Highly sensitive SERS probe for mercury(II) using cyclodextrin-protected silver nanoparticles functionalized with methimazole

We have developed a surface-enhanced Raman scattering (SERS) probe for the determination of mercury(II) using methimazole-functionalized and cyclodextrin-coated silver nanoparticles (AgNPs). These AgNPs in pH 10 solution containing sodium chloride exhibit strong SERS at 502 cm^?1. Its intensity strongly decreases in the presence of Hg(II). This effect serves as the basis for a new method for the rapid, fast and selective determination of trace Hg(II). The analytical range is from 0.50 μg L^?1 to 150 μg L^?1, and the limit of detection is 0.10 μg L^?1. The influence of 11 metal ions commonly encountered in environmental water samples was found to be quite small. The method was applied to the determination of Hg(II) in spiked water samples and gave recoveries ranging from 98.5 to 105.2 % and with relative standard deviations of <3.5 % (n?=?5). The total analysis time is <10 min for a single sample.

Rapid determination of melamine in milk and milk powder by surface-enhanced Raman spectroscopy and using cyclodextrin-decorated silver nanoparticles

We have synthesized silver nanoparticles (AgNPs) decorated with α-cyclodextrin (CD) by using the traditional silver mirror reaction in the presence of CD. The CD-AgNPs were used as substrate in surface-enhanced Raman spectroscopy (SERS) for determining melamine. The intensity of the Raman band of melamine at 704 cm^?1 was used to determine melamine in milk and milk powder. The use of CD-AgNPs as the SERS substrate rather than classical silver nanoparticles makes the method more sensitive in giving an enhancement by a factor of up to?~?10⁶ in scattering efficiency. The effects of the volume of solutions (of CD-AgNPs, NaCl, NaOH, melamine) and of mixing time were optimized. The standard addition method was employed for quantitative analysis. The correlation coefficient of the calibration plot is 0.9995, and the limit of detection is 3.0 μg L^?1. The method was successfully applied to the determination of melamine in milk and milk powder, with relative standard deviations of <10 % and recoveries between 89 and 104 %.

Synthesis of β‐Cyclodextrin‐2,4‐dihydroxyacetophenone‐phenylhydrazine and Its Application

A novel host reagent of β‐cyclodextrin‐2,4‐dihydroxyacetophenone‐phenylhydrazine(β‐CDP‐DHPH) was synthesized and characterized by IR and ¹H NMR spectra. A highly selective and sensitive spectrofluorimetric determination of trace amounts of cadmium was proposed based on the reaction between Cd²⁺ and β‐CDP‐DHPH at pH 10.0. The molar ratio of β‐CDP‐DHPH to Cd²⁺ was 1:1. The linear range of this method was 0.56‐120 μg·L^?;1 with a detection limit of 0.20 μg·L^?;1. The interferences of 39 common ions in the determination of cadmium were investigated, and the results showed that the host reagent had a quite high selectivity. This method was rapid and simple in determination of trace amounts of cadmium in mineral, tap and river water.     

A Simple and Sensitive Method for the Detection of Trace Pb(II) and Cd(II) based on Nafion‐coated Antimony Film Electrode

Nafion‐coated antimony film electrode (NCAFE) was prepared in situ by simultaneously plated antimony with analytes, and applied to the determination of trace Pb(II) and Cd(II) in non‐deaerated solutions by differential pulse anodic stripping voltammetry (DPASV). Various experimental parameters, which influenced the response of the NCAFE to those metals, were thoroughly optimized and discussed. The results indicated that the sensitivity and resistance to surfactants at the NCAFE were remarkably improved with relative to the antimony film electrode (AFE). In the presence of 5 mg·L^?1 gelatin, the peak heights at the NCAFE showed 4‐fold enhancement for Pb and a 9‐fold enhancement for Cd over a bare AFE. Reproducibility of the sensor was satisfactory, and the relative standard deviations were 4.8% for 20 μg·L^?1 Pb and 3.2% for 25 μg·L^?1 Cd (n=15) with preconcentration time of 180 s. The determination limits (S/N=3) of this sensor were determined to be 0.15 μg·L^?1 for Pb and 0.30 μg·L^?1 for Cd with accumulation time of 300 s. The NCAFE was successfully applied to determining Pb(II) and Cd(II) in vegetable and water samples with satisfactory results.     

