Thermal evolution of V(III)-containing layered double hydroxides

A study is reported on the thermal evolution of Mg, V layered double hydroxides with interlayer carbonate anions and different Mg/V molar ratios (from 1 to 4). Decomposition in O₂ occurs at lower temperature than that in N₂; the stability of the layered structure decreases as the V content increases. Oxidation of layer V³⁺ cations occurs in the same temperature range as dehydroxylation and decarbonation. The nature of the crystalline phases formed upon calcination at high temperatures strongly depends on the Mg/V molar ratio in the initial solid.     

Synthesis and characterization of layered double hydroxides (LDH) intercalated with non-steroidal anti-inflammatory drugs (NSAID)

Layered double hydroxides (LDHs) with the hydrotalcite type structure and a Mg:Al ratio of two have been prepared, with salicylate or naproxen in the interlayer. Two synthetic routes have been used: reconstruction from a mildly calcined hydrotalcite-CO₃ precursor, and a coprecipitation method with chlorides of the metals. The solids have been characterized using several physicochemical techniques, i.e., powder X-ray diffraction, FTIR and ¹³C CP/MAS NMR spectroscopies and thermal analysis (thermogravimetric and differential thermal analyses). The gallery height determined is in all cases larger than the size of the drug, 11.5 Å for salicylate and 15.8 and 16.6 Å for naproxen, depending on the specific synthesis route followed. Experimental data suggest the anion molecules form a tilted bilayer, with the carboxylate groups pointing towards the brucite-like layers. The solids are stable up to 230 °C and their evolution from 350 °C upwards is very similar to that observed for a carbonate-containing hydrotalcite, forming mostly amorphous solids with a large specific surface area.     

Chromium and yttrium-doped magnesium aluminum oxides prepared from layered double hydroxides

Layered double hydroxides with the hydrotalcite-like structures, containing Mg²⁺ and Al³⁺, doped with Cr³⁺ and Y³⁺, have been prepared by precipitation at constant pH. The weight percentages of Cr³⁺ and Y³⁺ were 1, 2, or 3%, and 0.5 or 1%, respectively. Single phases were obtained in all cases, whose crystallinity decreased as the content in Cr and Y was increased. The solids have been characterised by element chemical analysis, powder X-ray diffraction, thermal analyses (differential, thermogravimetric and programmed reduction), FT-IR and UV–vis spectroscopies; the specific surface areas have been determined from nitrogen adsorption isotherms at −196 °C. Upon calcination at 1200 °C for 5 h in air all solids display a mixed structure (spinel and rock salt for MgO); these solids have also been characterised by these techniques and their chromatic coordinates (CIE – L^*a^*b^*) have been determined. Their pink colour makes these solids suitable for being used as ceramic pigments.     

Incorporation of rare-earth ions in Mg-Al layered double hydroxides: intercalation with an [Eu(EDTA)] chelate

Reaction of an aqueous slurry of an Mg₂Al-NO₃ layered double hydroxide with a four-fold excess of Na[Eu(EDTA)] gives a material which analyses for Mg_0.68Al_0.32(OH)₂[Eu(EDTA)]_0.10(CO₃)_0.11·0.66H₂O. The interlayer spacing of the material is 13.8 Å, corresponding to a gallery height of 9.0 Å, which accords with the maximal dimensions (9-10 Å) of the anion in metal-EDTA complex salts as determined by single crystal X-ray diffraction. Geometrical considerations show that the charge density on the layered double hydroxide layers is too high to be balanced by intercalation of [Eu(EDTA)]⁻ alone, necessitating the co-intercalation of carbonate ions which have a much higher charge density.     

Synthesis of Cd/(Al+Fe) layered double hydroxides and characterization of the calcination products

Layered double hydroxides (LDHs) containing Cd(II), Al(III), and Fe(III) in the brucite-like layers with different starting Fe/Al atomic ratios and with nitrate as counteranion have been prepared following the coprecipitation method at a constant pH value of 8. An additional Cd(II),Al(III)-LDH sample interlayered with hexacyanoferrate(III) ions has been prepared by ionic exchange at pH 9. The samples have been characterized by elemental chemical analysis, powder X-ray diffraction (PXRD), and FT-IR spectroscopy. Their thermal stability has been assessed by thermogravimetric and differential thermal analyses (TG-DTA) and mass spectrometric analysis of the evolved gases. The PXRD patterns of the solids calcined at 800 °C show diffraction lines corresponding to Cd(Al)O and spinel-type materials, which precise nature (CdAl₂O₄, Cd_1−xFe_2+xO₄, or Cd_xFe_2.66O₄) depends on location and concentration of iron in the parent material or precursor.     

