Mittels der Ston-Flow-Methode mit der Quecksilbertropfelektrode untersuchte Reaktionen Fe(III)+V(III)=V(IV)+ Fe(II) und V(II) +V(IV)=2V(III)

Ohne Zusammenfassung     

Ditolyldithiophosphato derivatives of phosphorus(III) and phosphorus(V)

O,O′-Ditolylphosphorodithioates of phosphorus(III), [(o-, m-, or p-CH₃C₆H₄O)₂PS₂] _n PCl_3−n , and phosphorus(V), [(o-, m-, or p-CH₃C₆H₄O)₂-PS₂] _n POCl_3−n , (n = 1, 2, and 3) were isolated as colorless viscous liquids by the reaction of PCl₃ and POCl₃ with sodium ditolylphosphorodithioate, (o-, m-, or p-CH₃C₆H₄O)₂PS₂Na, in 1:1, 1:2, and 1:3 molar ratios in toluene. These compounds were characterized by elemental analyses, molecular weight measurements, IR, and NMR (¹H, ³¹P, and ¹³C) spectroscopic studies, which indicated a less common monodentate linkage of dithiophosphate moieties in both phosphorus(III) and phosphorus(V) derivatives leading to a tetrahedral geometry around the phosphorus atom. Correspondence: Sushil K. Pandey, Department of Chemistry, University of Jammu, Baba Saheb Ambedkar Road, Jammu 180 006 (J & K), India.     

Ditolyldithiophosphato derivatives of phosphorus(III) and phosphorus(V)

O,O′-Ditolylphosphorodithioates of phosphorus(III), [(o-, m-, or p-CH₃C₆H₄O)₂PS₂] _n PCl_3−n , and phosphorus(V), [(o-, m-, or p-CH₃C₆H₄O)₂-PS₂] _n POCl_3−n , (n = 1, 2, and 3) were isolated as colorless viscous liquids by the reaction of PCl₃ and POCl₃ with sodium ditolylphosphorodithioate, (o-, m-, or p-CH₃C₆H₄O)₂PS₂Na, in 1:1, 1:2, and 1:3 molar ratios in toluene. These compounds were characterized by elemental analyses, molecular weight measurements, IR, and NMR (¹H, ³¹P, and ¹³C) spectroscopic studies, which indicated a less common monodentate linkage of dithiophosphate moieties in both phosphorus(III) and phosphorus(V) derivatives leading to a tetrahedral geometry around the phosphorus atom.     

On the chelation of stannate (IV), antimonate(V) and tellurate(VI) anions with cyclic and acyclic hexols

Conductimetric, potentiometric and titrimetric studies of aqueous telluric acid at pH 4.8–11.0 in the presence of acyclic hexols show that whereas only 1 : 1 complexes are formed at low pH, 1 : 3 polyol-tellurates exist only in strongly alkaline media. The 1 : 2 chelates behave as transient intermediates. Cyclohexols exclusively form 1 : 1 complexes with stannate(IV), antimonate(V) and tellurate(VI) oxyanions, even at extreme pH conditions.     

Some fluorinated heterocyclic and acyclic derivatives of chlorocarbonylsulfenyl chloride

For the first time, fluorinated oxathialones, polyfluoroalkylchlorothioformates, chlorocarbonylpolyfluoroalkylsulfenate esters, a chlorocarbonylhexafluoroisopropylidenimino sulfenate, and a 5-tri-fluoromethyl-2-oxo-1,3,4-oxathiazole were synthesized by reacting chlorocarbonylsulfenyl chloride with R_fC(O)CH₂C(O)R′ (R_f = CF₃; R'= CF₃, OC₂H₅), R_fO^-Li⁺ (R_f = CF₃CH₂, (CF₃)₂C=N^-Li⁺ and CF₃C(O)NH₂. Perfluorosuccinic acid and mercury(II) trifluoroacetate with ClC(O)SCI gave their respective anhydrides.     

Mass spectra of partially fluorinated β-diketonato complexes of Al(III), Cr(III), Fe(III) and Co(III)

The mass spectra of the Al(III), Cr(III), Fe(III) and Co(III) complexes of the anions of hexafluoroacetylacetone (hfac) trifluoroacetylacetone (ttac), benzoyltrifluoroacetone (btac) and thenoyltrifluoroacetone (ttac) have been determined and are discussed here. Emphasis is placed on discerning which of the observed reactions may properly be attributed to the influence of the metal in the complex and those which may be thought of as arising from the nature of the ligand. The most important influence of the coordinated metal is related to its ability to be reduced²; however, the presence of the metal serves to prohibit or facilitate certain rearrangement reactions relative to the free protonated ligand. Since essentially all fragmentation occurs within or by loss of a ligand, the nature of the ligand determines the nature of the observed fragments. Where intramolecular com-petition of fragment types is possible (tfac, btac and ttac complexes), the most probable fragment of a given class, odd electron or even electron, is easily determined. The most commonly eliminated fragments are CF₃and CF₂. Certain metastable peaks are associated with consecutive decomposition in the field free region. Such a phenomenon appears to be common for molecules of the type studied here.     

