Cationic and neutral diphenyldiazomethanerhodium(I) complexes as catalytically active species in the C-C coupling reaction of olefins and diphenyldiazomethane

Cationic rhodium(I) complexes cis-[Rh(acetone)2(L)(L')]+ (2: L = L'=C8H14; 3: L=C8H14; L'=PiPr3; 4: L=L'=PiPr3), prepared from [RhCl(C8H14)2]2] and isolated as PF6 salts, catalyze the C-C coupling reaction of diphenyldiazomethane with ethene, propene, and styrene. In most cases, a mixture of isomeric olefins and cyclopropanes were obtained which are formally built up by one equivalent of RCH=CH2 (R = H, Me, Ph) and one equivalent of CPh2. The efficiency and selectivity of the catalyst depends significantly on the coordination sphere around the rhodium(I) center. Treatment of 4 with Ph2CN2 in the molar ratio of 1:1 and 1:2 gave the complexes trans-[Rh(PiPr3)2(acetone)(eta1-N2CPh2)]PF6 (8) and trans-[Rh(PiPr3)2(eta1-N2CPh2)2]PF6 (9), of which 8 was characterized by X-ray crystallography. Since 8 and 9 not only react with ethene but also catalyze the reaction of C2H4 and free Ph2CN2, they can be regarded as intermediates (possibly resting states) in the C-C coupling process. The lability of 8 and 9 is illustrated by the reactions with pyridine and NaX (X=Cl, Br, I, N3) which afford the mono(diphenyldiazomethane)rhodium(I) compounds trans-[Rh(PiPr3)2(py)(eta1-N2CPh2)]PF6 (10) and trans-[RhX(eta1-N2CPh2)(PiPr3)2] (11-14), respectively. The catalytic activity of the neutral complexes 11 - 14 is somewhat less than that of the cationic species 8, 9 and decreases in the order Cl > Br> I > N3.     

Coordination chemistry of phosphanyl amino acids: solid state and solution structures of neutral and cationic rhodium complexes

Copper phosphide or arsenide complexes, [Cu(EPh(2))(neo)] (E = P, As, neo = 2,9-dimethyl-1,10-phenanthroline; trivial name: neocuprine) react selectively with the N-protected brominated serine derivatives, 2-(S)-(alkoxycarbonylamino)-3-bromomethylpropionates ((ROCO)SerBr, : R = PhCH(2), : tBu, : Me) to give the corresponding phosphanylated or arsanylated amino acids, (ROCO)SerPhos (: Phos = PPh(2)) and (Z)SerArs (Ars = AsPh(2), Z = PhCH(2)OCO). The dipeptide (Z)AlaSerPhos was likewise prepared. The phosphanes , and the arsane reacted cleanly with [Rh(2)(micro-Cl)(2)(cod)(2)] to give the rhodium(I) complexes [RhCl(cod)((Z)SerPhos)] , [RhCl(cod)((Boc)SerPhos)] (Boc = tBuOCO), [RhCl(cod)((Z)AlaSerPhos)] , and [RhCl(cod)((Z)SerArs)] which were characterized by X-ray diffraction studies. A common structural feature is an intramolecular (N)H[dot dot dot]Cl(Rh)-hydrogen bridge which according to NMR investigations remains intact in solution. The abstraction of chloride from the coordination sphere of Rh(I) in or has a profound structural impact. While in and , the ligands bind in a monodentate fashion, via the phosphorus atom only, they serve as bidentate ligands via the phosphorus centre and the peptidic C=O group in [Rh(cod)(kappa(2)-(Z)SerPhos)]PF(6) and [Rh(cod)(kappa(2)-(Z)AlaSerPhos)]PF(6). This causes also the amino acid residue structures to change from alpha-helix type in and to a beta-sheet type in both. Addition of chloride to and fully re-establishes the structures of both. The complexes [RhCl(cod)((Z)SerPhos)] and [RhCl(cod)((Boc)SerPhos)] show good activities in homogeneously catalyzed hydrogenations of olefins while the dipeptide complex is less active. Phosphane addition to greatly diminishes the catalytic activity. The cationic complex [Rh(cod)(kappa(2)-(Z)AlaSerPhos)]PF(6) shows low activity which, however, is greatly increased by addition of one equivalent of phosphane.     

