Synthesis of arborescent polystyrene by “click” grafting

A method was developed for the synthesis of arborescent polystyrene by “click” coupling. Acetylene functionalities were introduced on linear polystyrene (M_n = 5300 g/mol, M_w/M_n = 1.05) by acetylation and reaction with potassium hydroxide, 18‐crown‐6 and propargyl bromide in toluene. Polymerization of styrene with 6‐tert‐butyldimethylsiloxyhexyllithium yielded polystyrene (M_n = 5200 g/mol, M_w/M_n = 1.09) with a protected hydroxyl chain end. Deprotection, followed by conversions to tosyl and azide functionalities, provided the side chain material. Coupling with CuBr and N,N,N′,N″,N″‐pentamethyldiethylenetriamine proceeded in up to 94% yield. Repetition of the grafting cycles led to well‐defined (M_w/M_n ≤ 1.1) polymers of generations G1 and G2 in 84% and 60% yield, respectively, with M_n and branching functionalities reaching 2.8 × 10⁶ g/mol and 460, respectively, for the G2 polymer. Coupling longer (M_n = 45,000 g/mol) side chains with acetylene‐functionalized substrates was also examined. For a linear substrate, a G0 polymer with M_n = 4.6 × 10⁵ g/mol and M_w/M_n = 1.10 was obtained in 87% yield; coupling with the G0 (M_n = 52,000 g/mol) substrate produced a G1 polymer (M_n = 1.4×10⁶ g/mol, M_w/M_n = 1.38) in 28% yield. The complementary approach using azide‐functionalized substrates and acetylene‐terminated side chains was also investigated, but proceeded in lower yield. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1730–1740     

Synthesis of anionic carbosilane dendrimers via “click chemistry” and their antiviral properties against HIV

The synthesis and characterization of four families of anionic carbosilane dendrimers bearing carboxylate, phosphonate, naphthylsulfonate, and sulfate terminal groups prepared by cycloaddition of azide–alkyne catalyzed by copper (CuAAC) are presented here. For the preparation of these anionic carbosilane dendrimers, two strategies starting from azide‐terminated carbosilane dendrimers were followed: (i) click coupling of neutral alkynes followed by derivatization into anionic moieties or (ii) click coupling of anionic alkynes. Both strategies require different reaction conditions in order to accommodate the different substrate polarities. These anionic dendrimers, in general, do not present cell toxicity in vitro until concentration up to 20 µM. Therefore, they can be used in inhibition experiments in concentrations below this limit. We have observed that dendrimers bearing phosphonate groups possess poor anti‐HIV capabilities in vitro in PBMCs, while carboxylate dendrimers can reduce HIV infection levels moderately. On the other hand, sulfate and naphthylsulfonate dendrimers are powerful anti‐HIV agents and their antiviral activity is generation and concentration dependent. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1099–1112     

Dendronized Triangular Oligo(phenylene ethynylene) Amphiphiles: Nanofibrillar Self‐Assembly and Dye Encapsulation

Triangular‐shaped oligo(phenylene ethynylene) amphiphiles 1 a and 1 b decorated in their periphery with two‐ and four‐branched hydrophilic triethyleneglycol dendron wedges, have been synthesized and their self‐assembling properties in solution and onto surfaces investigated. The steric demand produced by the dendritic substituents induces a face‐to‐face rotated π stacking of the aromatic moieties. Studies on the concentration and temperature dependence confirm this mechanism and provide binding constants of 1.2×10⁵ and 1.7×10⁵ M ^?1 in acetonitrile for 1 a and 1 b , respectively. Dynamic and static light scattering measurements complement the study of the self‐assembly in solution and demonstrate the formation of rod‐like supramolecular structures in aqueous solution. The nanofibers formed in solution can be efficiently transferred onto surfaces. Thus, TEM images reveal the presence of strands of various thickness, with the most common being several micrometers long and with diameters of around 70 nm. Some of these nanofibers present folded edges that are indicative of their ribbon‐like nature. Interestingly, compound 1 b can also form thick filaments with a rope‐like appearance, which points to a chiral arrangement of the fibers. AFM images under highly diluted conditions also reveal long fibers with height profiles that fit well with the molecular dimensions calculated for both amphiphiles. Finally, we have demonstrated the intercalation of the hydrophobic dye Disperse Orange 3 within the filaments and its subsequent release upon increasing the temperature.     