Synthesis and intracrystalline oxidation of nitrite-intercalated layered double hydroxides

Nitrite-intercalated LDHs could be prepared by a two-stage process that involves coprecipitation in the presence of nitrite ions followed by stirring the product with excess of nitrite ions. The nitrite ion lies flat in these LDHs with its c₂-axis lying approximately perpendicular to the crystallographic c-axis. The interlayer nitrite ions in these LDHs could be quantitatively oxidized to nitrate ions using H₂O₂ solution. In the LDHs thus obtained the nitrate ion lies flat with its c₃-axis parallel to the crystallographic c-axis (D_3h symmetry) in the interlayer region resulting in lower basal spacing.     

Direct decarbonation of micrometer-scale layered double hydroxides without morphology damage

A direct decarbonation route without obvious morphology damage was developed for large micrometer-scale layered double hydroxides（LDHs）.First,we synthesized pure,hexagonal-shaped LDHs with lateral dimension of micrometer-size by the recently reported urea hydrolysis method.Then,using HNO₃-NaNO₃ mixed solution,the obtained LDH with carbonate anions in the interlayer（LDH_CO₃） was directly decarbonated to its nitrate form,LDH_NO₃,its morphology and particle size were still unchanged.Compared with the recently published two-step decarbonation method,the direct decarbonation reported herein is very convenient.     

Effect of added zinc on the properties of cobalt-containing ceramic pigments prepared from layered double hydroxides

Layered double hydroxides (LDHs) with the hydrotalcite-type structure containing Co and Al, or Zn, Co and Al in the brucite-like layers and carbonate in the interlayer have been prepared by coprecipitation. The Zn/Co molar ratio was kept to 1 in all samples, while the divalent/trivalent molar ratio was varied from 2/1 to 1/2. The samples have been characterised by element chemical analysis, powder X-ray diffraction, differential thermal and thermogravimetric analysis, temperature-programmed reduction and FT-IR spectroscopy. A single hydrotalcite-like phase is formed for samples with molar ratio 2/1, which crystallinity decreases as the Al content is increased, developing small amounts of diaspore and dawsonite and probably an additional amorphous phase. Calcination at 1200 °C in air led to formation of spinels; a small amount of NaAlO₂ was observed in the Al-rich samples, which was removed by washing. The nature of the spinels formed (containing Co^II, Co^III, Al^III and Zn^II) strongly depends on the cations molar ratio in the starting materials and the calcination treatment, leading to a partial oxidation of Co^II species to Co^III ones. Colour properties (L*a*b*) of the original and calcined solids have been measured. While the original samples show a pink colour (lighter for the series containing Zn), the calcined Co,Al samples show a dark blue colour and the Zn,Co,Al ones a green colour. Changes due to the different molar ratios within a given calcined series are less evident than between samples with the same composition in different series. These calcined materials could be usable as ceramic pigments.     

Tungstocobaltate-pillared layered double hydroxides: Preparation, characterization, magnetic and catalytic properties

A new polyoxometalate anion-pillared layered double hydroxide (LDH) was prepared by aqueous ion exchange of a Mg-Al LDH precursor in nitrate form with the tungstocobaltate anions [CoW₁₂O₄₀]⁵⁻. The physicochemical properties of the product were characterized by the methods of powder X-ray diffraction, elemental analysis, infrared spectroscopy, thermogravimetric analysis and cyclic voltammetry. It was confirmed that [CoW₁₂O₄₀]⁵⁻ was intercalated between the brucite-type layers of the LDHs without a change in the structure. Magnetic measurement shows the occurrence of antiferromagnetic interactions between the magnetic centers. The investigation of catalytic performance for this sample exhibits high activity for the oxidation of benzaldehyde by hydrogen peroxide.     

Carboxylate-intercalated layered double hydroxides aged under microwave-hydrothermal treatment

Carboxylate-intercalated (terephthalate, TA and oxalate, ox) layered double hydroxides (LDHs) are aged under a microwave-hydrothermal treatment. The influence of the nature of the interlayer anion during the ageing process is studied. Characterization results show that the microwave-hydrothermal method can be extended to synthesize LDHs with anions different than carbonate, like TA. LDH-TA compounds are stable under microwave irradiation for increasing periods of time and the solids show an improved order both in the layers and in the interlayer region as evidenced by powder X-ray diffraction (PXRD), ²⁷Al MAS NMR and FT-IR spectroscopy. Furthermore, cleaning of the surface through removal of some organic species adsorbed on the surface of the particles also occurs during the microwave-hydrothermal treatment. Conversely, although the expected increase in crystallinity is observed in LDH-ox samples, the side-reaction between Al³⁺ and ox is also enhanced under microwave irradiation, and a partial destruction of the structure takes place with an increase in the M²⁺/M³⁺ ratio and consequent modification of the cell parameters.     

