Synthesis,characterization, and KOH activation of nanoporous carbon for increasing CO2 adsorption capacity

Ordered nanoporous carbons (ONCs) were prepared using a soft-templating method. To improve the CO₂ adsorption efficiency, ONCs were chemically activated to obtain high specific surface area and micro-/mesopore volume with different KOH amounts (i.e., 0, 1, 2, 3, and 4) as an activating agent. The prepared nanoporous carbons (NCs) materials were analyzed by low-angle X-ray diffraction for confirmation of synthesized ONCs structures. The structural properties of the NCs materials were analyzed by high-angle X-ray diffraction. The textural properties of the NCs materials were examined using the N₂/77 K adsorption isotherms according to the Brunauer–Emmett–Teller equation. The CO₂ adsorption capacity was measured by CO₂ isothermal adsorption at 298 K/1 bar. From the results, the NCs activated with KOH showed that the increasing specific surface areas and total pore volumes resulted in the enhancement of CO₂ adsorption capacity.     

Adsorption of SO2 by typical carbonaceous material: a comparative study of carbon nanotubes and activated carbons

Applying activated carbons for SO₂ adsorption and conversion to H₂SO₄, as a dry process, has been considered the development direction of desulfurization technology. Coal-based activated carbon, coconut shell activated carbon, single wall carbon nanotube and multi-wall carbon nanotubes were used as typical carbonaceous materials to study the SO₂ adsorption mechanism. SEM, N₂ adsorption, XPS and fixed-bed reaction system were employed to study the morphology, pore structure, surface functional groups and SO₂ adsorption behaviors of the four adsorbents. The fixed-bed experiment was carried out at normal pressure and SO₂ concentration was set 1,000 ppm. According to SEM and N₂ adsorption results, hierarchical pore structure was an important characteristic of activated carbon. Aggregation was an important characteristic of CNTs. Mesopores and macropores took the dominance of pore structure in CNTs. According the SO₂ adsorption data and correlation analysis, it can be concluded that the dominant adsorption type on activated carbons does not alter with adsorption temperature changing. However, the adsorption type of SO₂ adsorption on CNTs changes with adsorption temperature varying. With adsorption temperature increasing, the dominant adsorption type transforms to chemisorption by physisorption. Higher-density π–π* in carbon nanotubes may be the active sites for the SO₂ chemical adsorption. Micropores with the diameter smaller than 0.7 nm were the best SO₂ adsorption place for both activated carbons and carbon nanotubes. The results provided a profound insight into the microstructure and SO₂ adsorption mechanism of the two kinds of carbonaceous materials.     

Nanoporous Carbon Tubes from Fullerene Crystals as the π‐Electron Carbon Source

Here we report the thermal conversion of one‐dimensional (1D) fullerene (C₆₀) single‐crystal nanorods and nanotubes to nanoporous carbon materials with retention of the initial 1D morphology. The 1D C₆₀ crystals are heated directly at very high temperature (up to 2000 °C) in vacuum, yielding a new family of nanoporous carbons having π‐electron conjugation within the sp²‐carbon robust frameworks. These new nanoporous carbon materials show excellent electrochemical capacitance and superior sensing properties for aromatic compounds compared to commercial activated carbons.     

Reversible Pore Size Control of Elastic Microporous Material by Mechanical Force

Nanoporous materials, such as zeolites, activated carbons, and metal–organic frameworks (MOFs), are peculiar platforms in which a variety of guest molecules are stored, reacted, and/or separated. The size of the nanopores is essential to realize advanced functions. In this work, we demonstrate a very simple but innovative method for the control of nanopore size, that is, reversible and continuous control by mechanical force loaded to soft nanoporous materials. The elastic properties of several microporous materials, including zeolites, zeolite‐templated carbon (ZTC), activated carbon, and MOFs (e.g., ZIF‐8), are examined and it is found that ZTC is a material that is suitable for the aforementioned idea thanks to its extraordinary soft properties compared to the others. The original pore size of ZTC (1.2 nm) can be contracted to 0.85 nm by using a relatively weak loading force of 135 MPa, whereas the other microporous materials barely contracted. To demonstrate the change in the physical properties induced by such artificial deformation, in situ gas adsorption measurements were performed on ZTC with and without loading mechanical force, by using CO₂, CH₄, and H₂, as adsorbates. Upon the contraction by loading 69 or 135 MPa, CO₂ adsorption amount is increased, due to the deepening of the physisorption potential well inside the micropores, as proved by the increase of the heat of adsorption. Moreover, the adsorption amount is completely restored to the original one after releasing the mechanical force, indicating the fully reversible contraction/recovery of the ZTC framework against mechanical force. The experimental results are theoretically supported by a simulation using Grand Canonical Monte Carlo method. The similar adsorption enhancement is observed also on CH₄, whereas H₂ is found as an exception due to the weak interaction potential.     

