螯合树脂研究——Ⅺ.一类新的氨基二硫代甲酸型螯合树脂的合成及吸附性能

 本文报道了以多乙烯多胺为主链的巯基胺树脂与二硫化碳反应,合成了四种新型的氨基二硫代甲酸型螯合树脂,这类树脂对贵金属具有高的吸附容量和优良的吸附选择性。并通过红外光谱和X光电子能谱研究树脂及其金属螫合物。     

Regulation of metal ion recognition by allosteric effects in thiacalix[4]crown based receptors

Three new ditopic receptors 3a-c based on thiacalix[4]arene of 1,3 alternate conformation possessing two different complexation sites have been designed and synthesized for both soft and hard metal ions. The imino nitrogens bind soft metal ion (Ag⁺/Pb²⁺/Cu²⁺) and the crown moiety binds K⁺ ion. The preliminary investigations show that 3a-c behave as ditopic receptors for Ag⁺/K⁺, Pb²⁺/K⁺, and Cu²⁺/K⁺ ions, respectively. In all the three receptors it was observed that the formation of 3a·Ag⁺/3b·Pb²⁺/3c·Cu²⁺ complex triggers the decomplexation of K⁺ ion from crown moiety and acts as a gateway, which regulates the binding of alkali metal to crown moiety. Thus, allosteric binding between metal ions ‘switch off’ the recognition ability of crown ether ring.     

Effect of Solvent on Competitive Bulk Membrane Transport of Transition and Post Transition Metal Cations Using Decyl-18-crown-6

A series of competitive metal ion transport experiments have been performed. Each involved transport from an aqueous source phase across an organic membrane phase into an aqueous receiving phase. The source phase contained equimolar concentrations of cobalt(II), nickel(II), cupper(II), zinc(II), cadmium(II), silver(I) and lead(II) metal cations. The membrane phase incorporated ionophore, decyl-18-crown-6. The membrane solvents include: chloroform, dichloromethane, 1,2-dichloroethane, nitrobenzene and chloroform–nitrobenzene binary solvents. A good transport efficiency and selectivity of Pb²⁺ transport from aqueous solutions are observed in this investigation. The selectivity order for competitive bulk liquid membrane transport of the studied transition and post transition metal cations through chloroform is: Pb²⁺>Co²⁺>Ni²⁺>Ag⁺>Cd²⁺, but in the case of dichloromethane, 1,2-dichloroethane and nitrobenzene as liquid membranes, the selectivity sequences were found to be: Pb²⁺>Co²⁺>Cd²⁺>Cu²⁺>Ag⁺>Ni²⁺>Zn²⁺, Pb²⁺>Co²⁺>Ag⁺>Ni²⁺>Zn²⁺ and Pb²⁺>Co²⁺>Ni²⁺>Zn²⁺>Cd²⁺>Ag⁺, respectively. The transport rate of the metal cations in chloroform–nitrobenzene binary solvents is sensitive to the solvent composition. The transport processes were studied in absence and presence of the stearic acid and the results show that the sequence of selectivities and ion transport rates change in the presence of stearic acid.     

Ratiometric and turn-on monitoring for heavy and transition metal ions in aqueous solution with a fluorescent peptide sensor

A novel fluorescent peptide sensor containing tryptophan (donor) and dansyl fluorophore (acceptor) was synthesized for monitoring heavy and transition metal (HTM) ions on the basis of metal ion binding motif (Cys-X-X-X-Cys). The peptide probe successfully exhibited a turn on and ratiometric response for several heavy metal ions such as Hg²⁺, Cd²⁺, Pb²⁺, Zn²⁺, and Ag⁺ in aqueous solution. The enhancements of emission intensity were achieved in the presence of the HTM ions by fluorescent resonance energy transfer (FRET) and chelation enhanced fluorescence (CHEF) effects. The detection limits of the sensor for Cd²⁺, Pb²⁺, Zn²⁺, and Ag⁺ were lower than the EPA's drinking water maximum contaminant levels (MCL). We described the fluorescent enhancement, binding affinity, and detection limit of the peptide probe for HTM ions.     