Nickel-aluminum layered double hydroxides prepared via inverse micelles formation

Nickel-aluminum layered double hydroxides have been prepared by conventional coprecipitation and by coprecipitation in the presence of a surfactant. The solids have been characterised by several physicochemical techniques. Calcination leads to formation of homogeneously dispersed mixed oxides, which have been characterised as well. The colour properties (lightness and chromaticity coordinates) of both series of solids (layered precursors and calcined ones) have been measured. It has been found that both the preparation method and the calcination treatment have an important effect on the luminosity (whiteness/darkness) of the solids, although the effect on the precise chromaticity coordinates (green/red and blue/yellow) is less marked.     

Preparation of ultrathin membranes by layer-by-layer deposition of layered double hydroxide (LDH) and polystyrene sulfonate (PSS)

Nanofilms were prepared by consecutively alternating adsorption of Mg–Al (2:1) layered double hydroxide (LDH) and polysodium 4-styrenesulfonate (PSS). The charge density of oppositely charged materials strongly affect film properties like thickness and ordering. The specific charge of the colloid particles (LDH) and macromolecules was determined with the particle charge detector. The sequential build-up of the thin films was followed by spectrophotometry and X-ray diffraction. The surface morphology of the multilayers was characterized by atomic force microscopy. The influence of the charge density of the applied materials and of the mass ratio of LDH/PSS on the film thickness were studied.     

Enhanced thermal- and photo-stability of acid yellow 17 by incorporation into layered double hydroxides

2,5-dichloro-4-(5-hydroxy-3-methyl-4-(sulphophenylazo) pyrazol-1-yl) benzenesulphonate (DHSB) anions, namely acid yellow 17 anions, have been successfully intercalated into Zn-Al layered double hydroxides (LDH) to produce a novel organic-inorganic pigment by a simple method involving separate nucleation and aging steps (SNAS), and the dye-intercalated LDH was analyzed by various techniques, e.g., XRD, SEM, FT-IR, TG-DTA and ICP. The d-spacing of the prepared LDH is 2.09 nm. Furthermore, the incorporation of the DHSB aims to enhance the thermal- and photo-stability of the guest dye molecule, for example, the less color change after accelerated thermal- and photo-aging test.     

含Fe、Co、Ni的LDHs为催化剂前体生长碳纳米管

分别以具有相似Fe、Co、Ni含量的层状双金属氢氧化物（LDHs）为催化剂前体,用化学气相沉积的方法生长碳纳米管（CNTs）。 催化剂由LDHs焙烧还原得到。 通过X射线衍射（XRD）、扫描电子显微镜（SEM）、透射电子显微镜（TEM）及拉曼光谱（Raman）测试技术对LDHs及其焙烧产物的结构、CNTs的形貌和结构进行了研究。 结果表明,3种催化剂生长的CNTs均为多壁结构;其中Co催化剂活性较低,生长CNTs的管径较细、石墨化程度较高;Ni催化剂的活性较高,生长CNTs的密度较大、管壁较厚、石墨化程度较差;Fe催化剂的活性介于Co和Ni之间。 催化剂活性及CNTs的密度可以由生长CNTs的结构来解释。     

Mesoporous mixed metal oxides derived from P123-templated Mg-Al layered double hydroxides

We report the preparation of mesoporous mixed metal oxides (MMOs) through a soft template method. Different amounts of P123 were used as structure directing agent to synthesize P123-templated Mg-Al layered double hydroxides (LDHs). After calcination of as-synthesized LDHs at 500 °C, the ordered mesopores were obtained by removal of P123. The mesoporous Mg-Al MMOs fabricated by using 2 wt% P123 exhibited a high specific surface area of 108.1 m²/g, and wide distribution of pore size (2-18 nm). An investigation of the “memory effect” of the mesoporous MMOs revealed that they were successfully reconstructed to ibuprofen intercalated LDHs having different gallery heights, which indicated different intercalation capacities. Due to their mesoporosity these unique MMOs have particular potential as drug or catalyst carriers.     

Structure-property relationships of new polystyrene nanocomposites prepared from initiator-containing layered double hydroxides of zinc aluminum and magnesium aluminum

Polystyrene/layered double hydroxides (PS/LDHs) nanocomposites were prepared by free radical polymerization of styrene monomer in the presence of LDHs intercalated with 4,4′-azobis(4-cyanopentanoate) anions (LDH-ACPA). XRD and ATR-IR are used to confirm that the materials produced are layered and the presence of the azo-initiator anions in these LDHs. These LDHs were used successfully to polymerize styrene and both XRD and TEM images of the composites support the formation of a mixed exfoliated-intercalated nanocomposite for ZnAl-ACPA but a microcomposite for MgAl-ACPA. The magnesium-containing LDHs decreased the glass transition temperature (T_g) of the composites while ZnAl-ACPA did not affect T_g significantly. The T_g depression is related to enhanced polymer dynamics due to the extra free volume at the LDH additive-polymer interface. A reduction in the onset of thermal decomposition temperature was observed in PS/LDH compared to neat PS, likely due to the early decomposition of the LDH. The fire performance, as evaluated by the cone calorimeter, reveal that PS-ZnAl-ACPA shows enhanced fire properties compared to PS-MgAl-ACPA.     

