In and F MAS NMR study of (NH4)3InF6 phases

This study presents for the first time an NMR spectroscopic characterization of the room and high temperature phases of (NH₄)₃InF₆ using ¹⁹F and ¹¹⁵In as probe nuclei. The reversible phase transition to the cubic phase at 353 K was followed by MAS NMR in situ. Static NMR experiments of the room temperature phase and MAS NMR experiments of the high temperature phase allowed the determination of the NMR parameters of both nuclei. Finally, the scalar In-F coupling, rarely observed in solid state NMR, is evidenced in both room and high temperature phases of (NH₄)₃InF₆, and measured in the high temperature phase.     

Tris(dimethylamino)phosphine Selenide Complexes of Cadmium(II): Synthesis and Multinuclear (31P, 77Se,and 113Cd) NMR Characterization in Solution

The complexes CdL₄(ClO₄)₂ (1), CdL₂(NO₃)₂ (2), and CdL₂Cl₂ (3) (L = (Me₂N)₃P(Se)) have been prepared and characterized by elemental analysis, conductivity measurements, IR, and multinuclear (³¹P, ⁷⁷Se, and ¹¹³Cd) NMR spectroscopy. ³¹P and ⁷⁷Se NMR data were informative of changes associated with complex formation. The structure of the prepared complexes was further confirmed in solution by their ¹¹³Cd NMR spectra, which show a quintuplet for the perchlorate complex and a triplet for each of the nitrate and chloride complexes due, respectively, to coupling with four and two equivalent phosphorus atoms, consistent with a four coordinate tetrahedral geometry for the cadmium center. The NMR data are discussed and compared with those reported for related complexes.     

Structure and phase composition of nanocrystalline Ce1−xLuxO2−y

The microstructure and phase stability of nanocrystalline mixed oxide Lu_xCe_1−xO_2−y (x=0-1) are described. Nano-sized (3-4 nm) oxide particles were prepared by the reverse microemulsion method. Morphological and structural changes upon heat treatment in an oxidizing atmosphere were studied by transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman and Yb³⁺ emission spectroscopy, the latter ion being present as an impurity in the Lu₂O₃ starting material. Up to 950 °C, the samples were single phase, with structure changing smoothly with Lu content from fluorite type (F) to bixbyite type (C). For the samples heated at 1100 °C phase separation into coexisting F- and C-type structures was observed for 0.35<x<0.7. It was also found that addition of Lu strongly hinders the crystallite growth of ceria during heat treatment at 800 and 950 °C.     

Non-random cation distribution in hexagonal Al0.5Ga0.5PO4

Based on powder X-ray diffraction and ³¹P Magic Angle Spinning Nuclear Magnetic Resonance (MAS NMR) investigations of mixed phosphate Al_0.5Ga_0.5PO₄, prepared by co-precipitation method followed by annealing at 900 °C for 24 h, it is shown that Al_0.5Ga_0.5PO₄ phase crystallizes in hexagonal form with lattice parameter a=0.491(2) and c=1.106(4) nm. This hexagonal phase of Al_0.5Ga_0.5PO₄ is similar to that of pure GaPO₄. The ³¹P MAS NMR spectrum of the mixed phosphate sample consists of five peaks with systematic variation of their chemical shift values and is arising due to existence of P structural units having varying number of the Al³⁺/Ga³⁺ cations as the next nearest neighbors in the solid solution. Based on the intensity analysis of the component NMR spectra of Al_0.5Ga_0.5PO₄, it is inferred that the distribution of Al³⁺ and Ga³⁺ cations is non-random for the hexagonal Al_0.5Ga_0.5PO₄ sample although XRD patterns showed a well-defined solid solution formation.     

Tris(dialkylamino)phosphine Chalcogenide Complexes of Tin(IV) Chloride: A Multinuclear (31P, 77Se,and 119Sn) NMR Characterization

Abstract

Four octahedral complexes of the type SnCl₄.2L [L = (R₂N)₃P(E): E = Se; R = Me(1), Et(2) and E = S; R = Me(3), Et(4)] have been studied in solution by multinuclear (³¹P, ⁷⁷Se, and ¹¹⁹Sn) NMR spectroscopy. ³¹P and ⁷⁷Se NMR data were informative of changes associated with complex formation. The solution structure of the complexes was confirmed by their ¹¹⁹Sn NMR spectra that showed two triplet features for each complex, attributed to a mixture of the expected cis and trans isomers. The triplet signal is due to the coupling with two equivalent phosphorus atoms, consistent with an octahedral geometry around the tin center. In addition, density functional theory (DFT)/B3LYP calculations have been carried out to support the interpretations of NMR data. The results are discussed and compared with those reported for related complexes.

