Halo Structure of Nucleus ^23Al

The recently measured reaction cross section of ^23Al is analysed in the Glauber model with an optical limit or few-body approach.It is found that the conventional fixed core-plus-nucleon model for halo nuclei is unable to explain the observed abnormally large reaction cross section of ^23Al by any selection of the halo nucleon configurations.The reaction cross section of ^23Al can be described when the core size is enlarged,although the Coulomb barrier lagely hinders the formation of a halo sturcture for proton-rich nuclei.This is consistent with the case in s-d shell neutron-rich nuclei,where an enlarged core was proposed to explain both the reaction cross section and longitudinal momentum distribution data.     

Molecular dynamics simulations of the melting of Al–Ni nanowires

Molecular dynamics (MD) simulations were performed to investigate the influence of nickel (Ni) composition and nanowire thickness on the thermal properties of Al-x%Ni (at%) nanowires using the embedded atom model (EAM) potential. The melting of the nanowire was characterised by studying the temperature dependence of the cohesive energy and mean square displacement. The effect of the nanowire thickness on the cohesive energy, melting temperature, heat capacity as well as latent heat was studied in canonical ensemble. Moreover, the crystal stability of Al, Al-20%Ni, Al-40%Ni, Al-60%Ni, Al-80%Ni, Al₃Ni, Ni₃Al and Ni nanowires was studied at different temperatures using mean square displacement and cohesive energy.     

Lattice dynamics and debye temperature of AlCu,AlSi and AlGe alloy systems

The lattice dynamics and specific heat at constant volume for AlCu alloy system is studied using our previous treatment based on the microscopic electronic theory. Considering the volume and electron density effect on the dynamical matrix of the pure constituent, we obtain the band and local mode frequencies at the temperature-dependent specific heat in the Al_1−x Cu_x solid solution. Then, using the data about the mean elastic wave and the specific heat extrapolated to the absolute zero temperature, the Debye temperature is presented for the Al_1−xCu_x, Al_1−xSi_x and Al_1−xGe_x alloy systems. The Debye temperature decreases as a function of the Cu atomic fraction x for Al_1−xCu_x alloy, and remarkably for Al_1−xSi_x and Al_1−xGe_x solid solutions.     

Direct Detection of Al–O–Al Structure in Aluminosilicate Specimens: A Use of Homo-Nuclear DQMAS NMR

A general strategy of Al–O–Al structure in various aluminosilicate was evaluated by combining triple-quantum magic angle spinning (3QMAS) and double-quantum homo-nuclear correlation under magic angle spinning (DQMAS) solid-state nuclear magnetic resonance (NMR) measurements with the aid of high magnetic field NMR (800 MHz for ¹H Larmor frequency). The results show that in many cases the direct detection of Al–O–Al sites in aluminosilicate crystals and glasses is possible; hence the extent of aluminum avoidance can be directly elucidated. Specifically, experimental evidence of Al–O–Al linkages in several aluminosilicate materials with Si/Al >1 was straightforwardly confirmed; and the existence of Al–O–Al is considered to have little correlation with the Si/Al ratio, but it may be strongly related to the cation and local structural arrangement. In addition, the presence of tri-clusters of (Si, Al)O₄-tetrahedra in aluminosilicate framework was proposed, which was thought to act as nuclei for formation and incorporation of cations to achieve charge neutrality.     

Determination of Al Composition in Strained AlGaN Layers

AlxGa1-xN/GaN heterostructures are grown on c-sapphire with the Al composition x from 0.2 to 0.4 and thicknesses from 20nm to 30nm. The lattice parameters a and c are determined from 2θ/ω scan. The AIGaN layers are found to be under tensile strain by using x-ray diffraction. Vegard＇s law induces a large deviation in Al composition determination by only considering the linear relationship between one lattice parameter （α or c） and Al composition. The accurate determination of Al composition is only possible with consideration of both the lattice parameters α and c, by assuming the tetragonal distortion in the AlGaN layer. Additionally, the results obtained from x-ray diffraction are verified by Rutherford backscattering.     

