Kristallzucht und Strukturverfeinerung von Quecksilber(II)‐amidchlorid – HgClNH2

Crystal Growth and Refinement of the Crystal Structure of Mercury(II) Amide Chloride – HgClNH₂ Single crystals were prepared by recrystallization of HgClNH₂ from aqueous NH₃/NH₄⁺ solution at 160 °C. They were used for a single‐crystal X‐ray structure redetermination. The previously reported [W. N. Lipscomb, Acta. Crystallogr. 1951 , 4, 266.] structural topology determined on basis of X‐ray powder diffraction data is now confirmed. However, a higher symmetry is found: Space group type Pmma (instead of Pmm2), a = 6.709(1) Å, b = 4.351(1) Å, c = 5.154(1) Å, Z = 2. The crystal structure contains zig‐zag‐chains [Hg(NH₂)_2/2]⁺. Four Cl atoms complete the coordination sphere of Hg to a distorted octahedron. These share common faces and edges in layers [HgCl_4/4(NH₂)_2/2]. These layers are connected via hydrogen bonds N–H…Cl.     

Synthese und Kristallstrukturen der Nitrido‐Chloro‐Molybdate [Mg(THF)4{NMoCl4(THF)}2] · 4 CH2Cl2 und [Li(12‐Krone‐4)(NMoCl4)]2 · 2 CH2Cl2

Syntheses and Crystal Structures of the Nitrido‐chloro‐molybdates [Mg(THF)₄{NMoCl₄(THF)}₂] · 4 CH₂Cl₂ and [Li(12‐Crown‐4)(NMoCl₄)]₂ · 2 CH₂Cl₂ Both the title compounds as well as [Li(12‐crown‐4)₂]⁺MoNCl₄^– were made from MoNCl₃ and the chlorides MgCl₂ and LiCl, respectively, in dichloromethane suspensions in the presence of tetrahydrofuran and 12‐crown‐4, respectively. They form orange‐red moisture‐sensitive crystals, which were characterized by their IR spectra and partly by crystal structure analyses. [Mg(THF)₄{NMoCl₄(THF)}₂] · 4 CH₂Cl₂ ( 1 ): space group C2/m, Z = 2, lattice dimensions at –50 °C: a = 1736.6(1), b = 1194.8(1), c = 1293.5(2) pm; β = 90.87(1)°; R₁ = 0.037. In 1 the magnesium ion is coordinated octahedrally by the oxygen atoms of the four THF molecules and in trans‐position by the nitrogen atoms of the two [N≡MoCl₄(THF)]^– ions. [Li(12‐crown‐4)(NMoCl₄)]₂ · 2 CH₂Cl₂ ( 2 ): space group P 1, Z = 1, lattice dimensions at –70 °C: a = 930.4(1), b = 957.9(1), c = 1264.6(1) pm; α = 68.91(1)°, β = 81.38(1)°, γ = 63.84(1)°; R₁ = 0.0643. 2 forms a centrosymmetric ion ensemble in the dimeric cation of which, i. e. [Li(12‐crown‐4)]₂²⁺, the lithium ions on the one hand are connected to the four oxygen atoms each of the crown ether molecules in a way not yet known; and in addition, each of the lithium ions enters into a intermolecular Li–O bond with neighboring crown ether molecules under formation of a Li₂O₂ four‐membered ring. The two N≡MoCl₄^– counterions are loosely coordinated to one oxygen atom each of the crown ether molecules with Mo–O distances of 320.2 pm.     

Zwei Mercuri‐Ammin‐Komplexe: [Hg(NH3)2][HgCl3]2 und [Hg(NH3)4](ClO4)2

Two Mercuric Ammoniates: [Hg(NH₃)₂][HgCl₃]₂ and [Hg(NH₃)₄](ClO₄)₂ [Hg(NH₃)₂][HgCl₃]₂ ( 1 ) is obtained by saturating an equimolar solution of HgCl₂ and NH₄Cl with Hg(NH₂)Cl at 75 °C. 1 crystallizes in the orthorhombic space group Pmna with a = 591.9(1) pm, b = 800.3(1) pm, c = 1243.3(4) pm, Z = 2. The structure consists of linear cations [Hg(NH₃)₂]²⁺ and T‐shaped anions [HgCl₃]^—. The coordination sphere of mercury is ?effectively”? completed to compressed hexagonal bipyramids and distorted octahedra, respectively. Single crystals of [Hg(NH₃)₄](ClO₄)₂ ( 2 ) are obtained by passing gaseous ammonia through a solution of mercuric perchlorate, while the solution was cooled to temperatures below 10 °C. 2 crystallizes in the monoclinic space group P2₁/c with a = 791.52(9) pm, b = 1084.3(2) pm, c = 1566.4(2) pm, β = 120.352(1)°, Z = 4. The structure consists of compressed [Hg(NH₃)₄]²⁺ tetrahedra and perchlorate anions. The packing of the heavy atoms Hg and Cl is analogous to the baddeleyite (α‐ZrO₂) type of structure.     