Synthesis,purification, and characterization of “perfect” star polymers via “Click” coupling

The copper (I)‐catalyzed azide‐alkyne cycloaddition “click” reaction was successfully applied to prepare well‐defined 3, 6, and 12‐arms polystyrene and polyethylene glycol stars. This study focused particularly on making “perfect” star polymers with an exact number of arms, as well as developing techniques for their purification. Various methods of characterization confirmed the star polymers high purity, and the structural uniformity of the generated star polymers. In particular, matrix‐assisted laser desorption ionization‐time‐of‐flight mass spectrometry revealed the quantitative transformation of the end groups on the linear polymer precursors and confirmed their quantitative coupling to the dendritic cores to yield star polymers with an exact number of arms. In addition to preparing well‐defined polystyrene and poly(ethylene glycol)homopolymer stars, this technique was also successfully applied to amphiphilic, PCL‐b‐PEG star polymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and Characterization of Cross‐Linked Poly(p‐phenylene ethynylene)s

Summary: Conjugated poly(p‐phenylene ethynylene) networks with interesting optoelectronic properties were synthesized by the palladium‐catalyzed polycondensation of 2,5‐diiodo‐4‐[(2‐ethylhexyl)oxy]methoxybenzene, and 1,4‐diethynyl‐2,5‐bis‐(octyloxy)benzene, with 1,2,4‐tribromobenzene as cross‐linker. The cross‐linker concentration was varied and materials with different cross‐link densities were prepared. The materials were processed into films by simultaneous polymerization and shaping. An alternative approach is to synthesize these cross‐linked polymers in the form of spherical particles, which can be processed from dispersions.

Schematic representation of the cross‐linking process.     

Discrete macromolecular constructs via the Diels–Alder “Click” reaction

Functional polymeric materials with desired properties can be designed by precise control of macromolecular architectures. Over the recent years, click reactions have enabled efficient synthesis of a variety of polymers with different topologies via efficient polymer–polymer conjugations. While the copper catalyzed Huisgen type (3+2) dipolar cycloaddition between azide and alkyne has been widely used toward this goal, the Diels–Alder (DA) reaction offers an alternative click reaction that allow efficient macromolecular conjugations, oftentimes without the need of any additional reagent or catalyst. This article highlights, with illustrative examples, the power of the DA “click” reaction to efficiently synthesize a variety of different well‐defined macromolecular constructs in a modular fashion. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Diels–Alder “Click” Chemistry in Designing Dendritic Macromolecules

Simple, versatile and green : Diels–Alder “click” chemistry is a simple, versatile and “greener” approach in the design of a diverse range of dendritic macromolecules (see scheme).

     

Synthesis of pyrene end‐capped A6 dendrimer and star polymer with phosphazene core via “click chemistry”

Novel hexa‐armed and pyrene (Pyr) end‐capped phosphazene dendrimer [N₃P₃‐(Pyr)₆] and star polymer with poly(ε‐caprolactone) (PCL) arms [N₃P₃‐(PCL‐Pyr)₆] were prepared via two series of reactions. In these series, core‐first approach was used starting from a hexa‐hydroxy functional phosphazene derivative (N₃P₃‐(OH)₆). It was used as an initiator in the ring‐opening polymerization of ε‐caprolactone to prepare a hexa‐armed PCL star polymer (N₃P₃‐(PCL‐OH)₆). Hydroxyl functionalities of N₃P₃‐(OH)₆ and N₃P₃‐(PCL‐OH)₆ were then successfully converted into bromide and azide, in turn. Further end‐group modifications of azide functional dendrimer precursor (N₃P₃‐(N₃)₆) and star polymer (N₃P₃‐(PCL‐N₃)₆) were achieved quantitatively via the Cu(I) catalyzed click reaction between azide functional groups and 1‐ethynyl pyrene in the final step. Moreover, the pyrene end‐capped phosphazene dendrimer and star polymer were used in noncovalent functionalization of multiwalled carbon nanotubes. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of dendrimers through divergent iterative thio‐bromo “Click” chemistry