Cyclometallated Pt(II) and Pd(II) complexes with a trithiacrown ligand

We report the synthesis and full characterization for a series of cyclometallated complexes of Pt(II) and Pd(II) incorporating the fluxional trithiacrown ligand 1,4,7-trithiacyclononane ([9]aneS3). Reaction of [M(C insertion mark N)(micro-Cl)]2 (M = Pt(II), Pd(II); C insertion mark N = 2-phenylpyridinate (ppy) or 7,8-benzoquinolinate (bzq)) with [9]aneS3 followed by metathesis with NH4PF6 yields [M(C insertion mark N)([9]aneS3)](PF6). The complexes [M(C insertion mark P)([9]aneS3)](PF6) (M = Pt(II), Pd(II); Cinsertion markP = [CH2C6H4P(o-tolyl)2-C,P]-) were synthesized from their respective [Pt(C insertion mark P)(micro-Cl)]2 or [Pd(C insertion mark P)(micro-O2CCH3)]2 (C insertion mark P) starting materials. All five new complexes have been fully characterized by multinuclear NMR, IR and UV-Vis spectroscopies in addition to elemental analysis, cyclic voltammetry, and single-crystal structural determinations. As expected, the coordinated [9]aneS3 ligand shows fluxional behavior in its NMR spectra, resulting in a single 13C NMR resonance despite the asymmetric coordination environment of the cyclometallating ligand. Electrochemical studies reveal irreversible one-electron metal-centered oxidations for all Pt(II) complexes, but unusual two-electron reversible oxidations for the Pd(II) complexes of ppy and bzq. The X-ray crystal structures of each complex indicate an axial M-S interaction formed by the endodentate conformation of the [9]aneS3 ligand. The structure of [Pd(bzq)([9]aneS3)](PF6) exhibits disorder in the [9]aneS3 conformation indicating a rare exodentate conformation as the major contributor in the solid-state structure. DFT calculations on [Pt([9]aneS3)(ppy)](PF6) and [Pd([9]aneS3)(ppy)](PF6) indicate the HOMO for both complexes is primarily dz2 in character with a significant contribution from the phenyl ring of the ppy ligand and p orbital of the axial sulfur donor. In contrast, the calculated LUMO is primarily ppy pi* in character for [Pt([9]aneS3)(ppy)](PF6), but dx2-y2 in character for [Pd([9]aneS3)(ppy)](PF6).     

Group 11 complexes with the bis(3,5-dimethylpyrazol-1-yl)methane ligand. How secondary bonds can influence the coordination environment of Ag(I): the role of coordinated water in [Ag2(mu-L)2(OH2)2](OTf)2

The complexation properties of the ligand bis(3,5-dimethylpyrazol-1-yl)methane (L) towards group 11 metals have been studied. The reaction in a 1 : 1 molar ratio with [Cu(NCMe)4]PF6 or Ag(OTf) complexes gives the mononuclear [CuL(NCMe)]PF6 (1), with crystallographic mirror symmetry, or dinuclear [Ag2(mu-L)2](OTf)2 (2) (OTf = trifluoromethanesulfonate) in which the ligand bridges both silver centres, an unprecedented mode of coordination for this type of ligands. Compound 2 crystallizes with two water molecules and forms a supramolecular structure through classical hydrogen bonding. The reaction in a 2 : 1 ratio affords in both cases the four-coordinated derivatives [ML2]X (M = Cu, X = PF6 (3); Ag, X = OTf 4). The treatment of [Ag(OTf)(PPh3)] with the ligand L gives [AgL(PPh3)]OTf (5). The gold(I) derivative [Au2(C6F5)2(mu-L)] (6) has also been obtained by reaction of L with two equivalents of [Au(C6F5)(tht)]. These complexes present a luminescent behaviour at low temperature; the emissions being mainly intraligand but enhanced after coordination of the metal. Compounds 1-4 have been characterized by X-ray crystallography. DFT studies showed that, in the silver complex 2, coordination of H2O to Ag in the binuclear complex is favoured by formation of a hydrogen-bonding network, involving the triflato anion, and releasing enough energy to allow distortion of the Ag2 framework.     

Metal-promoted aromatic ring amination and deamination reactions at a diazo ligand coordinated to rhodium and ruthenium

Reactions of MCl(3).3H(2)O (M = Rh and Ru) with the ligand 2-[(2-N-arylamino)phenylazo]pyridine [HL(1); NH(4)C(5)N=NC(6)H(4)N(H)C(6)H(4)(H) (HL(1a)), NH(4)C(5)N=NC(6)H(4)N(H)C(6)H(4)(CH(3)) (HL(1b)), and NH(4)C(5)N=NC(6)H(4)N(H)C(5)H(4)N (HL(1c))] in the presence of dilute NEt(3) afforded multiple products. In the case of rhodium, two green compounds, viz. [Rh(L(1))(2)](+) ([2](+)) and [RhCl(pap)(L(1))](+) ([3](+)), where L(1) and pap stand for the conjugate base of [HL(1)] and 2-(phenylazo)pyridine, respectively, were separated on a preparative thin layer chromatographic plate. The reaction of RuCl(3).3H(2)O, on the other hand, produced two brown compounds, viz. [RuCl(HL(1))(L(1))] (4) and [RuCl(pap)(L(1))] (5), respectively, as the major products. The X-ray structures of the representative complexes are reported. Except for complex 2, and 4, the products are formed due to the cleavage of an otherwise unreactive C(phenyl)-N(amino) bond. In complex 4, one of the tridentate ligands (HL(1)) does not use its maximum denticity and coordinates as a neutral bidentate donor. Plausible reasons for the differences in their modes of coordination of the ligands as in 2 and 4 have been discussed. The ligand pap in the cationic mixed ligand complex [3](+) reacts instantaneously with ArNH(2) to produce an ink-blue compound, [RhCl(HL(2))(L(1))](+) ([6](+)) in a high yield. The ligand HL(2) is formed due to regioselective fusion of ArNH(2) residue at the para carbon of the phenyl ring (with respect to the azo fragment) of pap in [3](+). The above complexes are generally intensely colored and show strong absorptions in the visible region, which are assigned to intraligand charge transfer transitions. These complexes undergo multiple and successive one-electron-transfer processes at the cathodic potentials. Electrogenerated cationic complexes of ruthenium(III), [4](+) and [5](+), showed rhombic EPR spectra at 77 K.     

