On the synthesis of hypericin by oxidative trimethylemodin anthrone and emodin anthrone dimerization: Isohypericin

Summary The base catalyzed oxidative dimerization of emodin anthrone exclusively yields hypericin. However, on oxidative dimerization of trimethylemodinanthrone a mixture of hexamethylhypericin and hexamethylisohypericin was obtained. Chromatographic separation of the hexabenzoyl derivatives was achieved, and by saponification about equal amounts of hypericin and isohypericrin were produced. Isohypericin could be characterized for the first time by its spectroscopic data and its protonation and deprotonationpK _a andpK _a ^* values.

---

Zur Synthese von Hypericin durch oxidative Dimerisierung von Trimethylemodinanthron und Emodinanthron: Isohypericin

Zusammenfassung Die basenkatalysierte oxidative Dimerisierung von Emodinanthron liefert ausschließlich Hypericin. Oxidative Dimerisierung von Trimethylemodinanthron ergibt jedoch ein Gemisch von Hexamethylhypericin und Hexamethylisohypericin. Die Hexabenzoylderivate wurden chromatographisch getrennt, und Hypericin und Isohypericin konnten aus diesen Derivaten durch Verseifung freigesetzt werden. Isohypercin konnte erstmals durch seine spektroskopischen Daten und seine Protonierungs- und Deprotonierungs-pK _aundpK _a ^* -Werte charakterisiert werden.

     

Copper(II) catalyzed aromatization of tetrahydrocarbazole: An unprecedented protocol and its utility towards the synthesis of carbazole alkaloids

An efficient protocol for the aromatization of tetrahydrocarbazole is described by using catalytic copper(II) chloride dihydrate in DMSO. This newly established methodology has utilized towards the synthesis of naturally occurring carbazole alkaloids, namely 3-methylcarbazole, 3-formyl carbazole, glycozoline, glycozolicine and clauszoline-K. In addition, the protocol is generalized for the aromatization of N-substituted tetrahydrocarbazole, 1,2,3,4-tetrahydroquinoline, 1,2,3,4-tetrahydroisoquinoline and 1,2,3,4-tetrahydro β-carboline to give the corresponding heteroaromatic compounds from very good to excellent yield. Moreover, this method has been proven to be tolerant to a broad range of functional groups with excellent yields.     

First application of hexaaquaaluminium(III) tetrafluoroborate as a mild, recyclable, non-hygroscopic acid catalyst in organic synthesis: a simple and efficient protocol for the multigram scale synthesis of 3,4-dihydropyrimidinones by Biginelli reaction

For the first time hexaaquaaluminium(III) tetrafluoroborate has been used as a mild acid catalyst in organic synthesis. A simple method of its preparation based on the reaction of aluminium triisopropoxide and tetrafluoroboric acid in isopropanol afforded catalyst of high purity and activity. The three-component Biginelli condensation of acetoacetate esters, urea and aldehydes catalyzed by 10 mol % of [Al(H₂O)₆](BF₄)₃ in refluxing acetonitrile afforded 3,4-dihydropyrimidonones in good to high yields on multigram scales. The tolerance to acid sensitive reactants such as thienyl and furyl carbaldehydes, applicability to sterically hindered β-ketoesters and simple recyclability without losing catalytic activity make this catalyst as good replacement to literature methods. The mechanism of the reaction includes formation of the so called ‘ureido-crotonate’ rather than corresponding acylimino intermediate as found with Brønsted type catalysts.     

Tin(II) Chloride Dihydrate Catalyzed Groebke Condensation: An Efficient Protocol for the Synthesis of 3-Aminoimidazo[1,2-a]pyridines

The ability of tin(II) chloride dihydrate as a catalyst to promote the three-component condensation reaction from a diversity of aromatic aldehydes, 2-aminopyridines and isonitriles at room temperature is described. This methodology affords a number of 3-aminoimidazo[1,2-a]pyridines in the presence of tin(II) chloride dihydrate as a new and mild Lewis acid catalyst in the multi-component reaction in reasonable yields and short reaction time without any significant optimization of the reaction conditions.     

