Synthesis and properties of the Co7Se8−xSx and Ni7Se8−xSx solid solutions

We report the synthesis and elementary properties of the Co₇Se_8−xS_x (x=0-8) and Ni₇Se_8−xS_x (x=0-7) solid solutions. Both systems form a NiAs-type structure with metal vacancies. In general, the lattice parameters decrease with increasing x, but in the Ni₇Se_8−xS_x system c increases on going from x=5 to 7. Magnetic susceptibility measurements show that all samples exhibit temperature-independent paramagnetism from 25-250 K. Samples within the Co₇Se_8−xS_x system, as well as Ni₇Se₈ and Ni₇SeS₇, were found to be poor metals with resistivities of ∼0.20 and ∼0.06 mΩ cm at 300 K, respectively. The Sommerfeld constant (γ) was determined from specific heat measurements to be ∼13 mJ/mol_CoK² and ∼7 mJ/mol_NiK² for Co₇Se_8−xS_x and Ni₇Se_8−xS_x, respectively.     

(Mn1−xPbx)Pb10+ySb12−yS26−yCl4+yO, a new oxy-chloro-sulfide with ∼2 nm-spaced (Mn,Pb)Cl4 single chains within a waffle-type crystal structure

The new oxy-chloro-sulfide (Mn_1−xPb_x)Pb_10+ySb_12−yS_26−yCl_4+yO (x ∈ [0.2-0.3]; y ∈ [0.3-1.6]) was synthesized by dry way at 500-600 °C. A single crystal ∼Mn_0.7Pb_11.0Sb_11.3S_25.3Cl_4.7O indicates a monoclinic symmetry, space group C2/m, with a = 37.480(8), b = 4.1178(8), c = 18.167(4) Å, β = 106.37(3)°, V = 2690.2(9) Å³, Z = 2. Its crystal structure was determined by X-ray single crystal diffraction, with a final R = 5.11%. Modular analysis of the crystal structure reveals a “waffle” architecture, where complex rods with lozenge section delimitate an internal channel filled by a single chain of (Mn_0.7Pb_0.3)Cl₆ octahedra connected by opposite edges. Minimal inter-chain distances are close to 18 Å. The rod wall, two-atom thick, presents, in alternation with S atoms, Pb or (Pb,Sb) cations with prismatic coordination in the internal atom layer, while the external atom layer is constituted exclusively by Sb cations with dissymmetric square pyramidal coordination. A (Pb,Sb)₂S₂ fragment connects two successive rods along (2 0 1) to form a waffle-type palissadic layer. The unique O position, half filled, presents the same environment than the isolated O positions in the oxy-sulfide Pb₁₄Sb₃₀S₅₄O₅, or oxy-chloro-sulfides Pb₁₈Sb₂₀S₄₆Cl₂O and (Cu,Ag)₂Pb₂₁Sb₂₃S₅₅ClO. This compound belongs to a pseudo-homologous series of chalcogenides with waffle structure, ordered according to the size of their lozenge shape channel. Such a complex senary compound of the oxy-chloro-sulfide type illustrates the structural competition between three cations, on one hand, and, on the other hand, three anions. This compound is of special interest regarding the 1D distribution of magnetic Mn²⁺ atoms at the ∼2 nm scale.     

Optical properties of (Y1−xTmx)3GaO6 and subsolidus phase relation of Y2O3-Ga2O3-Tm2O3

A serial of samples in Y₂O₃-Ga₂O₃-Tm₂O₃ pseudo-ternary system are prepared by solid-state chemical reaction method. The range of solid solution in (Y_1−xTm_x)₃GaO₆ is 0<x<0.384. Powder X-ray diffraction shows that the compounds crystallize in Gd₃GaO₆ (Cmc2₁)-type structure. The solid solubilities of Y_3+xGa_5−xO₁₂ (x=0-0.77) and Tm_3+xGa_5−xO₁₂ (x=0-0.62) are 37.5-47.11 at% Y₂O₃, and 37.5-45.26 at% Tm₂O₃, respectively. PL spectra of Tm-doped Y₃GaO₆ show that there is a sharp blue emission at ∼456 nm from the ¹D₂→³F₄ transition at room temperatures with two lifetimes (∼5 and ∼15 μs) and a narrow saturation range of PL intensity for the Tm³⁺ content from x=0.005 to 0.03. The sharp emission and long lifetime of (Y_1−xTm_x)₃GaO₆ indicate that Y₃GaO₆ is a potential phosphor and laser crystal host material.     