Copper(II) bromide complexes with acyclic and cyclic pyrimidine-containing phane ligands

Complexes of copper(II) bromide with cyclic and isostructural acyclic phane ligands containing derivatives of pyrimidine nucleobases (cytosine and uracil) were synthesized and characterized. In two cyclic pyrimidinophanes used, the macrocycles included two 6-methylthiocytosine and one 6-methyluracil units linked by polymethylene chains (L³) and two 6-methyluracil units linked by N-containing bridges (L⁵). Ligand L³ and its isostructural acyclic analogs are coordinated by the Cu²⁺ ion through the same donor sites (the ring N atoms of the thiocytosine units). The coordination polyhedra of the Cu atom in complexes with cyclic and acyclic ligands are different. Ligand L⁵ and its isostructural acyclic analog also form copper(II) complexes with different coordination polyhedra involving different donor sites. The acyclic ligand is coordinated by the Cu²⁺ ion via the bridging N atom, while cyclic ligand L⁵, via the uracil CO groups (the bridging N atoms become protonated). The resulting complexes are dielectrics.     

Catalytic-enthalpimetric determination of sulphur(II) compounds in non-aqueous Media

The direct injection enthalpimetry was applied to the determination of sulphides, thiourea, dithiocarbamates, dithizone and benzothiazole by means of catalytic iodine-azide reaction in non-aqueous media. The determined compounds are injected into the iodine-azide solution in dimethylformamide, dimethylsulphoxide, formamide and into the mixture of these solvents. The catalytic reaction takes place immediately on injection of the samples and terminates within 2 min. The rise in temperature is monitored with a thermistor in a Wheatstone bridge circuit and the curve resistance change-time was the basis for the calculation of investigated concentration of sulphur catalysts.     

Kinetic studies on the reduction of a nickel (III) oxime-imine complex by sulphur(IV) and selenium(IV)

The kinetics of the reduction of [Ni^III(L¹)]²⁺ (where HL¹ = 15-amino-3-methyl-4,7,10,13-tetraazapentadec-3-en-2-one oxime) by sulphur(IV) and selenium (IV) over the regions pH 2.50–8.02 and 2.01–4.00 respectively have been investigated at 30°C. Attempts were made to evaluate the reactivity of all the reacting species, of sulphur(IV) and selenium(IV) by considering suitable pH ranges. The oxidation of SC₂·H₂O and HSO ₃ ⁻ is proposed to proceed through the formation of a hydrogen-bonded adduct. The reaction with SO ₃ ²⁻ seems to follow a direct outer-sphere route which is well supported by Marcus crossrelation calculation. The oxidation of HSeO _l3 ⁻ is ≈ 10³ times slower than that of H₂SeO₃. The kinetic data indicate that the oxidation of sulphur(IV) by [Ni^IIIL¹)]²⁺ is much more favourable as compared to the corresponding oxidation of selenium(IV).     

Mass spectra of some partially fluorinated aliphatic compounds

The mass spectra of several fluorohydrocarbons are shown and discussed. The fragmentation of these compounds displays a close correlation with the molecular structure and points to the importance of the charge-stabilisation concept for the ion intensities. The iodo-derivatives show a large abundant molecular ion.     

Vanadium (III), oxovanadium (IV) and oxovanadium (V) trifluoro-methanesulfonates

V(SO₃CF₃)₃, VO(SO₃CF₃)₂ and VO(SO₃CF₃)₃ have been prepared by reacting V(O₂CCF₃)₃, VO(O₂CCF₃)₂ and VOC1₃ with HSO₃CF₃. The i.r. data suggest a bridging bidentate nature for SO₃CF₃ groups. The diffuse reflectance spectrum of V(SO₃CF₃)₃ suggests hexacoordination of vanadium, whilst that of VO(SO₃CF₃)₂ is comparable to either five or six coordinated oxovanadium (IV) systems. The magnetic moments of V(SO₃CF₃)₃ and VO(SO₃CF₃)₂ are slightly lower than the spin-only values. Thermal decomposition of these triflates is simple. All the three triflates form coordination complexes with pyridine, 2, 2′-bipyridyl and triphenylphosphine oxide.     

Iridium(III) catalyzed oxidation of cyclic ketones by cerium(IV)

IrCl₃which is considered to be a sluggish catalyst in alkaline media, was found to surpass the catalytic efficiency of even osmium and ruthenium in acidic media in the oxidation of cyclopentanone and 2-methylcyclohexanone by cerium(IV) sulphate in aqueous sulphuric acid medium. It was observed that the order of the reaction shows direct proportionality with respect to low concentrations of the oxidant and alcohols, but tends to become independent of concentration at higher concentrations. On increasing the concentrations of externally added Cl^-, H⁺ and Ce^IIIions, the rate of the reaction decreases sharply initially but the decrease in rate becomes less prominent as their concentration is increased. The rate of reaction is directly proportional with respect to IrCl₃concentrations. Kinetic data suggest that the production of Ce^III ion occurs before the rate-determining step. Parameters such as the energy of activation, free energy of activation and entropy data collected at five different temperatures suggest that cyclopentanone forms the activated complex more easily.     