Simple,Convenient Method for the Synthesis of Substituted Furan-2(5H)-one Derivatives Using Tin(II) Chloride

Furan-2(5H)-one derivatives have been synthesized by a simple, efficient, one-pot, three-component condensation of anilines, dimethylacetylenedicarboxylate, and aromatic aldehydes in the presence of a catalytic amount of tin(II) chloride in excellent yields.     

Efficient and Reusable Sn(II)‐containing Imidazolium‐based Ionic Liquid as a Catalyst for the Oxidation of Benzyl Alcohol

A simple and efficient catalytic system [BBIM]Br–SnCl₂ for the oxidation of benzyl alcohol using hydrogen peroxide as the oxidant has been developed. Reaction conditions such as the catalyst dose, the solvents, reaction temperature, reaction time, and the amount of hydrogen peroxide were investigated. The optimum reaction conditions identified were 0.11 g of catalyst, no solvent, 65°C, 15 min, and 2 mmol of hydrogen peroxide. Oxidation of various alcohols was also investigated under the optimized conditions. The catalyst [BBIM]Br–SnCl₂ can be easily recovered and reused for six reaction runs without significant loss of catalytic activity, because the Sn species of the catalyst can be coordinated with the imidazole ring of the ionic liquid. The reused catalyst was further characterized by Fourier transform infrared spectroscopy to evaluate its chemical properties. The results proved that the [BBIM]Br–SnCl₂ catalyst was stable and reusable for the oxidation reactions. A possible mechanism for the oxidation of benzyl alcohol to benzaldehyde is proposed.     

羟基磷灰石固载路易斯酸催化三糖转化为乳酸酯

采用浸渍法制备了羟基磷灰石(HAP)负载的路易斯酸SnCl2和SnCl4催化剂.它们在三糖在醇溶液中转化为乳酸酯反应中表现出一定的催化活性.在最佳的反应条件下,SnCl2/HAP催化1,3-二羟丙酮在正丁醇溶液中转化为乳酸正丁酯,收率高达73.5%.     

Diethyl acetonedicarboxylate — a precursor for the synthesis of new substituted 4-aminoquinolines and fused 4-aminopyridines

Summary The reaction of cyclic enaminonitriles1 with diethyl acetonedicarboxylate (2) affords fused 4-amino-3-ethoxycarbonyl-2-ethoxycarbonylmethyl-pyridines4. The course of the reaction and the yield of cyclic products were promoted by tin(IV)chloride. N-substituted diethyl 3-aminoglutaconates3 seem to be intermediates of the cyclization reaction.Dedicated to Prof.Milan Kratochvil on the occasion of his 70th birthday     

Molecular sieves-supported palladium(II) catalyst: Suzuki coupling of chloroarenes and an easy access to useful intermediates for the synthesis of irbesartan, losartan and boscalid

Palladium(II) chloride supported on 4 Å molecular sieves efficiently catalyzes the Suzuki coupling reactions of chlorobenzenes in presence of tetrabutylammonium bromide without any ligand. The useful intermediates for the synthesis of bioactive compounds such as irbesartan, and losartan have been prepared in one step following this reaction. The preparation of this catalyst is very simple. The FE-SEM image shows a cube shape ordered structure. The catalyst does not exhibit any nanoparticles as indicated by TEM. EDS and XPS demonstrate anchoring of Pd on molecular sieves in +2 oxidation state. This heterogeneous catalyst is stable, non-air sensitive and recyclable.     

Hexachloroethane: a highly efficient reagent for the synthesis of chlorosilanes from hydrosilanes

A new and efficient chlorination protocol is presented for the preparation of chlorosilanes from hydrosilanes. A variety of chlorinating agents in combination with palladium(II) chloride as the catalyst are examined. Among them, hexachloroethane is found to be the best choice, furnishing the desired product in good to quantitative yields under mild conditions. Various hydrosilanes are used as starting materials to explore the scope of this reaction.     