树脂基球状活性炭的制备及对二氧化碳吸附性能的研究

以四种离子交换树脂（两种强碱性树脂D201和D280、两种弱碱性树脂D301G和D301R）为原料,经过磺化、炭化、活化处理制备了树脂基球状活性炭。采用TG、SEM、N₂吸附等对球状活性炭的收率、表面形貌、比表面积进行了表征,研究了所制球状活性炭对CO₂的吸附性能。结果表明,磺化处理有助提高树脂球的炭化收率;得到的四种球状活性炭对CO₂吸附性能良好,强碱性树脂球原料比弱碱性树脂球更具有优势,其中,由强碱性树脂球D201制得的树脂球状活性炭在30 ℃下对CO₂的吸附量可达2.57 mmol/g;十次循环吸附之后,树脂球仍能保持很好的CO₂吸附性能。     

活性炭孔隙结构对催化氧化脱除单质汞的影响

研究活性炭在硫化氢存在条件下催化氧化脱除煤气中单质汞的吸附机理和探讨提高其吸附能力的方法,在模拟煤气气氛下对3种活性炭和一种活性焦进行汞的吸附性能实验,并进一步分析活性炭(焦)的孔隙结构。用BET方程处理N₂等温吸附数据,计算比表面积;用HK法进行微孔分析;用BJH法计算中孔孔径分布。结果表明,硫化氢被催化氧化后,生成吸附在活性炭孔壁上的活性硫促进了对汞的吸附;随着活性炭微孔和中孔体积的增大,活性炭对汞的吸附能力得到提高。     

Preparation of activated carbons and their adsorption properties for greenhouse gases: CH4 and CO2

Three kinds of activated carbons were prepared using coconut-shells as carbon precursors and characterized by XRD, FT-IR and texture property test. The results indicate that the prepared activated carbons were mainly amorphous and only a few impurity groups were adsorbed on their surfaces. The texture property test reveals that the activated carbons displayed different texture properties, especially the micropore size distribution. The adsorption capacities of the activated carbons were investigated by adsorbing CH4, CO2, N2 and O2 at 25 ?C in the pressure range of 0-200 kPa. The results reveal that all the activated carbons had high CO2 adsorption capacity, one of which had the highest CO2 adsorption value of 2.55 mmol/g at 200 kPa. And the highest adsorption capacity for CH4 of the activated carbons can reach 1.93 mmol/g at 200 kPa. In the pressure range of 0-200 kPa, the adsorption capacities for N2 and O2 were increased linearly with the change of pressure and K-AC is an excellent adsorbent towards the adsorption separation of greenhouse gases.     

Preparation and characterization of waste ion-exchange resin-based activated carbon for CO<Subscript>2</Subscript> capture

Waste ion-exchange resin was utilized as precursor to produce activated carbon by KOH chemical activation, on which the effects of different activation temperatures, activation times and impregnation ratios were studied in this paper. The CO₂ adsorption of the produced activated carbon was tested by TGA at 30 °C and environment pressure. Furthermore, the effects of preparation parameters on CO₂ adsorption were investigated. Experimental results show that the produced activated carbons are microporous carbons, which are suitable for CO₂ adsorption. The CO₂ adsorption capacity increases firstly and then decreases with the increase of activation temperature, activation time and impregnation rate. The maximum adsorption capacity is 81.24 mg/g under the condition of 30 °C and pure CO₂. The results also suggest that waste ion-exchange resin-based activated carbons possess great potential as adsorbents for post-combustion CO₂ capture.     

Mesopore-dominant porous carbon derived from bio-tars as an electrode material for high-performance supercapacitors

For the first time, toxic bio-tars collected from the gasification of pine sawdust are used as the precursor for activated carbons. Various types of activation agents including KOH, K₂CO₃, H₃PO₄ and ZnCl₂ were screened for obtaining superior activated carbons. When KOH was used as an activation agent, the obtained activated carbons exhibited high specific surface area and large mesopore volume. The activated carbons were further employed to be the electrode material of supercapacitors, and its specific capacitance reached up to 260 F g^?1 at 0.25 A g^?1 current density. Also, it showed an excellent rate performance from preserving a relatively high specific capacitance of 151 F g^?1 at 50 A g^?1. The assembled device also exhibited the good electrochemical stability with the capacity retention of 90% after 5000 cycles. Furthermore, the maximum energy density of the activated carbons in organic electrolyte reached 17.8 Wh kg^?1.     