A computational study of the electron detachment energies of Al2As2 − and Al3As3 −

Ab initio and density functional theory calculations are reported for the low-lying electronic states of Al₂As₂ ^?, Al₂As₂, Al₃As₃ ^?, and Al₃As₃. The ²B_2g ground electronic state of Al₂As₂ ^? has a rhombic structure with the Al atoms occupying the shorter diagonal. In contrast, the As atoms occupy the shorter diagonal of the ground state rhombic structure of Al₂As₂. Electron detachment energies computed for Al₂As₂ ^? are presented and discussed. The adiabatic electron affinity of Al₂As₂ ^? is calculated to be 2.1 eV at the CCSD(T) level, using B3LYP and MP2 optimized geometries. The ground states of both Al₃As₃ ^? (²A₁′) and Al₃As₃ (¹A₁′) have planar hexagonal D_3h geometry. Electron detachment energies computed for the anion are reported. At the CCSD(T)//B3LYP level, the electron affinity of Al₃As₃ is calculated to be 2.47 eV.     

Compositional dependence of the deformation behaviour of ultrahigh-purity Ti–Al alloys

The present study is concerned with the effect of the O and Al concentrations on the deformation behaviour of ultrahigh-purity (UHP) Ti–(48,?50,?52)?at.%?Al alloys using UHP Ti with 30?wt?ppm?O. It has been shown that yield strength increases with increasing O content. Stoichiometric Ti–50?at.%?Al alloys had the lowest yield strength and the highest ductility when the O content was sufficiently low. It is suggested that the deformation mechanism of UHP binary Ti–Al is strongly related to the Al concentration. The deformation substructure of UHP Ti–48?at.%?Al is shown to be dominated by ordinary dislocation as well as deformation twinning and a small portion of superdislocations. The deformation substructure of UHP Ti–50?at.%?Al alloy was similar to that of Ti–48?at.%?Al, but deformation twinning was not observed. Most of dislocation structures of UHP Ti–52?at.%?Al alloy consisted of faulted dipoles. The major deformation mode of UHP Ti–48?at.%?Al and UHP Ti–50?at.%?Al alloys was ordinary dislocation in deformation orientation, which takes advantage of ordinary dislocation slip. However, the major deformation mode in this orientation for UHP Ti–52?at.%?Al alloys was superdislocation slip.     

The formation of V–Al–N thin films by reactive ion beam mixing of V/Al interfaces

The reactive ion beam mixing (IBM) of V/Al interfaces by low-energy N₂⁺ ions at room temperature leads to the formation of V–Al–N ternary nitride thin films. The kinetics, growth mechanisms, composition and electronic structure of those films have been studied using X-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy, Factor Analysis and Monte Carlo TRIDYN simulations. The comparison of experimental results with those obtained from TRIDYN simulations suggests that the chemical reaction with the nitrogen partial pressure and processes driven by residual defects are the rate-controlling mechanisms during the reactive IBM of V/Al interfaces. The kinetics of mixing is characterized by two stages. During the first stage (≤4×10¹⁶ ions/cm²), the formation of vanadium nitride is observed. In the second stage, vanadium nitride is transformed into a V–Al–N ternary nitride due to Al incorporation in the near surface region. Moreover, the V/Al ratio can be varied in a broad range, whereas the nitrogen concentration slightly decreases with increasing the aluminium content of the film.     

Thermodynamics and surface properties of liquid Al–Ga and Al–Ge alloys

The surface properties of Al–Ga and Al–Ge liquid alloys have been theoretically investigated at a temperature of 1100 K and 1220 K respectively. For the Al–Ga system, the quasi chemical model for regular alloy and a model for phase segregating alloy systems were applied, while for the Al–Ge system the quasi chemical model for regular and compound forming binary alloys were applied. In the case of Al–Ga, the models for the regular alloys and that for the phase segregating alloys produced the same value of order energy and same values of thermodynamic and surface properties, while for the Al–Ge system, the model for the regular alloy reproduced better the thermodynamic properties of the alloy. The model for the compound forming systems showed a qualitative trend with the measured values of the thermodynamic properties of the Al–Ge alloy and suggests the presence of a weak complex of the form Al₂Ge₃. The surface concentrations for the alloys show that Ga manifests some level of surface segregation in Al–Ga liquid alloy while the surface concentration of Ge in Al–Ge liquid alloy showed a near Roultian behavior below 0.8 atomic fraction of Ge.     