Sterically hindered electron-withdrawing ligands: the reactions of N-carbazolyl phosphines with rhodium and palladium centres

The series of N-carbazolyl phosphines PPh(3-n)(NC(12)H(8))(n)(n= 1, L1; n= 2, L2; n= 3, L3) has been synthesised using BuLi to generate the N-carbazolyl lithium salt, followed by reaction with the appropriate chlorophosphine. The reactions between [Rh(mu-Cl)(CO)(2)](2) and four equivalents of L1 or L2 gave [RhCl(CO)(L1)(2)] 1 and [RhCl(CO)(L2)(2)] 2, though attempts to synthesise the analogous complex using L3 resulted in the formation of [Rh(mu-Cl)(CO)(L3)](2) 3 instead. The inability of L3 to cleave the chloride bridges can be related to its considerable steric requirements. The electronic properties of L1-3 were assessed by comparison of the nu(CO) values of the [Rh(acac)(CO)(L1-3)] complexes 4-6. The increase in number of N-carbazolyl substituents at the phosphorus atom results in a decrease of the sigma-donor and increase in the pi-acceptor character in the order L1 < L2 < L3. In the reactions of L1-3 with [PdCl(2)(cod)] only L1 was able to displace cod from the metal centre and form [PdCl(2)(L1)(2)] 7. The use of [PdCl(2)(NCMe)(2)] instead of [PdCl(2)(cod)] resulted in the formation of the complexes [PdCl(2)(L1)(2)] 7 from L1, the cyclometallated complex [Pd(mu-Cl)[P(NC(12)H(8))(2)(NC(12)H(7))-kappa(2)P,C]](2) 8 from L3 , and a mixture of [PdCl(2)(L2)(2)] 9 and [Pd(mu-Cl)[PPh(NC(12)H(8))(NC(12)H(7))-kappa(2)P,C]](2) 10 from L2 . The reaction of L3 with [Pd(OAc)(2)] produced the cyclometallated complex [Pd(mu-O(2)CCH(3))[P(NC(12)H(8))(2)(NC(12)H(7))-kappa(2)P,C]](2) 11. The reaction of L3 with [Pd(2)(dba)(3)].CHCl(3) produced the 14-electron complex [Pd(L3)(2)] 12. The X-ray crystal structures of six complexes are reported, all of which show the presence of C-H...Pd hydrogen bonding.     

Preparation and characterization of dinuclear Pd(II) complexes of binucleating tetraaza-thiophenolate ligands

The thioethers 4-tert-butyl-2,6-bis((2-(dimethylamino)ethylimino)methyl)phenyl(tert-butyl)sulfane (tBu-L3) and 4-tert-butyl-2,6-bis((2-(dimethylamino)ethylimino)methyl)phenyl(tert-butyl)sulfane (tBu-L4) react with PdCl2(NCMe)2 to give the dinuclear palladium thiophenolate complexes [(L3)Pd2Cl2]+ (2) and [(L4Pd2(mu-Cl)]2+ (3) (HL3= 2,6-bis((2-(dimethylamino)ethylimino)methyl)-4-tert-butylbenzenethiol, HL4 = 2,6-bis((2-(dimethylamino)ethylamino)methyl)-4-tert-butylbenzenethiol). The chloride ligands in could be replaced by neutral (NCMe) and anionic ligands (NCS-, N3-, CN-, OAc-) to give the diamagnetic Pd(II) complexes [(L3)Pd2(NCMe)2]3+ (4), [(L3)Pd2(NCS)2]+ (5), [(L3)Pd2(N3)2]+ (6), [{(L3)Pd2(mu-CN)}2]4+ (7) and [(L3)Pd2(OAc)]2+ (9). The nitrile ligands in and in [(L3)Pd2(NCCH2Cl)2]3+ are readily hydrated to give the corresponding amidato complexes [(L3)Pd2(CH3CONH)]2+ (8) and [(L3)Pd2(CH2ClCONH)]2+ (10). The reaction of [(L3)Pd2(NCMe)2]3+ with NaBPh4 gave the diphenyl complex [(L3)Pd2(Ph)2]+ (11). All complexes were either isolated as perchlorate or tetraphenylborate salts and studied by IR, 1H and 13C NMR spectroscopy. In addition, complexes 2[ClO4], 3[ClO4]2, 5[BPh4], 6[BPh4], 7[ClO4]4, 9[ClO4]2, 10[ClO4]2 and 11[BPh4] have been characterized by X-ray crystallography.     

Syntheses and molecular structure of some Rh and Ru complexes with the chelating diphenyl (2-pyridyl)phosphine ligand

The rhodium(III) complex mer,cis-[RhCl3(PPh2py-P,N)(PPh2py-P)] (1) (PPh2py = diphenyl (2-pyridyl)phosphine) has been prepared from RhCl3 x 3H2O and PPh2py and converted to the trans,cis-[RhCl2(PPh2py-P,N)2]PF6 (2) in acetone solution by treatment with Ag+ and PF6(-). Ruthenium(III) and ruthenium(II) compounds with PPh2py, mer,cis-[RuCl3(PPh2py-P,N)(PPh2py-P)] (3) and mer-[RuCl(PPh2py-P,N)2(PPh2py-P)]Cl (5) have been obtained from DMSO precursor complexes. In a chloroform solution, complex (5) isomerizes to fac-[RuCl(PPh2py-P,N)2(PPh2py-P)]Cl (fac-5). All compounds have been characterized by MS, UV-vis, IR, and 1H and 31P{1H} NMR spectroscopy, and the Ru(III) compound has been characterized by EPR spectroscopy as well. The crystal structures of 1, 2, 3, and fac-5 have been determined. In all compounds under investigation, at least one pyridylphosphine acts as a chelate ligand. The 31P chemical shifts for chelating PPh2py-P,N depend on the Ru-P bond lengths.     