The removal of H2S derived from livestock farm on activated carbon modified by combinatory method of high-pressure hydrothermal method and impregnation method

H₂S is considered as the main gas pollutant from livestock farm and activated carbon (AC) is widely used as adsorbent for H₂S. This paper focuses on the influence of modification conditions and operation conditions on the H₂S adsorption performance on AC samples. The H₂S adsorption performance on modified AC (MAC) samples by single and combinatory method has been investigated. It is concluded that the MAC by combinatory method of high-pressure hydrothermal method followed by alkaline solution impregnation method could promote the H₂S adsorption performance remarkably. The H₂S adsorption performance differs with different operation conditions. Meanwhile the samples of fresh AC and exhausted AC have been characterized using BET, FTIR, TPD and Boehm titration method. The experimental results are confirmed that the characteristics of AC have significant influence on the adsorption ability for H₂S.     

Assessing surface chemistry and pore structure of active carbons by a combination of physisorption (H2O, Ar, N2, CO2), XPS and TPD-MS

In order to address open questions concerning the surface chemistry and pore structure characterization of nanoporous carbons, we performed extensive experiments by combining various experimental techniques on a series of commercially available activated carbons which exhibit diverse surface chemistry characteristics. Pore size analysis was performed on Ar (87 K), N₂ (77 K) and CO₂ (273 K) adsorption isotherms using state-of-the art methods based on density functional theory, including the recently developed quenched solid density functional theory (QSDFT). A detailed study of the surface chemistry was obtained by applying temperature programmed desorption coupled with mass spectrometry (TPD-MS) as well as XPS (X-Ray-Photoelectron Scattering). This information together with the pore structure information leads to a reliable interpretation of systematic water adsorption measurements obtained on these materials. Our results clearly suggest that water adsorption is indeed a sensitive tool for detecting differences in surface chemistry between chemically and physically activated active carbon materials with comparable ultramicropore structure. The occurrence of sorption hysteresis associated with the filling of micro- and narrow mesopores (in a range where nitrogen and argon isotherms are reversible) provides additional structural information, complementary to the insights from argon/nitrogen/carbon dioxide adsorption.     

Pilot production of activated carbon from cotton stalks using H3PO4

Cotton stalks, an agricultural waste, were chemically activated in a batch process using H₃PO₄ in a locally designed carbonizer at 420 °C in the absence of any purging gases. Mechanically cut short sticks were soaked in diluted H₃PO₄ for a short duration (Batch 1) and an extended period (Batch 2) prior to thermal treatment. The derived carbons contained both coarse and fine grains with acidic effect. Porosity was characterized by N₂ adsorption at −196 °C and the isotherms analyzed by the α-method to estimate total and microporous surface areas in addition to total and microporous volumes. The produced carbons exhibited well-developed porosity that was essentially microporous in composition. Several key performance parameters were altered considerably as a result of impregnation with H₃PO₄ and the extended chemical activation period (Batch 2). Most of the internal porosity of both carbons was accessible to adsorption of iodine, whereas the uptake of methylene blue dye was proportional to the average size of micropores which were larger for the batch with a longer acid soaking time. SEM and FTIR investigations revealed the presence of a developed honeycomb structure and different oxygen functionalities on surfaces of the activated products which are advantageous in liquid-phase applications. Preliminary laboratory-scale experiments with Pb(II) indicate that adsorption capacity of target heavy metals compares favorably with commercially available activated carbons. The raw material, pre-processing, and activation process prove feasible for the production of activated carbon on a large scale, thereby providing a sustainable strategy for treatment of toxic waste streams.     

Identifying Optimal Zeolitic Sorbents for Sweetening of Highly Sour Natural Gas

Raw natural gas is a complex mixture comprising methane, ethane, other hydrocarbons, hydrogen sulfide, carbon dioxide, nitrogen, and water. For sour gas fields, selective and energy‐efficient removal of H₂S is one of the crucial challenges facing the natural‐gas industry. Separation using nanoporous materials, such as zeolites, can be an alternative to energy‐intensive amine‐based absorption processes. Herein, the adsorption of binary H₂S/CH₄ and H₂S/C₂H₆ mixtures in the all‐silica forms of 386 zeolitic frameworks is investigated using Monte Carlo simulations. Adsorption of a five‐component mixture is utilized to evaluate the performance of the 16 most promising materials under close‐to‐real conditions. It is found that depending on the fractions of CH₄, C₂H₆, and CO₂, different sorbents allow for optimal H₂S removal and hydrocarbon recovery.     