Neue Kronenether‐stabilisierte Oxoniumhalogenochalkogenate: [H3O(Dibromo‐benzo‐18‐Krone‐6)]2[Se3Br10] und [H5O2(Bis‐dibromo‐dibenzo‐24‐Krone‐8]2[Se3Br8]

Novel Oxonium Halogenochalcogenates Stabilized by Crown Ethers: [H₃O(Dibromo‐benzo‐18‐crown‐6)]₂[Se₃Br₁₀] and [H₅O₂(Bis‐dibromo‐dibenzo‐24‐crown‐8]₂[Se₃Br₈] Two novel complex oxonium bromoselenates(II,IV) and –(II) are reported containing [H₃O]⁺ and [H₅O₂]⁺ cations coordinated by crown ether ligands. [H₃O(dibromo‐benzo‐18‐crown‐6)]₂[Se₃Br₁₀] ( 1 ) and [H₅O₂(bis‐dibromo‐dibenzo‐24‐crown‐8]₂[Se₃Br₈] ( 2 ) were prepared as dark red crystals from dichloromethane or acetonitrile solutions of selenium tetrabromide, the corresponding unsubstituted crown ethers, and aqueous hydrogen bromide. The products were characterized by their crystal structures and by vibrational spectra. 1 is triclinic, space group (Nr. 2) with a = 8.609(2) Å, b = 13.391(3) Å, c = 13.928(3) Å, α = 64.60(2)°, β = 76.18(2)°, γ = 87.78(2)°, V = 1404.7(5) ų, Z = 1. 2 is also triclinic, space group with a = 10.499(2) Å, b = 13.033(3) Å, c = 14.756(3) Å, α = 113.77(3)°, β = 98.17(3)°, γ = 93.55(3)°. V = 1813.2(7) ų, Z = 1. In the reaction mixture complex redox reactions take place, resulting in (partial) reduction of selenium and bromination of the crown ether molecules. In 1 the centrosymmetric trinuclear [Se₃Br₁₀]^2? consists of a central Se^IVBr₆ octahedron sharing trans edges with two square planar Se^IIBr₄ groups. The novel [Se₃Br₈]^2? in 2 is composed of three planar trans‐edge sharing Se^IIBr₄ squares in a linear arrangement. The internal structure of the oxonium‐crown ether complexes is largely determined by the steric restrictions imposed by the aromatic rings in the crown ether molecules, as compared to complexes with more flexible unsubstituted crown ether ligands.     

Unusual centrosymmetric structure of [M(18‐crown‐6)]+ (M = Rb,Cs and NH4) complexes stabilized in an environment of hexachloridoantimonate(V) anions

In (1,4,7,10,13,16‐hexaoxacyclooctadecane)rubidium hexachloridoantimonate(V), [Rb(C₁₂H₂₄O₆)][SbCl₆], (1), and its isomorphous caesium {(1,4,7,10,13,16‐hexaoxacyclooctadecane)caesium hexachloridoantimonate(V), [Cs(C₁₂H₂₄O₆)][SbCl₆]}, (2), and ammonium {ammonium hexachloridoantimonate(V)–1,4,7,10,13,16‐hexaoxacyclooctadecane (1/1), (NH₄)[SbCl₆]·C₁₂H₂₄O₆}, (3), analogues, the hexachloridoantimonate(V) anions and 18‐crown‐6 molecules reside across axes passing through the Sb atoms and the centroids of the 18‐crown‐6 groups, both of which coincide with centres of inversion. The Rb⁺ [in (1)], Cs⁺ [in (2)] and NH₄⁺ [in (3)] cations are situated inside the cavity of the 18‐crown‐6 ring; they are situated on axes and are equally disordered about centres of inversion, deviating from the centroid of the 18‐crown‐6 molecule by 0.4808 (13), 0.9344 (7) and 0.515 (8) Å, respectively. Interaction of the ammonium cation and the 18‐crown‐6 group is supported by three equivalent hydrogen bonds [N...O = 2.928 (3) Å and N—H...O = 162°]. The centrosymmetric structure of [Cs(18‐crown‐6)]⁺, with the large Cs⁺ cation approaching the centre of the ligand cavity, is unprecedented and accompanied by unusually short Cs—O bonds [2.939 (2) and 3.091 (2) Å]. For all three compounds, the [M(18‐crown‐6)]⁺ cations and [SbCl₆]⁻ anions afford linear stacks along the c axis, with the cationic complexes embedded between pairs of inversion‐related anions.     

