Spectrophotometric determination of chlorhexidine with bromocresol green by flow-injection and manual methods

A spectrophotometric study of the chlorhexidine/bromocresol green/Triton X-100 system is reported; at pH 5.3, both 2:1 and 1:1 bromocresol green/chlorhexidine complexes are formed. In the manual spectrophotometric method, Beer's law is obeyed for chlorhexidine concentrations of 2.9–32.2 μg ml^?1 (r.s.d. 0.4–1.3%); the molar absorptivity is 12 500 l mol^?1 cm^?1. In the flow-injection method, the calibration graph is linear for the chlorhexidine range 23.0–83.9 μg ml^?1 (r.s.d. 0.8%); the injection is ca. 60 h^?1. Benzocaine, acetylsalicylic acid, ascorbic acid and sucrose are tolerated at 10^?2?10^?3 M levels. Hibitane 5% was analyzed successfully.     

Spectrophotometric determination of osmium with phthalimide dithiosemicarbazone by means of complex formation and catalytic reactions

Phthalimide dithiosemicarbazone forms a 1:1 complex with osmium at pH 3.3–4.5 (?₄₅₀ = 1.3 · 10⁴ l mol^?1 cm^?1 ) which is applied to the photometric determination of osmium; Beer's law is obeyed for the range 1–12 μg Os ml^?1. The oxidation of the reagent with cerium(IV) is catalyzed by osmium(VIII), and this reaction allows a more sensitive procedure for the determination of osmium; the calibration curve is linear over the range 0.05–0.4 μg Os ml^?1. The interferences in both procedures are described.     

Spectrophotometric determination of trace amounts of beryllium using 1,8-dihydroxyanthrone as a new chromogenic reagent

A simple, rapid, and sensitive spectrophotometric method for the trace level determination of beryllium based on the formation of a 1:2 complex with anthralin (1,8-dihydroxyanthrone) as a new reagent is developed. A spectrophotometric method was used to determine the acidity constant and stepwise proton dissociation of the reagent. The experimental conditions for determining beryllium including the influences of pH, reagent concentration and time were evaluated and optimized. Under the optimum experimental conditions, the molar absorptivity of the complex is 0.47 × 10⁴ l mol^?1 cm^?1 at 545 nm. Calibration graph was linear in the range of 0.04–1.04 μg ml^?1 with a detection limit of 0.012 μg ml^?1 and a %RSD of 0.43%, for 5 replicate determinations at 0.48 μg ml^?1 of Be(II). The interferring effect of some cations and anions was also studied. The method was applied for the determination of beryllium in beryl, silicate rock and alloys. Ethylenediaminetetraacetic acid (EDTA) was used for masking interfering ions.     

Spectrophotometric determination of iron(III) with EDTA tetrahydrazide

The tetrahydrazide of ethylenediamine tetraacetic acid (NH₂NH)₄-EDTA was synthesized from the EDTA ester and hydrazine hydrate in ethanolic solution, the resulting (NH₂NH)₄-EDTA being recrystallized in 60% ethanol. When the spectrophotometric study of the iron(III) (NH₂NH)₄-EDTA complex in aqueous solution was made two absorption maxima at 530 and 450 nm at pH 4.5 and 11.0, respectively, were found. Beer's law is obeyed in the range 1.0–20.0 μg Fe(III) ml^?1 at 530 nm and pH 4.5 and 0.5–12.0 μg Fe(III) ml^?1 at 450 nm and pH 11.0, the molar absorptivities being 1.95 × 10³ 1 mol^?1 cm^?1 at 530 nm and 3.35 × 10³ 1 mol^?1 cm^?1 at 450 nm, respectively. The Ringbom optimal interval falls between about 3 and 18 μg Fe(III) ml^?1 at 530 nm and about 2–14 μg Fe(III) ml^?1 at 450 nm. The reaction between the metal and the ligand was also investigated. The method has been successfully applied to the determination of iron in talcs.     

Extraction—Spectrophotometric determination of nickel with 2-hydroxy-1-naphthaldoxime

A method for the solvent extraction—spectrophotometric determination of nickel with 2-hydroxyl-1-naphthaldoxime (HNA) has been studied. The method is based upon the formation of a nickel—HNA complex which is extracted into chloroform from an aqueous solution of pH 5.8. The nickel—HNA complex in chloroform exhibits an absorption maximum at 410 nm with molar absorptivity of 8.1 × 10³ liters mol^?1 cm^?1. Beer's law is applicable in the range from 5 to 50 μg of nickel. The mole ratio of the complex and effect of interfering ions are described.     

