DNA binding and topoisomerase II inhibitory activity of water-soluble ruthenium(II) and rhodium(III) complexes

Water-soluble piano-stool arene ruthenium complexes based on 1-(4-cyanophenyl)imidazole (CPI) and 4-cyanopyridine (CNPy) with the formulas [(eta6-arene)RuCl2(L)] (L = CPI, eta6-arene = benzene (1), p-cymene (2), hexamethylbenzene (3); L = CNPy, eta6-arene = benzene (4), p-cymene (5), hexamethylbenzene (6)) have been prepared by our earlier methods. The molecular structure of [(eta6-C6Me6)RuCl2(CNPy)] (6) has been determined crystallographically. Analogous rhodium(III) complex [(eta5-C5Me5)RhCl2(CPI)] (7) has also been prepared and characterized. DNA interaction with the arene ruthenium complexes and the rhodium complex has been examined by spectroscopic and gel mobility shift assay; condensation of DNA and B-->Z transition have also been described. Arene ruthenium(II) and EPh3 (E = P, As)-containing arene ruthenium(II) complexes exhibited strong binding behavior, however, rhodium(III) complexes were found to be Topo II inhibitors with an inhibition percentage of 70% (7) and 30% (7a). Furthermore, arene ruthenium complexes containing polypyridyl ligands also act as mild Topo II inhibitors (10%, 3c and 40%, 3d) in contrast to their precursor complexes. Complexes 4-6 also show significant inhibition of beta-hematin/hemozoin formation activity.     

Coordination compounds of 2-mercapto-1-methylimidazole with platinum(II), palladium(II), rhodium(III) and ruthenium(III)

Summary Complexes of 2-mercapto-1-methylimidazole (TMZ) with Pt^II, Pd^II, Rh^III and Ru^III of the general formulae Pt(TMZ)₂Cl₂, Pd(TMZ)₄Cl₂. Rh(TMZ)Cl₃ and Ru(TMZ)Cl₃ have been obtained. The thermal stabilities of the compounds were estimated by derivatographic measurements and the electron-donating atom of the measurements and the electron-donating atom of the ligand was identified from the i.r. absorbtion spectra. Lattice constants for the Pt^II and Pd^II complexes were estimated from their x-ray powder diffraction patterns.     

Studies on ruthenium(III), rhodium(III) and iridium(III) complexes of indazoles

Summary New complexes of the general formula M(L)₃Cl₃ and M(5-AInz)₂Cl₃ · n H₂O (where M = Ru^III, Rh^III and Ir^III; L = indazole and 5-nitroindazole; n=1–2) have been synthesized and characterised by elemental analysis, molar conductance, magnetic susceptibility and i.r. and electronic spectral measurements. All the complexes are covalent and apparently have an octahedral geometry. The ligands are monocoordinated through the pyrrole nitrogen. From the far i.r. spectra amer configuration has been assigned to the indazole and 5-nitroindazole complexes.     

Multiply charged ions of ruthenium(II), rhodium(III) and cobalt(III) complexes in electrospray ionization mass spectrometry

Multiply charged ions from electrospray ionization (ESI) were observed for ruthenium-bidentate ligand complexes, such as [RuL₂B]X₂ and [(RuL₂)₂B]X₄, where L is 2,2′-bipyridine, B are tetradentate ligands of 2,2′-bis(2′-pyridyl)bibenzimidazole and 2,6-bis(2′-pyridyl)benzodiimidazole, bidentate ligand of 2-(2′-pyridyl)benzimidazole and related compounds and X is CIO₄^- or CI^-. ESI mass spectra showed a simple mass pattern for easy structural assignment and detecting impurities. The mass spectra for binuclear complexes provide a charge state distribution ranging from 4+ to 2+ for Ru(II)—Ru(II) compounds and 5+ to 2+ for Ru(II)—Rh(III) compounds. It was found that different multiply charged ions are generated by loss of counterions and by protonation/deprotonation at the proton site of ligands B. The abundances of these ions are qualitatively explained in terms of the acidity of metal complexes depending on the bridging ligand structures and the charge of the metal ions. Ions produced by removal of ligands were hardly observed.     

