Evaluation of endothelial cell adhesion onto different protein/gold electrodes by EIS

To study cell attachment to biomaterials, several proteins such as fibronectin, collagen IV, heparin, immunoglobulin G, and albumin have been deposited onto polystyrene adsorbed on a self-assembled monolayer (silane or thiol) on glass or gold, respectively. The different steps of this multilayer assembly have been characterized by electrochemical impedance spectroscopy (EIS). These data are compared to those of adhesion rate, viability percentage, and cytoskeleton labeling for a better understanding of the cell adhesion process to each protein. All the proteins are endothelial cell adhering biomolecules but not with the same features. A linear relationship has been established between adhesion rate and resistance of the endothelial cell/protein interface for all negatively charged proteins.     

Endothelial cell adhesion on polyelectrolyte multilayer films functionalised with fibronectin and collagen

The seeding of endothelial cells on biomaterial surfaces has become a major challenge to achieve better haemocompatibility of these surfaces. Multilayers of polyelectrolytes formed by the layerby-layer method are promising in this respect. In this study, the interactions of endothelial cells with multilayered polyelectrolytes films were investigated. The build-ups were prepared by selfassembled alternatively adsorbed polyanions and polycations functionalised with fibronectin and collagen. Anionic poly(sodium 4-styrenesulfonate) and cationic poly(allylamine hydrochloride) polyelectrolytes were chosen as a model system. Elaborated surfaces were characterised by electrochemical impedance spectroscopy and cyclic voltammetry. The modified electrode showed good reversible electrochemical properties and high stability in an electrolyte solution. The film ohmic resistance was highest when the film was coated with fibronectin; the parameters so determined were correlated with atomic force microscopy images. Cell colorimetric assay (WST-1) and immunofluorescence were used to quantify the cell viability and evaluate the adhesion properties. When cultured on a surface where proteins were deposited, cells adhered and proliferated better with fibronectin than with collagen. In addition, a high surface free energy was favourable to adhesion and proliferation (48.8 mJ m⁻² for fibronectin and 39.7 mJ m⁻² for collagen, respectively). Endothelial cells seeded on functionalised-polyelectrolyte multilayer films showed a good morphology and adhesion necessary for the development of a new endothelium.     

Layer-by-Layer Self-Assembled Multilayer Films Composed of Graphene/Polyaniline Bilayers: High-Energy Electrode Materials for Supercapacitors

Multilayer assemblies of uniform ultrathin film electrodes with good electrical conductivity and very large surface areas were prepared for use as electrochemical capacitors. A layer-by-layer self-assembly approach was employed in an effort to improve the processability of highly conducting polyaniline (PANi) and chemically modified graphene. The electrochemical properties of the multilayer film (MF-) electrodes, including the sheet resistance, volumetric capacitance, and charge/discharge ratio, were determined by the morphological modification and the method used to reduce the graphene oxide (GO) to reduced graphene oxide (RGO) in the multilayer films. The PANi and GO concentrations could be modulated to control the morphology of the GO monolayer film in the multilayer assemblies. Optical ellipsometry was used to determine the thickness of the GO film in a single layer (1.32 nm), which agreed well with the literature value (～1.3 nm). Hydroiodic acid (HI), hydrazine, or pyrolysis were tested for the reduction of GO to RGO. HI was found to be the most efficient technique for reducing the GO to RGO in the multilayer assemblies while minimizing damage to the virgin state of the acid-doped PANi. Ultimately, the MF-electrode, which could be optimized by fine-tuning the nanostructure and selecting a suitable reduction method, exhibited an excellent volumetric capacitance, good cycling stability, and a rapid charge/discharge rate, which are required for supercapacitors. A MF-electrode composed of 15 PANi/RGO bilayers yielded a volumetric capacitance of 584 F/cm(3) at a current density of 3.0 A/cm(3). Although this value decreased exponentially as the current density increased, approaching a value of 170 F/cm(3) at 100 A/cm(3), this volumetric capacitance is one of the best yet reported for the other carbon-based materials. The intriguing features of the MF-electrodes composed of PANi/RGO multilayer films offer a new microdimensional design for high energy storage devices for use in small portable electronic devices.     

电化学交流阻抗技术表征自组装多层膜

采用电化交流阻抗技术对一种新型电极表面修饰的自组装多层膜进行表征,通过阻抗谱分析,得出电荷传递电阻和双电层电容与膜层数的关系,证明该多层膜随数增加具有均匀增长,结构致密等特性.     