Resonance scattering detection of trace melamine using aptamer-modified nanosilver probe as catalyst without separation of its aggregations

Nanosilver was modified by aptamer (ssDNA) to obtain a resonance scattering (RS) probe (AgssDNA) for melamine (MA). Based on the catalytic effect of the probe on the Fehling particle reaction, a nanocatalytic RS assay is proposed for the determination of 0.02-1.06 μg L(-1) MA.     

Spectrophotometric Study of Isoniazid by Using 1,2‐Naphthoquinone‐4‐Sulfonic Acid Sodium as the Chemical Derivative Chromogenic Reagent

A new method for the determination of isoniazid by using 1,2‐naphthoquinone‐4‐sulfonic sodium as the chemical derivative chromogenic reagent is established. The method is based on a condensation reaction to measure the pink compound produced by the reaction of isoniazid with 1,2‐naphthoquinone‐4‐sulfonic sodium in pH 13.00 buffer solution. The stoichiometric ratio of the compound is 1:1, and its maximum absorption wavelength is at 460 nm, ? = 1.18 × 10⁴ L·mol^?1 cm^?1. Beer's law is perfectly obeyed in the range of 0.50?30 μg.mL^?1 of isoniazid. The linear regression equation is A = 0.0185 + 0.11056C (mol.L^?1), with 0.9994 of a linear regression correlation. The detection limit is 0.40 μg.mL^?1, RSD is 0.48%, and average recovery is over 99.3%. This paper further optimizes the determination of isoniazid compared to the previous methods, and the kinetic property and reaction mechanism are studied intensively. This proposed method has been successfully applied to the determination of isoniazid in tablets of isoniazid with satisfactory results.     

Rolling‐Circle Amplification Detection of Thrombin Using Surface‐Enhanced Raman Spectroscopy with Core‐Shell Nanoparticle Probe

An ultrasensitive surface‐enhanced Raman spectroscopy (SERS) sensor based on rolling‐circle amplification (RCA)‐increased “hot‐spot” was developed for the detection of thrombin. The sensor contains a SERS gold nanoparticle@Raman label@SiO₂ core‐shell nanoparticle probe in which the Raman reporter molecules are sandwiched between a gold nanoparticle core and a thin silica shell by a layer‐by‐layer method. Thrombin aptamer sequences were immobilized onto the magnetic beads (MBs) through hybridization with their complementary strand. In the presence of thrombin, the aptamer sequence was released; this allowed the remaining single‐stranded DNA (ssDNA) to act as primer and initiate in situ RCA reaction to produce long ssDNAs. Then, a large number of SERS probes were attached on the long ssDNA templates, causing thousands of SERS probes to be involved in each biomolecular recognition event. This SERS method achieved the detection of thrombin in the range from 1.0×10^?12 to 1.0×10^?8 M and a detection limit of 4.2×10^?13 M , and showed good performance in real serum samples.     

Study on the Interaction between a Novel Ionic Liquid Probe and Anionic Surfactants Using Resonance Light Scattering Spectra and Its Analytical Application