Aqueous rhodium(III) hydrides and mononuclear rhodium(II) complexes

In aqueous solutions, as in organic solvents, rhodium hydrides display the chemistry of one of the three limiting forms, i.e. {Rh(I)+ H+}, {Rh(II)+ H.}, and {Rh(III)+ H-}. A number of intermediates and oxidation states have been generated and explored in kinetic and mechanistic studies. Monomeric macrocyclic rhodium(II) complexes, such as L(H2O)Rh2+ (L = L1 = [14]aneN4, or L2 = meso-Me6[14]aneN4) can be generated from the hydride precursors by photochemical means or in reactions with hydrogen atom abstracting agents. These rhodium(II) complexes are oxidized rapidly with alkyl hydroperoxides to give alkylrhodium(III) complexes. Reactions of Rh(II) with organic and inorganic radicals and with molecular oxygen are fast and produce long-lived intermediates, such as alkyl, superoxo and hydroperoxo complexes, all of which display rich and complex chemistry of their own. In alkaline solutions of rhodium hydrides, the existence of Rh(I) complexes is implied by rapid hydrogen exchange between the hydride and solvent water. The acidity of the hydrides is too low, however, to allow the build-up of observable quantities of Rh(I). Deuterium kinetic isotope effects for hydride transfer to a macrocyclic Cr(v) complex are comparable to those for hydrogen atom transfer to various substrates.     

Cyclometallation ofN,N-dimethyl-3-furancarbothioamide with palladium(II), platinum(II), ruthenium(II) and rhodium(III)

Summary N, N-Dimethyl-3-furancarbothioamide (Hbft) was cyclometallated with Li₂PdCl₄, K₂PtCl₄, RuCl₂(CO)₃, and RhCl (PBu₃)₂ (PBu₃=tri-n-butylphosphine) to give, respectively, PdCl(bft), PtCl(bft), RuCl(bft)(CO)₂, and RhCl₂ (bft)(PBu₃)₂. These and some of their derivatives were characterized spectroscopically. Cyclometallation occurs regioselectively at position 2 of the furan ring to give a five-membered metallaheterocycle, along with Secoordination of the thioamide group. When the position 2 of the furan ring is blocked by a methyl group,N, N-dimethyl-2-methyl-3-furancarbothioamide (Hmft) is, in similar conditions, cyclopalladated at the N–Me substituout of the thioamide group, the furan ring being left intact. Position 4 of the furan ring of both Hbft and Hmft is unreactive toward cyclometallation.     

1,3-diaryltriazenido complexes of ruthenium(I), (II) and (III), and of osmium(III), rhodium(III) and iridium(III)

The synthesis and characterization of the platinum metal—1,3-diaryltriazenido complexes [Ru(ArNNNAr)(CO)₃]₂, [Ru(ArNNNAr)₂]₂, cis-Ru(ArNNNAr)₂(CO)₂, MX₂(ArNNNAr)(PPh₃)₂ (M = Ru, Os; X = Cl, Br) and M′(ArNNNAr)₃ (M′= Ru, Os, Rh and Ir) are reported. Axial ligand substitution in [Ru(ArNNNAr)(CO)₃]₂ and adduct formation by [Ru(ArNNNAr)₂]₂ are described. In contrast to other known Ru(II)/Ru(II) “lantern” molecules, the species [Ru(ArNNNAr)₂]₂ have measured magnetic moments equivalent to ca one unpaired electron per dimer, which are presumably due to population of the spin states σ²π⁴δ²π^*4 and σ²π⁴δ²π^*3σ^*1.     

Cyclic tetramers composed of rhodium(III), iridium(III), or ruthenium(II) half-sandwich and 6-purinethiones

Six new cyclic tetranuclear complexes [[M(Cp*)(L)](4)](4+) and [[Ru(II)(L)(cymene)](4)](4+) [Cp* = eta(5)-C(5)Me(5), cymene = eta(6)-p-MeC(6)H(4)Pr(i); M = Rh(III) and Ir(III); HL = 6-purinethione (H(2)put) and 2-amino-6-purinethione (H(2)aput)] were prepared in a self-assembly manner and characterized by NMR spectroscopy, electrospray ionization mass spectrometry, and X-ray crystal structure analysis. The two crystal structures of [[Rh(Cp*)(H(0.5)put)](4)](CF(3)SO(3))(2) and [[Ir(Cp*)(Haput)](4)](CF(3)SO(3))(4) revealed that they have similar S(4) structures with an alternate chirality array of CACA, and all ligands adopt a mu-1kappaN(9):2kappa(2)S(6),N(7) coordination mode. The orientations of the four bridging ligands are alternately up and down, and they form a central square cavity. Interestingly, the cationic tetramers of the former are stacked up along the c axis, resulting in an infinite channel-like cavity. The driving force of this stacking is due to intermolecular double hydrogen bonds [N(1)-H...N(21) = 2.752(4) A] at both sides of the cavity. In the two Rh(III)- and Ru(II)-H(2)aput systems, it turned out that the dimeric species are dominantly formed in the reaction solutions but finally convert into the tetrameric species.     