Visible light-sensitive yellow TiO2−xNx and Fe-N co-doped Ti1−yFeyO2−xNx anatase photocatalysts

Nitrogen substituted yellow colored anatase TiO_2−xN_x and Fe-N co-doped Ti_1−yFe_yO_2−xN_x have been easily synthesized by novel hydrazine method. White anatase TiO_2−δ and N/Fe-N-doped samples are semiconducting and the presence of ESR signals at g ∼1.994-2.0025 supports the oxygen vacancy and g∼4.3 indicates Fe³⁺ in the lattice. TiO_2−xN_x has higher conductivity than TiO_2−x and Fe/Fe-N-doped anatase and the UV absorption edge of white TiO_2−x extends in the visible region in N, Fe and Fe-N co-doped TiO₂, which show, respectively, two band gaps at ∼3.25/2.63, ∼3.31/2.44 and 2.8/2.44 eV. An activation energy of ∼1.8 eV is observed in Arrhenius log resistivity vs. 1/T plots for all samples. All TiO₂ and Fe-doped TiO₂ show low 2-propanol photodegradation activity but have significant NO photodestruction capability, both in UV and visible regions, while standard Degussa P-25 is incapable in destroying NO in the visible region The mid-gap levels that these N and Fe-N-doped TiO₂ consist may cause this discrepancy in their photocatalytic activities.     

Study on glass transition and crystallization kinetics of GexSb40−xSe60 glasses by differential thermal analysis

Basic thermal parameters such as the glass transition and crystallization temperatures of bulk Ge_xSb_40−xSe₆₀ (x=15, 20, 25, 27, 32 and 35) glasses have been determined by differential thermal analysis. The observed peculiarity in the variation of the glass transition temperature with the heating rate increase in the narrow range of average coordination number Z=2.65-2.67 has been related to structural and chemical transitions. It has been established that especially the compositions at x=20, 25 and 27 do not crystallize by the applied non-isothermal regime. Identification of the corresponding crystalline phases for the rest samples has been specified. The apparent activation energy of crystallization has values of ∼174 kJ mol⁻¹.     

Chemical shifts of atomic core levels and structure of K1−xTi1−xSbxOPO4, x=0-0.23, solid solutions

Antimony-doped K_1−xTi_1−xSb_xOPO₄, x=0.23, crystals have been prepared by spontaneous nucleation from the flux in the quaternary system K₂O-TiO₂-P₂O₅-Sb₂O₅. Crystal structure observation with TEM method reveals the presence of superstructure ordering. Core level electronic parameters have been studied by X-ray photoelectron spectroscopy. Strong effect of Sb doping has been detected for inner shells of Ti⁴⁺ ions. Prominent decreasing of the binding energy difference Δ(O 1s-Ti 2p_3/2) correlates with the shortening of mean oxide bond length L(Ti−O) at x=0.23 that suggests increased ionicity of Ti−O bonds in K_1−xTi_1−xSb_xOPO₄ solid solutions.     