Superconducting amorphous Al−Cu films of high stability

By vapour quenching it is possible to produce amorphous metal films in the Al–Cu system which are superconducting between 1.2 and 2.6 K. These films show a negative temperature coefficient of resistivity and are stable up to 380 K. The analysis of electron diffraction patterns shows that Al_100–xCu_x is characterized by a dense packed atomic distribution with increasing order from 29~x~49. Al₅₁Cu₄₉ exhibits all typical features known from metglasses which are to a first approximation well understood by the Bernal model. From our results over the composition range 29<~x<~72 we conclude that the short range orders of our amorphous films are similar to those of the complex compounds existing in the phase diagram.Dedicated to Prof. Dr. W. Buckel on the occasion of his 60th birthday.     

Spontaneous magnetostriction of Y2Fe16Al compound

The structure and magnetic properties of Y₂Fe₁₆Al compound have been investigated by means of x-ray diffraction and magnetization measurements. The Y₂Fe Fe₁₆Al compound has a hexagonal Th$_{2}$Ni$_{17}$-type structure. Negative thermal expansion was found in Y₂Fe₁₆Al compound in the temperature range from 332 to 438K by x-ray dilatometry. The coefficient of the average thermal expansion is \alpha =-3.4\times 10^-5K^-1. The spontaneous magnetostrictive deformations from 293 to 427K have been calculated based on the differences between the experimental values of the lattice parameters and the corresponding values extrapolated from the paramagnetic range. The result shows that the spontaneous volume magnetostrictive deformation \textit{$\omega $}$_{\rm S}$ decreases from 5.4$\times $10^-3to near zero with temperature increasing from 293 to 427K, the spontaneous linear magnetostrictive deformation \textit{$\lambda $}$_{\rm c}$ along the $c$ axis is much larger than the spontaneous linear magnetostrictive deformation \textit{$\lambda $}$_{\rm a}$ in basal-plane in the same temperature range except near 427K.     

Microdeformation behaviour of Al–SiC metal matrix composites

The satisfactory performance of metal matrix composites depends critically on their integrity, the heart of which is the quality of the matrix-reinforcement interface. The nature of the interface depends in turn on the processing of the MMC component. At the micro-level, the development of local concentration gradients around the reinforcement can be very different according to the nominal conditions. These concentration gradients are due to the metal matrix attempting to deform during processing. This plays a crucial role in the micro-structural events of segregation and precipitation at the matrix-reinforcement interface. Equilibrium segregation occurs as a result of impurity atoms relaxing in disordered sites found at interfaces, such as grain boundaries, whereas non-equilibrium segregation arises because of imbalances in point defect concentrations set up around interfaces during non-equilibrium heat treatment processing. The amount and width of segregation depend very much on (a) the heat treatment temperature and the cooling rate, (b) the concentration of solute atoms and (c) the binding energy between solute atoms and vacancies. An aluminium–silicon–magnesium alloy matrix reinforced with varying amounts of silicon carbide particles was used in this study. A method of calculation has been applied to predict the interfacial fracture strength of aluminium, in the presence of magnesium segregation at metal matrix interface. Preliminary results show that the model succeeds in predicting the trends in relation to segregation and intergranular fracture strength behaviour in these materials. Microhardness profiles of reinforced and un-reinforced aluminium alloys are reported. The presence of precipitates at alloy-reinforcement interface identified by Nano-SEM.     