Theoretical study of rhodium(III)-catalyzed hydrogenation of carbon dioxide into formic acid. Significant differences in reactivity among rhodium(III), rhodium(I), and ruthenium(II) complexes

The title reaction was theoretically investigated, where cis-[RhH(2)(PH(3))(3)](+) and cis-[RhH(2)(PH(3))(2)(H(2)O)](+) were adopted as models of the catalyst. The first step of the catalytic cycle is the CO(2) insertion into the Rh(III)-H bond, of which the activation barrier (E(a)) is 47.2 and 28.4 kcal/mol in cis-[RhH(2)(PH(3))(3)](+) and cis-[RhH(2)(PH(3))(2)(H(2)O)](+), respectively, where DFT(B3LYP)-calculated E(a) values (kcal/mol unit) are given hereafter. These results indicate that an active species is not cis-[RhH(2)(PH(3))(3)](+) but cis-[RhH(2)(PH(3))(2)(H(2)O)](+). After the CO(2) insertion, two reaction courses are possible. In one course, the reaction proceeds through isomerization (E(a) = 2.8) of [RhH(eta(1)- OCOH)(PH(3))(2)(H(2)O)(2)](+), five-centered H-OCOH reductive elimination (E(a) = 2.7), and oxidative addition of H(2) to [Rh(PH(3))(2)(H(2)O)(2)](+) (E(a) = 5.8). In the other one, the reaction proceeds through isomerization of [RhH(eta(1)-OCOH)(PH(3))(2)(H(2)O)(H(2))](+) (E(a) = 5.9) and six-centered sigma-bond metathesis of [RhH(eta(1)-OCOH)(PH(3))(2)(H(2)O)](+) with H(2) (no barrier). RhH(PH(3))(2)-catalyzed hydrogenation of CO(2) proceeds through CO(2) insertion (E(a) = 1.6) and either the isomerization of Rh(eta(1)-OCOH)(PH(3))(2)(H(2)) (E(a) = 6.1) followed by the six-centered sigma-bond metathesis (E(a) = 0.3) or H(2) oxidative addition to Rh(eta(1)-OCOH)(PH(3))(2) (E(a) = 7.3) followed by isomerization of RhH(2)(eta(1)-OCOH)(PH(3))(2) (E(a) = 6.2) and the five-centered H-OCOH reductive elimination (E(a) = 1.9). From these results and our previous results of RuH(2)(PH(3))(4)-catalyzed hydrogenation of CO(2) (J. Am. Chem. Soc. 2000, 122, 3867), detailed discussion is presented concerning differences among Rh(III), Rh(I), and Ru(II) complexes.     

Pentafluorophenylthiolate derivatives of ruthenium(II), rhodium(I) and palladium(II)

Summary The pentafluorophenylthiolate anion [C₆F₅S]^– reacts with chloro-bridged binuclear complexes of Ru^II, Rh^I and Pd^II to give the compounds [(N-N)(PPh₃)₂Ru(SC₆F₅)]₂Cl₂ (1) (N-N = bipyridine), [LRh(SC₆F₅)]_n (L = cycloocta-1,5-diene (2) or norbornadiene (3), n = 2 and L = dicyclopentadiene (4) for which n is probably 4), [(PPh₃)Pd(SC₆F₅)Cl]₂ (5) and (MeS-CHMeCHMeSMe)Pd(SC₆F₅), (6).¹⁹F n.m.r. spectroscopy shows a variable number of isomers depending on the compound considered.     

Preparation and characterization of ruthenium(II), rhodium(III) and iridium(III) complexes of isocyanide bearing the azo group