GRAPHICAL ABSTRACT      

Bis(Tetramethylselenophosphoramidoyl) Methylamine Complexes of Cd(Ii) and Zn(Ii): Synthesis and Multinuclear (31P, 77Se,and 113Cd) Nmr Characterization in Solution

Abstract

Five new complexes ZnL₂(ClO₄)₂ (1), CdL₂(ClO₄)₂ (2), CdL₂(BF₄)₂ (3), CdLCl₂ (4), and CdL(NO₃)₂ (5) [L = ((Me₂N)₂PSe)₂NMe] have been synthesized and characterized by elemental analysis, infrared (IR) and multinuclear (³¹P, ⁷⁷Se, and ¹¹³Cd), and nuclear magnetic resonance (NMR) spectroscopy. The ³¹P and ⁷⁷Se NMR data showed that the title ligand is coordinated in a bidentate fashion to the metal center via its both P=Se groups. The solution structure of the cadmium complexes was further confirmed by its ¹¹³Cd NMR spectra, which displayed a quintuplet for the perchlorate complex and a triplet for each of the nitrate and chloride complexes, respectively due to coupling with four (two ligands) and two (one ligand) equivalent phosphorus nuclei, consistent with a four-coordinate tetrahedral geometry for the cadmium center. The results are discussed and compared with the corresponding oxo and thio analogues.     

Ho3+/Yb3+共掺ZnO-Al2O3-GeO2-SiO2玻璃陶瓷的制备和上转换发光性质

综合ZnO-Al₂O₃-SiO₂系和锗酸盐玻璃陶瓷的优点,采用熔融-晶化法首次制备了Ho³⁺/Yb³⁺共掺以ZnAl₂O₄为主晶相的ZnO-Al₂O₃-GeO₂-SiO₂系玻璃陶瓷。因[GeO₄]四面体和[SiO₄]四面体都是玻璃网络形成体,讨论了GeO₂取代SiO₂对玻璃陶瓷样品硬度及发光性能的影响,最终确定GeO₂的取代量为10.55%（w/w）时,玻璃陶瓷综合性能最佳。在980 nm泵浦光的激发下,发现强的绿色（546 nm）和弱的红色（650 nm）上转换发光,并研究了不同Ho³⁺/Yb³⁺掺杂比对样品上转换发光的影响,最终结果表明当Ho³⁺/Yb³⁺掺杂比为1：11（n/n）时样品荧光强度最强,在绿色上转换发光材料方面具有潜在的应用。     

Tin(IV) Tetrachloride Complexes with Bis-(Dialkylamino)phosphoryl Fluoride: A Multinuclear (119Sn, 31P, 19F,and 1H) NMR Characterization in Solution

The two octahedral complexes SnCl₄·2(O)PF(NR₂)₂ (R = Me or Et) were prepared from reaction of SnCl₄ with the ligand (R₂N)₂P(O)F in anhydrous CHCl₃. The new adducts have been characterized by elemental analysis, IR, and multinuclear (¹¹⁹Sn, ³¹P, ¹⁹F, and ¹H) NMR spectroscopy. The NMR data show that the adducts exist in solution as a mixture of cis and trans isomers with markedly different proportions. When compared with previously described hexamethylphosphoramide (HMPA) and trimethylphosphate (TMPA) analogues, our results indicate that the cis isomer is the predominant species in solution. Low temperature ³¹P and ¹¹⁹Sn NMR spectra show that the compounds partially dissociate in dichloromethane.     

纳米CuFe2O4-rGO复合材料的制备及电化学性能

采用溶剂热法成功制备了纳米CuFe₂O₄-rGO复合材料。通过X射线衍射（XRD）,扫描电子显微镜（SEM）、透射电子显微镜（TEM）和电化学工作站对样品的结构、形貌及电容特性进行表征。结果表明,CuFe₂O₄纳米粒子均匀地分散在石墨烯片层间,其中CuFe₂O₄-20% rGO复合材料具有最优的电化学性能,当电流密度1 A·g^-1时,其比电容为1 952.5 F·g^-1,当电流密度为1 A·g^-1时,CuFe₂O₄-20% rGO复合材料经1 000次充放电后的比电容保持率为86.17%。     