Synthesis and properties of Mg2Al layered double hydroxides containing 5-fluorouracil

A pharmaceutically active compound, 5-fluorouracil (5-FU) has been firstly intercalated into layered double hydroxide with the restructure method. Powder X-ray diffraction and spectroscopic analysis indicate that 5-FU molecule is stabilized in the host interlayer by electrostatic interaction and intermolecular interaction, and that the orientation of 5-FU is different when changing the pattern of aging treatment or the swelling agent. The release studies show that a rapid release of the drug during the first 40 min is followed by a more sustained one, and that the total amount of drug released from hybrid material into the aqueous solution is almost 87% and 74% at pH 4 and 7, respectively. The studies mentioned above suggest that layered double hydroxide might be used as the basis of a tunable drug delivery carrier.     

Synthesis and UV absorption properties of 2,3-dihydroxynaphthalene-6-sulfonate anion-intercalated Zn-Al layered double hydroxides

An organic UV absorbent has been intercalated into a layered double hydroxide (LDH) host by ion exchange of a Zn-Al-LDH-nitrate precursor with a solution of 2,3-dihydroxynaphthalene-6-sulfonic acid (DNSA) sodium salt in water. After intercalation of the UV absorbent, the powder X-ray diffraction (XRD) pattern shows that the interlayer distance in the LDHs increases from 0.90 to 1.59 nm. The possible structure is that the interlayer DNSA anions arrange in a monolayer and in a perpendicular orientation toward the hydroxide layers. Infrared spectra and TG-DTA curves reveal the presence of a complex system of supramolecular host-guest interactions between layers. The thermal stability of the intercalated UV absorbent was investigated by TG-DTA and it was found that this material is more stable than the original organic UV absorbent at high temperature, showing that the thermostability is markedly enhanced after intercalation into the LDH host. The UV absorbent-intercalated LDHs exhibit excellent UV photostability in polypropylene composites.     

Synthesis and characterization of layered double hydroxides with a high aspect ratio

A new route for synthesis of Mg/Al layered double hydroxide (Mg₆Al₂(OH)₁₆(CO₃)·4H₂O) has been introduced, which can be considered as a modified calcination-rehydration method. Under the hydrothermal conditions, LDHs with a high aspect ratio were synthesized and characterized by inductively coupled plasma-atom emission spectrometer (ICP-AES), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), thermal measurement (TG-DTG) and scanning electron microscopy (SEM). XRD patterns display the crystalline enhanced with the increase of hydrothermal temperature and aging time. TG-DTG curves show the more stable LDHs were synthesized at higher temperature. SEM images indicate the lateral size of the synthesized LDHs locates at ca. 1-6 μm and the thickness at ca. 35-60 nm. And the particle size depends strongly on the treatment temperature and aging time. A buffer solution consisted of HCO₃⁻ and CO₃²⁻ keeps the pH of reaction system in a certain range and offers a low supersaturated reaction circumstance. This is of high importance for the formation of LDHs with a high aspect ratio.     

Hydrophobic layered double hydroxides (LDHs): Selective adsorbents for liquid mixtures

 The external and internal surface area of the calcium aluminum double hydroxide [Ca₂Al(OH)₆] NO₃ ⋅ 2H₂O were hydrophobized by the anionic surfactants sodium dodecylsulfate and sodium dodecyl-benzene sulfonate. The adsorption behavior towards liquid mixtures (benzene/n-heptane and n-propanol/ toluene) was studied by determining the surface excess adsorption isotherms, the heats of immersion in these liquids, and the basal spacing, i.e. the expansion of the interlayer space. Both hydrophobic layered double hydroxides (LDHs) adsorbed n-hep-tane, benzene, toluene, and n-pro-panol between the layers with considerable increase of the basal spacing. Interlamellar swelling of the hydrophobizised LDHs in n-heptane was fundamentally different to the behavior of hydrophobized 2 : 1 clay minerals (smectites, vermiculites). The surface excess isotherms for benzene/ heptane mixtures were U-shaped and indicate preferential adsorption of benzene. Dodecylbenzene sulfonate double hydroxide preferentially adsorbed propanol from n-propanol/ toluene mixtures but the dodecyl-sulfate derivative adsorbed both compounds. Received: 23 January 1997 Accepted: 10 February 1997