Die Kristallstrukturen einer Serie von Verbindungen mit Kationen des Typs [R3PNH2]+, [R3PN(H)SiMe3]+ und [R3PN(SiMe3)2]+

Crystal Structures of a Series of Compounds with Cations of the Type [R₃PNH₂]⁺, [R₃PN(H)SiMe₃]⁺, and [R₃PN(SiMe₃)₂]⁺ The crystal structures of a series of compounds with cations of the type [R₃PNH₂]⁺, [R₃PN(H)SiMe₃]⁺, and [R₃PN(SiMe₃)₂]⁺, in which R represents various organic residues, are determined by means of X‐ray structure analyses at single crystals. The disilylated compounds [Me₃PN(SiMe₃)₂]⁺I^–, [Et₃PN(SiMe₃)₂]⁺I^–, and [Ph₃PN(SiMe₃)₂]⁺I₃^– are prepared from the corresponding silylated phosphaneimines R₃PNSiMe₃ with Me₃SiI. [Me₃PNH₂]Cl (1): Space group P2₁/n, Z = 4, lattice dimensions at –71 °C: a = 686.6(1), b = 938.8(1), c = 1124.3(1) pm; β = 103.31(1)°; R = 0.0239. [Et₃PNH₂]Cl (2): Space group Pbca, Z = 8, lattice dimensions at –50 °C: a = 1272.0(2), b = 1147.2(2), c = 1302.0(3) pm; R = 0.0419. [Et₃PNH₂]I (3): Space group P2₁2₁2₁, Z = 4, lattice dimensions at –50 °C: a = 712.1(1), b = 1233.3(2), c = 1257.1(2) pm; R = 0.0576. [Et₃PNH₂]₂[B₁₀H₁₀] (4): Space group P2₁/n, Z = 4, lattice dimensions at –50 °C: a = 809.3(1), b = 1703.6(1), c = 1800.1(1) pm; β = 96.34(1)°; R = 0.0533. [Ph₃PNH₂]ICl₂ (5): Space group P1, Z = 2, lattice dimensions at –60 °C: a = 825.3(3), b = 1086.4(3), c = 1241.2(4) pm; α = 114.12(2)°, β = 104.50(2)°, γ = 93.21(2)°; R = 0.0644. In the compounds 1–5 the cations are connected with their anions via hydrogen bonds of the NH₂ groups with 1–3 forming zigzag chains. [Me₃PN(H)SiMe₃][O₃S–CF₃] (6): Space group P2₁/c, Z = 8, lattice dimensions at –83 °C: a = 1777.1(1), b = 1173.6(1), c = 1611.4(1) pm; β = 115.389(6)°; R = 0.0332. [Et₃PN(H)SiMe₃]I (7): Space group P2₁/n, Z = 4, lattice dimensions at –70 °C: a = 1360.2(1), b = 874.2(1), c = 1462.1(1) pm; β = 115.19(1)°; R = 0.066. In 6 and 7 the cations form ion pairs with their anions via NH … X hydrogen bonds. [Me₃PN(SiMe₃)₂]I (8): Space group P2₁/c, Z = 8, lattice dimensions at –60 °C: a = 1925.4(9), b = 1269.1(1), c = 1507.3(4); β = 111.79(3)°; R = 0.0581. [Et₃PN(SiMe₃)₂]I (9): Space group Pbcn, Z = 8, lattice dimensions at –50 °C: a = 2554.0(2), b = 1322.3(1), c = 1165.3(2) pm; R = 0.037. [Ph₃PN(SiMe₃)₂]I₃ (10): Space group P2₁, Z = 2, lattice dimensions at –50 °C: a = 947.7(1), b = 1047.6(1), c = 1601.6(4) pm; β = 105.96(1)°; R = 0.0334. 8 to 10 are built up from separated ions.     

Cs[Yb(NPPh3)4] – ein homoleptischer Phosphaniminato‐Komplex des Ytterbiums

Cs[Yb(NPPh₃)₄] – a Homoleptic Phosphoraneiminato Complex of Ytterbium Cesium tetrakis(phosphoraneiminato)ytterbate, Cs[Yb(NPPh₃)₄] ( 1 ) has been prepared by the reaction of the dimeric complex [Yb(NPPh₃)₃]₂ with CsNPPh₃ in thf solution. 1 crystallizes from thf solution to give colourless moisture sensitive crystals which contain three molecules thf per asymmetric unit. According to the crystal structure determination 1 forms a dimeric ion ensemble [Cs{Yb(NPPh₃)₄}]₂ in which the Cs⁺ ions connect the [Yb(NPPh₃)₄]^– ions via Cs…N bridges. The ytterbium atoms are distorted tetrahedrally coordinated by the nitrogen atoms of the phosphoraneiminato ligands (NPPh₃^–) with short Yb–N‐bond lengths between 212.1 and 221.9(8) pm. The included thf molecules are without bonding contacts with the complex. [Cs{Yb(NPPh₃)₄}]₂ · 6 thf: Space group P 1, Z = 2, lattice dimensions at 193 K: a = 1837.2(2), b = 2041.5(2), c = 2095.8(2) pm, α = 79.953(13)°, β = 79.364(11)°, γ = 88.239(12)°, R = 0.0625.     

