聚二甲基硅氧烷微流控芯片的紫外光照射表面处理研究

研究了紫外光化学表面改性对聚二甲基硅氧烷(PDMS)微流控芯片的片基间粘接力及毛细管通道电渗流性能的影响.PDMS片基经紫外光射照后,粘接力增强,可实现PDMS芯片的永久性封合,同时亲水性得到改善,通道中的电渗流增大.与文献报道的等离子体表面处理方法比较,采用紫外光表面处理,设备简单,操作方便,耗费少,是一种简单易行的聚二甲基硅氧烷芯片表面处理方法.     

聚二甲基硅氧烷基质微流控芯片通道的氧气氛改性研究

通过将新制的PDMS微流控芯片置于氧气氛中对通道表面进行处理的简单方法,使电渗流大小及稳定性有了显著的改善。同时研究了氧气处理PDMS通道表面的时间对电渗流的影响,得到氧气处理的最佳时间为3d。讨论了氧气作用于PDMS芯片表面的机理。在氧气处理3d的PDMS微流控芯片上进行氨基酸分离实验,得到较好的分离效果。     

聚二甲基硅氧烷-聚苯乙烯复合微流控芯片室温不可逆封合法的研究

研究了一种基于紫外光/臭氧(UV/O₃)表面改性和硅烷化技术的聚二甲基硅氧烷(PDMS)与聚苯乙烯(PS)的不可逆封合的新方法. 首先, 用UV/O₃处理PS使其表面产生羟基、羧基等极性基团; 然后用3-氨丙基三乙氧基硅烷(APTES)对UV/O₃处理后的PS硅烷化, 使其表面形成氨丙基硅分子链; 再将硅烷化后的PS与拟封合的PDMS同时用UV/O₃处理, 使两者表面均产生硅羟基. 最后将处理后的PDMS与PS贴合, 通过硅羟基之间的缩合实现两者的不可逆封合. 以接触角、XPS和ATR-FT-IR对封合过程进行表征. 封合的PDMS-PS复合芯片可承受大于0.5 MPa的压强. 采用该方法制备了PDMS-PS复合微流控芯片用于HeLa细胞的培养. 实验表明, HeLa细胞在PDMS-PS复合芯片通道内的生长状况大大优于在全PS芯片、略好于在全PDMS芯片内的生长状况.     

功能化PDMS芯片的制作及其在氨基酸电泳分离中的应用

PDMS芯片表面具有强疏水性,不仅使水溶液很难充满其管道,电渗流不易控制~([1～3]),而且由于生物分子在其表面的强烈吸附还会导致芯片受污染,这些问题影响了PDMS在微流控中的应用.因此,PDMS芯片表面修饰已成为微全分析研究的热点之一.     

异质材料微流体通道电渗流热效应

本文对玻璃和聚二甲基硅氧烷(PDMS)材料制作的微流控芯片电渗流焦耳热效应进行数值研究.采用双电层的Poisson-Boltzmann方程,液体运动的Navier-Stokes方程和液-固耦合系统的热传导方程研究二维微通道电渗流的温度特性.研究发现:由于材料属性的差别,温度场和速度场在微通道断面存在不均匀性.微通道表面的温升会降低双电层的电荷密度.热效应会对电渗流速度场产生影响,并诱导压强梯度和改变外电场在微通道的变化特征.     