The development of a novel nucleophilic thio‐bromo “Click” reaction, specifically base‐mediated thioetherification of thioglycerol with α‐bromoesters, is reported. Combination of this thio‐bromo click reaction with subsequent acylation with 2‐bromopropionyl bromide provides an iterative two‐step divergent growth approach to the synthesis of a new class of poly(thioglycerol‐2‐propionate) (PTP) dendrimers. This approach is demonstrated in the rapid preparation of four generation (G1–G4) of PTP dendrimers with high‐structural fidelity. The isolated G1–G4 bromide‐terminated dendrimers can be used directly as dendritic macroinitiators for the synthesis of star‐polymers via SET‐LRP. Additionally, the intermediate hydroxy‐terminated dendrimers are analogs of other water‐soluble polyester and polyether dendrimers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3931–3939, 2009     

含二茂铁齐聚苯乙炔分子导线的合成

通过二碘代二茂铁与不同炔化物进行Sonogashira偶联反应,合成了3种新颖的含有二茂铁单元的苯乙炔齐聚物,用1H NMR、13C NMR和MS测试技术分别对其结构进行了表征。 并借助量子化学计算对3种分子的电子结构进行了预测,结果显示,该类型分子导线具有不同于其它类型苯乙炔齐聚物的LUMO能级持续衰减特征,因此极有可能具备极为优良的电子传输性能。     

Dendronized polymers via Diels–Alder “click” reaction

A modular approach toward the synthesis of polymers containing dendron groups as side chains is developed using the Diels–Alder “click” reaction. For this purpose, a styrene‐based polymer appended with anthracene groups as reactive side chains was synthesized. First through third‐generation polyester dendrons containing furan‐protected maleimide groups at their focal point were synthesized. Facile, reagent‐free, thermal Diels–Alder cycloaddition between the anthracene‐containing polymer and latent‐reactive dendrons leads to quantitative functionalization of the polymer chains to afford dendronized polymers. The efficiency of this functionalization step was monitored using ¹H and ¹³C NMR spectroscopy and FTIR and UV–vis spectrometry. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 410–416, 2010     

“Click polyester”: Synthesis of polyesters containing triazole units in the main chain via safe and rapid “click” chemistry and their properties

Click Cu(I)‐catalyzed polymerizations of diynes that contained ester linkages and diazides were performed to produce polyesters (click polyesters) of large molecular weights [(～1.0–7.0 ) × 10⁴], that contained main‐chain 1,4‐disubstitued triazoles in excellent yields. Incorporation of triazole improved the thermal properties and magnified the even‐odd effect of the methylene chain length. We also found that, by changing the positions of the triazole rings, the thermal properties of the polyesters could be controlled. The use of in situ azidation was a safe reaction, as explosive diazides are not used. In addition, the microwave heating was found to accelerate the polymerization rates. This is the first study that has applied click chemistry for the synthesis of a series of polyesters. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4207–4218, 2010     

Applications of “Hot” and “Cold” Bis(thiosemicarbazonato) Metal Complexes in Multimodal Imaging

The applications of coordination chemistry to molecular imaging has become a matter of intense research over the past 10 years. In particular, the applications of bis(thiosemicarbazonato) metal complexes in molecular imaging have mainly been focused on compounds with aliphatic backbones due to the in vivo imaging success of hypoxic tumors with PET (positron emission tomography) using ⁶⁴CuATSM [copper (diacetyl‐bis(N4‐methylthiosemicarbazone))]. This compound entered clinical trials in the US and the UK during the first decade of the 21^st century for imaging hypoxia in head and neck tumors. The replacement of the ligand backbone to aromatic groups, coupled with the exocyclic N's functionalization during the synthesis of bis(thiosemicarbazones) opens the possibility to use the corresponding metal complexes as multimodal imaging agents of use, both in vitro for optical detection, and in vivo when radiolabeled with several different metallic species. The greater kinetic stability of acenaphthenequinone bis(thiosemicarbazonato) metal complexes, with respect to that of the corresponding aliphatic ATSM complexes, allows the stabilization of a number of imaging probes, with special interest in “cold” and “hot” Cu(II) and Ga(III) derivatives for PET applications and ¹¹¹In(III) derivatives for SPECT (single‐photon emission computed tomography) applications, whilst Zn(II) derivatives display optical imaging properties in cells, with enhanced fluorescence emission and lifetime with respect to the free ligands. Preliminary studies have shown that gallium‐based acenaphthenequinone bis(thiosemicarbazonato) complexes are also hypoxia selective in vitro, thus increasing the interest in them as new generation imaging agents for in vitro and in vivo applications.     