Coordination chemistry of dinucleating P2N2S ligands: preparation and characterization of cationic palladium complexes

The thioethers (4-tert-butyl-2,6-bis((2-(diphenylphosphino)ethylimino)methyl)phenyl)(tert-butyl)sulfane (tBuL3) and (4-tert-butyl-2,6-bis((2-(diphenylphosphino)ethylamino)methyl)phenyl)(tert-butyl)sulfane (tBuL4) react readily with [Pd(NCMe)2Cl2] to give the dinuclear palladium thiophenolate complexes [(L3)Pd2(Cl)2]+ and [(L4)Pd2(micro-Cl)]2+ (HL3=2,6-bis((2-(diphenylphosphino)ethylimino)methyl)-4-tert-butylbenzenethiol, HL4=2,6-bis((2-(diphenylphosphino)ethylamino)methyl)-4-tert-butylbenzenethiol). The chlorides in could be replaced by neutral (MeCN) and anionic ligands (NCS-, N3-, I-, CN-) to give the dinuclear PdII complexes [(L3)Pd2(NCMe)2]3+, [(L3)Pd2(SCN)2]+, [(L3)Pd2(N3)2]+, [(L3)Pd2(I)2]+, and [(L3)Pd2(CN)2]+. The acetonitrile ligands in are readily hydrated to give the corresponding amidato complex [(L3)Pd2(NHCOMe)]2+. All complexes were isolated as perchlorate salts and studied by infrared, 1H, and 31P NMR spectroscopy. In addition, complexes [ClO4].EtOH, [ClO4]2, [ClO4], [ClO4].EtOH, and [ClO4]2.MeCN.MeOH have been characterized by X-ray crystallography. The dipalladium complex was found to catalyse the vinyl-addition polymerization of norbornene in the presence of MAO (methylalumoxane) and B(C6F5)3/AlEt3.     

Oxidative double dehalogenation of tetrachlorocatechol by a bio-inspired CuII complex: formation of chloranilic acid

Copper(II) complexes of the potentially tripodal N,N,O ligand 3,3-bis(1-methylimidazol-2-yl)propionate (L1) and its conjugate acid HL1 have been synthesised and structurally and spectroscopically characterised. The reaction of equimolar amounts of ligand and CuII resulted in the complexes [Cu(L1)]n(X)n (X=OTf-, PF6(-); n=1,2), for which a new bridging coordination mode of L1 is inferred. Although these complexes showed moderate catecholase activity in the oxidation of 3,5-di-tert-butylcatechol, surprising reactivity with the pseudo-substrate tetrachlorocatechol was observed. A chloranilato-bridged dinuclear CuII complex was isolated from the reaction of [Cu(L1)]n(PF6)n with tetrachlorocatechol. This stoichiometric oxidative double dehalogenation of tetrachlorocatechol to chloranilic acid by a biomimetic copper(II) complex is unprecedented. The crystal structure of the product, [Cu2(ca)Cl2(HL1)2], shows a bridging bis-bidentate chloranilato (ca) ligand and ligand L1 coordinated as its conjugate acid (HL1) in a tridentate fashion. Magnetic susceptibility studies revealed weak antiferromagnetic coupling (J= -35 cm(-1)) between the two copper centres in the dinuclear complex. Dissolution of the green complex [Cu2(ca)Cl2(HL1)2] resulted in the formation of new pink-purple mononuclear compound [Cu(ca)(HL1)(H2O)], the crystal structure of which was determined. It showed a terminal bidentate chloranilato ligand and N,N-bidentate coordination of ligand HL1, which illustrates the flexible coordination chemistry of ligand L1.     

Synthesis of nitrosylruthenium complexes containing 2,2':6',2"-terpyridine by reactions of alkoxo complexes with acids

Nitrosylruthenium complexes containing 2,2':6',2"-terpyridine (terpy) have been synthesized and characterized. The three alkoxo complexes trans-(NO, OCH3), cis-(Cl, OCH3)-[RuCl(OCH3)(NO)(terpy)]PF6 ([2]PF6), trans-(NO, OC2H5), cis-(Cl, OC2H5)-[RuCl(OC2H5)(NO)(terpy)]PF6 ([3]PF6), and [RuCl(OC3H7)(NO)(terpy)]PF6 ([4]PF6) were synthesized by reactions of trans-(Cl, Cl), cis-(NO, Cl)-[RuCl2(NO)(terpy)]PF6 ([1]PF6) with NaOCH3 in CH3OH, C2H5OH, and C3H7OH, respectively. Reactions of [3]PF6 with an acid such as hydrochloric acid and trifluoromethansulforic acid afford nitrosyl complexes in which the alkoxo ligand is substituted. The geometrical isomer of [1]PF6, trans-(NO, Cl), cis-(Cl, Cl)-[RuCl2(NO)(terpy)]PF6 ([5]PF6), was obtained by the reaction of [3]PF6 in a hydrochloric acid solution. Reaction of [3]PF6 with trifluoromethansulforic acid in CH3CN gave trans-(NO, Cl), cis-(CH3CN, Cl)-[RuCl(CH3CN)(NO)(terpy)]2+ ([6]2+) under refluxing conditions. The structures of [3]PF6, [4]PF6.CH3CN, [5]CF3SO3, and [6](PF6)2 were determined by X-ray crystallograpy.     

