FT-IR analysis of chemical warfare agents

The qualitative and quantitative FT-IR analyses of dilute aqueous solutions of GA (tabun), GB (sarin), GD (soman), and VX were evaluated using the CIRCLE CELL^TM. Infrared spectra were recorded using a Nicolet 60SX FT-IR spectrometer fitted with a liquid nitrogencooled MCTA detector. The CIRCLE CELL^TM used a high pressure micro-flow-through sampling accessory fitted with a ZnSe internal reflection element. Peak heights were evaluated with the Nicolet SUPER QUANT program after spectral subtraction of the solvent. TheP=0 stretching absorption band, centered around 1240 cm^–1 for theG-type agents and 1180 cm^–1 for VX, produced good quantification. At a concentration of 2.0 mg/ml for theG-type agents and 1.0 mg/ml for VX, quantitative analysis produced coefficients of variation of 3% or less. The detection limit was observed to be around 0.1 mg/ml.This work was performed at the US Army Medical Research Institute of Chemical Defense and funded by the US Army Medical Research and Development Command under the provisions of the Intergovernmental Personnel Act of 1970 (P.L. 91-648).The opinions or assertions contained herein are the private views of the authors and are not to be construed as official or as reflecting the views of the Department of the Army or the Department of Defense     

荧光法检测化学战剂

化学战剂,包括神经性毒剂(如沙林、VX)和糜烂性毒剂(如芥子气),属于剧毒化学品,能够严重危害国家安全和环境安全.因此,针对各类化学战剂,开发简单、快速、可便携化、高灵敏度和高选择性的荧光检测技术具有重要的意义.本文综述了近年来国内外荧光法检测化学战剂的研究进展,并对该领域所面临的挑战和未来发展方向进行了总结和展望.     

Heat characteristics of chemical warfare agents

The heat characteristics of sulfur mustard (H), Lewisite (L), LI, LII, LIII, yellow agent (1:1 mass/mass H and L) and H heels were investigated by thermogravimetric - differential thermal analysis (TG-DTA). The object of this study was to provide details of the effectiveness of elevated temperature on the decomposition of these agents in both an active atmosphere (air) and an inert atmosphere (nitrogen). TG-DTA measured object mass change and heat radiation/absorption corresponding to regulated temperature changes of the test materials. All agents, with the exception of one of the H heels, exhibited an endotherm suggesting evaporation of the agents rather than oxidation.     

Utilisation of separation methods in the analysis of chemical warfare agents

Chemical warfare agents and their degradation products represent a broad group of compounds with different chemical properties (polarity, volatility, thermostability, etc.). These chemicals often have to be detected and determined in complex matrices and therefore highly efficient separation techniques hyphenated to selective and sensitive detectors play an indispensable role. This review offers an overview of selected papers devoted to the title subject. It cannot be considered as a comprehensive literature compilation but should allow the reader to obtain an insight into the application of separation techniques in the important area of human protection and control of chemical weapons.     

Fluorescent sensors for the detection of chemical warfare agents

Along with biological and nuclear threats, chemical warfare agents are some of the most feared weapons of mass destruction. Compared to nuclear weapons they are relatively easy to access and deploy, which makes them in some aspects a greater threat to national and global security. A particularly hazardous class of chemical warfare agents are the nerve agents. Their rapid and severe effects on human health originate in their ability to block the function of acetylcholinesterase, an enzyme that is vital to the central nervous system. This article outlines recent activities regarding the development of molecular sensors that can visualize the presence of nerve agents (and related pesticides) through changes of their fluorescence properties. Three different sensing principles are discussed: enzyme-based sensors, chemically reactive sensors, and supramolecular sensors. Typical examples are presented for each class and different fluorescent sensors for the detection of chemical warfare agents are summarized and compared.     

Derivatisation reactions in the chromatographic analysis of chemical warfare agents and their degradation products

The analysis of chemical warfare agents and their degradation products is an important component of verification of compliance with the Chemical Weapons Convention. Gas and liquid chromatography, particularly combined with mass spectrometry, are the major techniques used to detect and identify chemicals of concern to the Convention. The more polar analytes, and some of the more reactive or highly volatile agents, are usually derivatised to facilitate chromatography, and to impart properties beneficial for detection. This review focuses on derivatisation reactions used in the chromatographic analysis of chemical warfare agents, their degradation products and metabolites.     

Analytical separation techniques for the determination of chemical warfare agents

Today, the determination of chemical warfare agents (CWAs) is an important area of application in analytical chemistry. Chromatographic, capillary electrophoretic and mass spectrometric techniques are primarily used for the identification and quantification of a broad field of classical CWAs in environmental samples and neutralization masses, obtained after destruction of CWAs. This overview is illustrative for the state of the art and mainly focuses on the literature published since 1996.     