The interaction between anionic surfactants (AS) and 1‐hexadecyl‐3‐methylimidazolium bromide [C₁₆mim]Br was studied by using resonance light scattering (RLS) technique, UV‐Vis spectrophotometry and fluorometric methods. In Britton Robinson (BR) buffer (pH 6.0), [C₁₆mim]Br reacted with AS to form supermolecular complex which resulted in enhancement in RLS intensity. Their maximum RLS wavelengths were all at 390 nm. Some important interacting experimental variables, such as the solution acidity, [C₁₆mim]Br concentration, salt effect and addition order of the reagents, were investigated and optimized. Under the optimum conditions, quantitative determination ranges were 0.001–7 μg·mL^?1 for dodecyl sodium sulfate (SDS), 0.001–6 μg·mL^?1 for sodium dodecylbenzene sulfonate (SDBS) and 0.005–7 μg·mL^?1 for sodium lauryl sulfonate (SLS), respectively, while the detection limits were 1.3 ng·mL^?1 for SDS, 1.0 ng·mL^?1 for SDBS and 5.1 ng·mL^?1 for SLS, respectively. Based on the ion‐association reaction, a highly sensitive, simple and rapid method has been established for the determination of AS.     

Determination of L‐Cystine by a New Sensitive Cucurbit[7]uril/palmatine Probe

In the presence of cucurbit[7]uril (CB[7]), the CB[7] could react with palmatine, which served as a sensitive fluorescence probe, to form host‐guest stable complexes and the fluorescence intensity of the complexes was greatly enhanced. The fluorescence intensity decreased linearly with an increasing number of L‐cystine in the inclusion system. The experimental results show that there exists a competition between L‐cystine and palmatine for the CB[7] hydrophobic cavity and L‐cystine occupies the space of CB[7] cavity, leading palmatine molecules to be forced to reside in the aqueous environment. Based on the fluorescence quenching of the CB[7]/palmatine complexes resulting from complex formation between CB[7] and L‐cystine, a spectrofluorimetric method for the determination of L‐cystine in aqueous solution in the presence of CB[7] was developed. The linear relationship between the corresponding values of the fluorescence quenching ΔF and L‐cystine concentration was obtained in the range of 6.0 to 1.5×10³ ng·mL^?1, with a correlation coefficient (r) of 0.9996. The detection limit was 2.0 ng·mL^?1. The application of the present method to the determination of L‐cystine in tablets gave satisfactory results. This paper also discussed the mechanism of the fluorescence indicator probe.     

Dabsyl chloride derivatisation of melamine followed by high-performance liquid chromatography determination in water samples

A new and sensitive precolumn derivatisation with dabsyl chloride was developed for the analysis of melamine in water samples by high-performance liquid chromatography (HPLC) with visible detection. Derivatisation with dabsyl chloride leads to improving sensitivity and hydrophobicity of melamine. Under optimum conditions of derivatisation and microextraction, the method yielded a linear calibration curve ranging from 10 to 2000 µg L^?1 with a determination coefficient (R²) of 0.9952. Limit of detection (LOD) and limit of quantification (LOQ) were 2.0 and 6.0 µg L^?1, respectively. The relative standard deviation per cent (RSD%) for intraday and inter-day extraction and determination at 20 and 200 µg L^?1 levels of melamine was less than 8.2% (n = 6). Finally, the proposed method was successfully applied for the determination of melamine in different water samples and satisfactory results were obtained (relative recovery ≥91%).     

Determination of Rifampicin by Peroxomonosulfate‐Cobalt(II) Chemiluminescence System

Rifampicin can enhance the chemiluminescence (CL) of peroxomonosulfate‐cobalt(II) system, and the CL intensity is strongly dependent on the rifampicin concentrations. Based on this phenomenon, a rapid and sensitive flow injection CL method was developed for the determination of rifampicin. The relative CL intensity was linear with the rifampicin concentration over the range of 5×10^?8 to 1×10^?6 g·mL^?1 (r=0.9991), the detection limit was 7×10^?9 g·mL^?1 (S/N=3), and the relative standard deviation was 2.7% for 6×10^?7 g·mL^?1 rifampicin (n=11). Furthermore, this method was successfully applied to the determination of rifampicin in real eye drop and capsules sample.     