Complexes of Ge(IV)- and Sn(IV)-fluorides with cyclic and acyclic carbenes: bis(dialkylamino)-difluoromethylenes as carbene sources

Carbene complexes of Ge(IV)- and Sn(IV)-fluorides have been synthesized by oxidative addition of 2,2-difluoro-1,3-dimethylimidazolidine and bis(dimethylamino)difluoromethane to GeCl(2)?dioxane and SnF(2). Chloride analogs of the Ge(IV) complexes were also isolated. All compounds were characterized in the solid state by single-crystal X-ray diffraction.     

Polyvalent perfluoroorgano- and selected polyfluoroorgano-halogen(III and V) compounds

This review compiles important aspects of the chemistry of polyvalent perfluoroorganohalogen(III and V) compounds of the last three decades and reports on distinctions which are worth mentioning in comparison with non-fluorinated polyvalent organohalogen(III and V) analogues. Besides general synthetic paths to neutral (R_FHalX₂, (R_F)₂IX, (R_F)₃I, and R_FHalX₄), cationic ([R_F(R′)Hal]Y and [R_F(R′)HalF₂]Y), and anionic (M[R_FHalX₃] and M[(R_F)₂HalX₂]) derivatives of iodine and bromine, transformations at the halogen centre of those polyvalent compounds and selected applications and their use as reagents are referred. Trends of ¹⁹F and ¹³C NMR spectroscopic properties of prototypes of polyvalent perfluoroorgano-iodine and -bromine compounds are compiled and interpreted. Structural features of characteristic perfluoroalkyl-, pentafluorophenyliodine(III and V), and few -bromine(III) compounds are presented and compared.     

Lanthanide compounds with fluorinated OC6F5 ligands: homo- and heterovalent complexes of Eu(II) and Eu(III)

The fluorinated phenoxide OC6F5 forms the stable Eu(II) and Eu(III) derivatives (DME)2Eu(mu-OC6F5)3Eu(mu-OC6F5)3Eu(DME)2 and (DME)2Eu(OC6F5)3, as well as the heterovalent product (DME)2Eu(mu-OC6F5)3Eu(DME)(OC6F5)2, in redox reactions of Eu with HOC6F5 or in proton-transfer reactions of HOC6F5 with Eu(SPh)2. The divalent complex crystallizes as a trimer with three bridging phenoxides bridging each pair of metals, with the terminal metals coordinating DME and the central metal ion encapsulated totally by O(C6F5) and dative fluoride interactions. The trivalent compound is monomeric with terminal phenoxide ligands and no Eu-F interactions. The heterovalent compound has clearly localized metal valence states and coordination features that mimic the homovalent species with the terminal OC6F5 bound to the Eu(III) ion, three bridging OR ligands spanning the Eu(II) and Eu(III) ions, and dative Eu(II)-F bonds. At elevated temperatures, these compounds decompose to give a mixture of solid-state fluoride phases.     

Titrimetric determination of U(iv) alone and in mixtures with V(IV), Mn(II), Ce(III) and Fe(II)

Summary A rapid and accurate method is described for the potentiometric determination of uranium(IV) with permanganate at room temperature using trace amounts of ortho-phosphoric acid as a catalyst. The procedure has been extended for the differential potentiometric determination of mixtures with vanadium, manganese or cerium. The methods are easy, non-time consuming and free from interference by a large number of foreign ions. Conditions are also developed for the differential photometric determination of uranium and iron in mixtures.Based on these procedures, a differential titrimetric procedure has been developed for determination of iron(III), vanadium(V), chromium(VI) and manganese(VII) [or cerium(IV)] in a single solution at room temperature. This procedure has also been tested on Bureau of Standard samples.

---

Titrimetrische Bestimmung von U(IV) allein und in Mischungen mit V(IV), Mn(II), Ce(III) und Fe(II)Anwendung auf die Analyse von Stählen und Legierungen

Zusammenfassung Eine schnelle und genaue Methode wird beschrieben zur potentiometrischen Bestimmung von Uran(IV) mit Permanganat bei Raumtemperatur unter Verwendung von Spuren Orthophosphorsäure als Katalysator. Das Verfahren wurde auf die differentialpotentiometrische Bestimmung im Gemisch mit V, Mn und Ce ausgedehnt. Die rasch und einfach ausführbare Methode wird durch zahlreiche Fremdionen nicht gestört. Eine differentialphotometrische Bestimmung von U(IV) und Fe(II) im Gemisch wird ebenfalls angegeben, außerdem eine differentialtitrimetrische Bestimmung von Fe(III), V(V), Cr(VI), Mn(VII) [oder Ce(IV)] in einer Lösung. Anwendungsbeispiele für Stähle und Legierungen werden beschrieben.