High-temperature thermoelectric studies of A11Sb10 (A=Yb, Ca)

Large samples (6-8 g) of Yb₁₁Sb₁₀ and Ca₁₁Sb₁₀ have been synthesized using a high-temperature (1275-1375 K) flux method. These compounds are isostructural to Ho₁₁Ge₁₀, crystallizing in the body-centered, tetragonal unit cell, space group I4/mmm, with Z=4. The structure consists of antimony dumbbells and squares, reminiscent of Zn₄Sb₃ and filled Skutterudite (e.g., LaFe₄Sb₁₂) structures. In addition, these structures can be considered Zintl compounds; valence precise semiconductors with ionic contributions to the bonding. Differential scanning calorimetry (DSC), thermogravimetry (TG), resistivity (ρ), Seebeck coefficient (α), thermal conductivity (κ), and thermoelectric figure of merit (zT) from room temperature to at minimum 975 K are presented for A₁₁Sb₁₀ (A=Yb, Ca). DSC/TG were measured to 1400 K and reveal the stability of these compounds to ∼1200 K. Both A₁₁Sb₁₀ (A=Yb, Ca) materials exhibit remarkably low lattice thermal conductivity (∼10 mW/cm K for both Yb₁₁Sb₁₀ and Ca₁₁Sb₁₀) that can be attributed to the complex crystal structure. Yb₁₁Sb₁₀ is a poor metal with relatively low resistivity (1.4 mΩ cm at 300 K), while Ca₁₁Sb₁₀ is a semiconductor suggesting that a gradual metal-insulator transition may be possible from a Ca_11−xYb_xSb₁₀ solid solution. The low values and the temperature dependence of the Seebeck coefficients for both compounds suggest that bipolar conduction produces a compensated Seebeck coefficient and consequently a low zT.     

Thermoelectric properties of p-type pseudo-binary (Ag0.365Sb0.558Te)x-(Bi0.5Sb1.5Te3)1−x (x=0-1.0) alloys prepared by spark plasma sintering

In this paper, pseudo-binary (Ag_0.365Sb_0.558Te)_x-(Bi_0.5Sb_1.5Te₃)_1−x (x=0-1.0) alloys were prepared using spark plasma sintering technique, and the composition-dependent thermoelectric properties were evaluated. Electrical conductivities range from 7.9×10⁴ to 15.6×10⁴ Ω⁻¹ m⁻¹ at temperatures of 507 and 318 K, respectively, being about 3.0 and 8.5 times those of Bi_0.5Sb_1.5Te₃ alloy at the corresponding temperatures. The optimal dimensionless figure of merit (ZT) of the sample with molar fraction x=0.025 reaches 1.1 at 478 K, whereas that of the ternary Bi_0.5Sb_1.5Te₃ alloy is 0.58 near room temperature. The results also reveal that a direct introduction of Ag_0.365Sb_0.558Te in the Bi-Sb-Te system is much more effective to the property improvement than naturally precipitated Ag_0.365Sb_0.558Te in the Ag-doped Ag-Bi-Sb-Te system.     

The lanthanoid polyantimonides with the ideal compositions Pr5Sb12 and Nd5Sb12 crystallizing with a new structure type and Ho2Sb5 with Dy2Sb5-type structure

The title compounds were isolated in well-crystallized form from samples with a substantial excess of antimony, annealed at temperatures slightly below the melting point of that element. Their crystal structures were determined from single-crystal diffractometer data. Pr_9-xSb_21-y and Nd_9-xSb_21-y crystallize with a new monoclinic structure type, Pearson symbol mS(62-5.4), space group Cm, Z=2 with a=2859.1(4) pm, b=426.3(1) pm, c=1356.1(2) pm, β=95.52(1)°, R=0.034 for 4351 structure factors and 188 variable parameters for Pr_9-xSb_21-y and a=2845(2) pm, b=424.7(8) pm, c=1345.9(9) pm, β=95.42(7)°, R=0.069 for 2928 F values and 188 variables for Nd_9-xSb_21-y. Of the 30 atomic sites, three show fractional occupancy corresponding to the compositions Pr_8.303(5)Sb_20.03(1) and Nd_8.30(2)Sb_19.98(9), respectively. A model for the order of occupied atomic sites with a tripled b-axis is proposed resulting in the ideal compositions Pr₅Sb₁₂ and Nd₅Sb₁₂. The holmium compound Ho₂Sb₅ has a Dy₂Sb₅-type structure: mP28, P2₁/m, a=1301.8(3) pm, b=414.9(1) pm, c=1451.1(2) pm, β=102.14(1)°, R=0.028 for 2573 F values and 86 variables. In both structure types most rare earth atoms have nine antimony neighbors forming tricapped trigonal prisms. The coordination polyhedra of the antimony atoms show a great variety, with a trigonal prism of rare earth atoms as one extreme case. The other extreme coordination of an antimony atom is a distorted octahedron formed by six antimony atoms. The differences and similarities of both structures are discussed. Chemical bonding within the antimony polyanions is analyzed on the basis of an extended Zintl-Klemm concept using bond-length-bond-strength relationships.     