Porosity, structural and fractal study of sol-gel TiO2-CeO2 mixed oxides

Sol-gel TiO₂-CeO₂ materials were synthesized at pH=3 employing HNO₃ as hydrolysis agent. Gels were thermally treated at 473, 673, 873, and 1073 K, respectively. Morphologies of the final substrates were studied via N₂ sorption, XRD and TEM. N₂ isotherms indicated a steady porosity in TiO₂-CeO₂ samples treated up to 873 K. Adsorption-desorption isotherms and TEM micrographs were used to perform fractal analyses of annealed samples. A dominant anatase phase was detected by XRD between 473 and 873 K while a rutile phase was evident at 1073 K. The presence of cerium conferred an increased thermal stability to the TiO₂ materials against particle sintering and pore collapse. The structure of cerium-doped anatase lattice was visualized through crystal simulation to investigate the possible substitution of Ti⁴⁺ by Ce⁺⁴ ions. This effect and the progressive segregation of CeO₂ crystals with temperature on the surface of TiO₂ grains lead to substrates of assorted morphologies.     

Polyol-mediated solvothermal synthesis and luminescence properties of CeF3, and CeF3:Tb nanocrystals

CeF₃ and CeF₃:Tb³⁺ nanocrystals were successfully synthesized through a facile and effective polyol-mediated route with ethylene glycol (EG) as solvent. Various experimental techniques including X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and photoluminescence (PL) spectra as well as decay dynamics were used to characterize the samples. The results indicated that the content of NH₄F and reactant concentrations were key factors in the product shape and size. Excessive NH₄F was necessary for the formation of hexagonal nanoplates. The specific morphology of product can be controlled by changing the NH₄F content and reactant concentrations. In addition, Tb³⁺ doped-CeF₃ sample shows strong green emission centered at 544 nm corresponding to the ⁵D₄-⁷F₅ transition of Tb³⁺. Due to the decrease of nonradiative decay rate, the lifetime of ⁵D₄ level of Tb³⁺ become longer gradually upon increasing the size of product.     

纳米CuFe_2O_4-rGO复合材料的制备及电化学性能

采用溶剂热法成功制备了纳米CuFe_2O_4-rGO复合材料。通过X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和电化学工作站对样品的结构、形貌及电容特性进行表征。结果表明,CuFe_2O_4纳米粒子均匀地分散在石墨烯片层间,其中CuFe_2O_4-20%rGO复合材料具有最优的电化学性能,当电流密度1 A·g~(-1)时,其比电容为1 952.5 F·g~(-1),当电流密度为1 A·g~(-1)时,CuFe_2O_4-20%rGO复合材料经1 000次充放电后的比电容保持率为86.17%。     

MAS-NMR investigations of the crystallization behaviour of lithium aluminum silicate (LAS) glasses containing P2O5 and TiO2 nucleants

Lithium aluminum silicate (LAS) glass of composition (mol%) 20.4Li₂O-4.0Al₂O₃-68.6SiO₂-3.0K₂O-2.6B₂O₃-0.5P₂O₅-0.9TiO₂ was prepared by melt quenching. The glass was then nucleated and crystallized based on differential thermal analysis (DTA) data and was characterized by ²⁹Si, ³¹P, ¹¹B and ²⁷Al MAS-NMR. XRD and ²⁹Si NMR showed that lithium metasilicate (Li₂SiO₃) is the first phase to c form followed by cristobalite (SiO₂) and lithium disilicate (Li₂Si₂O₅). ²⁹Si MAS-NMR revealed a change in the network structure already for the glasses nucleated at 550 °C. Since crystalline Li₃PO₄, as observed by ³¹P MAS-NMR, forms concurrently with the silicate phases, we conclude that crystalline Li₃PO₄ does not act as a nucleating agent for lithium silicate phases. Moreover, ³¹P NMR indicates the formation of M-PO₄ (M=B, Al or Ti) complexes. The presence of BO₃ and BO₄ structural units in all the glass/glass-ceramic samples is revealed through ¹¹B MAS-NMR. B remains in the residual glass and the crystallization of silicate phases causes a reduction in the number of alkali ions available for charge compensation. As a result, the number of trigonally coordinated B (BO₃) increases at the expense of tetrahedrally coordinated B (BO₄). The ²⁷Al MAS-NMR spectra indicate the presence of tetrahedrally coordinated Al species, which are only slightly perturbed by the crystallization.     