Highly sensitive electrochemiluminescence “turn-on” aptamer sensor for lead(II) ion based on the formation of a G-quadruplex on a graphene and gold nanoparticles modified electrode

We have developed a “turn on” model of an electrochemiluminescence (ECL) based assay for lead ions. It is based on the formation of a G-quadruplex from an aptamer labeled with quantum dots (QDs) and placed on an electrode modified with of graphene and gold nanoparticles (AuNPs). A hairpin capture probe was labeled with a thiol group at the 5′-end and with an amino group at the 3′-end. It was then self-assembled on the electrode modified with graphene and AuNPs. In the absence of Pb(II), the amino tag on one end of the hairpin probe is close to the surface of the electrode and therefore unable to interact with the QDs because of steric hindrance. The ECL signal is quite weak in this case. If, however, Pb(II) is added, the stem-loop of the aptamer unfolds to form a G-quadruplex. The amino group at the 3′-end will become exposed and can covalently link to a carboxy group on the surface of the CdTe QDs. This leads to strong ECL. Its intensity increases (“turns on”) with the concentration of Pb(II). Such a “turn-on” method does not suffer from the drawbacks of “turn-off” methods. ECL intensity is linearly related to the concentration of Pb(II) in the 10 p mol·L^?1 to 1 n mol·L^?1 range, with a 3.8 p mol·L^?1 detection limit. The sensor exhibits very low detection limits, good selectivity, satisfying stability, and good repeatability.

Study of Spectrophotometric Characteristics of the Charge Transfer Reaction of Aminomethylbenzoic Acid with 7,7,8,8‐Tetracyanoquinodimethane

A new spectrophotometric method was developed for the determination of aminomethylbenzoic acid (PAMBA) using 7,7,8,8‐tetracyanoquinodimethane (TCNQ). The method was based on the formation of charge transfer (CT) complex of this drug as n‐electron donor with the π‐acceptor TCNQ. TCNQ was found to react with PAMBA to produce a kind of yellow complex. The CT reaction proceeded quantitatively in pH 8.5 buffer solution. Different variables affecting the reaction were carefully studied and optimized. Under optimal reaction conditions, the stoichiometric ratio of the reaction, maximum absorption wavelength and the value of molar absorptivity were measured to be 1:1, 425 nm, and 1.9×10⁴ L·mol^?1·cm^?1, respectively. Beer′s law was obeyed in the range of 1–9 µg·mL^?1 of PAMBA. The data have been filled to a linear regression equation A=?0.2612+0.1123c (µg·mL^?1), with a correlation coefficient of 0.9996. The detection limit was 0.4 µg·mL^?1, R.S.D. was less than 1.9%, and average recovery was over 97.6%. The formation of the CT complex was also confirmed by both infrared and ¹H NMR measurements. The thermodynamic property, kinetic property and reaction mechanism have also been discussed. The method developed was applied successfully to the determination of the subject drug in its pharmaceutical dosage forms with good precision and accuracy compared to official method revealed by t‐ and F‐tests.     

Spectrophotometric Determination of Gold in Water and Ore with 2‐Carboxyl‐1‐Naphthalthiorhodanine

Abstract

This paper reports on the synthesis of a new chromogenic reagent, 2‐carboxyl‐1‐naphthalthiorhodanine (CNTR). A high sensitive, selective, and rapid method for the determination of gold based on the rapid reaction of gold with CNTR and the solid phase extraction of the colored chelate with a reversed phase polymer‐based C₁₈ cartridge was developed. In the presence of 0.05–0.5 mol L^?1 of phosphoric acid solution and emulsifier‐OP medium, CNTR reacts with gold to form a red chelate of a molar ratio 1∶3 (gold to CNTR). This chelate was enriched by the solid phase extraction with a polymer‐based C₁₈ cartridge and the retained chelate was eluted from the cartridge with dimethyl formamide (DMF). The enrichment factor of 100 was achieved. In the DMF medium, the molar absorptivity of the chelate is 1.35×10⁵ L · mol^?1 · cm^?1 at 540 nm. Beer's law is obeyed in the range of 0.01～2 µg mL^?1 in the measured solution. The relative standard deviation for 11 replicates sample of 0.5 µg L^?1 level is 2.05%. The detection limit, based on three times the standard deviation is 0.02 µg L^?1 in the original sample. This method was applied to the determination of gold in water and ore with good results.     