Structural and electronic differences of copper(I) complexes with tris(pyrazolyl)methane and hydrotris(pyrazolyl)borate ligands

Copper(I) complexes with tripodal nitrogen-containing neutral ligands such as tris(3,5-diisopropyl-1-pyrazolyl)methane (L1') and tris(3-tertiary-butyl-5-isopropyl-1-pyrazolyl)methane (L3'), and with corresponding anionic ligands such as hydrotris(3,5-diisopropyl-1-pyrazolyl)borate (L1-) and hydrotris(3-tertiary-butyl-5-isopropyl-1-pyrazolyl)borate (L3-) were synthesized and structurally characterized. Copper(I) complexes [Cu(L1')Cl] (1), [Cu(L1')(OClO3)] (2), [Cu(L1')(NCMe)](PF6) (3a), [Cu(L1')(NCMe)](ClO4) (3b), [Cu(L1')(CO)](PF6) (4a), and [Cu(L1')(CO)](ClO4) (4b) were prepared using the ligand L1'. Copper(I) complexes [Cu(L3')Cl] (5) and [Cu(L3')(NCMe)](PF6) (6) with the ligand L3' were also synthesized. Copper(I) complexes [Cu(L1)(NCMe)] (7) and [Cu(L1)(CO)] (8) were prepared using the anionic ligand L1-. Finally, copper(I) complexes with anionic ligand L3- and acetonitrile (9) and carbon monoxide (10) were synthesized. The complexes obtained were fully characterized by IR, far-IR, 1H NMR, and 13C NMR spectroscopy. The structures of both ligands, L1' and L3', and of complexes 1, 2, 3a, 3b, 4a, 4b, 5, 6, 7, and 10 were determined by X-ray crystallography. The effects of the differences in (a) the fourth ligand and the counteranion, (b) the steric hindrance at the third position of the pyrazolyl rings, and most importantly, (c) the charge of the N3 type ligands, on the structures, spectroscopic properties, and reactivities of the copper(I) complexes are discussed. The observed differences in the reactivities toward O2 of the copper(I) acetonitrile complexes are traced back to differences in the oxidation potentials determined by cyclic voltammetry. A special focus is set on the carbonyl complexes, where the 13C NMR and vibrational data are presented. Density functional theory (DFT) calculations are used to shed light on the differences in CO bonding in the compounds with neutral and anionic N3 ligands. In correlation with the vibrational and electrochemical data of these complexes, it is demonstrated that the C-O stretching vibration is a sensitive probe for the "electron richness" of copper(I) in these compounds.     

Dimethylsulfoxide as a ligand for RhI and IrI complexes--isolation, structure, and reactivity towards X-H bonds (X=H, OH, OCH3)

Novel neutral and cationic Rh(I) and Ir(I) complexes that contain only DMSO molecules as dative ligands with S-, O-, and bridging S,O-binding modes were isolated and characterized. The neutral derivatives [RhCl(DMSO)(3)] (1) and [IrCl(DMSO)(3)] (2) were synthesized from the dimeric precursors [M(2)Cl(2)(coe)(4)] (M=Rh, Ir; COE=cyclooctene). The dimeric Ir(I) compound [Ir(2)Cl(2)(DMSO)(4)] (3) was obtained from 2. The first example of a square-planar complex with a bidentate S,O-bridging DMSO ligand, [(coe)(DMSO)Rh(micro-Cl)(micro-DMSO)RhCl(DMSO)] (4), was obtained by treating [Rh(2)Cl(2)(coe)(4)] with three equivalents of DMSO. The mixed DMSO-olefin complex [IrCl(cod)(DMSO)] (5, COD=cyclooctadiene) was generated from [Ir(2)Cl(2)(cod)(2)]. Substitution reactions of these neutral systems afforded the complexes [RhCl(py)(DMSO)(2)] (6), [IrCl(py)(DMSO)(2)] (7), [IrCl(iPr(3)P)(DMSO)(2)] (8), [RhCl(dmbpy)(DMSO)] (9, dmbpy=4,4'-dimethyl-2,2'-bipyridine), and [IrCl(dmbpy)(DMSO)] (10). The cationic O-bound complex [Rh(cod)(DMSO)(2)]BF(4) (11) was synthesized from [Rh(cod)(2)]BF(4). Treatment of the cationic complexes [M(coe)(2)(O=CMe(2))(2)]PF(6) (M=Rh, Ir) with DMSO gave the mixed S- and O-bound DMSO complexes [M(DMSO)(2)(DMSO)(2)]PF(6) (Rh=12; Ir=in situ characterization). Substitution of the O-bound DMSO ligands with dmbpy or pyridine resulted in the isolation of [Rh(dmbpy)(DMSO)(2)]PF(6) (13) and [Ir(py)(2)(DMSO)(2)]PF(6) (14). Oxidative addition of hydrogen to [IrCl(DMSO)(3)] (2) gave the kinetic product fac-[Ir(H)(2)Cl(DMSO)(3)] (15) which was then easily converted to the more thermodynamically stable product mer-[Ir(H)(2)Cl(DMSO)(3)] (16). Oxidative addition of water to both neutral and cationic Ir(I) DMSO complexes gave the corresponding hydrido-hydroxo addition products syn-[(DMSO)(2)HIr(micro-OH)(2)(micro-Cl)IrH(DMSO)(2)][IrCl(2)(DMSO)(2)] (17) and anti-[(DMSO)(2)(DMSO)HIr(micro-OH)(2)IrH(DMSO)(2)(DMSO)][PF(6)](2) (18). The cationic [Ir(DMSO)(2)(DMSO)(2)]PF(6) complex (formed in situ from [Ir(coe)(2)(O=CMe(2))(2)]PF(6)) also reacts with methanol to give the hydrido-alkoxo complex syn-[(DMSO)(2)HIr(micro-OCH(3))(3)IrH(DMSO)(2)]PF(6) (19). Complexes 1, 2, 4, 5, 11, 12, 14, 17, 18, and 19 were characterized by crystallography.     