Cadmium(II) complexes with phosphine tellurides: synthesis and multinuclear (31P, 125Te,and 113Cd) NMR characterization in solution

New cadmium(II) complexes with phosphine telluride ligands of the type CdX₂(R₃PTe)_n [X?=?ClO₄^?, n?=?4: R?=?n-Bu (1), Me₂?N (2), C₅H₁₀?N (3), C₄H₈?N (4) or OC₄H₈?N (5); X?=?Cl^–, n?=?2: R?=?n-Bu (6), Me₂?N (7), C₅H₁₀?N (8), C₄H₈?N (9) or OC₄H₈?N (10)] have been synthesized and characterized by elemental analyses, IR and multinuclear (³¹P, ¹²⁵Te, and ¹¹³Cd) NMR spectroscopy. In particular, the solution structures of these complexes were confirmed by ¹¹³Cd NMR at low temperature, which displays a quintuplet for each of the perchlorate complexes and a triplet for each of the chloride complexes due to coupling with four and two equivalent phosphorus atoms, respectively, indicating a four-coordinate tetrahedral geometry for the metal center. These multiplet features were further accompanied by one bond Te–Cd couplings, clearly showing that the ligand is coordinated to the metal through tellurium. The results are discussed and compared with those obtained for closely related phosphine chalcogenide analogs.     

Microwave synthesis and photoluminescent properties of Sr2CeO4/Ln3+ (Ln = Er, Ho, Tm)

Sr₂CeO₄/Ln³⁺ (Ln = Er, Ho, Tm) phosphors were synthesized with the microwave radiation method for the first time. The luminescent properties of the samples were investigated and the up-conversion luminescence of Er³⁺, Ho³⁺ and Tm³⁺ doped Sr₂CeO₄ phosphors was observed. The spectra indicate that the energy transfer takes place from the triplet excited state of MLCT (metal-to-ligand charge transfer) state for Sr₂CeO₄ (sensitizer) to the rare earth ions (activator). __________ Translated from Journal of Hebei Normal University (Natural Science Edition), 2007, 31(2): 212–216 [译自: 河北师范大学学报 (自然科学版)]     

CaWO4:xEu3+,ySm3+,zLi+红色荧光粉的制备及光学性能

采用微波固相法制备了CaWO₄：xEu³⁺,ySm³⁺,zLi⁺红色荧光粉。测量样品的XRD图、激发谱、发射谱及发光衰减曲线,研究并分析了Eu³⁺、Sm³⁺、Li⁺的掺杂浓度,对样品微结构、光致发光特性、能量传递及能级寿命的影响。结果表明,Eu³⁺、Sm³⁺、Li⁺掺杂并未引起合成粉体改变晶相,仍为CaWO₄单一四方晶系结构。Eu³⁺、Sm³⁺共掺样品中,Sm³⁺掺杂为3%时,Sm³⁺对Eu³⁺的能量传递最有效。Li⁺掺杂起到了助熔剂和敏化剂的作用,使样品发光更强。在394 nm激发下,与CaWO₄：3%Eu³⁺样品比较,3%Eu³⁺、3%Sm³⁺共掺CaWO₄及3%Eu³⁺、3%Sm³⁺、1%Li⁺共掺CaWO₄样品的发光分别增强2倍及2.4倍。同一激发波长下,单掺Eu³⁺样品寿命最短,Sm³⁺、Eu³⁺共掺样品随Sm³⁺浓度增加,寿命先减小后增加,且掺杂了Li⁺的样品比不掺Li⁺的样品⁵D₀能级寿命有所增加。     

Quantum chemistry studies on the Ru-M interactions and the P NMR in [Ru(CO)3(Ph2Ppy)2(MCl2)] (M = Zn, Cd, Hg)