Azothia- and Azoxythiacrown Ethers as Ion Carriers. Part I. Cationic Response of Membrane Electrodes

13-Membered azothia- and azoxythiacrown ethers have been applied as ion carriers in ion-selective membrane electrodes. Their sensitivity and selectivity were studied towards alkali, alkaline earth, transition and heavy metal cations. It was found that membranes doped with the azoxythiacrown ether (A) show higher affinity towards Pb²⁺ than Cu²⁺ (log K_Cu,Pb ^pot = 1.7), whereas membranes with the azothiacrown ether (B) are more selective towards Cu²⁺ than Pb²⁺ (log K_Cu,Pb ^pot = -2.4). The discrimination of alkali and alkaline earth cations was found to be greater for B than for A. Electrodes with both ionophores suffered from strong interference by Ag⁺ and Hg²⁺. The relation between the carrier structure and electrode properties has been discussed.     

Spectrophotometric study of complexation of dibenzopyridino-18-crown-6 with some transition and post-transition metal ions in DMSO solution using murexide as a metallochromic ligand

The complexation reaction of dibenzopyridino-18-crown-6 (DBPY 18C6) with Co²⁺, Cu²⁺, Zn²⁺, Pb²⁺, Cd²⁺, Hg²⁺, and Ag⁺ have been studied in DMSO at 25°C by the spectrophotometric method. Murexide was used as a competitive colored ligand. The stoichiometry of metal ion-murexide and metal ions with DBPY18C6 complexes were estimated by mole ratio and continuous variation methods and emphasized by the KINFIT program. The stoichiometry of all the complexes was found to be 1: 1 (metal ion/ligand). The order of stability constants for the obtained metal ion-murexide complexes (1: 1) varies in the order Cu²⁺ > Cd²⁺ > Co²⁺ ∼ Pb²⁺ > Zn²⁺ > Ag⁺ > Hg²⁺. This trend shows that the transition metal ions clearly obey the Irving-Williams role. For the post-transition metal ions, the ionic radius and soft-hard behavior was the major affects in varying of this order. The dibenzopyridino-18-crown-6 complexes with the used metal ions vary as Ag⁺ > Pb²⁺ > Cu²⁺ > Cd²⁺ > Hg²⁺ > Zn²⁺ > Co²⁺. The article is published in the original.     

Chromogenic azole diazothiacrown ethers

Azocrown ethers with sulphur atoms and pyrrole or imidazole residue as a part of macrocycle have been synthesised. Their metal complexation abilities in acetonitrile were studied using UV–vis spectrophotometry. The largest spectral changes were observed for both pyrrole- and imidazole-azothiacrown ethers on complexation with Pb^2 + , Cu^2 + , Zn^2 + , Ni^2 + , Co^2 +  and Ag⁺ ions. In the case of alkali and alkaline earth metal ions no spectral changes were found. Preliminary studies of ion-selective membrane electrodes with synthesised ionophores are presented. In the measurement for transition/heavy metal cations, only copper and lead give high responses. X-ray structure of 18-membered pyrrole azothiacrown ether is described.     

Competitive Potentiometric Study of the Thermodynamics of Complexation of Some Transition and Heavy Metal Ions with Dibenzopyridino-18-crown-6 in Methanol using Ag+ Ion as a Probe

The complexation of dibenzopyridino-18-crown-6 with some transition and heavy metal ions in methanol solution at various temperatures was studied by a competitive potentiometric method using a Ag⁺/Agelectrode system. The stoichiometry and stability of the resulting complexes were computed by the MINIQUAD program. The stability of the resulting complexes varied in the order Ag⁺ > Pb²⁺ > Tl⁺ > Cu²⁺ > Cd²⁺ > Zn²⁺. The enthalpy and entropy of the resulting 1:1 complexeswere evaluated from the temperature dependence of the stability constants.The complexes of all cations were enthalpy-stabilized but entropy-destabilized,except for Ag⁺ and Pb²⁺ ions,which were also entropy-stabilized.     