Aptamer-modified AuRe Nanoalloy Probe for Trace Hg2+ Using Resonance Scattering as Detection Technique

The AuRe nanoalloy particles in molar ratio of 9:1 were prepared by sodium borohydride procedure, and modified by single strand DNA (ssDNA) to prepare an aptamer AuRe nanoprobe (AuRessDNA) for Hg²⁺. In the pH 7.0 Na₂HPO₄‐NaH₂PO₄ buffer solution and in the presence of NaCl, Hg²⁺ interacted with AuRessDNA to form double‐stranded T‐Hg²⁺‐T mismatched and release AuRe nanoparticles that aggregate to large AuRe nanoparticles clusters causing the resonance scattering (RS) peak red shifting and the RS intensity enhanced linearly. On those grounds, 0.067–33.3 nmol·L^?1 Hg²⁺ can be detected rapidly by the aptamer‐modified AuRe nanoparticles RS assay, with a detection limit of 0.04 nmol·L^?1 Hg²⁺. If the aggregated AuRe particles were removed by membrane filtration, the excess AuRessDNA in the filtration solution exhibits catalytic effect on the new Te particle reaction between Na₂TeO₄ and SnCl₂. As the concentration of Hg²⁺ increased, the AuRessDNA nanoparticles in the filtrate solution decreased, the RS intensity at 734 nm decreased linearly. The Hg²⁺ concentration (c) in the range of 0.00133–0.267 nmol·L^?1 was linear to the decreased RS intensity (ΔI_734nm), with a regression equation of ΔI= ?786.4c?4.4, a correlation coefficient of 0.9975, and a detection limit of 0.9 pmol·L^?1 Hg²⁺. This method was applied to the detection of Hg²⁺ in water samples, with satisfactory results.     

Trace Detection of Mercury(II) Using Gold Ultra‐Microelectrode Arrays

The electroanalytical detection of trace mercury(II) at gold ultra‐microelectrode arrays is reported. The arrays consist of 256 gold microelectrodes of 5 μm in diameter in cubic arrangements which are separated from their nearest neighbor by 100 μm. The array was utilized in nitric acid using linear sweep voltammetry where a linear response from mercury additions over the range 10 μg L^?1?200 μg L^?1 (10^?8?10^?6 M) was observed with a sensitivity and detection limit of 0.11 nC/μg L^?1 and 3.2 μg L^?1 (16 nM) respectively from using a deposition time of 30 s at ?0.2 V (vs. SCE). This methodology was explored in 0.1 and 1 M chloride media over the mercury range 10 μg L^?1?200 μg L^?1 (5×10^?8?10^?6 M) where similar sensitivities of 0.087 nC/μg L^?1 and 0.078 nC/μg L^?1 were observed with an identical detection limit. The protocol is demonstrated to be useful for the determination of mercury for analysis of environmental water samples.     

Synthesis,Bioactivities and Structure Activity Relationship of N‐4‐Methyl‐1,2,3‐thiadiazole‐5‐carbonyl‐N′‐phenyl Ureas

Twenty nine novel N‐4‐methyl‐1,2,3‐thiadiazole‐5‐carbonyl‐N′‐phenyl ureas were designed and synthesized, and their structures were confirmed by proton nuclear magnetic resonance (¹H NMR), infra red spectroscopy (IR) and high‐resolution mass spectroscopy (HRMS). Compounds V‐9 , V‐11 , V‐12 , V‐15 , V‐19 , V‐21 , V‐22 and V‐24 exhibit excellent activity against Culex pipiens pallens. Compounds V‐12 and V‐22 present good insecticidal activity against Plutella xylostella L. Their median lethal concentrations (LC₅₀) are 164.15 and 89.69 mg·L^?1, respectively. Compound V‐11 also has potential wide spectrum of fungicide activity. Its median effective concentrations (EC₅₀) detected from 3.82 µg·mL^?1 against Physalospora piricola to 31.60 µg·mL^?1 against Cercospora arachidicola. Compounds V‐15 and V‐24 show outstanding induction activities as same as positive controls TDL and ningnanmycin, furthermore V‐24 has the highest induction activity of 41.85%±4.43%. To elucidate the structure activity relationship in these compounds, a 3D‐QSAR model has been built. The established model showed a reliable predicting ability with q² values of 0.643 and r² values of 0.982.     