2-Iodo benzoic acid: An unconventional precursor for the one pot multi-component synthesis of quinoxaline using organo Cu (II) catalyst

This is the first reported, unconventional, efficient strategy for the synthesis of quinoxaline from 2 to iodo benzoic acid and sodium azide in presence of organo Cu (II) catalyst. Herein, a very simple, versatile one pot multi-component protocol for the synthesis of biologically active compound, quinoxaline has been described via Schmidt reaction and the nucleophilic substitution reaction. The isolated compounds were characterized by 1H NMR, 13C NMR. Our reported organo catalyst was characterized by single crystal XRD, SEM.     

Sonochemical syntheses of a straw-like nano-structure two-dimensional mixed-ligand zinc(II) coordination polymer as precursor for preparation of nano-sized ZnO

Straw-like nano-structure of a new mixed-ligand Zn(II) two-dimensional coordination polymer, {[Zn(μ-4,4′-bipy)(μ-3-bpdb)(H₂O)₂](ClO₄)₂·4,4′-bipy·3-bpdb·H₂O}_n (1) {4,4′-bipy = 4,4′-bipyridine and 3-bpdb = 1,4-bis(3-pyridyl)-2,3-diaza-1,3-butadiene}, was synthesized by a sonochemical method. The new nano-structure was characterised by scanning electron microscopy, X-ray powder diffraction, IR spectroscopy and elemental analyses. Compound 1 was structurally characterised by single crystal X-ray diffraction and consists of two-dimensional polymeric units. ZnO nanoparticles were obtained by calcination of compound 1 at 500 °C under air atmosphere and were characterised by X-ray diffraction (XRD) and scanning electron microscopy (SEM).     

PTSA-catalyzed tandem cyclization protocol for the stereoselective total synthesis of obolactone

Stereoselective total synthesis of obolactone by the Brønsted acid (PTSA) mediated tandem cyclization of the appropriately substituted diketone in one-pot in a highly selective and efficient manner is reported.     

一个嫁接有羧酸羟基乙基酯的二吡啶吩嗪Ru(II)配合物的合成、与DNA的相互作用以及溶剂变色性质的研究

合成并表征了一个新的Ru(II)配合物[Ru(bpy)₂(hedppc)](ClO₄)₂ {bpy＝2,2'-联吡啶, hedppc＝二联吡啶[3,2-a: 2',3'-c]吩嗪-11-羧酸(2-羟乙基)酯}. 通过紫外-可见吸收光谱、与溴化乙锭竞争实验、粘度测量和DNA裂解实验研究了配合物与小牛胸腺DNA的相互作用性质. 结果表明配合物以插入模式与DNA键合,键合常数K_b＝(6.99±1.34)×10⁶ mol^－1•L (s＝2.03±0.04)与母体配合物[Ru(bpy)₂ (dppz)]^2＋相近,但光致发光和溶剂变色等光学性质与[Ru(bpy)₂ (dppz)]^2＋有明显的差别.     

Nano-sized Cu(II) and Zn(II) complexes and their use as a precursor for synthesis of CuO and ZnO nanoparticles: A study on their sonochemical synthesis,characterization, and DNA-binding/cleavage,anticancer, and antimicrobial activities

Two new divalent copper (C1) and zinc (C2) chelates having the formulae [M(PIMC)₂] (where M = Cu(II), Zn(II) and PIMC = Ligand [(E)-3-(((3-hydroxypyridin-2-yl)imino)methyl)-4H-chromen-4-one] were obtained and characterized by several techniques. Structures and geometries of the synthesized complexes were judged based on the results of alternative analytical and spectral tools supporting the proposed formulae. IR spectral data confirmed the coordination of the ligands to the copper and zinc centers as monobasic tridentate in the enol form. Thermal analysis, UV-Vis spectra and magnetic moment confirmed the geometry around the copper center to be tetrahedral, square pyramidal and octahedral. Study of the binding ability of the synthesized compounds with Circulating tumor DNA (CT-DNA) bas been evaluated applying UV-Vis spectral titration and viscosity measurements. The copper and zinc oxides were achieved from the copper and zinc nano-particles structures Schiff base complexes as the raw material after calcination for 5 hr at 600°C. On the other hand, synthesized of C1 and C2 NPs were used as suitable precursors to the preparation of CuO and ZnO NPs. Finally, the synthesized of the two complexes exhibited enhanced activity against the tested bacterial (Staphylococcus aureus and Escherichia Coli) and fungal strains (Candida albicans and Aspergillus fumigatus) as compared to HPIMC. Among all these synthesized compounds, C1 exhibits good cleaving ability compared to other newly synthesized C2.     