To study the Ru-M interactions and their effects on ³¹P NMR, complexes [Ru(CO)₃(Ph₂Ppy)₂] (py = pyridine) (1) and [Ru(CO)₃(Ph₂Ppy)₂MCl₂] (M = Zn, 2; Cd, 3; Hg, 4) were calculated by density functional theory (DFT) PBE0 method. Moreover, the PBE0-GIAO method was employed to calculate the ³¹P chemical shifts in complexes. The calculated ³¹P chemical shifts in 1-3 follow 2 > 3 > 1 which are consistent to experimental results, proving that PBE0-GIAO method adopted in this study is reasonable. This method is employed to predict the ³¹P chemical shift in designed complex 4. Compared with 1, the ³¹P chemical shifts in 2-4 vary resulting from adjacent Ru-M interactions. The Ru → M or Ru ← M charge-transfer interactions in 2-4 are revealed by second-order perturbation theory. The strength order of Ru → M interactions is the same as that of the P-Ru → M delocalization with Zn > Cd > Hg, which coincides with the order of ³¹P NMR chemical shifts. The interaction of Ru → M, corresponding to the delocalization from 4d orbital of Ru to s valence orbital of M²⁺, results in the delocalization of P-Ru → M, which decreases the electron density of P nucleus and causes the downfield ³¹P chemical shifts. Except 2, the back-donation effect of Ru ← M, arising from the delocalization from s valence orbital of M²⁺ to the valence orbital of Ru, is against the P-Ru → M delocalization and results in the upfield ³¹P chemical shifts in 4. Meanwhile, the binding energies indicate that complex 4 is stable and can be synthesized experimentally. However, as complex [Ru(CO)₃(Ph₂Ppy)₂HgCl]⁺5 is more stable than 4, the reaction of 1 with HgCl₂ only gave 5 experimentally.     

Er~(3+)∶V_(0.01)Y_(2.99)Al_5N_(0.01)F_(0.01)O_(11.98)/BiPO_4/Pt光催化剂的制备及其在降解废水中亚甲基蓝的应用

通过溶胶-凝胶法合成了上转换发光材料Er~(3+)∶V_(0.01)Y_(2.99)Al_5N_(0.01)F_(0.01)O_(11.98)(Er∶YAG),然后利用水热法合成了BiPO_4,再利用高温煅烧法合成了Er∶YAG/BiPO_4/Pt复合物光催化剂.通过使用X-射线粉末衍射仪(XRD),扫描电子显微镜(SEM),透射电子显微镜(TEM),光致发光光谱(PL)和上转换发射光谱对样品的组成、形貌及光学特征进行了表征.此外,还研究了不同甘油添加量、 Er∶YAG和BiPO_4的摩尔比例和复合温度及光催化剂的循环使用次数对Er∶YAG/BiPO_4/Pt复合物光催化剂活性的影响.实验结果显示Er∶YAG/BiPO_4/Pt复合物光催化剂具有高的光催化活性和较好的稳定性,它可以作为一种高效的光催化剂用于污水中有机污染物的处理.     

Ho3+/Yb3+共掺ZnO-Al2O3-GeO2-SiO2玻璃陶瓷的制备和上转换发光性质

综合ZnO-Al_2O_3-SiO_2系和锗酸盐玻璃陶瓷的优点,采用熔融-晶化法首次制备了Ho~(3+)/Yb~(3+)共掺以ZnAl_2O_4为主晶相的ZnO-Al_2O_3-GeO_2-SiO_2系玻璃陶瓷。因[GeO_4]四面体和[SiO_4]四面体都是玻璃网络形成体,讨论了GeO_2取代SiO_2对玻璃陶瓷样品硬度及发光性能的影响,最终确定GeO_2的取代量为10.55%(w/w)时,玻璃陶瓷综合性能最佳。在980 nm泵浦光的激发下,发现强的绿色(546 nm)和弱的红色(650 nm)上转换发光,并研究了不同Ho~(3+)/Yb~(3+)掺杂比对样品上转换发光的影响,最终结果表明当Ho~(3+)/Yb~(3+)掺杂比为1∶11(n/n)时样品荧光强度最强,在绿色上转换发光材料方面具有潜在的应用。     

Acid dissociation constants of uridine-5′-diphosphate compounds determined by phosphorus nuclear magnetic resonance spectroscopy and internal pH referencing

The acid dissociation constant (pK_a) of small, biological molecules is an important physical property used for investigating enzyme mechanisms and inhibitor design. For phosphorus-containing molecules, the ³¹P nuclear magnetic resonance (NMR) chemical shift is sensitive to the local chemical environment, particularly to changes in the electronic state of the molecule. Taking advantage of this property, we present a ³¹P NMR approach that uses inorganic phosphate buffer as an internal pH reference to determine the pK_a values of the imide and second diphosphate of uridine-5′-diphosphate compounds, including the first reported values for UDP-GlcNAc and UDP-S-GlcNAc. New methods for using inorganic phosphate buffer as an internal pH reference, involving mathematical correction factors and careful control of the chemical shift reference sample, are illustrated. A comparison of the newly determined imide and diphosphate pK_a values of UDP, UDP-GlcNAc, and UDP-S-GlcNAc with other nucleotide phosphate and thio-analogs reveals the significance of the monosaccharide and sulfur position on the pK_a values.