A Novel Chemiluminescence Immunoassay Using Solid‐Phase Antigen for Free 17β‐Estradiol in Human Serum

A high‐performance chemiluminescence immunoassay, with long‐term durability, good precision and time‐saving, was proposed for the detection of free 17β‐estradiol (E₂) in human serum. Ninety‐six microplates were coated with bovine serum albumin conjugated E₂ antigen as solid phase for the immunoassay. The E₂‐BSA antigen coated on the microplate and the E₂ antigen in the sample competed for the binding sites on the horseradish peroxidase (HRP) labeled anti‐E₂ antibody. Chemiluminescence reaction was subsequently carried out by HRP catalyzing luminol‐H₂O₂ substrates, and the chemiluminescence intensity was inversely proportional to the amount of analyte in human sera samples. The concentration of immunoreagents, immunoreaction time, and other relevant variable conditions upon the immunoassay were studied and optimized. The proposed method exhibited detection limit as low as 5.94×10^?3 µg·L^?1 in a linear detection range from 0.01 to 1.00 µg·L^?1, good recoveries between 105% and 108%, and high precision with intra‐ and inter‐assay coefficients between 7.9% and 14.3%.     

[Ru(bpy)2(dcbpy)NHS] Labeling/Aptamer‐Based Biosensor for the Detection of Lysozyme by Increasing Sensitivity with Gold Nanoparticle Amplification

A novel [Ru(bpy)₂(dcbpy)NHS] labeling/aptamer‐based biosensor combined with gold nanoparticle amplification for the determination of lysozyme with an electrochemiluminescence (ECL) method is presented. In this work, an aptamer, an ECL probe, gold nanoparticle amplification, and competition assay are the main protocols employed in ECL detection. With all the protocols used, an original biosensor coupled with an aptamer and [Ru(bpy)₂(dcbpy)NHS] has been prepared. Its high selectivity and sensitivity are the main advantages over other traditional [Ru(bpy)₃]²⁺ biosensors. The electrochemical impedance spectroscopy (EIS) and atomic force microscopy (AFM) characterization illustrate that this biosensor is fabricated successfully. Finally, the biosensor was applied to a displacement assay in different concentrations of lysozyme solution, and an ultrasensitive ECL signal was obtained. The ECL intensity decreased proportionally to the lysozyme concentration over the range 1.0×10^?13–1.0×10^?8 mol L^?1 with a detection limit of 1.0×10^?13 mol L^?1. This strategy for the aptasensor opens a rapid, selective, and sensitive route for the detection of lysozyme and potentially other proteins.     

Study on the Supramolecular Interaction of β-Cyclodextrin with Gemfibrozil by Spectrofluorimetry and Its Analytical Application

The supramolecular interaction of gemfibrozil with β-cyclodextrin （β-CD） was studied by spectrofluorimetry. The mechanism of the inclusion was discussed by spectrofluoremetry, infrared spectrum and ^1H NMR spectrum. The results showed that a 1 ： 1 （β-CD ： gemfibrozil） complex was formed with an apparent association constant of 3.844 × 10^3 L·mol^-1. Based on the enhancement of the fluorescent intensity of gemfibrozil, a spectrofluorimetric method for the determination of gemfibrozil in bulk aqueous solution in the presence of β-CD was developed. The linear range was 3.30 ng·mL^- 1 -6.00 ug·mL^-1 with the detection limit of 0.980 ng·mL^-1. There was no interference from the excipients normally used in tablet composition and the serum main compositions. The proposed method was then successfully applied to the determination of gemfibrozil in capsules and serum.