Synthesis of a Dithiocarbamate Chelate Resin and Its Oxidized form and Their Adsorption Properties for Heavy Metal Ions

A series of macroporous dithiocarbamate chelate resins, III and V, and an oxidized resin, VI, with high adsorption capacity were prepared. The influence of various reaction conditions of amination, dithiocarboxylation, and oxidation were examined. The structure and the conversion of functional groups of resins were confirmed by IR spectra and elemental analysis. The adsorption capacities of Resin II for Hg²⁺, Cu²⁺, Zn²⁺, and Cd²⁺ are 4.40, 2.44, 1.77, and 1.36 mmol/g, respectively. The adsorption capacities of Resins V and VI for Cu²⁺. Zn²⁺, Ni²⁺, Co³⁺, Ag⁺, Hg²⁺, Cd²⁺, Pb²⁺, and Au³⁺ are 4.07–0.51 and 3.81–0.59 meq ion/g, respectively. The adsorption rate and the influence of pH on the adsorption percentage of the resins for metal ions were examined. Noble metal, transitional metal, and heavy metal ions can be quantitatively adsorbed by the resins. The adsorbed Cu²⁺, Pb²⁺, Cd²⁺, Co³⁺, and Ni²⁺ can be quantitatively eluted with 5N HNO₃, and the presence of large amounts of Ca²⁺, Mg²⁺, Fe³⁺, and Al³⁺ did not interfere.     

Copper(II) ion sensor based on electropolymerized undoped conducting polymers

A solid state copper(II) ion sensor is reported based on the application of electropolymerized undoped (neutral) polycarbazole (PCz) and polyindole (PIn) modified electrodes. The new sensor shows high selectivity to Cu²⁺ ions with a detection limit of 10^–5 M. PCz and PIn are formed respectively by the anodic oxidation of 50 mM carbazole and 5 mM indole monomers in dichloromethane containing 0.1 M tetrabutylammonium perchlorate on a platinum electrode using a single compartment cell. Potentiostatic polymerization of both the monomers are carried out at 1.3 V and 1.0 V vs. Ag/AgCl, respectively. Perchlorate ions were electrochemically removed from the polymer films by applying – 0.2 V vs. Ag/AgCl. Polymer-coated electrodes are incubated in 1 M KCl solution for 8 h followed by incubation in distilled water for 2 h before using as a metal ion sensor. The undoped PCz and PIn electrodes were found to be highly selective and sensitive for Cu²⁺ ions with little selectivity for Pb²⁺ and negligible response towards Ag⁺, Hg²⁺, Cu⁺, Ni²⁺, Co²⁺, Fe²⁺, Fe³⁺ or Zn²⁺. Potentiometric responses for Cu²⁺ ions are recorded for both the sensor electrodes together with a double-junction Ag/AgCl reference electrode. Calibration curves for Cu²⁺ are reported for both ion sensors. The polymer-modified electrodes were found to be stable for several weeks. Electronic Publication     

Simultaneous separation and extraction of Ag(I), Pb(II) and Pd(II) ions by solid phase method and determination of these ions by flame atomic absorption spectrometry

A simultaneous preconcentration and separation method for determination of trace amount of dissolved Ag⁺, Pb²⁺ and Pd²⁺ ions by modified octadecyl silica membrane disks with DBzDA18C6 was developed. The adsorbed metal complexes were eluted from disk with 10?mL of 4?M KCl and determined by flame atomic absorption spectroscopy. Several parameters such as anion effect, pH of sample solution, type of eluent, amount of ligand, sample and elution flow rate were evaluated. The effect of diverse ions on preconcentration was also investigated. A precocentration factor of 110 can easily be achieved depending on the volume of the sample. For 100?mL of the solution the linear dynamic rang were found to be 30–1000, 140–6000, 60–900?μg?l^?1 for Ag⁺, Pb²⁺ and Pd²⁺, respectively. Based on three standard deviation of the blank the detection limit was obtained as 1.8, 8.0 and 4.2?μg?L^?1 for Ag⁺, Pb²⁺, Pd²⁺, respectively. The formation constants of Ag⁺ and Pb²⁺ ions with DBzDA18C6 at 25?°C were determined from the molar conductance–mole ratio data. This method was applied for the determination of Ag⁺, Pb²⁺ and Pd²⁺ in environmental water, tea and soil samples.     