CR传输线解析EIS表征杯芳烃离子选择电极

电化学阻抗谱(EIS)是表征电化学体系特征及其过程机理的重要技术,但解谱模型不一致限制了其应用.为此,采用CR传输线模型中的8CRR等效电路拟合文献报道的杯[4,8,12]芳烃离子选择电极与Na+、Ca2+及Fe3+作用的EIS;并根据电荷转移电阻、表面吸附、扩散阻力和空间电荷层电容等不同特征,揭示了作用机理的共性与差异.结果表明,所采用的方法可操作性强,结果客观,具有一定的理论和应用价值.     

Charge displacement by adhesion and spreading of a cell

The potentiostatic control of surface charge density and interfacial tension of an electrode immersed in an aqueous electrolyte solution offers a possibility for direct studies of non-specific interactions in cell adhesion. Unicellular marine alga, Dunaliella tertiolecta (Chlorophyceae) of micrometer size and flexible cell envelope was used as a model cell and 0.1 M NaCl as supporting electrolyte. The dropping mercury electrode acted as in situ adhesion sensor and the electrochemical technique of chronoamperometry allowed measurement of the spread cell-electrode interface area and the distance of the closest approach of a cell. The adhesion and spreading of a single cell at the mercury electrode causes a displacement of counter-ions from the electrical double layer over a broad range of the positive and negative surface charge densities (from +16.0 to -8.2 microC/cm2). The flow of compensating current reflects the dynamics of adhesive contact formation and subsequent spreading of a cell. The adhesion and spreading rates are enhanced by the hydrodynamic regime of electrode's growing fluid interface. The distance of the closest approach of an adherent cell is smaller or equal to the distance of the outer Helmholz plane within the electrical double layer, i.e. 0.3-0.5 nm. There is a clear evidence of cell rupture for the potentials of maximum attraction as the area of the contact interface exceeded up to 100 times the cross-section area of a free cell.     

Electrochemical characterization of polyelectrolyte/gold nanoparticle multilayers self-assembled on gold electrodes

Polyelectrolyte/gold nanoparticle multilayers composed of poly(l-lysine) (pLys) and mercaptosuccinic acid (MSA) stabilized gold nanoparticles (Au NPs) were built up using the electrostatic layer-by-layer self-assembly technique upon a gold electrode modified with a first layer of MSA. The assemblies were characterized using UV-vis absorption spectroscopy, cyclic and square-wave voltammetry, electrochemical impedance spectroscopy, and atomic force microscopy. Charge transport through the multilayer was studied experimentally as well as theoretically by using two different redox pairs [Fe(CN)(6)](3-/4-) and [Ru(NH(3))(6)](3+/2+). This paper reports a large sensitivity to the charge of the outermost layer for the permeability of these assemblies to the probe ions. With the former redox pair, dramatic changes in the impedance response were obtained for thin multilayers each time a new layer was deposited. In the latter case, the multilayer behaves as a conductor exhibiting a strikingly lower impedance response, the electric current being enhanced as more layers are added for Au NP terminated multilayers. These results are interpreted quite satisfactorily by means of a capillary membrane model that encompasses the wide variety of behaviors observed. It is concluded that nonlinear slow diffusion through defects (pinholes) in the multilayer is the governing mechanism for the [Fe(CN)(6)](3-/4-) species, whereas electron transfer through the Au NPs is the dominant mechanism in the case of the [Ru(NH(3))(6)](3+/2+) pair.     

Ultrasensitive bioelectronic devices based on conducting polymers for electrophysiology studies

Conducting polymer electrodes based on poly(3,4-ethylenedioxythiophene doped with poly(styrenesulfonate) (PEDOT:PSS) are evaluated as transducers to record extracellular signals in cell populations. The performance of the polymer electrode is compared with a gold electrode. A small-signal impedance analysis shows that in the presence of an electrolyte, the polymer electrode establishes for frequencies below 100 Hz a higher capacitive electrical double layer at the electrode/electrolyte interface. Furthermore, the polymer/electrolyte interfacial resistance is several orders of magnitude lower than the resistance of the gold/electrolyte interface. The polymer low interfacial resistance minimizes the intrinsic thermal noise and increases the system sensitivity. The ultra-sensitivity of the polymer-based transducer system was demonstrated by recording the electrical activity of cancer cells of the nervous system.     