Reactions of 2-(arylazo) aniline with RhCl3: synthesis and structure of new cyclometalated complexes of Rh(III) and recognition of RhCl3 assisted azo (-N=N-) cleavage

The reactions of 2-(arylazo) anilines, HL (1) [where HL is 2-(ArN=N)C6H4NH2; Ar is C6H5 (for HL1, 1a) and p-MeC6H4 (for HL2, 1b); H of HL represents the proton of Ar which gets dissociated upon orthometalation] with RhCl3 in methanol afforded new orthometalated complexes of composition (L)(HL)Rh(III)Cl2 (2) and (L)(ArNH2)Rh(III)Cl2 (3). The anionic L- binds the metal in tridentate (C, N, N) manner in both the complexes, while HL and ArNH2 bind the metal of 2 and 3 in monodentate fashion through the amino nitrogen. The ArNH2 of 3 was formed in situ due to cleavage of azo (-N=N-) function of monodentate HL of 2. The scission of N=N has been authenticated.     

Palladium(II) and platinum(II) organometallic complexes with 4,7-dihydro-5-methyl-7-oxo[1,2,4]triazolo[1,5-a]pyrimidine. Antitumor activity of the platinum compounds

Palladium and platinum complexes with HmtpO (where HmtpO=4,7-dihydro-5-methyl-7-oxo[1,2,4]triazolo[1,5-a]pyrimidine, an analogue of the natural occurring nucleobase hypoxanthine) of the types [M(dmba)(PPh3)(HmtpO)]ClO4[dmba=N,C-chelating 2-(dimethylaminomethyl)phenyl; M=Pd or Pt], [Pd(N-N)(C6F5)(HmtpO)]ClO4[N-N=2,2'-bipyridine (bpy), 4,4'-dimethyl-2,2'-bipyridine (Me2bpy), or N, N, N', N'-tetramethylethylenediamine (tmeda)] and cis-[M(C6F5)2(HmtpO)2] (M=Pd or Pt) (head-to-head atropisomer in the solid state) have been obtained. Pd(II) and Pt(II) complexes with the anion of HmtpO of the types [Pd(tmeda)(C6F5)(mtpO)], [Pd(dmba)(micro-mtpO)] 2, and [NBu4]2[M(C6F5)2(micro-mtpO)]2(M=Pd or Pt) have been prepared starting from the corresponding hydroxometal complexes. Complexes containing simultaneously both the neutral HmtpO ligand and the anionic mtpO of the type [NBu4][M(C6F5)2(HmtpO)(mtpO)] (M=Pd or Pt) have been also obtained. In these mtpO-HmtpO metal complexes, for the first time, prototropic exchange is observed between the two heterocyclic ligands. The crystal structures of [Pd(dmba)(PPh 3)(HmtpO)]+, cis-[Pt(C6F5)2(HmtpO)2].acetone, [Pd(C6F5)(tmeda)(mtpO)].2H2O, [Pd(dmba)(micro-mtpO)]2, [NBu4]2[Pd(C6F5)2(micro-mtpO)]2.CH2Cl2.toluene, [NBu4]2[Pt(C6F5)2(micro-mtpO)](2).0.5(toluene), and [NBu4][Pt(C6F5)2(mtpO)(HmtpO)] have been established by X-ray diffraction. Values of IC50 were calculated for the new platinum complexes cis-[Pt(C6F5)2(HmtpO)2] and [Pt(dmba)(PPh3)(HmtpO)]ClO4 against a panel of human tumor cell lines representative of ovarian (A2780 and A2780 cisR), lung (NCI-H460), and breast cancers (T47D). At 48 h incubation time, both complexes were about 8-fold more active than cisplatin in T47D and show very low resistance factors against an A2780 cell line, which has acquired resistance to cisplatin. The DNA adduct formation of cis-[Pt(C6F5)2(HmtpO)2] and [Pt(dmba)(PPh3)(HmtpO)]ClO4 was followed by circular dichroism and electrophoretic mobility. Atomic force microscopy images of the modifications caused by these platinum complexes on plasmid DNA pB R322 were also obtained.     