Reactions of [(η⁶-arene)RuCl₂]₂ (1) (η⁶-arene=p-cymene (1a), 1,3,5-Me₃C₆H₃ (1b), 1,2,3-Me₃C₆H₃ (1c) 1,2,3,4-Me₄C₆H₂(1d), 1,2,3,5-Me₄C₆H₂ (1e) and C₆Me₆ (1f)) or [Cp*MCl₂]₂ (M=Rh (2), Ir (3); Cp*=C₅Me₅) with 4-isocyanoazobenzene (RNC) and 4,4′-diisocyanoazobenzene (CN–R–NC) gave mononuclear and dinuclear complexes, [(η⁶-arene)Ru(CNC₆H₄N=NC₆H₅)Cl₂] (4a–f), [Cp*M(CNC₆H₄N=NC₆H₅)Cl₂] (5: M=Rh; 6: M=Ir)_, [{(η⁶-arene)RuCl₂}₂{μ-CNC₆H₄N=NC₆H₄NC}] (8a–f) and [(Cp*MCl₂)₂(μ-CNC₆H₄N=NC₆H₄NC)}] (9: M=Rh; 10: M=Ir)_, respectively. It was confirmed by X-ray analyses of 4a and 5 that these complexes have trans-forms for the ---N=N--- moieties. Reaction of [Cp*Rh(dppf)(MeCN)](PF₆)₂ (dppf=1,1′-bis (diphenylphosphino)ferrocene) with 4-isocyanoazobenzene gave [Cp*Rh(dppf)(CNC₆H₄N=NC₆H₅)](PF₆)₂ (7), confirmed by X-ray analysis. Complex 8b reacted with Ag(CF₃SO₃), giving a rectangular tetranuclear complex 11b, [{(η⁶-1,3,5-Me₃C₆H₃)Ru(μ-Cl}₄(μ-CNC₆H₄N=NC₆H₄NC)₂](CF₃SO₃)₄ bridged by four Cl atoms and two μ-diisocyanoazobenzene ligands. Photochemical reactions of the ruthenium complexes (4 and 8) led to the decomposition of the complexes, whereas those of 5, 7, 9 and 10 underwent a trans-to-cis isomerization. In the electrochemical reactions the reductive waves about −1.50 V for 4 and −1.44 V for 8 are due to the reduction of azo group, [---N=N---]→[---N=N---]²⁻. The irreversible oxidative waves at ca. 0.87 V for the 4 and at ca. 0.85 V for 8 came from the oxidation of Ru(II)→Ru(III).     

Oxygenation of a ruthenium(II) thiolate to a ruthenium(II) sulfinate proceeds via ruthenium(III)

Exposure of acetonitrile/methanol solutions of [PPN][Ru(DPPBT)3] [PPN = bis(triphenylphosphoranylidene); DPPBT = 2-diphenylphosphinobenzene thiolate] to oxygen initiates metal-centered oxidation, yielding the ruthenium(III) thiolate Ru(DPPBT)3. Ru(DPPBT)3 further reacts with oxygen, at sulfur, to give the ruthenium(III) sulfinate complex [Ru(DPPBT-O2)2(DPPBT)], which is reduced under ambient conditions to [PPN][Ru(DPPBT-O2)2(DPPBT)]. Ruthenium(II) sulfinate is the only product isolated from acetonitrile/methanol. Yellow crystals of [PPN][Ru(DPPBT-O2)2(DPPBT)] were obtained. Ruthenium(III) sulfinate was isolated as green prism-shaped crystals upon oxygenation of [PPN][Ru(DPPBT)3] in chlorobenzene/hexane. Electrochemical oxidation of ruthenium(II) sulfinate yields the ruthenium(III) derivative, which is rapidly reduced back to ruthenium(II) upon the addition of hydroxide.     

Ligating properties of thionitrosoamines: IV. Cationic complexes of rhodium(I), rhodium(III), and ruthenium(II) containing N-thionitrosodimethylamine

The solvento species obtained by treatment of the complexes [Rh(1,5-cyclooctadiene)Cl]₂, [Rh(norbornadiene)Cl]₂, [Rh(CO)₂Cl]₂, C₅H₅Rh(CO)I₂, [C₅Me₅RhCl₂]₂, and [Ru(C₆H₆)Cl₂]₂ with AgPF₆ in acetone or acetonitrile react with a large excess of Me₂NNS to give the compounds [Rh(1,5-C₈H₁₂)-(SNNMe₂)₂]PF₆ (1a), [Rh(C₇H₈)(SNNMe₂)₂]PF₆ (1b), [Rh(CO)₂(SNNMe₂)₂]PF₆ (2), [C₅H₅Rh(SNNMe₂)₃](PF₆)₂ (3), [C₅Me₅Rh(SNNMe₂)₃](PF₆)₂ (4), and [Ru(C₆H₆(SNNMe₂)₃](PF₆) (5). If the thionitroso ligand is not preent in large excess decomposition often occurs. The use of AgClO₄ allows isolation of the perchlorate salts of 1a, 1b, 2, 4, and 5, and the complexes [C₅H₅Rh-(SNNMe₂)₂(ClO₄)ClO₄ (6) and Rh(1,5-C₈H₁₂)(SNNMe₂)(ClO₄) (7). In the H¹ NMR spectra the methyl protons of Me₂NNS are observed as two quadruplets, in the range δ 3.75–4.25 (⁴J(HH) ca. 0.7 Hz) because of restricted rotation around the NN bond. The rhodium(I) complexes (1a, 1b, and 2) reacts with PPh₃ or p-tolylPPh₂ to give labile products, and only [Rh(1,5-C₈H₁₂)(SNNMe₂)(PPh₃)]ClO₄ (8) and [Rh(1,5-C₈H₁₂)(SNNMe₂)(p-tolylPPh₂)]ClO₄ (9) were isolated and characterized.     