Thermoelectric properties of polycrystalline La1−xSrxCoO3

Thermoelectric properties of polycrystalline La_1−xSr_xCoO₃, where Sr²⁺ is substituted in La³⁺ site in perovskite-type LaCoO₃, have been investigated. Sr-doping increases the electrical conductivity (σ) of La_1−xSr_xCoO₃, and also decreases the Seebeck coefficient (S) for 0.01?x?0.40. A Hall coefficient measurement reveals that the increase in electrical conductivity arises from increases in both carrier concentration and the Hall mobility. The decrease in the Seebeck coefficient is caused by a decrease in carrier effective mass as well as increase in carrier concentration. The highest power factor (σS²) is 3.7×10⁻⁴ W m⁻¹ K⁻² at 250 K for x=0.10. The thermal conductivity (κ) is about 2 W m⁻¹ K⁻¹ at 300 K for 0?x?0.04, and increases for x?0.05 because of an increase in heat transport by conductive carrier. The thermoelectric properties of La_1−xSr_xCoO₃ are improved by Sr-doping, and the figure of merit (Z=σS² κ⁻¹) reaches 1.6×10⁻⁴ K⁻¹ for x=0.06 at 300 K (ZT=0.048). For heavily Sr-doped samples, the thermoelectric properties diminish mainly because of the decrease in the Seebeck coefficient and the increase in thermal conductivity.     

Visible and infrared luminescence properties of Er-doped Y2Ti2O7 nanocrystals

Er³⁺-doped Y₂Ti₂O₇ nanocrystals were fabricated by the sol-gel method. While the annealing temperature exceeds 757 °C, amorphous pyrochlore phase Er_xY_2−xTi₂O₇ transfers to well-crystallized nanocrystals, and the average crystal size increases from ∼70 to ∼180 nm under 800-1000 °C/1 h annealing. Er_xY_2−xTi₂O₇ nanocrystals absorbing 980 nm photons can produce the upconversion (526, 547, and 660 nm; ²H_11/2→⁴I_15/2, ⁴S_3/2→⁴I_15/2, and ⁴F_9/2→⁴I_15/2, respectively) and Stokes (1528 nm; ⁴I_13/2→⁴I_15/2) photoluminescence (PL). The infrared PL decay curve is single-exponential for Er³⁺ (5 mol%)-doped Y₂Ti₂O₇ nanocrystals but slightly nonexponential for Er³⁺ (10 mol%)-doped Y₂Ti₂O₇ nanocrystals. For 5 and 10 mol% doping concentrations, the mechanism of up-converted green light is the two-photon excited-state absorption. Much stronger intensity of red light relative to green light was observed for the sample with 10 mol% dopant. This phenomenon can be attributed to the reduced distance between Er³⁺-Er³⁺ ions, resulting in the enhancement of the energy-transfer upconversion and cross-relaxation mechanisms.     