HgCl2(Caf): Co‐crystallization of Mercuric Chloride and Caffeine

Colourless single crystals of the co‐crystallizate of mercuric chloride and caffeine, HgCl₂(Caf), were obtained from an ethanolic solution of mercuric chloride, HgCl₂, and caffeine (Caf) and recrystallized from hot water. The crystal structure (monoclinic, P2₁, Z = 2, a = 398.36(8), b = 1964.5(4), c = 809.6(2) pm, β = 99.24(3)°, Z = 2, R₁ = 0.0584 for 1430 F_o > 4σ(F_o)) contains helical chains (parallel to the 2₁ screw axis) of almost unaffected HgCl₂ molecules and caffeine molecules which are very weakly bound to one keto‐oxygen atom (O4) of one and N9 of a second caffeine molecule at distances of 282 and 281 pm, respectively. To the contrary, theoretical calculations show that the molecule HgCl₂(Caf)₂ is stable (in the gas phase at T = 0 K) with surprisingly strong bonding as indicated by the “tetrahedrization” of the molecule.     

Die Reaktion von Ytterbium mit N‐Iod‐triphenylphosphanimin. Kristallstrukturen von [Yb2I(THF)2(NPPh3)4] · 2 THF, [YbI2(HNPPh3)(DME)2] und [{YbI2(DME)2}2(μ‐DME)]

The Reaction of Ytterbium with N‐iodo‐triphenylphosphaneimine. Crystal Structures of [Yb₂I(THF)₂(NPPh₃)₄] · 2 THF, [YbI₂(HNPPh₃)(DME)₂], and [{YbI₂(DME)₂}₂(μ‐DME)] When treated with ultrasound, the reaction of ytterbium powder with INPPh₃ in tetrahydrofuran leads to [YbI₂(THF)₄] and to the mixed‐valence phosphoraneiminato complex [Yb₂I(THF)₂(NPPh₃)₄] · 2 THF ( 1 ), which forms red single‐crystals. In the analogous reaction in 1,2‐dimethoxyethane (DME) only the ytterbium(II) iodide solvates [YbI₂(HNPPh₃)(DME)₂] ( 2 ) and [{YbI₂(DME)₂}₂ · (μ‐DME)] ( 3 ) can be isolated, which form yellow single crystals. All compounds were characterized by crystal structure analyses. 1 : Space group P1, Z = 2, lattice dimensions at –80 °C: a = 1337.6(5), b = 1389.6(5), c = 2244.2(17) pm; α = 86.11(7)°, β = 88.06(7)°, γ = 88.63(4)°; R = 0.0759. In 1 the two ytterbium atoms are connected via the N atoms of two phosphoraneiminato groups (NPPh₃^–) to form a planar Yb₂N₂ four‐membered ring. The structure can also be described as an ion pair consisting of [YbI(THF)₂]⁺ and [Yb(NPPh₃)₄]^–. 2 : Space group P2₁, Z = 2, lattice dimensions at –80 °C: a = 811.9(1), b = 1114.0(1), c = 1741.3(1) pm; β = 95.458(5)°; R = 0.0246. 2 forms molecules in which the ytterbium atom is coordinated in a pentagonal‐bipyramidal fashion with the iodine atoms in the axial positions. The O atoms of the two DME‐chelates and the N atom of the phosphaneimine ligand HNPPh₃ are in the equatorial positions. 3 : Space group P1, Z = 2, lattice dimensions at –70 °C: a = 817.5(1), b = 1047.7(1), c = 1115.5(2) pm; α = 90.179(10)°, β = 97.543(15)°, γ = 91.087(12)°; R = 0.0317. 3 has a dimeric molecular structure, in which the two fragments {YbI₂(DME)₂} are connected centrosymmetrically via a μ‐DME bridge. As in 2 , the ytterbium atoms are coordinated in a pentagonal‐bipyramidal fashion with the iodine atoms in the axial positions, as well as with the two DME chelates and with one O atom each of the μ‐DME ligand in the equatorial positions.     