Providing support in favor of the existence of a Pd(II)/Pd(IV) catalytic cycle in a Heck-type reaction

The complex [Pd(O,N,C-L)(OAc)], in which L is a monoanionic pincer ligand derived from 2,6-diacetylpyridine, reacts with 2-iodobenzoic acid at room temperature to afford the very stable pair of Pd(IV) complexes (OC-6-54)- and (OC-6-26)-[Pd(O,N,C-L)(O,C-C(6)H(4)CO(2)-2)I] (1.5:1 molar ratio, at -55?°C). These complexes and the Pd(II) species [Pd(O,N,C-L)(OX)] and [Pd(O,N,C-L')(NCMe)]ClO(4), (X = MeC(O) or ClO(3), L' = another monoanionic pincer ligand derived from 2,6-diacetylpyridine), are precatalysts for the arylation of CH(2)=CHR (R = CO(2)Me, CO(2)Et, Ph) using IC(6)H(4)CO(2)H-2 and AgClO(4). These catalytic reactions have been studied and a tentative mechanism is proposed. The presence of two Pd(IV) complexes was detected by ESI(+)-MS during the catalytic process. All the data obtained strongly support a Pd(II)/Pd(IV) catalytic cycle.     

Unprecedented coordination of dithiocarbimate in multinuclear and heteroleptic complexes

An uncommon coordination protocol induced by the p-tolylsulfonyl dithiocarbimate ligand (L) [L = p-CH(3)C(6)H(4)SO(2)N[double bond, length as m-dash]CS(2)(2-)] in conjunction with PPh(3) allowed the formation of novel homodimetallic, Cu(2)(PPh(3))(4)L (1), trinuclear heterometallic Cu(2)Ni(L)(2)(PPh(3))(4) (2) and heteroleptic complexes of general formula cis-[M(PPh(3))(2)L] [M = Pd(ii) (3), Pt(ii) (4)]. The complexes have been characterized by microanalysis, mass spectrometry, IR, (1)H, (13)C and (31)P NMR and electronic absorption spectra and single-crystal X-ray crystallography. 2 uniquely consists of square planar, trigonal planar and tetrahedral coordination spheres within the same molecule. In both heteroleptic complexes 3 and 4 the orientation of aromatic protons of PPh(3) ligand towards the Pd(ii) and Pt(ii) center reveals C-HPd and C-HPt rare intramolecular anagostic or preagostic interactions. These complexes exhibit photoluminescent properties in solution at room temperature arising mainly from intraligand charge transfer (ILCT) transitions. The assignment of electronic absorption bands has been corroborated by time dependent density functional theory (TD-DFT) calculations. Complexes 1 and 2 with σ(rt) values ～ 10(-6) S cm(-1) show semi-conductor properties in the temperature range 313-403 K whereas 3 and 4 exhibit insulating behaviour.     

The bridging function of an apparently nonbridging ligand: dinuclear rhodium complexes with Rh(mu-SbR3)Rh as a molecular unit

Novel dinuclear rhodium complexes of the general composition [Rh2Cl2(mu-CRR')2(mu-SbiPr3)] (4-6) were prepared by thermolysis of the mononuclear precursors trans-[RhCl(=CRR')(SbiPr3)2] in excellent yield. The X-ray crystal structure analysis of 4 (R = R' = Ph) confirms the symmetrical bridging position of the stibane ligand. Related compounds [Rh2Cl2(mu-CPh2)(mu-CRR')(mu-SbiPr3)] (7, 8) with two different carbene units were obtained either from trans-[RhCl(=CPh2)(SbiPr3)2] (1) and RR'CN2 or by a conproportionation of 4 and 5 (R = R' = p-Tol) or 4 and 6 (R= Ph, R' = p-Tol), respectively. While CO reacts with 4 to give the polymeric product [[RhCl(CPh2)(CO)]n] (9), tert-butyl isocyanide replaces the bridging stibane and yields [Rh2Cl2(mu-CPh2)2(mu-CNtBu)] (10). The reaction of 4 with tertiary phosphanes PR3 leads to complete bridge cleavage and affords the mononuclear compounds trans-[RhCl(=CPh2)(PR3)2] (11-15). In contrast, treatment of 4 with SbMe3 and SbEt3 yields the related triply bridged complexes [Rh2Cl2(mu-CPh2)2(mu-SbR3)] (16, 17) by substitution of SbiPr3 for the smaller stibanes. The displacement of the chloro ligands in 4-6 and 10 by n5-cyclopentadienyl gives the dinuclear complexes [(n5-C5H5)2Rh2(mu-CRR')2] (18-20) and [(n5-C5H5)2Rh2(mu-CPh2)2(mu-CNtBu)] (21), of which 18 (R = R' = Ph) was characterized crystallographically.     

Rhodium(I) and rhodium(III) complexes formed by coordination and C-H activation of bulky functionalized phosphanes

