The nature of the orthorhombic to tetragonal phase transition in Sr1−xCaxMnO3

The orthorhombic-tetragonal phase transition in the perovskite series Sr_1−xCa_xMnO₃ 0.4?x?0.6 has been studied by synchrotron X-ray powder diffraction. At room temperature the Ca rich oxides x?0.45 have the orthorhombic Pbnm superstructure whereas Sr_0.6Ca_0.4MnO₃ is two phases with both tetragonal I4/mcm and orthorhombic Pbnm. Analysis of the octahedral tilts suggest the co-existence of these two phases is a consequence of a first-order I4/mcm to Pbnm transition. The evolution of the structure of Sr_0.5Ca_0.5MnO₃ with temperature is also described and this is found to evolve from orthorhombic to tetragonal and ultimately cubic.     

Charge and structural ordering in the brownmillerite phases: La1−xSrxMnO2.5 (0.2<x<0.4)

The topotactic reduction of La_1−xSr_xMnO₃ (0.2<x<0.4) perovskite phases to the corresponding La_1−xSr_xMnO_2.5 brownmillerite phases with NaH is described. Neutron and electron diffraction data show the x=0.25 and 0.2 phases adopt structures with an unusual ordered L-R-L-R alternation of twisted chains of Mn(II) tetrahedra within each anion-deficient layer. This is accompanied by Mn(II)/(III) charge ordering within the remaining MnO₆ octahedral layers. In contrast, the x=0.4 phase adopts a structure in which the twisted chains of tetrahedra are disordered.     

Crystal structure and electrical conductivity of lanthanum-calcium chromites-titanates La1−xCaxCr1−yTiyO3−δ (x=0-1, y=0-1)

Five series of perovskite-type compounds in the system La_1−xCa_xCr_1−yTi_yO₃ with the nominal compositions y=0, x=0-0.5; y=0.2, x=0.2-0.8; y=0.5, x=0.5-1.0; y=0.8, x=0.6-1.0 and y=1, x=0.8-1 were synthesized by a ceramic technique in air (final heating 1350 °C). On the basis of the X-ray analysis of the samples with (Ca/Ti)?1, the phase diagram of the CaTiO₃-LaCr^IIIO₃-CaCr^IVO₃ quasi-ternary system was constructed. Extended solid solution with a wide homogeneity range is formed in the quasi-ternary system CaCr^IVO₃-CaTiO₃-LaCr^IIIO₃. The solid solution La_{(1−x′−y)}Ca_(x′+y)Cr^IV_x′Cr^III_{(1−x′−y)}Ti_yO₃ exists by up to 0.6-0.7 mol fractions of CaCr^IVO₃ (x^′<0.6-0.7) at the experimental conditions. The crystal structure of the compounds is orthorhombic in the space group Pbnm at room temperature. The lattice parameters and the average interatomic distances of the samples within the solid solution ranges decrease uniformly with increasing Ca content. Outside the quasi-ternary system, the nominal compositions La_0.1Ca_0.9TiO₃, La_0.2Ca_0.8TiO₃, La_0.4Ca_0.6Cr_0.2Ti_0.8O₃ and La_0.3Ca_0.7Cr_0.2Ti_0.8O₃ in the system La_1−xCa_xCr_1−yTi_yO₃ were found as single phases with an orthorhombic structure. In the temperature range between 850 and 1000 °C, the synthesized single-phase compositions are stable at pO₂=6×10⁻¹⁶-0.21×10⁵ Pa. Oxygen stoichiometry and electrical conductivity of the separate compounds were investigated as functions of temperature and oxygen partial pressure. The chemical stability of these oxides with respect to oxygen release during thermal dissociation decreases with increasing Ca-content. At 900 °C and oxygen partial pressure 1×10⁻¹⁵-0.21×10⁵ Pa, the compounds with x>y (acceptor doped) are p-type semiconductors and those with x<y (donor doped) and x=y are n-type semiconductors. The type and level of electrical conductivity are functions of the concentration ratios of cations occupying the B-sites of the perovskite structures: [Cr³⁺]/[Cr⁴⁺] and [Ti⁴⁺]/[Ti³⁺]. The maximum electrical conductivity at 900 °C and pO₂=10⁻¹⁵ Pa was found for the composition La_0.1Ca_0.9TiO₃ (near 50 S/cm) and in air at 900 °C for La_0.5Ca_0.5CrO₃ (close to 100 S/cm).     