2‐Imino‐3‐allyl‐benzothiazole as a π‐Ligand: Synthesis and Crystal Structure of [(CuCl)C10H10SN2], [C10H11SN2+]2[Cu2Cl4]2−, and [C10H11SN2+]2[Cu2Br4]2− π‐Compounds

The reaction of 2‐amino‐benzothiazole with allyl bromide resulted in a mixture of 2‐imino‐3‐allyl‐benzothiazole and 2‐imino‐3‐allyl‐benzothiazolium bromide.Using such a mixture and copper(II) chloride in acetonitrile solution in alternating‐current electrochemical synthesis crystals of the [(CuCl)C₁₀H₁₀SN₂] ( I ) have been obtained. The same procedure, performed in ethanol solution, has led to formation of [C₁₀H₁₁SN₂⁺]₂[Cu₂Cl₄]^2? ( II ). In the same manner the bromine derivative [C₁₀H₁₁SN₂⁺]₂[Cu₂Br₄]^2? ( III ) has been synthesized. All three compounds were X‐ray structurally investigated. I :monoclinic space group P2₁/n, a = 13.789(6), b = 6.297(3), c = 13.830(6) Å, β = 112.975(4)°, V = 1105.6 (9) ų, Z = 4 for CuCl·C₁₀H₁₀ SN₂ composition. Compounds II and III are isomorphous and crystallize in triclinic space group. II a = 7.377(3), b = 8.506(3), c = 9.998(4) Å, α = 79.892(10)°, β = 82.704(13)°, γ = 78.206(12)°, V = 601.9(4) ų, Z = 1. III a = 7.329(2), b = 8.766(3), c = 10.265(3) Å, α = 79.253(9)°, β = 82.625(9)°, γ = 77.963(9)°, V = 630.9(3) ų, Z = 1. In the structure I [(CuCl)C₁₀H₁₀SN₂] building blocks are bound into infinitive spiral‐like chains via strong N‐H..Cl hydrogen bonds. In the zwitter‐ionic II and III compounds copper and halide atoms form centrosymmetric [Cu₂X₄]^2? anions, which are interconnected via N‐H..X hydrogen bonds into infinite butterfly‐like chains. The strongest Cu‐(C=C) π‐interaction has been observed in structure I , where copper possesses coordination number 3. Increasing copper coordination number to 4 in II as well as replacing chlorine atoms by bromine ones in III suppresses markedly this interaction.     

Chloro‐N′,N′‐dimethylformamidinium‐(dimethylcyanamid)trichloroberyllat, [Me2NC(Cl)NH2]+[BeCl3(NCNMe2)]−

Chloro‐N′,N′‐dimethylformamidinium‐(dimethylcyanamide)trichloroberyllate, [Me₂NC(Cl)NH₂]⁺[BeCl₃(NCNMe₂)]^? Chloro‐N′,N′‐dimethylformamidinium‐(dimethylcyanamide)trichloroberyllate, [Me₂NC(Cl)NH₂]⁺[BeCl₃(NCNMe₂)]^? was prepared from BeCl₂ with two equivalents of dimethylcyanamide in CH₂Cl₂ suspension. The compound was characterized by X‐ray crystallography and by IR spectroscopy. Space group , Z = 2, lattice dimensions at 193 K: a = 620.7(1), b = 744.9(2), c = 1520.3(3) pm, α = 96.87(2)°, β = 100.41(2)°, γ = 100.17(2)°, R₁ = 0.0443. Cations and anions form N–H…Cl hydrogen bridges along [010].     

Synthese und Kristallstrukturen der homoleptischen Phosphaniminato‐Kationen [E(NPPh3)3]+ (E = S,Se, Te) mit Iodid und Triiodid als Gegenionen

Synthesis and Crystal Structures of the homoleptic Phosphoraneiminato Cations [E(NPPh₃)₃]⁺ (E = S, Se, Te) with Iodide and Triiodide Counter Ions N‐Iod‐triphenylphosphaneimine, INPPh₃, reacts with the chalcogenes sulfur, selenium and tellurium in boiling tetrahydrofuran to give the phosphoraneiminato complexes [E(NPPh₃)₃]⁺[¹/₂ I₃^–, ¹/₂ I^–] · THF (E = S ( 1 ), E = Se ( 2 )) and [Te(NPPh₃)₃]⁺I₃^– ( 3 ), respectively. The componds form red crystals which are characterized by IR spectroscopy and by crystal structure determinations. The homoleptic cations [E(NPPh₃)₃]⁺ have pyramidal structures with short EN and PN bond lengths, corresponding to double bonds. 1 : Space group Pa 3, Z = 8, lattice dimensions at –80 °C: a = b = c = 2192.9(1) pm, R₁ = 0.0299. 2 : Space group Pa 3, Z = 8, lattice dimensions at –80 °C: a = b = c = 2202.5(1) pm, R₁ = 0.0357. 3 : Space group Pca2₁, Z = 4, lattice dimensions at –90 °C; a = 1075.8(2); b = 1988.8(4); c = 2437.2(3) pm, R₁ = 0.0443.     