The reaction of [[RhCl(C(8)H(14))(2)](2)] (2) with iPr(2)PCH(2)CH(2)C(6)H(5) (L(1)) led, via the isolated dimer [[RhCl(C(8)H(14))(L(1))](2)] (3), to a mixture of three products 4 a-c, of which the dinuclear complex [[RhCl(L(1))(2)](2)] (4 a) was characterized by Xray crystallography. The mixture of 4a-c reacts with CO, ethene, and phenylacetylene to give the square-planar compounds trans-[RhCl(L)(L(1))(2)] (L=CO (5), C(2)H(4) (6), C=CHPh (9)). The corresponding allenylidene(chloro) complex trans-[RhCl(=C=C=CPh(2))(L(1))(2)] (11), obtained from 4 a-c and HC triple bond CC(OH)Ph(2) via trans-[RhCl[=C=CHC(OH)Ph(2)](L(1))(2)] (10), could be converted stepwise to the related hydroxo, cationic aqua, and cationic acetone derivatives 12-14, respectively. Treatment of 2 and [[RhCl(C(2)H(4))(2)](2)] (7) with two equivalents of tBu(2)PCH(2)CH(2)C(6)H(5) (L(2)) gave the dimers [[RhCl(C(8)H(14))(L(2))](2)] (15) and [[RhCl(C(2)H(4))(L(2))](2)] (16), which both react with L(2) in the molar ratio of 1:2 to afford the five-coordinate aryl(hydrido)rhodium(III) complex [RhHCl(C(6)H(4)CH(2)CH(2)PtBu(2)-kappa(2)C,P)(L(2))] (17) by C-H activation. The course of the reactions of 17 with CO, H(2), PhC triple bond CH, HCl, and AgPF(6), leading to the compounds 19-21, 24, and 25 a, respectively, indicate that the coordinatively unsaturated isomer of 17 with the supposed composition [RhCl(L(2))(2)] is the reactive species. Labeling experiments using D(2), DCl, and PhC triple bond CD support this proposal. With either [Rh(C(8)H(14))(eta(6)-L(2)-kappaP]PF(6) or [Rh(C(2)H(4))(eta(6)-L(n)-kappaP]PF(6) (n=1 and 2) as the starting materials, the corresponding halfsandwich-type complexes 27, 28, and 32 were obtained. The nonchelating counterpart of the dihydrido compound 32 with the composition [RhH(2)(PiPr(3))(eta(6)-C(6)H(6))]PF(6) (35) was prepared stepwise from [Rh(C(2)H(4))(PiPr(3))(eta(6)-C(6)H(6))]PF(6) and H(2) in acetone via the tris(solvato) species [RhH(2)(PiPr(3))(acetone)(3)]PF(6) (34) as intermediate. The synthesis of the bis(chelate) complex [Rh(eta(4)-C(8)H(12))(C(6)H(5)OCH(2)CH(2)PtBu(2)-kappa(2)O,P)]BF(4) (39) is also described. Besides 4 a, the compounds 17, 25 a, and 39 have been characterized by Xray crystal structure analysis.     

N,N,N ',N '-Tetrakis(2-pyridylmethyl)ethylenediamine and its analogues as hypodentate ligands. Synthesis and characterization of the rhodium(III), ruthenium(II), and palladium(II) complexes

New complexes of Rh(III), Ru(II), and Pd(II) with N,N,N',N'-tetrakis(2-pyridylmethyl)ethylenediamine (tpen) and its analogues have been prepared. The reaction of RhCl(3).nH(2)O with tpen is slow and allows one to isolate the products of three consecutive substitution steps: Rh(2)Cl(6)(tpen) (1), cis-[RhCl(2)(eta(4)-tpen)](+) (2), and [RhCl(eta(5)-tpen)](2+) (3). In acetonitrile the reaction stops at the step of the formation of cis-[RhCl(2)(eta(4)-tpen)](+), whereas [RhCl(eta(5)-tpen)](2+) is the final product of the further reaction in ethanol. Fully chelated [Rh(tpen)](3+) could not be obtained. Bis(acetylacetonato)palladium(II), Pd(acac)(2), reacts with tpen and its analogues, N,N,N',N'-tetrakis(2-pyridylmethyl)-1,3-propanediamine (tptn) and N,N,N',N'-tetrakis(2-pyridylmethyl)-(R)-1,2-propylenediamine (R-tppn), to give [Pd(eta(4)-tpen)](2+) (4), [Pd(eta(4)-tppn)](2+) (5), and [Pd(eta(4)-tptn)](2+) (6), respectively. Two pyridyl arms remain uncoordinated in these cases. The formation of unstable Pd(III) complexes from these Pd(II) complexes in solution was suggested on the basis of electrochemical measurements. Ruthenium(III) trichloride, RuCl(3).nH(2)O, is reduced to give a Ru(II) complex with fully coordinated tpen, [Ru(tpen)](2+) (7). The same product was obtained in a more straightforward reaction of Ru(II)Cl(2)(dimethyl sulfoxide)(4) with tpen. Electrochemical studies showed a quasi-reversible [Ru(tpen)](2+/3+) couple for [7](ClO(4))(2) (E(1/2) = 1.05 V vs Ag/AgCl). Crystal structures of [2](PF(6)).2CH(3)CN, [3](PF(6))(2).CH(3)CN, [6](ClO(4))(2), and [7](ClO(4))(2).0.5H(2)O were determined. Crystal data: [2](PF(6)).2CH(3)CN, monoclinic, C2, a = 16.974(4) A, b = 8.064(3) A, c = 13.247(3) A, beta = 106.37(2) degrees, V = 1739.9(8) A(3), Z = 2; [3](PF(6))(2).CH(3)CN, triclinic, P1, a = 11.430(1) A, b = 19.234(3) A, c = 8.101(1) A, alpha = 99.43(1) degrees, beta = 93.89(1) degrees, gamma = 80.10(1) degrees, V = 1729.3(4) A(3), Z = 2; [6](ClO(4))(2), orthorhombic, Pnna, a = 8.147(1) A, b = 25.57(1) A, c = 14.770(4) A, V = 3076(3) A(3), Z = 4; [7](ClO(4))(2).0.5H(2)O, monoclinic, P2(1)/c, a = 10.046(7) A, b = 19.049(2) A, c = 15.696(3) A, beta = 101.46(3) degrees, V = 2943(2) A(3), Z = 4.