Synthesis and electrical conductivity of perovskite-type PrCo1−xMgxO3

Oxides in the system PrCo_1−xMg_xO₃ (x=0.0, 0.05, 0.10, 0.15, 0.20, 0.25) were synthesized by citrate technique and characterized by powder X-ray diffraction and scanning electron microscope. All compounds have a cubic perovskite structure (space group ). The maximum ratio of doped Mg in the system PrCo_1−xMg_xO₃ is x=0.2. Further doping leads to the segregation of Pr₆O₁₁ in PrCo_1−xMg_xO₃. The substitution of Mg for Co improves the performance of PrCoO₃ as compared to the electrical conductivity measured by a four-probe electrical conductivity analyzer in the temperature range from 298 to 1073 K. The substitution of Mg for Co on the B site may be compensated by the formations of Co⁴⁺ and oxygen vacancies. The electrical conductivity of PrCo_1−xMg_xO₃ oxides increases with increasing x in the range of 0.0-0.2. The increase in conductivity becomes considerable at the temperatures ?673 K especially for x?0.1; it reaches a maximum at x=0.2 and 1073 K. From x>0.2 the conductivity of PrCo_1−xMg_xO₃ starts getting lower. This is probably a result of the segregation of Pr₆O₁₁ in PrCo_1−xMg_xO₃ , which blocks oxygen transport, and association of oxygen vacancies. A change in activation energy for all PrCo_1−xMg_xO₃ compounds (x=0-0.25) was observed, with a higher activation energy above 573 K and a lower activation energy below 573 K. The reasons for such a change are probably due to the change of dominant charge carriers from Co⁴⁺ to Vö in PrCo_1−xMg_xO₃ oxides and a phase transition mainly starting at 573 K.     

Structural chemistry and magnetic properties of Pr3−xSr1+xCrNiO8

Polycrystalline samples of the n=1 Ruddlesden-Popper system Pr_3−xSr_1+xCrNiO₈ have been synthesized over the composition range 0.0<x?1.0 either by the ceramic method or from solution. They have been characterized by an appropriate combination of diffraction methods (X-ray, neutron and electron) and magnetometry (d.c. and a.c.). All compositions having x>0.1 adopt the tetragonal space group I4/mmm; Pr_2.9Sr_1.1CrNiO₈ adopts the orthorhombic space group Fmmm. There is no evidence of Cr/Ni cation ordering in any composition. A maximum in the zero-field cooled magnetic susceptibility is observed at a temperature T_f that decreases with increasing Sr content; 52?T_f (K)?13. The frequency dependence of T_f observed in a.c. susceptibility measurements, together with the analysis of neutron diffraction data, suggests that the atomic magnetic moments in these compositions adopt a spin-glass-like state below T_f.     

Oxygen permeability, thermal expansion and mixed conductivity of GdxCe0.8−xPr0.2O2−δ, x=0, 0.15, 0.2

The non-linear thermal expansion behaviour observed in Ce_1−yPr_yO_2−δ materials can be substantially controlled by Gd substitution. Coulometric titration shows that the charge compensation mechanism changes with increasing x, in the system Gd_xCe_0.8−xPr_0.2O_2−δ. For x=0.15, charge compensation is by vacancy formation and destabilises the presence of Pr⁴⁺. At x=0.2, further Gd substitution is charge compensated by additionally raising the oxidation state of Pr rather than solely the creation of further oxygen ion vacancies. Oxygen concentration cell e.m.f. measurements in an oxygen/air potential gradient show that increasing Gd content decreases ionic and electronic conductivities. Ion transference numbers measured under these conditions show a positive temperature dependence, with typical values t_o=0.90,0.98 and 0.80 for x=0,0.15 and 0.2, respectively, at 950 °C. These observations are discussed in terms of defect association. Oxygen permeation fluxes are limited by both bulk ambipolar conductivity and surface exchange. However, the composition dependent trends in permeability are shown to be dominated by ambipolar conductivities, and limited by the level of electronic conductivity. At the highest temperatures, oxygen permeability of composition x=0.2 approaches that of composition x=0, Ce_0.8Pr_0.2O_2−δ, with specific oxygen permeability values approximately 2×10⁻⁹ mol s⁻¹ cm⁻¹ at 950 °C, but offering much better thermal expansion properties.     