氧化锰表面改性活性炭电极材料的电化学特性

用Mn(NO3)2溶液浸渍-高温热解法对普通活性炭进行表面改性处理以改善其电化学性能. 采用氮气吸附、SEM、XRD等方法研究改性活性炭的比表面积、孔结构、形貌和氧化锰的晶体结构; 用循环伏安、恒流充放电、交流阻抗等电化学方法研究了改性活性炭电极构成的电化学电容器的性能. 结果表明, Mn(NO3)2热解产生的多价态氧化锰有法拉第赝电容效应, 尤其是立方晶形结构的α-Mn2O3, 与活性炭的双电层电容构成了复合电容, 因而改性炭材料的比电容有明显的提高, 其质量比电容达到254 F·g-1, 比未改性炭的165 F·g-1提高了54%. 改性炭电极电化学电容器具有优异的充放电可逆性和稳定性, 而且等效串联电阻较小, 只有0.40 Ω; 经2000次循环的长期测试, 容量保持率几乎达到100%.     

Deviations of capacitive and inductive loops in the electrochemical impedance of a dissolving iron electrode.

The electrochemical impedance of an iron electrode often shows the capacitive and inductive loops on the complex plane. The capacitive loop originates from the time constant of the charge transfer resistance and the electric double layer capacitance. The inductive loop is explained by Faradaic processes involving the reaction intermediate. In some cases, these loops deviate from a true semicircle. In this paper, the origins and curve-fitting methods for the deviated loops of electrochemical impedance are discussed. The constant phase element (CPE) was used to present the deviation of the capacitive loop instead of electric double layer capacitance. The reaction rate constants, which are a function of the frequency, are proposed for the Faradaic impedance to present the deviated inductive loop.     

电解液离子与炭电极双电层电容的关系

以酚醛树脂基纳米孔玻态炭(NPGC)为电极, 通过微分电容伏安曲线的测试, 研究了水相体系电解液离子与多孔炭电极双电层电容的关系. 结果表明, 稀溶液中, 多孔炭电极的微分电容曲线在零电荷点(PZC)处呈现凹点, 电容降低, 双电层电容受扩散层的影响显著；若孔径小, 离子内扩散阻力大, 电容下降更为迅速, 扩散层对双电层电容的影响增大. 而增大炭材料的孔径或电解液浓度, 可明显减弱甚至消除扩散层对电容的影响. 炭电极的单位面积微分电容高, 仅表明孔表面利用率高, 如欲获得高的电容量, 还要有大的比表面积. 离子水化对炭电极的电容产生不利影响, 选用大离子和增大炭材料的孔径, 可有效降低离子水化对炭电极电容性能的影响.     

Investigation of Ig.G adsorption and the effect on electrochemical responses at titanium dioxide electrode

The adsorption of Immunoglobulin G on a titanium dioxide (TiO(2)) electrode surface was investigated using (125)I radiolabeling and electrochemical impedance spectroscopy (EIS). (125)I radiolabeling was used to determine the extent of protein adsorption, while EIS was used to ascertain the effect of the adsorbed protein layer on the electrode double layer capacitance and electron transfer between the TiO(2) electrode and the electrolyte. The adsorbed amounts of Ig.G agreed well with previous results and showed approximately monolayer coverage. The amount of adsorbed protein increased when a positive potential was applied to the electrode, while the application of a negative potential resulted in a decrease. Exposure to solutions of Ig.G resulted in a decrease of the double layer capacitance (C) and an increase in the charge-transfer resistance (R(2)) at the electrode solution interface. As more Ig.G adsorbed onto the electrode surface, the extent of C and R(2) variation increased. These capacitance and charge-transfer resistance variations were attributed to the formation of a proteinaceous layer on the electrode surface during exposure.     

掺钇纳米NiO的制备及其超大电容性能研究

应用化学共沉淀法制备掺Y的纳米N iO.XRD分析表明,Y的添加不改变N iO的晶体结构,但晶粒尺寸有所减小.利用恒流充放电、循环伏安和交流阻抗等测试方法对Y-N iO电极材料在5 mo.lL-1KOH溶液中作电化学性能测试.结果表明,化学掺杂提高了电极的比容量,当N iO与Y2O3的质量比为1∶0.1时,单电极放电比容量可达到363 F.g-1,比纯氧化镍电极提高了2.02倍.交流阻抗测试显示,Y掺杂降低了电解液在电极中的扩散阻力,提高了质子扩散能力,从而表现了更好的电容性能.     