Intermolecular rhodium(II)-catalyzed reactions with silicon-substituted carbonyl ylides

[reaction: see text] The Rh(II)-catalyzed reaction of benzyl 2-trialkylsilyl-2-diazoacetates with various acyclic and cyclic ketones affords novel dioxolanones via silicon-substituted carbonyl ylides in up to 98% yield.     

Complexes of ruthenium(II) and -(III) with dimethylsulphoxide—III. Bis-iodo-tetrakis- dimethylsulphoxide ruthenium(II) and some other iodo complexes of ruthenium(II)

The ruthenium(II) complex [RuI₂(Me₂SO)₄] was synthesized and characterized. The Me₂SO ligands are all S-bonded. Reactions of RuI₂(Me₂SO)₄ with ligands containing P, N and S donor atoms have been carried out and the complexes obtained were characterized using different physical methods. [RuI₂L₄] (L= CH₃CN, Me₂SO and py), [RuI₂(CH₃CN)₂(PPh₃)₂] and [RuI₂(CS)(PPh₃)₃] have been synthesized using RuI₃ as the source material and characterized as above.     

Synthesis and spectral characteristics of ruthenium(III), rhodium(III), and palladium(II) complexes with 2-(3-pyridylmethyliminomethyl)phenol

New Ru(III), Rh(III), and Pd(II) complexes with the ambident ligand 2-(3-pyridylmethyliminomethyl)phenol have been synthesized and characterized by electronic absorption and IR spectroscopy, ¹H NMR, and elemental analysis and electrophoresis methods. The synthesis conditions and the nature of the metal turn out to have an effect on the coordination mode of the ligand in the resulting complexes. The existence of the intramolecular hydrogen bond in the ligand molecule is favorable for its coordination in the molecular form to the complex-forming metal.     

Copper(II) and ruthenium(II)/(III) Schiff base complexes

Metal complexes of general formula [Cu(L)](ClO4)2, [Ru(L)(PPh3)2]Cl2 and [Ru(L)(PPh3)Cl]Cl2[L = 1,4-di- (o-benzylidiminophenoxy/benzylidiminophenylthio)butane] containing N2O2 or N2S2 donor atoms have been prepared and characterised by spectral, magnetic and cyclic voltammetric studies. The rhombic nature of the e.s.r. spectra of the RuIII complexes indicates an asymmetry in the electronic environment around the Ru atom. e.s.r. spectra of the CuII complexes show a typical four-line spectrum with approximate tetrahedral distortion. The observed low A values in the CuII complexes, of the order of 132–160 × 10–4cm–1, indicates a tetrahedrally distorted square planar structure.The influence of modified ligands is reflected in the metal-centered redox potentials. CuII complexes having the N2S2 chromophore, in MeCN on a glassy carbon electrode, undergo quasi-reversible reduction in the 540–680 mV range. A depression in E1/2 values for the open chain N2S2 chromophoric macrocyclic CuII complexes, compared to electronically similar cyclic tetradentate CuII analogues, is due to the increased stabilization of the CuI state by added flexibility provided through the open chain donor sites.     

Ion exchange equilibria in simultaneous extraction of platinum(II,IV) and rhodium(III) from hydrochloric solutions

Regularities of sorption extraction of platinum(II, IV) and rhodium(III) by anion exchangers of various physical and chemical structure in the presence of hydrochloric media were studied. It is established that AM-2B, Purolite A 500, and Purolite S 985 ionites adsorb complex anions of platinum metals employing mixed mechanism. A high affinity of the studied anionites for the studied complex anions of platinum and rhodium is established.     

Synthesis and characterisation of chelated (1-cyanoethyl)ruthenium(II) carbonyl complexes

The reaction between acrylonitrile and the RuH bond in HRu(CO)Cl(PPh₃)₃ results in the formation of a binuclear ruthenium(II) complex having chlorine bridges which are easily broken by sodio-derivatives of bidentate chelating ligands giving mononuclear hexacoordinated ruthenium(II) compounds. The RuC bond in these new complexes has been found to be stable towards nucleophilic reagents. The stereochemistry for these complexes has been suggested on the basis of IR, ¹H and ³¹P NMR spectra.