Solution precursor synthesis and magnetic properties of Eu1−xCaxTiO3

Europium titanate, EuTiO₃, is a paraelectric/antiferromagnetic cubic perovskite with T_N=5.5 K. It is predicted that compressive strain could induce simultaneous ferroelectricity and ferromagnetism in this material, leading to multiferroic behavior. As an alternative to epitaxial strain, we explored lattice contraction via chemical substitution of Eu²⁺ with the smaller Ca²⁺ cation as a mechanism to tune the magnetic properties of EuTiO₃. A modified sol-gel process was used to form homogeneously mixed precursors containing Eu³⁺, Ca²⁺, and Ti⁴⁺, and reductive annealing was used to transform these precursors into crystalline powders of Eu_1−xCa_xTiO₃ with x=0.00, 0.05, 0.10, 0.15, 0.25, 0.35, 0.50, 0.55, 0.60, 0.65, 0.80, and 1.00. Powder XRD data indicated that a continuous Eu_1−xCa_xTiO₃ solid solution was readily accessible, and the lattice constants agreed well with those predicted by Vegard's law. SEM imaging and EDS element mapping indicated a homogeneous distribution of Eu, Ca, and Ti throughout the polycrystalline sample, and the actual Eu:Ca ratio agreed well with the nominal stoichiometry. Measurements of magnetic susceptibility vs. temperature indicated antiferromagnetic ordering in samples with x≤0.60, with T_N decreasing from 5.4 K in EuTiO₃ to 2.6 K in Eu_0.40Ca_0.60TiO₃. No antiferromagnetic ordering above 1.8 K was detected in samples with x>0.60.     

Structural characterisation of the perovskite series SrxCa1−x−yNdyMnO3: Influence of the Jahn-Teller effect

The crystal structures of the perovskite manganites Sr_xCa_1−x−yNd_yMnO₃ with y=0.1 or 0.2 have been investigated using synchrotron X-ray powder diffraction. At room temperature the structures change from depending on the cation distribution, the different structures exhibiting different tilts of the MnO₆ octahedra. High temperature diffraction measurements demonstrate the presence of, an apparently continuous, isosymmetric I4/mcm to I4/mcm phase transition associated with the removal of long range orbital ordering. Heating the manganites to still higher temperatures results in a continuous transition to the cubic structure. A feature of such transitions is the continuous evolution of the octahedral tilt angle through the I4/mcm to I4/mcm phase transition. The orthorhombic structures do not exhibit orbital ordering and although a first order transition to the tetragonal structure is observed in Sr_0.4Ca_0.5Nd_0.1MnO₃, this high temperature tetragonal structure does not exhibit orbital ordering.     

Enhancement of magnetic ordering temperature in iron substituted ytterbium manganate (YbMn1−xFexO3)

Oxides of the type YbMn_1−xFe_xO₃; x≤0.3 showing multiferroic behavior have been synthesized by the solid state route. These oxides crystallize in the hexagonal structure known for the parent YbMnO₃ with the c/a ratio increasing with Fe substitution. The distortion of the MnO₅ polyhedra (tbp) decreases and the Mn-O-Mn bonds in the a-b plane become shorter with Fe-substitution. Magnetic ordering is observed from the low temperature neutron diffraction study. The compounds were found to be antiferromagnetic and the ordering temperature T_N increased from 82 K for pure YbMnO₃ to 95 K for YbMn_0.7Fe_0.3O₃. Variable temperature dielectric measurements (15-110 K) show an anomaly in the dielectric constant at temperatures close to the antiferromagnetic ordering temperature for all the compositions, showing a unique correlation between the magnetic and electric field. The increase in the ordering temperature in YbMn_1−xFe_xO₃ is explained on the basis of increase in covalence of Mn/Fe-O-Mn/Fe bonds (shorter) with iron substitution.     