PANI/MWCNT电极在硫酸锂溶液中电容性能

化学氧化法制备聚苯胺/多壁碳纳米管复合材料(PANI/MWCNT),扫描电镜(SEM)、XRD及IR表征样品结构及形貌,电化学方法测定复合电极循环伏安曲线、恒流充放电曲线及电极交流阻抗.结果表明,PANI/MWCNT电极在1mol/L的Li2SO4溶液中具有较好电容性能,在电流密度为5mA/cm2时,比电容为412F/g.PANI/MWCNT电极较PANI电极有更好的大电流放电能力,50mA/cm2下复合电极的比电容仍达318F/g,为5mA/cm2时该电极比电容的77.2%,而PANI电极的比电容仅为其5mA/cm2时的56.2%.交流阻抗证明碳纳米管降低复合电极的电阻,显著提高大电流放电能力.     

尖晶石锂锰氧化物电极首次脱锂过程的EIS研究

研究了尖晶石锂锰氧化物电极首次脱锂过程中的电化学阻抗特征. 通过选取适当的等效电路拟合实验所得的电化学阻抗谱数据, 获得了首次脱锂过程中固体电解质相界面膜(SEI膜)的电阻、电容以及电荷传递电阻、双电层电容等随电极极化电位的变化规律.     

超级电容器炭电极材料孔结构对其性能的影响

采用无瓶颈的系列酚醛树脂活性炭为电极材料，用氮吸附和恒流充、放电，以及交流阻抗法，研究孔径和孔表面积等孔结构对其性能的影响.结果表明，活性炭电极材料双电层电容与微孔(孔宽度< 2.0 nm)表面和外孔(孔宽度 >2.0 nm)表面都有关系，但主要取决于微孔表面双电层电容.微孔表面比电容为21.4 μF•cm－2，外孔表面比电容< 10 μF•cm－2.外孔表面比电容较低可能是由于空间电荷层的影响.微孔孔径较大的炭材料具有高比电容和良好的高倍率放电的特性.     

肝素钠掺杂球状聚吡咯的合成及其电化学电容

以生物制剂肝素钠为掺杂剂,由自组装方法合成出平均粒径为100 nm的球状聚吡咯(PPy),用作超级电容器电极材料.透射电镜(TEM)、循环伏安、恒流充放电和电化学交流阻抗测试表明,肝素钠掺杂聚吡咯呈现较好的形貌和电容性质,在电流密度3 mA/cm2下充放电,单电极比电容达到338 F/g.     

Influence of applied potential on the impedance of alkanethiol SAMs

Self-assembled monolayers are generally considered to behave as dielectric layers with a capacitance that is dependent on the monolayer thickness and the relative permittivity that is determined by the hydrocarbon tail. We show that the impedance response of alkanethiol-modified gold surfaces can be modeled as a parallel network consisting of the capacitance and resistance of the monolayer over a wide potential range. At potentials positive to -0.3 V (Ag/AgCl), the monolayer resistance is greater than 10(6) Omega cm2; however, at more negative potentials, the monolayer resistance decreases exponentially with potential with an inverse slope of about 250 mV. Over the same potential range, the monolayer capacitance is independent of potential. Although the same behavior is observed on ultrasmooth, template-stripped gold, the resistance at any potential is larger than for evaporated gold. The progressive increase in permeability of the monolayer is associated with an increase in electric field at potentials negative to the potential of zero charge.     

MWCNTs/metal (Ni, Co, Fe) oxide nanocomposite as potential material for supercapacitors application in acidic and neutral media

Supercapacitive properties of synthesised metal oxides nanoparticles (MO where M = Ni, Co, Fe) integrated with multi-wall carbon nanotubes (MWCNT) on basal plane pyrolytic graphite electrode (BPPGE) were investigated. Successful modification of the electrode with the MWCNT-MO nanocomposite was confirmed with spectroscopic and microscopic techniques. Supercapacitive properties of the modified electrodes in sulphuric acid (H₂SO₄) and sodium sulphate (Na₂SO₄) electrolytes were investigated using cyclic voltammetry, electrochemical impedance spectroscopy and galvanostatic constant current charge–discharge (CD) techniques. The specific capacitance values followed similar trend with that of the cyclic voltammetry and the electrochemical impedance experiments and are slightly lower than values obtained using the galvanostatic charge–discharge cycling. MWCNT-NiO-based electrode gave best specific capacitance of 433.8 mF?cm^?2 (ca 2,119 F?g^?1) in H₂SO₄. The electrode exhibited high electrochemical reproducibility with no significant changes over 1,000 cyclic voltammetry cycles.