超支化聚合物化学键合毛细管电泳柱的制备及其对蛋白质的分离行为

分别合成了以三羟甲基丙烷和季戊四醇为核的超支化聚(胺-酯),并对其进行了红外测定、羟值测定、粘度测定等表征。采用化学键合方法将其涂于毛细管内壁,并测定涂层柱的电渗流以及对碱性蛋白质的分离能力,结果表明,涂层柱能有效地抑制碱性蛋白质在毛细管内壁上的吸附,大大降低电渗流;以三羟甲基丙烷为核的超支化聚(胺-酯)涂层柱的塔板数达105/m,而以季戊四醇为核的超支化聚(胺-酯)涂层柱的分离柱效更高,塔板数达107/m。实验结果表明这两类涂层柱都具有较好的分离效果和稳定性。     

十八烷基三氯硅烷改性超支化聚(胺-酯)吸附亚硝胺的研究

以十八烷基三氯硅烷对超支化聚(胺-酯)进行改性,合成了改性的超支化聚(胺-酯)。将改性前后的超支化聚合物用于吸附二甲基亚硝胺和二苯基亚硝胺。吸附结果表明,聚合物对二甲基亚硝胺和二苯基亚硝胺的吸附率分别为51.3%和11.9%,而改性后的超支化聚合物对二甲基亚硝胺和二苯基亚硝胺的吸附率分别为67.3%和37.2%。     

超支化聚酰胺酯改性聚甲基丙烯酸甲酯微流控芯片的制备及其在生物分子分离检测中的应用

利用亲水性超支化聚酰胺酯通过化学键合的方法对聚甲基丙烯酸甲酯(PMMA)微流控芯片的表面进行改性。对改性后PMMA微流控芯片的表面进行了接触角的测定,利用扫描电子显微镜(SEM)和体视显微镜观察了改性后芯片的表面形貌。结果表明,改性后的PMMA微流控芯片表面形成了一层均匀、致密、连续的亲水性涂层,芯片表面的亲水性得到了明显提高,接触角由未改性时的89.9°降低到29.5°。改性后芯片的电渗流较之改性前明显降低。利用芯片对腺苷和L-赖氨酸两种生物分子进行了分离检测。两种生物分子实现了完全分离,所得到的检测峰峰形尖锐,分离清晰。对腺苷和L-赖氨酸的分离柱效(理论塔板数)分别高达8.44×104 塔板/m和9.82×104 塔板/m,分离度(Rs)达到5.31,均远远高于未改性的芯片。改性后的芯片具有良好的分离时间重现性。本研究为提高PMMA微流控芯片的亲水性和应用范围提供了一种新的有效方法。     

超支化聚胺-酯改性聚硅氧烷及纳米银导电胶的制备与性能

利用端羟基超支化聚胺-酯(HBP3-OH)与马来酸酐的酯化反应,合成了含双键的超支化聚胺-酯(HBP3-MA),并用红外光谱和核磁共振光谱对HBP3-MA进行了表征.将HBP3-MA作为改性剂,液体硅橡胶为基体,镀银铜粉为导电填料,制备了改性硅橡胶导电复合材料.HBP3-MA参与到液体硅橡胶的固化,采用示差扫描量热仪(DSC)对复合体系的固化条件进行了研究.采用原位还原法在复合体系中生成纳米银,利用透射电子显微镜(TEM)、扫描电子显微镜(SEM)对银纳米粒子的形貌和复合体系的结构进行了表征,探讨了纳米粒子增强复合物体系导电性的机理,即银纳米粒子具有低温烧结的特性,固化时可在镀银铜粉表面烧结,降低了镀银铜粉之间的接触电阻.最后,对导电复合材料的导电性能和粘结性能进行了研究.研究发现,当醋酸银用量为4.4份时,导电复合材料的体积电阻率和剪切强度均达到最佳值,分别为3.6×10-3Ω·cm和0.32 MPa.     

新型超支化聚合物涂层毛细管电泳柱的制备及评价

以 1,1,1 三羟甲基丙烷、丙烯酸甲酯和二乙醇胺为原料合成出超支化聚 (胺 酯 ) ,通过物理吸附方法将其涂布于熔融毛细管柱内表面 ;该方法制备的涂层柱能有效地抑制电渗流和蛋白质在毛细管壁的吸附作用 ;在pH 5 .0的缓冲液中 ,碱性蛋白质的平均柱效为 5 .1× 10 5理论塔板数 /m ,且涂层具有良好的稳定性     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.