Structural characterisation of the perovskite series Sr0.9−xCaxCe0.1MnO3: Influence of the Jahn-Teller effect

Fifteen perovskite-type compounds Sr_0.9−xCa_xCe_0.1MnO₃, x=0-0.9 in steps as fine as 0.05, have been synthesised by solid state methods, and the room temperature structures characterised using X-ray synchrotron powder diffraction. At low Ca contents (x?0.45) the structures are tetragonal in space group I4/mcm and at high Ca contents (x?0.55) the compounds are orthorhombic in space group Pbnm. At room temperature these two phases co-exist in the compound with x=0.5. XANES measurements show the Ce to be present as Ce⁴⁺ in all the oxides. High temperature structures are reported for selected members.     

Structural and magnetic properties of Pr18Li8Fe5−xMxO39 (M=Ru, Mn, Co)

A polycrystalline sample of Pr₁₈Li₈Fe₄RuO₃₉ has been synthesized by a solid state method and characterized by neutron powder diffraction, magnetometry and Mössbauer spectroscopy; samples of Pr₁₈Li₈Fe_5−xMn_xO₃₉ and Pr₁₈Li₈Fe_5−xCo_xO₃₉ (x=1, 2) have been studied by magnetometry. All these compounds adopt a cubic structure (space group , a₀∼11.97 Å) based on intersecting 〈111〉 chains made up of alternating octahedral and trigonal-prismatic coordination sites. These chains occupy channels within a Pr-O framework. The trigonal-prismatic site in Pr₁₈Li₈Fe₄RuO₃₉ is occupied by Li⁺ and high-spin Fe³⁺. The remaining transition-metal cations occupy the two crystallographically-distinct octahedral sites in a disordered manner. All five compositions adopt a spin-glass-like state at 7 K (Pr₁₈Li₈Fe₄RuO₃₉) or below.     

Positron lifetime study of Pr1−xCaxMnO3 (x=0.5, 0.3) during magnetic transition

We measured the positron lifetime in perovskite manganites Pr_1−xCa_xMnO₃ (x=0.3, 0.5). Two lifetime components were observed for each compound; they were attributed to the annihilation of free positrons and positrons trapped at the A-site vacancies. The positron lifetime at the A-site vacancies changed significantly during the antiferromagnetic transition in both the compounds, whereas it was constant around the charge-ordering transition. This change indicates that the electron distribution at the vacancies changed possibly due to the change in the electron distribution of neighboring oxygen atoms. This result indicates that positron lifetime measurements can provide unique information on electronic states during a spin-related phase transition in various oxide materials.     

Spin-glass behavior in Pr0.7Ca0.3CoO3 and Nd0.7Ca0.3CoO3

With a view to investigate the effect of small size of A-site cations on the magnetic properties of the rare earth cobaltates, Ln_1−xA_xCoO₃ (Ln=rare earth, A=alkaline earth), we have investigated Pr_0.7Ca_0.3CoO₃ and Nd_0.7Ca_0.3CoO₃ in detail. For this purpose, we have carried out low-field DC magnetization and ac susceptibility measurements including a study of magnetic relaxation and memory effects. Both Pr_0.7Ca_0.3CoO₃ and Nd_0.7Ca_0.3CoO₃ show frequency-dependent transitions at 70 and 55 K respectively in the ac susceptibility data, due to the onset of spin-glass like behavior. Their relaxation behavior exhibits aging effects. In addition, memory effects are found in the magnetization behavior. These characteristics establish spin-glass behavior in both these cobaltates, a behavior that is distinctly different from that of La_0.7Ca_0.3CoO₃ and La_0.5Sr_0.5CoO₃ which show well-defined ferromagnetic transitions, albeit without long-range ordering.     