Batch and flow-injection determination of ethylenediamine in pharmaceutical preparations

the ethylenediamine/pyridine-2-carbaldehyde/copper(I) system is used in a new spectrophotometric method for the determination of ethylenediamine. The batch procedure involves the formation of an orange chelate between the Schiff's base and copper(I) ions at pH 8.5 (borate buffer) and measurement of the absorbances at 475 nm against water after 10/2-15 min; Beer's law is obeyed over the range 0.5/2-11.2 μg ml^?1 and the molar absorptivity is 6.21 × 10³ l mol^?1 cm^?1. Tolerance limits for different amines [36] and other organic compounds [12] are reported. In the optimized flow-injection system, ethylenediamine (1.4/2-84.6 μg ml^?1 is determined at a sample throughput of 55 h^?1. The method is sensitive and selective and is satisfactory for the determination of the diamine in aminophylline and pharmaceutical preparations (ethylenediamine contents from 0.031 to 3.23%) with relative errors ranging from ?7.4 to +11.1% and relative standard deviations of about 0.65% for both procedures.     

A highly sensitive spectrophotometric determination of gallium with chromal blue G in the presence of cetyltrimethylammonium chloride

A new spectrophotometric method for the determination of gallium with chromal blue G in the presence of cetyltrimethylammonium chloride is described. The sensitivity of color reaction between gallium and chromal blue G is greatly increased by the sensitizing action of cetyltrimethylammonium chloride. The gallium complex has maximal absorbance at 662 nm and pH 6.2–6.8. Beer's law is obeyed over the range 0.04–0.6 ppm of gallium. The molar absorptivity of the complex is 1.44 × 10⁵ liters mol^?1 cm^?1 at 662 nm, and the spectrophotometric sensitivity is 4.8 × 10^?4 μg Ga cm^?2. The mole ratio of gallium and chromal blue G in the complex is estimated to be 1:4. The formation constant and effect of interfering ions are described.     

Spectrophotometric study of the reaction of bismuth with bromopyrogallol red in the presence of tensides: The determination of bismuth and EDTA

The formation of the complex between bismuth and bromopyrogallol red in the presence of cationogenic tensides CPB or Septonex was studied. Optimal conditions for this reaction were found and a new spectrophotometric method was developed for determining bismuth in the concentration range 0.2–5.5 μg · ml^?1. On the basis of the reaction of Bi with EDTA, a new method was developed for the indirect determination of EDTA in the concentration range 0.2–6.0 μg · ml^?1.     

Spectrophotometric determination of copper with α, β, γ, δ-tetraphenylporphine trisulfonate

Water-soluble porphyrin, α, β, γ, δ-tetraphenylphorphine trisulfonate (TPPS, H₂R), was found to be a very useful agent for both the direct spectrophotometric determination and the photometric titration of copper(II). The molar absorptivity of H₄R²⁺ at 434 nm is 5.0·10⁵ and the spectrophotometric sensitivity is 0.00013 μg Cu cm^?2 for A=0.001. Beer's law is followed in the range 0.006 μg–0.06 μg Cu ml^?1. Among twenty-two elements examined, only zinc(II) seriously interfered. Acid dissociation constants and salt effects on the spectra of TPPS were evaluated.     

Spectrophotometric determination of platinum with substituted pyrimidine-2-thiol

The yellow complex of Pt(IV) with 1-pyridyl-4,4,6-trimethyl-1H,4H-pyrimidine-2-thiol (PyTPT) which has maximum absorbance at 430 nm, is studied for the spectrophotometric determination of the metal. Molar absorptivity is 5000 liters mol^?1 cm^?1 and Sandell's sensitivity is 0.039 μg/cm². The determination of Pt(IV) (2.8–8.4 ppm) in the presence of diverse ions is described.     

Spectrophotometric Assay of Certain Aminoglycosides Using Cyanoacetamide

Abstract

A simple and sensitive ultraviolet spectrophotometric method has been devised for the determination of amikacin, kanamycin, neomycin and streptomycin in pure form and in some pharmaceutical preparations. The method depends on the nitrosation of the primary amino groups followed by reaction with cyanoacetamide in ammonia medium at 100°C for 30 min, The reaction products exhibit a characteristic absorption. maximum at 270 nm. Beer's law is obeyed within the concentration ranges 4–40 μg ml^?1 for amikacin, kanamycin and neomycin and 8–80 μg ml^?1 for streptomycin with apparent molar absorptivities of about 1.85 × 10⁴ for the first three compounds and 1.3×10⁴ 1. mole^?1.cm^?1 for streptomycin.     