Mild hydrothermal synthesis and magnetic properties of the manganates Pr1−xCaxMnO3

The calcium-doped manganates, Pr_1−xCa_xMnO₃ (x=0.39, 0.46, 0.70, 0.76), were synthesized as cube-shaped crystalline phases under mild hydrothermal conditions for the first time. The crystals could be grown in one step from solutions of metal salts and potassium hydroxide at temperatures ∼240 °C, and found to adopt perovskite-like structure (space group Pbnm). Samples were characterized by powder X-ray diffraction, scanning electron microscopy, inductively coupled plasma analysis and variable temperature dc/ac magnetic susceptibility. The studies indicate that formation of the materials is dependent on the alkalinity and composition of the initial reaction mixtures. The magnetic properties show spin-glass-like behavior due to competing ferromagnetic (FM) and antiferromagnetic (AFM) exchange interactions in Pr_1−xCa_xMnO₃ with x=0.39, 0.46.     

Crystal chemistry of Co-doped Zn7Sb2O12

Zn₇Sb₂O₁₂ forms a full range of Co-containing α solid solutions, Zn_7−xCo_xSb₂O₁₂, with an inverse-spinel structure at high temperature. At low temperatures for x<2, the solid solutions transform into the low temperature β-polymorph. For x=0, the β→α transition occurs at 1225±25 °C; the transition temperature decreases with increasing x. At high x and low temperatures, α solid solutions are formed but are non-stoichiometric; the (Zn+Co):Sb ratio is >7:2 and the compensation for the deficiency in Sb is attributed to the partial oxidation of Co²⁺ to Co³⁺. From Rietveld refinements using ND data, Co occupies both octahedral and tetrahedral sites at intermediate values of x, but an octahedral preference attributed to crystal field stabilisation, causes the lattice parameter plot to deviate negatively from the Vegard's law. Sub-solidus compatibility relations in the ternary system ZnO-Sb₂O₅-CoO have been determined at 1100 °C for the compositions containing ?50% Sb₂O₅.     

Structure and physical properties of ternary W5Si3-type antimonides and bismuthides Zr5M1-xPn2+x (M=Cr, Mn; Pn=Sb, Bi)

Four new ternary compounds Zr₅M_1-xPn_2+x (M=Cr, Mn; Pn=Sb, Bi) were synthesized by arc-melting and annealing at 800 °C. They crystallize in the tetragonal W₅Si₃-type structure. The crystal structure of Zr₅Cr_0.49(2)Sb_2.51(2) was refined from powder X-ray diffraction data by the Rietveld method (Pearson symbol tI32, tetragonal, space group I4/mcm, Z=4, a=11.1027(6) Å, c=5.5600(3) Å). Four-probe electrical resistivity measurements on sintered polycrystalline samples indicated metallic behavior. Magnetic susceptibility measurements between 2 and 300 K revealed temperature-independent Pauli paramagnetism for Zr₅Cr_1-xSb_2+x and Zr₅Cr_1-xBi_2+x, but a strong temperature dependence for Zr₅Mn_1-xSb_2+x and Zr₅Mn_1-xBi_2+x which was fit to the Curie-Weiss law for the latter with θ=-11.3 K and μ_eff=1.81(1) μ_B. Band structure calculations for Zr₅Cr_0.5Sb_2.5 support a structural model in which Cr and Sb atoms alternate within the chain of interstitial sites formed at the centers of square antiprismatic Zr₈ clusters.     

Syntheses, structure, magnetism, and optical properties of the interlanthanide sulfides δ-Ln2−xLuxS3 (Ln=Ce, Pr, Nd)