Hexagonal perovskite-intergrowth manganates: Ln2Ca2MnO7 (Ln=La, Nd and Sm)

Two structures, all consisting of alternative stacking of hexagonal perovskite layer and graphite-like Ca₂O layer, were identified in Ln₂Ca₂MnO₇ systems (Ln=La, Nd and Sm). La₂Ca₂MnO₇ (1), crystallizing in the space group with the lattice constants a=5.62231(7)  Å and c=17.3192(4) Å, contains almost ideal close packed [LnO₃] arrays. While for the smaller rare earth cations, e.g., Nd₂Ca₂MnO₇ (2) and Sm₂Ca₂MnO₇ (3), the structure distorts to large unit cell (a′=2a and c′=c). Study of the substituted systems, LnLn′Ca₂MnO₇ (Ln or Ln′=La, Ce, Pr, Nd, Sm, Eu, Gd) and La_2−xSm_xCa₂MnO₇, shows a phase transformation from (1) to (2) at certain value of cation size. The MnO₆ octahedra in these compounds are isolated, thus the magnetic property is mainly paramagnetic.     

Relationship between interlayer hydration and photocatalytic water splitting of A′1−xNaxCa2Ta3O10·nH2O (A′=K and Li)

Partial replacement of alkaline metals in anhydrous KCa₂Ta₃O₁₀ and LiCa₂Ta₃O₁₀ was studied to control interlayer hydration and photocatalytic activity for water splitting under UV irradiation. A′_1−xNa_xCa₂Ta₃O₁₀·nH₂O (A′=K and Li) samples were synthesized by ion exchange of CsCa₂Ta₃O₁₀ in mixed molten nitrates at 400 °C. In K_1−xNa_xCa₂Ta₃O₁₀·nH₂O, two phases with the orthorhombic (C222) and tetragonal (I4/mmm) structures were formed at x?0.7 and x?0.5, respectively. Upon replacement by Na⁺ having a larger enthalpy of hydration (ΔH_h⁰), the interlayer hydration occurred at x?0.3 and the hydration number (n) was increased monotonically with an increase of x. Li_1−xNa_xCa₂Ta₃O₁₀·nH₂O showed a similar hydration behavior, but the phase was changed from I4/mmm (x<0.5, n∼0) via P4/mmm (x∼0.5, n∼1) to I4/mmm (x∼1.0, n∼2). The photocatalytic activities of these systems after loading 0.5 wt% Ni were quite different each other. K_1−xNa_xCa₂Ta₃O₁₀·nH₂O exhibited the activity increasing in consistent with n, whereas Li_1−xNa_xCa₂Ta₃O₁₀·nH₂O exhibited the activity maximum at x=0.77, where the rates of H₂/O₂ evolution were nearly doubled compared with those for end-member compositions (x=0 and 1).     

Neutron diffraction and magnetic study of the Nd0.7Pb0.3Mn1−xFexO3 (0?x?0.1) perovskites

The effect of Fe doping on the ferromagnetic Nd_0.7Pb_0.3Mn_1−xFe_xO₃ (x=0, 0.025, 0.05, 0.075, 0.1) phases has been studied in order to analyze the double-exchange interaction. The structural and magnetic study has been carried out by neutron powder diffraction and susceptibility measurements between 1.7 and 300 K. The substitution of Fe at the Mn site results in reductions in both the Curie temperature T_c and the magnetic moment per Mn ion without appreciable differences in the crystal structures. All the compounds crystallize in Pnma space group. The thermal evolution of the lattice parameters of the Nd_0.7Pb_0.3Mn_1−xFe_xO₃ (x=0.025, 0.05, 0.075) compounds shows discontinuities in volume and lattice parameters close to the magnetic transition temperature. Increasing amounts of Fe³⁺ reduces the double exchange interactions and no magnetic contribution for x=0.1 is observed. The magnetic structures of Nd_0.7Pb_0.3Mn_1−xFe_xO₃ (x=0, 0.025, 0.05, 0.075) compounds show that the Nd and Mn ions are ferromagnetically ordered.     