A Novel Cu(Ⅱ） Complex with 2,2′-Bipyridyl and L-Methioninate -synthesis,Characterization,Molecular Structure and Stability

The ternary Cu(II) complex with 2,2′‐bipyridyl (bipy) and L‐methioninate (L‐Met) has been synthesized and characterized by elemental analysis, molar conductivity, UV‐Vis spectra, IR spectra and pH‐potentiometric titration methods. The structure of the complex [Cu(L‐Met) (bipy) (H₂O)]ClO₄ · 3/8H₂O was characterized by the X‐ray diffraction analysis. It crystallizes in the triclinic system, space group P1 with four molecules in a unit cell of dimensions, a = 0.7656(2) nm, b = 1.3142(3) nm, c = 2.0596(4) nm, α = 97.70(3)°, β = 97.96(3)°, γ = 94.33(3)°, V= 2.0244(8) nm³, R₁, = 0.0441 and wR₂ = 0.0678. The crystal contains four crystllographically independent [Cu(L‐Met) (bipy) (H₂O)]⁺ complexes (Cu1—Cu4), having a distorted square‐pyramidal geometry with the same coordinated atoms around each copper center. The base plane is occupied by two nitrogen atoms of one bipy, the amino nitrogen atom and one carboxylate oxygen atom from each independent L‐Met moiety, and one water oxygen at an axial position. Cu1 and Cu3 are essentially enantiomers of Cu2 and Cu4. The four molecules are packed with each other by intermolecular hydrogen‐bonding and aromatic‐ring stacking interactions.     

Drei Alkalimetall‐Erbium‐Thiophosphate: Von der Schichtstruktur bei KEr[P2S7] zur dreidimensionalen Vernetzung in NaEr[P2S6] und Cs3Er5[PS4]6

Three Alkali‐Metal Erbium Thiophosphates: From the Layered Structure of KEr[P₂S₇] to the Three‐Dimensional Cross‐Linkage in NaEr[P₂S₆] and Cs₃Er₅[PS₄]₆ The three alkali‐metal erbium thiophosphates NaEr[P₂S₆], KEr[P₂S₇], and Cs₃Er₅[PS₄] show a small selection of the broad variety of thiophosphate units: from ortho‐thiophosphate [PS₄]^3? and pyro‐thiophosphate [S₃P–S–PS₃]^4? with phosphorus in the oxidation state +V to the [S₃P–PS₃]^3? anion with a phosphorus‐phosphorus bond (d(P–P) = 221 pm) and tetravalent phosphorus. In spite of all differences, a whole string of structural communities can be shown, in particular for coordination and three‐dimensional linkage as well as for the phosphorus‐sulfur distances (d(P–S) = 200 – 213 pm). So all three compounds exhibit eightfold coordinated Er³⁺ cations and comparably high‐coordinated alkali‐metal cations (CN(Na⁺) = 8, CN(K⁺) = 9+1, and CN(Cs⁺) ≈ 10). NaEr[P₂S₆] crystallizes triclinically ( ; a = 685.72(5), b = 707.86(5), c = 910.98(7) pm, α = 87.423(4), β = 87.635(4), γ = 88.157(4)°; Z = 2) in the shape of rods, as well as monoclinic KEr[P₂S₇] (P2₁/c; a = 950.48(7), b = 1223.06(9), c = 894.21(6) pm, β = 90.132(4)°; Z = 4). The crystal structure of Cs₃Er₅[PS₄] can also be described monoclinically (C2/c; a = 1597.74(11), b = 1295.03(9), c = 2065.26(15) pm, β = 103.278(4)°; Z = 4), but it emerges as irregular bricks. All crystals show the common pale pink colour typical for transparent erbium(III) compounds.     

One‐dimensionally linked Chain Crown Ether Complexes. Syntheses and Crystal Structures of Complexes [K(18‐Crown‐6)]2[M(SeCN)4](H2O) (M = Pd,Pt)

18‐crown‐6(18‐C‐6) complexes with K₂[M(SeCN)₄] (M = Pd, Pt): [K(18‐C‐6)]₂[Pd(SeCN)₄] (H₂O) ( 1 ) and [K(18‐C‐6)]₂[Pt(SeCN)₄](H₂O) ( 2 ) have been isolated and characterized by elemental analysis, IR spectroscopy and single crystal X‐ray analysis. The complexes crystallize in the monoclinic space group P2₁/n with cell dimensions: 1 : a = 1.1159(3) Å, b = 1.2397(3) Å, c = 1.6003(4) Å, β = 92.798(4)°, V = 2.2111(8) ų, Z = 2, F(000) = 1140, R₁ = 0.0418, wR₂ = 0.0932 and 2 : a = 1.1167(3) Å, b = 1.2394(3) Å, c = 1.5968(4) Å, β = 92.945(4)°, V = 2.2071(9) ų, Z = 2, F(000) = 1204, R₁ = 0.0341, wR₂ = 0.0745. Both complexes form one‐dimensionally linked chains of [K(18‐C‐6)]⁺ cations and [M(SeCN)₄]^2— (M = Pd, Pt) anions bridged by K‐O‐K interactions between adjacent [K(18‐C‐6)]⁺ units.     