A chelating resin with bis[2-(2-benzothiazolylthioethyl)sulfoxide]: Synthesis, characterization and properties for the removal of trace heavy metal ion in water samples

A new chelating resin containing bis[2-(2-benzothiazolylthioethyl)sulfoxide] was synthesized using chloromethylated polystyrene as material and characterized by elemental analysis and infrared spectra. The adsorption capacities of the newly formed resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, Pb²⁺, Mn²⁺, Ni²⁺, Cd²⁺ and Fe³⁺ were investigated over the pH range 1.0-6.0. The resin exhibited no affinity for alkali or alkaline earth metal ions. The maximum adsorption capacities of the resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, Pb²⁺, Mn²⁺, Ni²⁺, Cd²⁺ and Fe³⁺ were 1.49, 0.96, 0.58, 0.11, 0.37, 0, 0.24, 0.36 and 0.25 mmol g⁻¹, respectively. In column operation it had been observed that Hg²⁺ and Ag⁺ in trace quantity could be separated from different binary mixtures and Hg²⁺ could be effectively removed from industrial wastewater and the natural water spiked with Hg²⁺ at usual pH.     

Synthesis and metal extraction behavior of pyridine and 1,2,4-triazole substituted calix[4]arenes

Three series of heterocycle substituted calixarenes, derivatized at lower and upper rim, were synthesized and successfully evaluated for metal extraction towards alkali, alkaline, transition and heavy metal ions. The presence and placement of sulfur, heterocycle functionality at upper/lower rim played a crucial role toward the extractability and selectivity of metal ions. The lower rim substituted calixarenes have shown high extractability and poor selectivity. In contrast to this, upper rim substituted calixarenes exhibited good selectivity. Moreover, sulfur functionalized calixarenes have shown better selectivity for heavy metal ions than alkali and alkaline metal ions. Among upper rim substituted calixarenes, 17 and 18 were found to be suitable for Na⁺, K⁺ and Ag⁺, 19,13 for heavy metal ions i.e., Pb²⁺, Hg⁺, Hg²⁺ and Ag⁺, and 11,12 for Pb²⁺ and Ag⁺ only.     

Synthesis, coordination properties, and analytical applications of mixed donor macrocycles containing the 1,10-phenanthroline sub-unit

The coordination properties towards different metal ions of a new class of mixed N/S-, and N/S/O-donor macrocycles containing the 1,10-phenanthroline sub-unit in the cyclic framework are reviewed. The conformational constraints imposed by the heteroaromatic fragment onto the aliphatic portion of the ring determine the coordination mode of these ligands which can stabilise low-valent Ni⁺, Pd⁺, Pt⁺, and Rh⁺ metal complexes. Structural and thermodynamic aspects of the coordination chemistry of these ligands are considered together with possible applications as building blocks in the synthesis of multi-centred systems, and as template in the construction of extended polyiodide networks. However, solution studies demonstrate the inability of these ligands to work as selective and specific fluorescent chemosensors for heavy transition and post-transition metal ions and the formation constants evaluated for the formation of 1:1 complexes with Pb²⁺, Cd²⁺, Hg²⁺, Cu²⁺, and Ag⁺ in acetonitrile are of the same order of magnitude. Nevertheless, some of these macrocyles are extremely effective to recognise Cu²⁺ or Ag⁺ over the other metal ions in transport processes, and have been successfully used as neutral ionophore in the construction of PVC-based ionselective electrodes and supported liquid membranes for analytical detection and separation, respectively, of these metal ions.     

Determination of Inorganic and Organic Thiophosphates with Ion-Selective Membrane Electrodes

Abstract

The conditions for the determination of sodium thiophosphate and sodium S-(2-amino-ethyl)-thiophos-phate in the presence of phosphate ion using ion-selective membrane electrodes are described. Both thiophosphates (inorganic and organic) are hydrolyzed in acidic medium. The phosphate ion is determined with Pb(II) using a Pb²⁺ – selective membrane electrode.

Cysteamine is determined by potentiometric titration with Hg(I1) using a Ag⁺/S^2? – crystal membrane electrode or by direct potentiometry with a Cu²⁺ selective membrane electrode. The results were verified by the iodination method.     

