N)‐FeNi composite thus shows promise as an environmentally friendly, low‐cost, and highly efficient CE material for DSSCs.     

High‐Performance Platinum‐Free Dye‐Sensitized Solar Cells with Molybdenum Disulfide Films as Counter Electrodes

By using a radio‐frequency sputtering method, we synthesized large‐area, uniform, and transparent molybdenum disulfide film electrodes (1, 3, 5, and 7 min) on transparent and conducting fluorine‐doped tin oxide (FTO), as ecofriendly, cost‐effective counter electrodes (CE) for dye‐sensitized solar cells (DSSCs). These CEs were used in place of the routinely used expensive platinum CEs for the catalytic reduction of a triiodide electrolyte. The structure and morphology of the MoS₂ was analyzed by using Raman spectroscopy, X‐ray diffraction, and X‐ray photoemission spectroscopy measurements and the DSSC characteristics were investigated. An unbroken film of MoS₂ was identified on the FTO crystallites from field‐emission scanning electron microscopy. Cyclic voltammetry, electrochemical impedance spectroscopy, and Tafel curve measurements reveal the promise of MoS₂ as a CE with a low charge‐transfer resistance, high electrocatalytic activity, and fast reaction kinetics for the reduction of triiodide to iodide. Finally, an optimized transparent MoS₂ CE, obtained after 5 min synthesis time, showed a high power‐conversion efficiency of 6.0 %, which comparable to the performance obtained with a Pt CE (6.6 %) when used in TiO₂‐based DSCCs, thus signifying the importance of sputtering time on DSSC performance.     

Enhancing the Performance of Dye‐Sensitized Solar Cells with a Gold‐Nanoflowers Box

To improve the electron collection, electron lifetime, and light‐harvesting efficiency of dye‐sensitized solar cells simultaneously, Au nanoflowers were prepared and used to cover the entire TiO₂ film. Deposition of Au nanoflowers around the TiO₂ film formed a light‐scattering “box” that covered the entire TiO₂ film. Compared with a light‐scattering layer that only covers the top surface of TiO₂, the Au‐nanoflowers box exhibited better light‐harvesting efficiency due to omnidirectional light scattering, faster electron transport (attributed to the formation of electron channels between the metallic Au nanoflowers and the electron‐collection electrode), and slower charge recombination. As a consequence, the short‐circuit photocurrent and open‐circuit photovoltage were both enhanced significantly, which improved the power conversion efficiency from 8.12 to 10.91 % (34 %) when an Au‐nanoflowers box was wrapped around the photoanode.     

Transparent Metal Selenide Alloy Counter Electrodes for High‐Efficiency Bifacial Dye‐Sensitized Solar Cells

The exploration of cost‐effective and transparent counter electrodes (CEs) is a persistent objective in the development of bifacial dye‐sensitized solar cells (DSSCs). Transparent counter electrodes based on binary‐alloy metal selenides (M‐Se; M=Co, Ni, Cu, Fe, Ru) are now obtained by a mild, solution‐based method and employed in efficient bifacial DSSCs. Owing to superior charge‐transfer ability for the I^?/I₃^? redox couple, electrocatalytic activity toward I₃^? reduction, and optical transparency, the bifacial DSSCs with CEs consisting of a metal selenide alloy yield front and rear efficiencies of 8.30 % and 4.63 % for Co_0.85Se, 7.85 % and 4.37 % for Ni_0.85Se, 6.43 % and 4.24 % for Cu_0.50Se, 7.64 % and 5.05 % for FeSe, and 9.22 % and 5.90 % for Ru_0.33Se in comparison with 6.18 % and 3.56 % for a cell with an electrode based on pristine platinum, respectively. Moreover, fast activity onset, high multiple start/stop capability, and relatively good stability demonstrate that these new electrodes should find applications in solar panels.     

Adsorption of 4‐tert‐Butylpyridine on TiO2 Surface in Dye‐Sensitized Solar Cells

4‐tert‐Butylpyridine (4‐TBP) has been widely used as additive in dye‐sensitized solar cells (DSC), owing to its improvement of the fill factor and the open circuit voltage of DSC. In this paper, the adsorption of 4‐TBP on the rutile TiO₂(110) surface in DSC was studied by using the density functional theory at DFT/B3LYP level. By comparing the results with those attained from experiments, it was concluded that the 4‐TBP could chemiadsorb on the incompletely covered surface Ti atoms in the electrode. The probable mechanism of compressed recombination by coordinated 4‐TBP in DSC was proposed.     