Oxidative Addition von N‐Chlortriphenylphosphanimin an Phosphortrichlorid und Antimontrichlorid. Kristallstrukturen von (Cl3PNPPh3)2[PCl6][ClHCl],[SbCl4(HNPPh3)2][SbCl6] und [Sb(NPPh3)4][SbCl6]

Oxidative Addition of N‐chlorotriphenylphosphoraneimine onto Phosphorus(III) Chloride and Antimony(III) Chloride. Crystal Structures of (Cl₃PNPPh₃)₂[PCl₆][ClHCl], [SbCl₄(HNPPh₃)₂][SbCl₆], and [Sb(NPPh₃)₄][SbCl₆] Phosphorus(III) chloride reacts with N‐chlorotriphenylphosphoraneimine, ClNPPh₃, in CH₂Cl₂ solution strongly exothermically via oxidative addition to give (Cl₃PNPPh₃)₂[PCl₆][ClHCl] ( 1 ). As a by‐product, Ph₃PNP(O)Cl₂ can be obtained, which is formed from PCl₃ and ClNPPh₃ in the presence of POCl₃. In contrast to these results, antimony(III) chloride reacts with ClNPPh₃ in CH₂Cl₂ solution to give a mixture of the phosphoraneimine complex [SbCl₄(HNPPh₃)₂][SbCl₆] ( 2 ) and the phosphoraneiminato complex [Sb(NPPh₃)₄][SbCl₆] ( 3 ). The complexes 1 ‐ 3 were characterized by IR spectroscopy and by single crystal X‐ray determinations. 1 : Space group C2/c, Z = 4, lattice dimensions at 193 K: a = 3282.0(2), b = 798.7(1), c = 1926.1(2) pm, β = 107.96(1)°, R₁ = 0.0302. 1 contains [Cl₃PNPPh₃]⁺ cations with PN bond lengths of 152.5(2) and 160.9(2) pm, and a PNP bond angle of 140.5(1)°. 2 ·CH₂Cl₂: Space group , Z = 2, lattice dimensions at 193 K: a = 1031.2(1), b = 1448.3(2), c = 1811,4(2) pm, α = 70.96(1)°, β = 87.67(1)°, γ = 75.37(1)°, R₁ = 0.0713. 2 ·CH₂Cl₂ contains cations [SbCl₄(HNPPh₃)₂]⁺ with octahedrally coordinated Sb atom and the HNPPh₃ ligand molecules being in trans‐position. Sb–N bond lengths are 207.6(6) and 209.3(6) pm, PN bond lengths 162.3(7) and 160.8(7), which approximately corresponds with double bonds. 3 ·0.5CH₂Cl₂: Space group P4/n, Z = 2, lattice dimensions at 193 K: a = b = 1678.8(1), c = 1244.3(1) pm, R₁ = 0.0618. 3 ·0.5CH₂Cl₂ contains [Sb(NPPh₃)₄]⁺ cations with tetrahedrally coordinated Sb atom and short Sb–N bond lengths of 193.7(6) pm. The PN distances of the phosphoraneiminato ligands, (NPPh₃)^? with 156.5(6) pm, correspond with double bonds, the SbNP bond angles are 130.6(3)°.     

Synthesis,Characterization and Molecular Structure of Ternary Cu(II) Complex with 1, 4, 8, 9‐Tetraazatriphenylene and L‐Phenylaninate

The complex [Cu(L‐Phe)(TATP)(H₂O)]ClO₄.0.5H₂O has been synthesized and investigated by elemental analysis, molar conductivity, spectroscopic and X‐ray diffraction methods, where TATP= 1,4,8,9‐tetraazatriphenylene and L‐phe = L‐phenylaninate group. The complex crystallizes in the triclinic space group PI with two molecules in a unit cell of dimensions a=0.5730(l), b = 1.0190(2), c = 2.1430(4), α= 97.50 (1)°, β = 95.33(3)°, γ= 102.85(1)°, V= 1.1998(4) nm³, R₁ = 0.0360, wR₂ = 0.0400. The crystal contains two independent [Cu(L‐Phe) (TATP)(H₂O)]⁺ complexes Cu1 and Cu2, having essentially the same distorted square‐pyramidal structure, where each Cu(II) ion coordinates two nitrogen atoms of TATP and the amino nitrogen and carboxylate oxygen atoms of L‐Phe in the equatorial positions and one water oxygen at an axial position.     