Hollow fiber-mediated liquid-phase microextraction of chemical warfare agents from water

Unambiguous detection and identification of chemical warfare agents (CWAs) and related compounds are of paramount importance from verification point of view of Chemical Weapons Convention (CWC). It requires development of fast, reliable, simple and reproducible sample preparation of CWAs from water which is likely to be contaminated during deliberate or inadvertent spread of CWAs. This work describes development of hollow fiber liquid-phase microextraction (HF-LPME) method for efficient extraction of CWAs (such as sarin, sulfur mustard and their analogues) from water followed by gas chromatography-mass spectrometric analysis. Extraction parameters, such as organic solvent, agitation, extraction time, and salt concentration were optimized. Best recoveries of target analytes were achieved using 1 microL trichloroethylene as extracting solvent, 1000 rpm stirring rate, 15 min extraction time, and 30% NaCl. Excellent precision was observed with less than 7.6% RSD. The limit of detection by HF-LPME was achieved up to 0.1 microg/L at 30% salt concentration.     

Packed capillary liquid chromatography–electrospray mass spectrometry analysis of organophosphorus chemical warfare agents

Packed capillary column liquid chromatography (LC)–electrospray mass spectrometry (ESI-MS) was used for the first time to detect and identify four common organophosphorus chemical warfare agents in aqueous samples. Aqueous samples containing the organophosphorus chemical warfare agents in the 0.01 to 0.1 mg/ml range were analyzed directly by packed capillary LC–ESI-MS with the chemical warfare agents and several minor related impurities being well resolved under acetonitrile–water gradient elution conditions. The ESI-MS data for isopropyl methylphosphonofluoridate (sarin or GB), O-ethyl N,N-dimethylphosphoramidocyanidate (tabun or GA), cyclohexyl methylphosphonofluoridate (GF) and pinacolyl methylphosphonofluoridate (soman or GD) were acquired with a sampling cone voltage setting that promoted collisionally activated dissociation, and resulted in the acquisition of informative mass spectra containing both molecular and product ion information. The developed method appears to be an attractive alternative to GC–MS for the analysis of aqueous samples containing organophosphorus chemical warfare agents and their hydrolysis products, since they may be analyzed directly without the need for additional sample handling.     

Carbon nanotube/polythiophene chemiresistive sensors for chemical warfare agents

We report a chemiresistor that has been fabricated via simple spin-casting technique from stable CNT dispersion in hexafluoroisopropanol functionalized polythiophene. The sensor has shown high sensitivity and selectivity for a nerve reagent stimulant DMMP. A series of sensing studies, including field effect investigation, electrode passivation, and fluorescent measurement, indicate a combinative mechanism of charge transfer, introduction of scattering sites, and a configurational change of the polymer.     

Analysis of degradation products of chemical warfare agents using capillary electrophoresis

Analysis of chemical warfare agents (CWAs), their precursors and degradation products (DPs) is an important verification component in support of the Chemical Weapons Convention and urgently demanding rapid and reliable analytical methods. Considering a growing number of papers presented in the last years in the field of capillary electrophoresis (CE) of DPs, this review article gives an overview on CE techniques which are feasible for the determination of DPs with the advantages of using relatively simple and inexpensive research instrumentation, reduced consumption of potentially toxic samples, shorter sample preparation times, etc. A brief introduction is provided into the chemical background of CWAs followed by a documented appraisal that the CE method is well suited to deal with polar, acidic DPs mostly occurring in aqueous samples or extracts. Applications of CE to the separation of DPs are described, complemented by a critical discussion of the detection techniques, including mostly conductivity, laser-induced fluorescence, UV absorption and mass spectrometry. This review also includes actual development regarding the challenges of CE in analyses of different DPs from real samples, often avoided by in- and off-line pre-concentration techniques or the coupling of CE to selective detection methods. Special emphasis is placed on the miniaturised CE systems that have the potential of being before long developed into a field deployable and potentially disposable platform for routine DP monitoring in environmental samples.     

Anaerobic toxicity and biodegradability of hydrolysis products of chemical warfare agents

The toxicity and biodegradability of the main hydrolysis products of chemical warfare agents were investigated under methanogenic conditions. Among the tested substances, only MPhA does not have any toxic effect with regard to the aceticlastic methanogenic activity. The toxicity of other compounds varied between moderate (TDG, mercaptoethanol) to strong (ethanolamine, diisobutyl ester of MPhA). Biodegradability tests showed that all the products of chemical detoxification of mustard gas (ethanolamine, ethylene glycol, TDG, mercaptoethanol) can be biomineralized under methanogenic conditions. On the contrary, phosphorus-containing compounds from the chemical detoxification of nerve warfare agents (Sarin, Soman, V_x-gases) are quite persistent under these conditions.     

用于化学毒剂检测的微萃取技术研究进展

对化学毒剂及其降解产物的分析检测是准确鉴别化学沾染的重要手段.由于化学毒剂及其降解产物的样品可能存在于各种基质中,且部分化学毒剂在水体等基质中降解速度过快,所以将痕量样品从复杂基质中快速高效的富集提取出来显得尤其重要.微萃取技术具有装置体积小、使用少量或不使用溶剂、绿色环保、易与色谱分析技术联用等突出优势受到广泛的关注...     