Thermoelectric properties of polycrystalline La1−xSrxCoO3

Thermoelectric properties of polycrystalline La_1−xSr_xCoO₃, where Sr²⁺ is substituted in La³⁺ site in perovskite-type LaCoO₃, have been investigated. Sr-doping increases the electrical conductivity (σ) of La_1−xSr_xCoO₃, and also decreases the Seebeck coefficient (S) for 0.01?x?0.40. A Hall coefficient measurement reveals that the increase in electrical conductivity arises from increases in both carrier concentration and the Hall mobility. The decrease in the Seebeck coefficient is caused by a decrease in carrier effective mass as well as increase in carrier concentration. The highest power factor (σS²) is 3.7×10⁻⁴ W m⁻¹ K⁻² at 250 K for x=0.10. The thermal conductivity (κ) is about 2 W m⁻¹ K⁻¹ at 300 K for 0?x?0.04, and increases for x?0.05 because of an increase in heat transport by conductive carrier. The thermoelectric properties of La_1−xSr_xCoO₃ are improved by Sr-doping, and the figure of merit (Z=σS² κ⁻¹) reaches 1.6×10⁻⁴ K⁻¹ for x=0.06 at 300 K (ZT=0.048). For heavily Sr-doped samples, the thermoelectric properties diminish mainly because of the decrease in the Seebeck coefficient and the increase in thermal conductivity.     

Phase segregation in the Gd1−xSrxFeO3−δ series

Gd_1−xSr_xFeO_3−δ ferrites have been studied by means of X-ray powder diffraction in the whole composition range. Single-phase solid solution is found for x<0.09 and for x>0.63. At intermediate Sr content, phase segregation takes place. Compounds with x?0.05 crystallize in the orthorhombic structure, space group Pbnm. Oxygen-deficient Gd_1−xSr_xFeO_3−δ with x?2/3 are cubic or nearly cubic. The oxygen vacancies stabilize the cubic phase for x=2/3 whereas highly oxidized samples show an orthorhombic distortion, which has not been observed earlier. Magnetic and electrical properties have been measured for the single-phase solid solutions. Gd_1−xSr_xFeO_3−δ compounds with x?2/3 order antiferromagnetically below ∼100 K. In the paramagnetic region, their susceptibility follows the Curie-Weiss law in all but SrFeO_2.96 compound. These ferrites show semiconducting behavior in the electrical transport likely related to atomic disorder. We find that the conductivity activation energy becomes larger by increasing either the Gd content or the oxygen vacancies.     

Magnetic properties of La0.5−xLnxSr0.5MnO3 (Ln=Pr, Nd, Gd and Y)

Magnetic and electron transport properties of four series of manganates of the composition La_0.5−xLn_xSr_0.5MnO₃ (Ln=Pr, Nd, Gd and Y) have been investigated to examine how the ferromagnetic metallic nature of the parent La compound changes over to antiferromagnetic insulating behavior, with change in Ln and x due to the associated changes in the A-site cation radius as well as the size disorder. When Ln=Pr and Nd, there is a transition from the tetragonal I4/mcm structure to the orthorhombic Immm and Imma structures at x=0.2 and 0.35, respectively. There is a gradual evolution of the properties from those of La_0.5Sr_0.5MnO₃ to those of Pr_0.5Sr_0.5MnO₃ or Nd_0.5Sr_0.5MnO₃ with increase in x. Thus, when x>0.2 and >0.35, respectively, the Pr- and Nd-substituted manganates show ferromagnetic transitions followed by antiferromagnetic transitions at low temperatures, with the ferromagnetic T_C decreasing with increasing x. The Gd and Y series of compounds are all orthorhombic and show a decrease in T_C with the increase in x, the ferromagnetism disappearing at high x. At a value of x corresponding to the A-site cation radius of Pr_0.5Sr_0.5MnO₃, the Gd and Y series of compounds exhibit ferromagnetism in the 250-300 K region and undergo an antiferromagnetic transition on cooling. The T_C−T_N gap is sensitive to the disorder arising from the size mismatch.     

Solvothermal synthesis and characterisation of La1−xAxMnO3 nanoparticles

The synthesis of La_1−xA_xMnO₃ (A=Ca, Sr, Ba) nanoparticles in nonaqueous solvents has been studied. For this solvothermal procedure benzyl alcohol and acetophenone were chosen as reaction media. After this treatment in mild conditions a precipitate was obtained, which, however, can be annealed to the crystalline perovskite structure. Our results show that acetophenone is more suited to obtain the clean pervoskite phase than benzyl alcohol.