Dendron–polymer conjugates via the diels–alder “click” reaction of novel anthracene‐based dendrons

Diblock and triblock dendron–polymer conjugates containing biodegradable polyester dendron blocks and polyethylene glycol (PEG) polymer were synthesized using the Diels–Alder “click” cycloaddition reaction. PEG polymers with furan‐protected maleimide functionality were synthesized and reacted with biodegradable polyester dendrons containing an anthracene moiety at their focal point. First through third generations of biodegradable polyester dendrons containing an anthracene unit at their focal point were synthesized using a divergent strategy. Efficient conjugation of the dendrons to polymers was demonstrated using ¹HNMR and size exclusion chromatography. This modular approach provides an easy access to the design of multivalent PEG conjugates. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3191–3201     

Synthesis of ω‐phosphonated poly(ethylene oxide)s through the combination of kabachnik–fields reaction and “click” chemistry

The synthesis of new ω‐phosphonic acid‐terminated poly(ethylene oxide) (PEOs) monomethyl ethers was investigated by the combination of Atherton–Todd or Kabachnik–Fields reactions and the “click” copper‐catalyzed 1,3‐dipolar cycloaddition of azides and terminal alkynes. The Atherton–Todd route fails to give the corresponding phosphonic acid‐terminated PEOs due to competitive cleavage of the P? N bond during the dealkylation step. In contrast, the Kabachnik–Fields route leads with very good yields to ω‐phosphonic acid‐PEO through “click” reaction of azido‐PEO onto dimethyl aminopropargyl phosphonate prepared by Kabachnik–Fields reaction between propargylbenzylimine and dimethyl phosphonate, followed by acidic hydrolysis. The reported methodology, precluding the use of anionic polymerization of ethylene oxide, leads to novel well‐defined phosphonic acid‐terminated PEOs from commercially available products in good yields. Moreover, such a strategy can be adapted to anchor phosphonic acid functionality onto a wide range of polymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

New Polyalkynyl Dendrons and Dendrimers: “Click” Chemistry with Azidomethylferrocene and Specific Anion and Cation Electrochemical Sensing Properties of the 1,2,3‐Triazole‐Containing Dendrimers

Dendrimers for ion sensing : The synthesis and use of new tris‐alkynyl dendrons are reported. So‐called “click” reactions of the dendrimers described with azidomethylferrocene give 27‐ferrocenyl, 81‐ferrocenyl, and 243‐ferrocenyl dendrimers. Electrochemical recognition of oxo‐anions and Pd²⁺ cations has been compared using the three polyferrocenyl dendrimers.

     

Poly(ortho‐phenylene ethynylene)s: Synthetic accessibility and optical properties

Poly(ortho‐phenylene ethynylene)s (PoPEs) have been synthesized via an in situ activation/coupling AB′ polycondensation protocol. The resulting polymers have been characterized by several analytical methods and are shown to have no structural defects. Although the Sonogashira–Hagihara polycondensation reaction is less efficient than for the preparation of the corresponding meta‐ and para‐linked polymers, presumably because of steric hindrance caused by the ortho substituents, the process can be accelerated by the use of microwave irradiation. Optical spectroscopy indicates solvent‐dependent conformational changes between extended transoid and helical cisoid conformations, providing the first experimental evidence for solvophobically driven folding of the PoPE backbone. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1619–1627, 2006