Spectrophotometric determination of vanadium using variamine blue and its application to synthetic, environmental and biological samples

A simple, rapid and accurate spectrophotometric method is described for the determination of trace amounts of vanadium using variamine blue (VB) as a chromogenic reagent. The method is based on the oxidation of variamine blue to form a violetcolored species on reaction with vanadium(V), having an absorption maximum at 570 nm. Beer’s law is obeyed in the range of 0.1–2.0 μg ml^?1. The molar absorptivity and Sandell’s sensitivity were found to be 1.65 × 10⁴ l mol^?1 cm^?1 and 0.003 μg cm^?2, respectively. Optimum reaction conditions were evaluated in order to delimit the linear range. The effect of interfering ions on the determination is described. The proposed method has been successfully applied to the determination of vanadium in steel, pharmaceutical, environmental, and biological samples.     

A rapid method for the spectrophotometric determination of palladium(II) and osmium(VIII)

Propionyl promazine phosphate is proposed as a new reagent for the rapid spectrophotometric determination of microgram amounts of Pd(II) and Os(VII). PPP instantaneously forms an orange-red 1:1 complex with Pd(II) in sodium acetate-hydrochloric acid buffer of pH 0.8 to 4.0 at room temperature. The reagent also forms an orange-red radical cation with Os(VIII) in 0.5 to 2.0 M hydrochloric acid. The Pd-PPP complex exhibits an absorption maximum at 490–500 nm with molar absorptivity of 7.1 × 10³ liter mol^?1 cm^?1. The Os-PPP radical cation has an absorption maximum at 505–515 nm with molar absorptivity of 2.21 × 10⁴ liters mol^?1 cm^?1. The Sandell sensitivity is 0.022 μg/cm² (Pd) and 0.008 μg/ cm² (Os). Beer's law is valid over the concentration range 0.2 to 21 ppm (Pd) and 0.2 to 4.2 ppm (Os). The proposed method offers the advantages of simplicity, rapidity, and without the need for heating or extraction. The reagent is used for the determination of Pd in the synthetic mixtures corresponding to Pd alloys used in jewelery and Os in osmiridium alloy.     

Utility of p-chloranilic Acid and 2,3 Dichloro-5,6-dicyano p-Benzoquinone (DDQ) for the Spectrophotometric Determination of Triamterene

Abstract

Two simple and sensitive spectrophotometric procedures are suggested for analysis of triamterene. The first procedure is based on the reaction of triamterene with p-chloranilic acid (p-CA) in methylene chloride to form a highly stable coloured product, exhibiting maximum absorbance at λ 530 nm. Beer's law is obeyed in the range of 40–220 μg.ml^?1 with a mean percentage accuracy of 99.98 ± 0.446. Limit of determination is 20 μg.ml^?1. In the second procedure, the drug is determined via charge transfer complex formation with 2,3 dichloro-5,6-dicyano p-benzoquinone (DDQ) using methylene chloride as a solvent. Here the reaction product has two well defined maxima at 460 nm and 530 nm where each has been utilized for quantitative determination. Beer's law is obeyed in concentration ranges of 25–125 μg.ml^?1 and 25–150 μg.ml^?1 with mean percentage accuracies of 99.92 ± 0.449 and 100.00 ± 0.511 for both maxima. 460 and 530 nm. respectively. Limit of determination is 12.5 μg.ml^?1 at both maxima. Optimum conditions for each procedure have been studied and the stoichiometry of both reactions was ascertained using Job's method of continuous variation. The validity of the suggested procedures was assessed by applying the standard addition technique using the drug capsules. Both procedures are statistically analyzed as compared with BP method for analysis of triamterene (non aqueous titration) revealing good accuracy and precision as indicated by t and F tests.     

Spectrophotometric and First Derivative Spectrophotometric Determination of Magnesium with 1-Hydroxy-2-Carboxyanthraquinone

Abstract

1-Hydroxy-2-carboxyanthraquinone reacts with magnesium in ethanol-water mixtures to form a red complex having an absorption maximum at 490 nm in alkaline medium. A detailed study of the characteristics of this complex has been carried out and a spectrophotometric method for the determination of magnesium at the 0.4–4.0 μg ml^?1 level is proposed. The method has been sensitized by employing first derivative spectrophotometry. By the use of the derivative approach magnesium can be determined between 0.08–0.40 μg ml^?1. Statistical analysis of the results is also described.     