High Molar Extinction Coefficient Organic Sensitizers for Efficient Dye‐Sensitized Solar Cells

We have designed and synthesized highly efficient organic sensitizers with a planar thienothiophene–vinylene–thienothiophene linker. Under standard global AM 1.5 solar conditions, the JK‐113 ‐sensitized cell gave a short circuit photocurrent density (J_sc) of 17.61 mA cm^?2, an open‐circuit voltage (V_oc) of 0.71 V, and a fill factor (FF) of 72 %, corresponding to an overall conversion efficiency (η) of 9.1 %. The incident monochromatic photo‐to‐current conversion efficiency (IPCE) of JK‐113 exceeds 80 % over the spectral region from 400 to 640 nm, reaching its maximum of 93 % at 475 nm. The band tails off toward 770 nm, contributing to the broad spectral light harvesting. Solar‐cell devices based on the sensitizer JK‐113 in conjunction with a volatile electrolyte and a solvent‐free ionic liquid electrolyte gave high conversion efficiencies of 9.1 % and 7.9 %, respectively. The JK‐113 ‐based solar cell fabricated using a solvent‐free ionic liquid electrolyte showed excellent stability under light soaking at 60 °C for 1000 h.     

Recent Developments in Dye‐Sensitized Solar Cells

The knowledge of dye‐sensitized solar cells (DSCs) has expanded considerably in recent years. They are multiparameter and complex systems that work only if various parameters are tuned simultaneously. This makes it difficult to target to a single parameter to improve the efficiency. There is a wealth of knowledge concerning different DSC structures and characteristics. In this review, the present knowledge and recent achievements are surveyed with emphasis on the more promising cell materials and designs.     

High‐Performance Dye‐Sensitized Solar Cells Based on Phenothiazine Dyes Containing Double Anchors and Thiophene Spacers

A series of new push–pull phenothiazine‐based dyes ( HL1 , HL2 , HL3 , HL4 ) featuring various π spacers (thiophene, 3‐hexylthiophene, 4‐hexyl‐2,2′‐bithiophene) and double acceptors/anchors have been synthesized, characterized, and used as sensitizers for dye‐sensitized solar cells (DSSCs). Among them, the best conversion efficiency (7.31 %) reaches approximately 99 % of the N719‐based (7.38 %) DSSCs fabricated and measured under similar conditions. The dyes with two anchors have more efficient interfacial charge generation and transport compared with their congeners with only single anchor. Incorporation of hexyl chains into the π‐conjugated spacer of these double‐anchoring dyes can efficiently suppress dye aggregation and reduce charge recombination.     

Supramolecular Hemicage Cobalt Mediators for Dye‐Sensitized Solar Cells

A new class of dye‐sensitized solar cells (DSSCs) using the hemicage cobalt‐based mediator [Co(ttb)]^2+/3+ with the highly preorganized hexadentate ligand 5,5′′,5′′′′‐((2,4,6‐triethyl benzene‐1,3,5‐triyl)tris(ethane‐2,1‐diyl))tri‐2,2′‐bipyridine (ttb) has been fully investigated. The performances of DSSCs sensitized with organic D –π–A dyes utilizing either [Co(ttb)]^2+/3+ or the conventional [Co(bpy)₃]^2+/3+ (bpy=2,2′‐bipyridine) redox mediator are comparable under 1000 W m^?2 AM 1.5 G illumination. However, the hemicage complexes exhibit exceptional stability under thermal and light stress. In particular, a 120‐hour continuous light illumination stability test for DSSCs using [Co(ttb)]^2+/3+ resulted in a 10 % increase in the performance, whereas a 40 % decrease in performance was found for [Co(bpy)₃]^2+/3+ electrolyte‐based DSSCs under the same conditions. These results demonstrate the great promise of [Co(ttb)]^2+/3+ complexes as redox mediators for efficient, cost‐effective, large‐scale DSSC devices.