Adsorption of p-Nitrophenol in Untreated and Treated Activated Carbon

The adsorption of p-nitrophenol in one untreated activated carbon (F100) and three treated activated carbons (H₂, H₂SO₄ and Urea treated F100) was carried out at undissociated and dissociated conditions.To characterize the carbon, N₂ and CO₂ adsorption were used. X-ray Photoelectron Spectroscopy (XPS) was used to analyze the surface of the activated carbon.The experimental isotherms are fitted via the Langmuir homogenous model and Langmuir binary model. Variation of the model parameters with the solution pH is studied. Both Q _max and the adsorption affinity coefficient (K ₁) were dependent on the PZC of the carbons and solution pH. The Effect of pH must be considered due to its combined effects on the carbon surface and on the solute molecules. Adsorption of p-nitrophenol at higher pH was found to be dependent on the concentration of the anionic form of the solute.     

Influence of surface heterogeneity on hydrogen adsorption on activated carbons

This study presents an experimental and theoretical analysis of the effect of surface heterogeneity on the capacity of 20 commercial activated carbons to adsorb hydrogen at 77 and 258 K and for maximum pressures of 20 bar. Some of the samples have been subjected to surface modification by impregnation or by surface oxidation prior to the hydrogen adsorption measurements. All the activated carbons have been analyzed by N₂ adsorption at 77 K using the thermodynamic isotherm presented in a previous study. The hydrogen adsorption capacity of the activated carbons has been well correlated to the micropore volume and the characteristic m₂ parameter of the thermodynamic isotherm accounting for the energy heterogeneity of the material. On the basis of the model presented here, we discuss how surface heterogeneity, in addition to the adsorption strength, might affect the ability of activated carbons and related materials to adsorb hydrogen.     

Effects of micropore size and chemical nature of the surface of carbon adsorbents on the adsorption isotherms of water vapor

Adsorption of benzene and water vapors on activated carbons of various microporous structure was studied. The values of the characteristic energy of adsorption of benzene and water vapors were compared and the affinity coefficients β_H2O for carbons with various degrees of activation were calculated. The values of the β_H2O coefficient for carbons with the same degrees of oxidation remain constant. This makes it possible to use the experimental data on benzene adsorption for prediction of the behavior of microporous activated carbons towards adsorption of water vapor. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2636–2639, December, 2005.     

A DFT study on the structural and electronic properties of small toxic gases on B- and Al- doped C<Subscript>20</Subscript> fullerene

The structural and electronic properties of semiconducting BC₁₉ and AlC₁₉ heterofullerenes as adsorbents for toxic small gas molecules (H₂S and SO₂) are determined by DFT. Structural parameters, energy gaps, natural population analysis, partial density of state, dipole moments, and vibrational frequencies were extracted. The adsorption process and sensitivity to the gases are increased by doping with B or Al. The results show that AlC₁₉ is the most sensitive structure. The good sensing of AlC₁₉ is related to high charge transfer upon gas adsorption. Adsorption of the H₂S on the BC₁₉ has negligible effects on the electronic properties, to be categorized as “harmless adsorption”. H₂S is weakly adsorbed on BC₁₉ and AlC₁₉. The H₂S and SO₂ molecules act as electron donating and electron withdrawing molecules, respectively. Notably, the adsorption processes are highly exothermic. In general, BC₁₉ is more reactive than C20 and AlC₁₉ is the most reactive cage. This provides a theoretical basis to fabricate B- and Al-doped C20-based gas sensors.     

Calorimetric evaluation of activated carbons modified for phenol and 2,4-dinitrophenol adsorption

Two commercial activated carbons with differences in their superficial chemistry, one granular and the other pelletised, were modified for use in phenol and 2,4-dinitrophenol adsorption. In this paper, changes to the activated carbon surface will be evaluated from their immersion calorimetry in water and benzene, and they will then be compared with Area BET, chemical parameters, micropore size distributions and hydrophobicity factors of the modified activated carbons. The activated carbons were modified using 60 % solutions of phosphoric acid (H₃PO₄), nitric acid (HNO₃), zinc chloride (ZnCl₂) and potassium hydroxide (KOH); the activated carbon/solution ratio was 1:3 and impregnation was conducted 291 K for a period of 72 h before samples were washed until a constant pH was obtained. Water immersion calorimetry showed that the best results were obtained from activated carbons modified with nitric acid, which increased from ?10.6 to ?29.8 J g^?1 for modified granular activated carbon, and ?30.9 to ?129.3 J g^?1 for pelletised activated carbon. Additionally, they showed the best results in phenol and 2.4-dititrophenol adsorption. Those results indicate that impregnation with nitric acid under the employed conditions could generate a greater presence of oxygenated groups on their surface, which favours hydrogen bond formation and the increased adsorption of polar compounds. It should also be noted that immersion enthalpy in benzene for modified activated carbon with nitric acid is the method with the lowest value, which is consistent with the increased presence of polar groups on its surface. Regarding hydrophobicity factors, it was observed that granular carbons modified with nitric acid and potassium hydroxide have the lowest ratios, indicating greater interaction with water.