Heavy metal complexation by N-acyl(thio)urea-functionalized cavitands: synthesis, extraction and potentiometric studies

The synthesis and binding properties of resorcinarene-based cavitands functionalized with N-acylthiourea moieties towards different cations are described. Extraction studies with metal (Pb²⁺, Cu²⁺, Ag⁺, Hg²⁺, Cd²⁺, Eu³⁺, Fe³⁺, K⁺, Na⁺, and Ca²⁺) picrates and the incorporation in ion selective electrodes (ISEs), show that there is more than a 40% increase of the Ag⁺ extraction for N-acylthiourea ionophores (2, 3, and 8) in comparison with N-benzoyl-N′-benzylthiourea (9). Ionophore 8, which has a C₃ chain between the platform and the ionophore, extracts two times more Cu²⁺ than the more rigid one (2). Stoichiometry studies showed for ligand 2 a ligand/metal ratio of 1:1, while for model compound 9 a ratio of 1:2 was found. Potentiometric studies of electrodes revealed that cavitands 2, 3, and 8 induce a significantly different selectivity pattern compared to the cation-exchanger used, as well as model compound 9. Especially, a considerable enhancement of the selectivity towards Ag⁺ and Pb²⁺ over K⁺, Ca²⁺, and Na²⁺ ions was observed.     

Tétraazamacrocycles lipophiles: Extraction d'ions métalliques par une résine imprégnée

Lipophilic Tetraazamacrocyles: Extraction of Metal Ions by Impregnated Resin Extraction of Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺ and Ag⁺ by lipophilic tetraazamacrocycles dispersed on a solid matrix (Amberlite XAD7) is reported. Extraction efficiency is sensitive to the metal ion identity and the cavity size of the macrocycle. The influence of kinetic factors upon extraction efficiency is discussed.     

Highly efficient and selective membrane transport of silver(I) using 15-crown-5 as a selective ion carrier

Selective transport of Ag⁺ cation through a nitrobenzene bulk liquid membrane with 15-crown-5 as an efficient carrier was studied. The maximum transport value of 88.02 ± 0.78% was observed for Ag⁺ ion after 8 h at Ag⁺ concentration of 4 × 10^?4 M. The selectivity and efficiency of Ag⁺ cation transport from aqueous solutions containing equimolar amounts of Cr³⁺, Co²⁺, Ni²⁺, Zn²⁺, Cd²⁺, and Pb²⁺ cations were also investigated.     

The selectivity of active carbons modified by fullerenes with respect to mixtures of metal cations in aqueous solutions

The separating ability of active carbons and active carbons modified with fullerenes with respect to mixtures of nonferrous metal cations was studied. The selectivity series for the extraction of cations from aqueous solutions was Ag⁺ > Cu²⁺ > Pb²⁺. The selectivity of adsorption by active carbon modified with fullerenes was higher than that characteristic of the initial adsorbent, especially for the extraction of silver ions from a mixture of silver and copper cations.     

Removal of some heavy metals and fungicides from aqueous solutions using nano-hydroxyapatite,nano-bentonite and nanocomposite

A batch adsorption experiments were carried out to study the role of nanoparticles and nanocomposite on removal of some heavy metals and fungicides from aqueous solution. Nano-Hydroxyapatite (n-HAP), Nano-Bentonite (n-Bo) and Bentonite-hydroxyapatite nanocomposite (B-HAP NC) evaluated for the removal of some heavy metals and fungicides. The nanoparticles and nanocomposite were characterized by TEM, SEM and AFM, X-ray powder diffraction (XRD) and BET surface area. The batch adsorption was done using nanoparticles with Pb²⁺ and Ni²⁺ as example of heavy metals with concentrations up to 25 mgL⁻¹. Also, the adsorption experiment was conducted using nano-particles (n-HAP, n-Bo and B-HAP NC) with fungicides Stop Feng and Eurozole with concentrations 20 to 200 μg L⁻¹. Langmuir and Freundlich isotherm equations were employed to study the adsorption. The adsorption kinetics were conducted metal ion (Pb²⁺ and Ni²⁺) with residence time. The results indicated the maximum adsorption capacity of Ni⁺² was occurred on (n-HAP). While that maximum adsorption capacity of Pb²⁺ was occurred on (B-HAP NC). The rate of Ni⁺² removal was found to be very rapid during the initial 60 min. The adsorption of Pb⁺² by the n-HAP and (B-HAP NC) was a slow increase with time, it did not bring any remarkable effect. Also, the efficiency of adsorbent compounds used to remove the residue of fungicides Stop Feng and Eurozole shown the highest removal rates obtained with used nano-hydroxyapatite followed by bentonite-hydroxyapatitenanocomposite and nano-bentonite, respectively. The current results are very useful in the treatment of wastewater and the removal of heavy metals and fungicides, consequently making them suitable for agricultural purposes.