首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到10条相似文献,搜索用时 62 毫秒
1.
存在滑移时两圆球间的幂律流体挤压流动   总被引:9,自引:1,他引:9  
基于Reynolds润滑理论分析了壁面滑移对任意圆球颗粒间幂律流体的挤压流动的影响。研究表明有壁面滑移时挤压流动的粘性力可通过引进本文定义的滑移修正系数分离出无滑移解。推导出的挤压力滑移修正系数是一积分表达式,依赖于滑移参数、幂律指数、球间隙和积分上限。一般地壁面滑移导致粘性力减小,粘性力的减小量随幂律指数的增大而增大,表明壁面滑移对剪切增稠流变材料有更大的影响;粘性力的减小量还随着滑移参数的增大而增加,而这恰与假设相符合;粘性力的减小量又随球间隙减小或积分上限的增大(从液桥情况到完全浸渍)而减小直到趋于常数,这一特性在离散元模拟时可以有效地减少计算量。  相似文献   

2.
We present a hybrid numerical method for simulating fluid flow through a compliant, closed tube, driven by an internal source and sink. Fluid is assumed to be highly viscous with its motion described by Stokes flow. Model geometry is assumed to be axisymmetric, and the governing equations are implemented in axisymmetric cylindrical coordinates, which capture 3D flow dynamics with only 2D computations. We solve the model equations using a hybrid approach: we decompose the pressure and velocity fields into parts due to the surface forcings and due to the source and sink, with each part handled separately by means of an appropriate method. Because the singularly-supported surface forcings yield an unsmooth solution, that part of the solution is computed using the immersed interface method. Jump conditions are derived for the axisymmetric cylindrical coordinates. The velocity due to the source and sink is calculated along the tubular surface using boundary integrals. Numerical results are presented that indicate second-order accuracy of the method.  相似文献   

3.
锥形血管入口区域内管壁与血液的耦合运动   总被引:6,自引:0,他引:6  
本文研究了锥形血管入口区域内血管壁与血液间的耦合问题。对具有锥度角的弹性血管入口区域内的管壁运动和血液流动建立的相互耦合作用的数学模型,在满足相应的边界条件下求得了一组血液流动的速度分布公式、压力分布公式以及管壁运动公式,得出了一些重要的结论。  相似文献   

4.
Illarionov  A. I. 《Mathematical Notes》2001,69(5-6):614-624
We study the problem of optimal boundary control of two-dimensional steady-state flow of a viscous inhomogeneous incompressible fluid. The role of control is played by the values of the velocity on a part of the boundary of the domain considered. On the remaining part of the boundary, the vector of flow velocity and the fluid density are given. We seek the fluid density as a scalar function (determined by the initial data) of the stream function, study the solvability of the problem, and obtain necessary optimality conditions.  相似文献   

5.
We consider a viscous incompressible flow in an infinite horizontal domain bounded at the bottom by a smooth wall and at the top by a rough wall. The latter is assumed to consist in a plane wall covered with periodically distributed asperities which size depends on a small parameter, and with a fixed height. We assume that the flow is governed by the stationary Stokes equations. Using a boundary layer corrector we derive and analyze a first order asymptotic approximation of the flow.   相似文献   

6.
The purpose of this article is to perform an asymptotic analysis for an interaction problem between a viscous fluid and an elastic structure when the flow domain is a three-dimensional cylindrical tube. We consider a periodic, non-steady, axisymmetric, creeping flow of a viscous incompressible fluid through a long and narrow cylindrical elastic tube. The creeping flow is described by the Stokes equations and for the wall displacement we consider the Koiter's equation. The well posedness of the problem is proved by means of its variational formulation. We construct an asymptotic approximation of the problem for two different cases. In the first case, the stress term in Koiter's equation contains a great parameter as a coefficient and dominates with respect to the inertial term while in the second case both the terms are of the same order and contain the great parameter. An asymptotic analysis is developed with respect to two small parameters. Analysing the leading terms obtained in the second case, we note that the wave phenomena takes place. The small error between the exact solution and the asymptotic one justifies the below constructed asymptotic expansions.  相似文献   

7.
采用谱方法,在曲线坐标系下对不可压缩Newton流体的N-S方程进行求解,采用定义在物理空间中的流动物理量以避免使用协变、逆变形式的控制方程.在计算空间采用Fourier-Chebyshev谱方法进行空间离散,时间推进采用高精度时间分裂法.为了减小时间分裂带来的误差,采用了高精度的压力边界条件.与其他求解协变、逆变形式控制方程的谱方法相比,该方法在保持谱精度的同时减小了计算量.首先通过静止波形壁面和行波壁面槽道湍流的直接数值模拟,对该数值方法进行了验证;其次,作为初步应用,利用该方法研究了槽道湍流中周期振动凹坑所产生的流动结构.  相似文献   

8.
计及管道边界条件滑移的影响,研究微极流体蠕动泵,经由圆柱形管道输运的Stokes流动.壁面运动的控制方程为正弦波方程.使用润滑理论,得到了轴向速度、微转动向量、流函数、压力梯度、摩擦力和机械效率的解析数值解.用图形表示出构成参数,如像耦合参数、微极参数和表征蠕流泵特性的滑移参数、摩擦力和俘获现象的影响.数值计算表明,当耦合参数较大时,需要蠕动泵的压力更大,而微极参数和滑移参数正相反.俘获团块的大小随耦合参数和微极参数的减小而缩小,而随滑移参数的增大而缩小.  相似文献   

9.
Modeling the movement of a rigid particle in viscous fluid is a problem physicists and smathematicians have tried to solve since the beginning of this century. A general model for an ellipsoidal particle was first published by Jeffery in the twenties. We exploit the fact that Jeffery was concerned with formulae which can be used to compute numerically the velocity field in the neighborhood of the particle during his derivation of equations of motion of the particle. This is our principal contribution to the subject. After a thorough check of Jeffery's formulae, we coded software for modeling the flow around a rigid particle based on these equations. Examples of its applications are given in conclusion. A practical example is concerned with the simulation of sigmoidal inclusion trails in porphyroblast.  相似文献   

10.
Two-dimensional non-linear free-surface flows in a channel boundedbelow by an uneven bottom with rapid changes are considered.Numerical solutions are computed by a boundary integral equationmethod similar to that first introduced by King & Bloor(1987, J. Fluid Mech., 182, 193–208). Free-surface flowspast localized disturbances, steps and sluice gates are calculated.In addition, weakly non-linear solutions are discussed.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号