δ-Ln_2−xLu_xS₃ (Ln=Ce, Pr, Nd; x=0.67-0.71) compounds have been synthesized through the reaction of elemental rare-earth metals and S using a Sb₂S₃ flux at 1000 °C. These compounds are isotypic with CeTmS₃, which has a complex three-dimensional structure. It includes four larger Ln³⁺ sites in eight- and nine-coordinate environments, two disordered seven-coordinate Ln³⁺/Lu³⁺ positions, and two six-coordinate Lu³⁺ ions. The structure is constructed from one-dimensional chains of LnS_n (n=6-9) polyhedra that extend along the b-axis. These polyhedra share faces or edges with two neighbors within the chains, while in the [ac] plane they share edges and corners with other chains. Least square refinements gave rise to the formulas of δ-Ce_1.30Lu_0.70S₃, δ-Pr_1.29Lu_0.71S₃ and δ-Nd_1.33Lu_0.67S₃, which are consistent with the EDX analysis and magnetic susceptibility data. δ-Ln_2−xLu_xS₃ (Ln=Ce, Pr, Nd; x=0.67-0.71) show no evidence of magnetic ordering down to 5 K. Optical properties measurements show that the band gaps for δ-Ce_1.30Lu_0.70S₃, δ-Pr_1.29Lu_0.71S₃, and δ-Nd_1.33Lu_0.67S₃ are 1.25, 1.38, and 1.50 eV, respectively. Crystallographic data: δ-Ce_1.30Lu_0.70S₃, monoclinic, space group P2₁/m, a=11.0186(7), b=3.9796(3), c=21.6562(15) Å, β=101.6860(10), V=929.93(11), Z=8; δ-Pr_1.29Lu_0.71S₃, monoclinic, space group P2₁/m, a=10.9623(10), b=3.9497(4), c=21.5165(19) Å, β=101.579(2), V=912.66(15), Z=8; δ-Nd_1.33Lu_0.67S₃, monoclinic, space group P2₁/m, a=10.9553(7), b=3.9419(3), c=21.4920(15) Å, β=101.5080(10), V=909.47(11), Z=8.     

Composition-induced structural phase transitions in the (Ba1−xLax)2In2O5+x (0?x?0.6) system

Composition-induced structural phase changes across the high temperature, fast oxide ion conducting (Ba_1−xLa_x)₂In₂O_5+x, 0?x?0.6, system have been carefully analysed using hard mode infrared (IR) powder absorption spectroscopy, X-ray powder diffraction and electron diffraction. An orthorhombic brownmillerite to three-dimensionally disordered cubic perovskite phase transition in this system is signalled by a drastic change in slope of both wavenumber and average line widths of IR spectra as a function of composition. Some evidence is found for the existence of an intermediate tetragonal phase (previously reported to exist from electron diffraction data) around x∼0.2. The new spectroscopic data have been used to compare microscopic and macroscopic strain parameters arising from variation in composition. The strain and spectroscopic data are consistent with first-order character for the tetragonal→orthorhombic transition, while the cubic→tetragonal transition could be continuous. Differences between the variation with composition of spectral parameters and of macroscopic strain parameters are consistent with a substantial order/disorder component for the transitions. There is also evidence for precursor effects within the cubic structure before symmetry is broken.     

The effect of nitrogen on the cycling performance in thin-film Si1−xNx anode

The effects of nitrogen on the electrochemical properties of silicon-nitrogen (Si_1−xN_x) thin films were examined in terms of their initial capacities and cycling properties. In particular, Si_0.76N_0.24 thin films showed negligible initial capacity but an abrupt capacity increase to ∼2300 mA h/g after ∼650 cycles. The capacity of pure Si thin films was deteriorated to ∼20% of the initial level after 200 cycles between 0.02 and 1.2 V at 0.5 C (1 C=4200 mA/g), whereas the Si_0.76N_0.24 thin films exhibited excellent cycle-life performance after ∼650 cycles. In addition, the Si_0.76N_0.24 thin films at 50 °C showed an abrupt capacity increase at an earlier stage of only ∼30 cycles. The abnormal electrochemical behaviors in the Si_0.76N_0.24 thin films were demonstrated to be correlated with the formation of Li₃N and Si₃N₄.     