Die Reaktionen von Europium und Yttrium mit N‐Iod‐triphenylphosphanimin. Kristallstrukturen von [EuI2(DME)3], [Eu2I(NPPh3)5(DME)] und [Y2I(NPPh3)4(THF)4]+I3–

The Reactions of Europium and Yttrium with N‐Iodinetriphenylphosphoraneimine. Crystal Structures of [EuI₂(DME)₃], [Eu₂I(NPPh₃)₅(DME)] and [Y₂I(NPPh₃)₄(THF)₄]⁺I₃^– When treated with ultrasound, the reaction of europium metal with INPPh₃ in 1,2‐dimethoxyethane (DME) leads to the complexes [EuI₂(DME)₃] ( 1 ) and [Eu₂I(NPPh₃)₅(DME)] ( 2 ) which are separated from each other by fractional crystallization. On the other hand, the reaction of yttrium metal with INPPh₃ under similar conditions in THF gives the ionic phosphoraneiminato complex [Y₂I(NPPh₃)₄(THF)₄]⁺I₃^– ( 3 ). All complexes are characterized by crystal structure determinations. 1 : Space group P2₁, Z = 2, lattice dimensions at 188 K: a = 848.9(1); b = 1059.4(1); c = 1227.9(1) pm; β = 93.793(6)°; R = 0.0246. In the molecular structure of 1 the europium atom is eightfold coordinated with a bond angle I–Eu–I of 158.51°. 2 · 2 DME: Space group P1, Z = 2, lattice dimensions at 193 K: a = 1405.5(1); b = 1652.2(2); c = 2203.7(2) pm; α = 89.404(11)°; β = 72.958(11)°; γ = 78.657(11)°; R = 0.0391. In 2 the europium atoms are linked by the μ‐N‐atoms of two (NPPh₃^–) groups to form a planar Eu₂N₂ four‐membered ring. One of the Eu atoms is terminally coordinated by the N atoms of two (NPPh₃^–) groups, thus achieving a distorted tetrahedral surrounding. The second Eu atom is coordinated by the N atom of one (NPPh₃^–) group, by the terminally bounded iodine atom and by the oxygen atoms of the DME chelate, thus achieving a distorted octahedral surrounding. 3 · 6¹/₂ THF: Space group P1, Z = 2, lattice dimensions at 103 K: a = 1739.7(2); b = 1770.1(2); c = 2153.8(3) pm; α = 74.929(15)°; β = 84.223(14)°; γ = 64.612(12)°; R = 0.0638. In the cation [Y₂I(NPPh₃)₄(THF)₄]⁺ of 3 the yttrium atoms are linked by the μ‐N atoms of two (NPPh₃^–) groups as well as by the μ‐I atom. One (NPPh₃^–) ligand and two THF molecules complete the distorted octahedral coordination at each yttrium atom.     

Synthesis and crystal structure of [H5O2][Ru(CO)3Cl3] · SbCl3

Crystals of [H₅O₂][Ru(CO)₃Cl₃] · SbCl₃ are triclinic, space group P1 , with unit cell of dimensions: a = 7.129(2), b = 10.129(3), c = 10.997(3) Å, α = 75.40(2)°, β = 97.17(2)°; γ = 120.94(2)°. The structure was solved from X-ray diffractometer data by Patterson and Fourier synthesis and refined by full matrix least-squares method to R = 3.02% for 3268 independent reflections. The [Ru(CO)₃Cl₃]^? anion has an approximately octahedral fac configuration. The antimony atom has three chlorine neighbours at 2.387(2), 2.364(2) and 2.368(2) Å giving the expected angular conformation and three other neighbours at longer distances completing with the lone pair a monocaped octahedral environment around antimony. The acidic hydrogen has been transfered to two water molecules giving an asymmetric [H₅O₂]⁺ ion with a very short hydrogen bond of 2.373(9) Å.     

Three‐dimensional hydrogen‐bonded framework in bis(melamin‐1‐ium) naphthalene‐1,5‐disulfonate melamine pentahydrate

Crystals of the title compound, 2C₃H₇N₆⁺·C₁₀H₆O₆S₂²⁻·C₃H₆N₆·5H₂O, are built up of neutral 2,4,6‐triamino‐1,3,5‐triazine (melamine), singly protonated melaminium cations, naphthalene‐1,5‐disulfonate dianions and water molecules. Two independent anions lie across centres of inversion in the space group P. The melamine molecules are connected by N—H...N hydrogen bonds into two different one‐dimensional polymers almost parallel to the (010) plane, forming a stacking structure along the b axis. The centrosymmetric naphthalene‐1,5‐disulfonate anions interact with water molecules via O—H...O hydrogen bonds, forming layers parallel to the (001) plane. The cations and anions are connected by N—H...O and O—H...N hydrogen bonds to form a three‐dimensional supramolecular framework.