Directional solidification of Al–Cu–Ag alloy

Al–Cu–Ag alloy was prepared in a graphite crucible under a vacuum atmosphere. The samples were directionally solidified upwards under an argon atmosphere with different temperature gradients (G=3.99–8.79 K/mm), at a constant growth rate (V=8.30 μm/s), and with different growth rates (V=1.83–498.25 μm/s), at a constant gradient (G=8.79 K/mm) by using the Bridgman type directional solidification apparatus. The microstructure of Al-12.80-at.%–Cu-18.10-at.%–Ag alloy seems to be two fibrous and one lamellar structure. The interlamellar spacings (λ) were measured from transverse sections of the samples. The dependence of interlamellar spacings (λ) on the temperature gradient (G) and the growth rate (V) were determined by using linear regression analysis. According to these results it has been found that the value of λ decreases with the increase of values of G and V. The values of λ ² V were also determined by using the measured values of λ and V. The experimental results were compared with two-phase growth from binary and ternary eutectic liquid.     

Microstructure of supersaturated fcc Al–Fe alloys: A comparison of rapidly quenched and mechanically alloyed Al98Fe2

Alloys of the composition Al₉₈Fe₂ have been prepared by rapid quenching from the melt and mechanical alloying methods and have been studied by Xray diffraction techniques and room temperature ⁵⁷Fe Mössbauer effect methods. Results may be summarized as follows: The rapidly quenched sample is a single phase supersaturated fcc Al–Fe alloy. Mössbauer effect spectra indicate the presence of a substantially greater degree of Fe clustering than is expected for a random distribution of atoms on the lattice sites. Mechanically alloyed samples have been studied as a function of milling time and show the initial formation of a supersaturated fcc phase with microstructural properties which are quite similar to those of the rapidly quenched sample. Further milling results in the reduction of the average grain size and the formation of an amorphous phase. Mössbauer studies and previously reported phase diagrams suggest that a substantial fraction of the Fe resides in this phase.     

Characterization of quenched-in vacancies in Fe–Al alloys

Physical and mechanical properties of Fe–Al alloys are strongly influenced by atomic ordering and point defects. In the present work positron lifetime (LT) measurements combined with slow positron implantation spectroscopy (SPIS) were employed for an investigation of quenched-in vacancies in Fe–Al alloys with the Al content ranging from 18 to 49 at.%. The interpretation of positron annihilation data was performed using ab-initio   theoretical calculations of positron parameters. Quenched-in defects were identified as Fe-vacancies. It was found that the lifetime of positrons trapped at quenched-in defects increases with increasing Al content due to an increasing number of Al atoms surrounding the Fe vacancies. The concentration of quenched-in vacancies strongly increases with increasing Al content from ≈10⁻⁵$\approx {10}^{-5}$ in Fe₈₂Al₁₈${\mathrm{Fe}}_{82}{\mathrm{Al}}_{18}$ (i.e. the alloy with the lowest Al content studied) up to ≈10⁻¹$\approx {10}^{-1}$ in Fe₅₁Al₄₉${\mathrm{Fe}}_{51}{\mathrm{Al}}_{49}$ (i.e. the alloy with the highest Al content studied in this work).     

Influence of Al doping on electrical properties of Ni–Cd nano ferrites

We have reported the structural and electrical properties of nano particles of Al doped Ni_0.2Cd_0.3Fe_2.5O₄ ferrite using X-ray diffraction, dielectric spectroscopy and impedance spectroscopy at room temperature. XRD analysis confirms that the system exhibits polycrystalline single phase cubic spinel structure. The average particle size estimated using Scherrer formula for Lorentzian peak (3 1 1), has been found 5(±) nm. The results obtained show that real (ε′), imaginary (ε″) part of the dielectric constant, loss tangent (tan δ), and ac conductivity (σ_ac) shows normal behaviour with frequency. The dielectric properties and ac conductivity in the samples have been explained on the basis of space charge polarization according to Maxwell–Wagner two-layer model and the Koop’s phenomenological theory. The impedance analysis shows that the value of grain boundary impedance increases with Al doping. The complex impedance spectra of nano particles of Al doped Ni–Cd ferrite have been analyzed and explained using the Cole–Cole expression.