Effects of Rh on the thermoelectric performance of the p-type Zr0.5Hf0.5Co1−xRhxSb0.99Sn0.01 half-Heusler alloys

We show that Rh substitution at the Co site in Zr_0.5Hf_0.5Co_1−xRh_xSb_0.99Sn_0.01 (0≤x≤1) half-Heusler alloys strongly reduces the thermal conductivity with a simultaneous, significant improvement of the power factor of the materials. Thermoelectric properties of hot-pressed pellets of several compositions with various Rh concentrations were investigated in the temperature range from 300 to 775 K. The Rh “free” composition shows n-type conduction, while Rh substitution at the Co site drives the system to p-type semiconducting behavior. The lattice thermal conductivity of Zr_0.5Hf_0.5Co_1−xRh_xSb_0.99Sn_0.01 alloys rapidly decreased with increasing Rh concentration and lattice thermal conductivity as low as 3.7 W/m*K was obtained at 300 K for Zr_0.5Hf_0.5RhSb_0.99Sn_0.01. The drastic reduction of the lattice thermal conductivity is attributed to mass fluctuation induced by the Rh substitution at the Co site, as well as enhanced phonon scattering at grain boundaries due to the small grain size of the synthesized materials.     

Cation ordering in the fluorite-like transparent conductors In4+xSn3−2xSbxO12 and In6TeO12

The cation ordering in the fluorite-like transparent conductors In_4+xSn_3−2xSb_xO₁₂ and In₆TeO₁₂, was investigated by Time of Flight Neutron Powder Diffraction and X-ray Powder Diffraction (tellurate). The structural results including atomic positions, cation distributions, metal-oxygen distances and metal-oxygen-metal angles point to a progressive cation ordering on both sites of the Tb₇O₁₂-type structure with a strong preference of the smaller 4d¹⁰ cations (Sn⁴⁺, Sb⁵⁺, Te⁶⁺) for the octahedral sites. The corresponding increase of the overall structure-bonding anisotropy is analyzed in terms of the crystal chemical properties of the OM₄ tetrahedral network of the antistructure. The relationships between the M₇O₁₂ and the M₂O₃ bixbyite-type structures are explored. Within the whole series of compositions In_4+xM_3−xO₁₂ (M=Sn, Sb, Te) there exists an increase of the symmetry gap between the more symmetrical bixbyite structure and the M₇O₁₂ type. This is tentatively correlated with the progressive weakening of thermal stability of these compositions from Sn to Te via Sb.     

Synthesis and characterization of Zn1−xNixFe2O4 spinels prepared by a citrate precursor

Nanocrystalline single-phase samples of Zn_1−xNi_xFe₂O₄ ferrites (0<x<1) have been obtained via a soft-chemistry method based on citrate-ethylene glycol precursors, at a relatively low temperature (650 °C). The influence of the nickel and zinc contents as well as that of heat treatments were investigated by means of X-ray powder diffraction, Brunauer-Emmett-Teller (BET) surface area, scanning electron microscopy (SEM) and Fourier Transform Infrared (FTIR) Spectroscopy. Higher Ni content increases the surface areas, the largest one (∼20 m²/g) being obtained for NiFe₂O₄ annealed at 650 °C for 15 h. For all compositions, the surface area decreases for prolonged annealing at 650 °C and for higher annealing temperatures. Those results were correlated to the particle size evolution; the smallest particles (∼50 nm) observed in the NiFe₂O₄ sample (650 °C, 15 h) steadily increase as Ni ions were replaced by Zn, reaching ∼100 nm in the ZnFe₂O₄ sample (650 °C, 15 h). For all the Zn_1−xNi_xFe₂O₄ samples and, whatever the heat treatments was, the FTIR spectra show two fundamental absorption bands in the range 650-400 cm⁻¹, characteristics of metal vibrations, without any superstructure stating for cation ordering. The highest ν₁-tetrahedral stretching, observed at ∼615 cm⁻¹ in NiFe₂O₄, shifts towards lower values with increasing Zn, whereas the ν₂-octahedral vibration, observed at 408 cm⁻¹ in NiFe₂O₄, moves towards higher wavenumbers, reaching 453 cm⁻¹ in ZnFe₂O₄.