Diazotized reagent for spectrophotometric determination of glyphosate pesticide in environmental and agricultural samples

A new sensitive spectrophotometric method for the determination of glyphosate herbicide in environmental and agricultural samples is developed. The reaction is based on diazotization followed by coupling of glyphosate with p-dimethyl amino benzaldehyde. The resulted complex absorption spectra was observed at λ_max = 420 nm. The effects of other metal ions and pesticides were also tested for selective determination of glyphosate. The analytical parameters were optimized and have been successfully applied for determination of glyphosate in various environmental samples such as soil, water and vegetables. This method has a lower limit detection of 6 μg of glyphosate. Beer's law is obeyed over the concentration range of 6.0 μg–24.0 μg glyphosate in 25 mL of the final solution at 420 nm. The standard deviation and relative standard deviation calculated are 0.0055 and 1.023, respectively. The molar absorptivity of the colored system is 1.91 × 10¹⁰ L mol^?1cm^?1 and Sandell's sensitivity is found 0.408 × 10^?5 μg cm^?2. The proposed method is simple, sensitive, highly reproducible and time saving as compare to those complicated time consuming methods.     

Solvent extraction and spectrophotometric determination of titanium(IV) with 3-phenyl-3-methyl-2-mercaptopropenoic acid

The distribution equilibria of 3-phenyl-3-methyl-2-mercaptopropenoic acid (PhMMP) and the titanium(IV)-PhMMP complex have been studied. An extraction-photometric method for the determination of microamounts of titanium has been developed. We have investigated the influence of pH, the reagent, and the presence of electrolytes and masking agents in the aqueous phase on the equilibrium. From the slope analysis of the distribution curves the composition of the extracted species has been found to be Ti(OH)₂(HR)₂. The complex is extracted quantitatively. Beer's Law is followed over the range 0.09–3.74 μg ml^?1 of titanium(IV), the molar absorptivity is 1.65 × 10⁴ liters mol^?1 cm^?1, and the Sandell sensitivity is 2.8 ng cm^?2 at 439 nm. This method has been applied to the determination of titanium in a bauxite.     

Spectrophotometric determination of molybdenum as a mixed thiocyanate-monooctyl α-anilinobenzylphosphonate complex

A sensitive method for the spectrophotometric determination of molybdenum is described. Molybdenum is reduced with ascorbic acid in hydrochloric acid solution, and complexed with thiocyanate ions, and the complex formed is extracted with monooctyl α-anilinobenzylphosphonate (MOABP) in chloroform. The molar absorptivity of the method is 5858 l mole^-1 cm^-1 at 470 nm. Beer's law is obeyed in the range 0.7–28 μg Mo ml^-1. Few metals interfere; the separation of the interfering elements is discussed. The composition of the extracted complex is Mo(SCN)₅·3 MOABP.     

Spectrophotometric determination of cobalt(II) based on the ion-pair of tetrathiocyanatocobaltate(II) with neotetrazolium chloride

The ion-pair formed between tetrathiocyanatocobaltate(II) and [3,3′-(4,4′- biphenylene)bis(2,5-diphenyl)]-2H-tetrazolium chloride (neotetrazolium chloride) can be extracted into 4-methylpentan-2-one and used for the spectrophotometric determination of cobalt (2.5–9.8 μg ml^?1) at pH 3.5–5.0. The Sandell sensitivity of the method is 0.02 μg Co cm^?2. With suitabte masking, the method is quite selective and is applicable to nickel wire alloys.     

Spectrophotometric Determination of Manganese with 4(5)-Imidazolealdoxime (Imalox)

Abstract

A method is described for the spectrophotometric determination of manganese by means of its complex with 4(5)-imidazolealdoxime, IMALOX, formed in alkaline medium. The colour system has its absorption maximum at 350 nm and obeys Beer's law over the range 0.8–8.0 μg of Mn per ml. The optimum range is 1–5 μg m^?1. The molar absorptivity is 7850 1 mol^?1 cm^?1. Relatively few ions interfere, and these can be masked with cyanide, tartrate and NTA. The experimental results have been critically analyzed and a comparison with the main spectrophotometric reagents for manganese is presented.