Smart hydrogel sensor for detection of organophosphorus chemical warfare nerve agents

A novel “turn-off” fluorescence, smart hydrogel sensor for detection of a nerve agent simulant has been developed and tested. The smart hydrogel chemosensor has demonstrated an extremely fast and select fluorescence quenching detection response to the Sarin simulant diethylchlorophosphate (DCP) in the aqueous and vapor phases. The fluorogenic sensor utilizes 6,7-dihydroxycoumarin embedded in an polyacrylamide hydrogel matrix as the fluorescent sensing material. The rapid fluorescence quenching of the smart hydrogel films could easily be observed with the naked eye using a hand-held UV light at λ = 365 nm which demonstrates their practical application in real-time on-site monitoring.     

Mass spectrometric analysis of chemical warfare agents and their degradation products in soil and synthetic samples

A packed capillary liquid chromatography-electrospray ionization mass spectrometry (LC-ESI-MS) method was developed for the identification of chemical warfare agents, their degradation products and related compounds in synthetic tabun samples and in soil samples collected from a former mustard storage site. A number of organophosphorus and organosulfur compounds that had not been previously characterized were identified, based on acquired high-resolution ESI-MS data. At lower sampling cone voltages, the ESI mass spectra were dominated by protonated, sodiated and protonated acetonitrile adducts and/or their dimers that could be used to confirm the molecular mass of each compound. Structural information was obtained by inducing product ion formation in the ESI interface at higher sampling cone voltages. Representative ESI-MS mass spectra for previously uncharacterized compounds were incorporated into a database as part of an on-going effort in chemical warfare agent detection and identification. The same samples were also analyzed by capillary column gas chromatography (GC)-MS in order to compare an established method with LC-ESI-MS for chemical warfare agent identification. Analysis times and full-scanning sensitivities were similar for both methods, with differences being associated with sample matrix, ease of ionization and compound volatility. GC-MS would be preferred for organic extracts and must be used for the determination of mustard and relatively non-polar organosulfur degradation products, including 1,4- thioxane and 1,4-dithiane, as these compounds do not ionize during ESI-MS. Diols, formed following hydrolysis of mustard and longer-chain sulfur vesicants, may be analyzed using both methods with LC-ESI-MS providing improved chromatographic peak shape. Aqueous samples and extracts would, typically, be analyzed by LC-ESI-MS, since these analyses may be conducted directly without the need for additional sample handling and/or derivatization associated with GC-MS determinations. Organophosphorus compounds, including chemical warfare agents, related compounds and lower volatility hydrolysis products may all be determined during a single LC-ESI- MS analysis. Derivatization of chemical warfare agent hydrolysis products and other compounds with hydroxyl substitution would be required prior to GC-MS analysis, giving LC-ESI-MS a definite advantage over GC-MS for the analysis of samples containing chemical warfare agents and/or their hydrolysis products.     

Fluorescent detection of chemical warfare agents: functional group specific ratiometric chemosensors

Indicators providing highly sensitive and functional group specific fluorescent response to diisopropyl fluorophosphate (DFP, a nerve gas (G-agent) simulant) are reported. Nonemissive indicator 2 reacts with DFP to give a cyclized compound 2+A- that shows a high emission due to its highly planar and rigid structure. Very weak emission was observed by the addition of HCl. Another indicator based on pyridyl naphthalene exhibits a large shift in its emission spectrum after reaction with DFP, which provides for quantitative ratiometric detection.     

Catalytic methods for the destruction of chemical warfare agents under ambient conditions

This tutorial review--which should particularly appeal to chemists, biochemists, and molecular biologists interested in catalysis, redox processes, and enzymology--summarizes the recent progress toward developing catalysts capable of destroying one or more of the classical chemical warfare agents under ambient conditions. Specifically, we explore the reactions of sulfur mustard, the G-series of organophosphorus nerve agents including sarin and soman, and the organophosphorus nerve agent, VX. Catalysts range from metal-centered oxidation catalysts to engineered catalytic antibodies.     

Desorption electrospray ionisation mass spectrometric analysis of chemical warfare agents from solid‐phase microextraction fibers

Desorption electrospray ionisation mass spectrometry (DESI‐MS) was recently reported for the direct analysis of sample media without the need for additional sample handling. During the present study, direct analysis of solid‐phase microextraction (SPME) fibers by DESI‐MS/MS was evaluated with indoor office media that might be collected during a forensic investigation, including wall surfaces, office fabrics, paper products and Dacron swabs used for liquid sampling. Media spiked at the µg/g level with purified chemical warfare agents and a complex munitions grade sample of tabun, to simulate the quality of chemical warfare agent that might be used for terrorist purposes, were successfully analysed by DESI‐MS/MS. Sulfur mustard, a compound that has not been successfully analysed by electrospray mass spectrometry in the past, was also sampled using a SPME fiber and analysed for the first time by DESI‐MS/MS. Finally, the overall analytical approach involving SPME headspace sampling and DESI‐MS analysis was evaluated during a scenario‐based training live agent exercise. A sarin sample collected by the military was analysed and confirmed by DESI‐MS in a mobile laboratory under realistic field conditions. Copyright © 2007 Crown in the right of Canada. Published by John Wiley & Sons, Ltd.