The nature of the salt error in the Sn(II)-reduced molybdenum blue reaction for determination of dissolved reactive phosphorus in saline waters

Sn(II) is a well-known reductant used in the formation of phosphomolybdenum blue for the determination of dissolved reactive phosphorus (DRP) in waters because it provides rapid and quantitative reduction. However, in saline waters, this method suffers from a salt error which causes a significant decrease in sensitivity. This phenomenon has never been adequately explained in the literature. The Murphy and Riley method, which uses Sb(III) and ascorbic acid for the reduction step, is preferred for DRP determination in saline waters because it is unaffected by salinity, but it exhibits a sensitivity approximately 30% lower than that when Sn(II) is used as the reductant without Cl⁻ interference. This study investigates the processes causing the salt error and possible ways of minimizing it, so that the benefits of Sn(II) reduction on the molybdenum blue reaction rate and sensitivity may be exploited in the determination of low levels of DRP in marine and estuarine waters. It has been established that the salt error is caused by the formation of Sn(IV) chloro-complexes which compete with the formation of Sn(IV)-substituted phosphomolybdenum blue, forcing the reaction to proceed via the much slower, less favourable process of direct reduction that occurs in methods using organic reductants such as ascorbic acid.     

Microwave assisted,Ca(II)-catalyzed Ritter reaction for the green synthesis of amides

An efficient solvent-free synthesis of amides by Ca(II) catalyzed Ritter reaction has been reported under microwave irradiation. This green protocol tolerates the substrate diversity and delivers the high yielding amides with minimal loading of inexpensive and more abundant Ca(II) catalyst.     

ZrCl4 as a mild and efficient catalyst for the one-pot conversion of TBS and THP ethers to acetates

A mild, efficient and chemoselective method has been developed for the direct transformation of tert-butyldimethylsilyl and tetrahydropyranyl protected alcohols into the corresponding acetates with acetic anhydride and zirconium(IV) chloride as the catalyst in acetonitrile, in a one-pot reaction with high yields and short reaction times. This method has been applied to a variety of substrates.     

Gallium(III) chloride-catalyzed three-component coupling of naphthol, alkyne and aldehyde: a novel synthesis of 1,3-disubstituted-3H-benzo[f] chromenes

Three-component coupling of naphthol, alkyne and aldehyde has been achieved in the presence of 10 mol % gallium(III) chloride in toluene under reflux conditions to afford the corresponding 1,3-disubstituted-3H-benzo[f]chromenes in good yields. This is the first example on the preparation of chromenes from naphthol, alkyne and aldehyde.     

Design,preparation and characterization of Cu/GA/Fe3O4@SiO2 nanoparticles as a catalyst for the synthesis of benzodiazepines and imidazoles

The synthesis and characterization of an efficient and reusable nanocatalyst, Cu/GA/Fe₃O₄@SiO₂, obtained by ultrasonic‐assisted grafting of guanidineacetic acid on modified Fe₃O₄@SiO₂ core–shell nanocomposite spheres and subsequent immobilization of Cu(II), are described. The catalyst was characterized by means of X‐ray diffraction, scanning and transmission electron microscopies, energy‐dispersive X‐ray spectroscopy, elemental analysis, thermogravimetric analysis, Fourier transform infrared spectroscopy, vibrating sample magnetometry and inductively coupled plasma optical emission spectrometry. The prepared nanocatalyst facilitated an efficient and straightforward friendly procedure for the synthesis of benzodiazepines and imidazoles in ethanol and under solvent‐free conditions, respectively. The nanocatalyst can be easily recovered using a magnet and reused several times without any significant loss of activity. Copyright © 2016 John Wiley & Sons, Ltd.