The use of imidazolium ionic liquids for the formation and stabilization of ir0 and rh0 nanoparticles: efficient catalysts for the hydrogenation of arenes

Stable transition-metal nanoparticles of the type [M(0)](n) are easily accessible through the reduction of Ir(I) or Rh(III) compounds dissolved in "dry" 1-n-butyl-3-methylimidazolium hexafluorophosphate ionic liquid by molecular hydrogen. The formation of these [M(0)](n) nanoparticles is straightforward; they are prepared in dry ionic liquid whereas the presence of the water causes the partial decomposition of ionic liquid with the formation of phosphates, HF and transition-metal fluorides. Transmission electron microscopy (TEM) observations and X-ray diffraction analysis (XRD) show the formation of [Ir(0)](n) and [Rh(0)](n) nanoparticles with 2.0-2.5 nm in diameter. The isolated [M(0)](n) nanoparticles can be redispersed in the ionic liquid, in acetone or used in solventless conditions for the liquid-liquid biphasic, homogeneous or heterogeneous hydrogenation of arenes under mild reaction conditions (75 degrees C and 4 atm). The recovered iridium nanoparticles can be reused several times without any significant loss in catalytic activity. Unprecedented total turnover numbers (TTO) of 3509 in 32 h, for arene hydrogenation by nanoparticles catalysts, have been achieved in the reduction of benzene by the [Ir(0)](n) in solventless conditions. Contrarily, the recovered Rh(0) nanoparticles show significant agglomeration into large particles with a loss of catalytic activity. The hydrogenation of arenes containing functional groups, such as anisole, by the [Ir(0)](n) nanoparticles occurs with concomitant hydrogenolysis of the C-O bond, suggesting that these nanoparticles behave as "heterogeneous catalysts" rather than "homogeneous catalysts".     

The partial hydrogenation of benzene to cyclohexene by nanoscale ruthenium catalysts in imidazolium ionic liquids

The controlled decomposition of an Ru(0) organometallic precursor dispersed in 1-n-butyl-3-methylimidazolium hexafluorophosphate (BMI.PF(6)), tetrafluoroborate (BMI.BF(4)) or trifluoromethane sulfonate (BMI.CF(3)SO(3)) ionic liquids with H(2) represents a simple and efficient method for the generation of Ru(0) nanoparticles. TEM analysis of these nanoparticles shows the formation of superstructures with diameters of approximately 57 nm that contain dispersed Ru(0) nanoparticles with diameters of 2.6+/-0.4 nm. These nanoparticles dispersed in the ionic liquids are efficient multiphase catalysts for the hydrogenation of alkenes and benzene under mild reaction conditions (4 atm, 75 degrees C). The ternary diagram (benzene/cyclohexene/BMI.PF(6)) indicated a maximum of 1 % cyclohexene concentration in BMI.PF(6), which is attained with 4 % benzene in the ionic phase. This solubility difference in the ionic liquid can be used for the extraction of cyclohexene during benzene hydrogenation by Ru catalysts suspended in BMI.PF(6). Selectivities of up to 39 % in cyclohexene can be attained at very low benzene conversion. Although the maximum yield of 2 % in cyclohexene is too low for technical applications, it represents a rare example of partial hydrogenation of benzene by soluble transition-metal nanoparticles.     

Supramolecular shuttle and protective agent: a multiple role of methylated cyclodextrins in the chemoselective hydrogenation of benzene derivatives with ruthenium nanoparticles

Efficient chemoselectivities have been obtained in the hydrogenation of benzene derivatives under biphasic liquid-liquid conditions using Ru(0) nanoparticles stabilized and controlled by the relevant choice of cavity and methylation degree of cyclodextrins.     

High-throughput kinetic study of hydrogenation over palladium nanoparticles: combination of reaction and analysis

The hydrogenation of 1-acetylcyclohexene, cyclohex-2-enone, nitrobenzene, and trans-methylpent-3-enoate catalyzed by highly active palladium nanoparticles was studied by high-throughput on-column reaction gas chromatography. In these experiments, catalysis and separation of educts and products is integrated by the use of a catalytically active gas chromatographic stationary phase, which allows reaction rate measurements to be efficiently performed by employing reactant libraries. Palladium nanoparticles embedded in a stabilizing polysiloxane matrix serve as catalyst and selective chromatographic stationary phase for these multiphase reactions (gas-liquid-solid) and are coated in fused-silica capillaries (inner diameter 250 microm) as a thin film of thickness 250 nm. The palladium nanoparticles were prepared by reduction of palladium acetate with hydridomethylsiloxane-dimethylsiloxane copolymer and self-catalyzed hydrosilylation with methylvinylsiloxane-dimethylsiloxane copolymer to obtain a stabilizing matrix. Diphenylsiloxane-dimethylsiloxane copolymer (GE SE 52) was added to improve film stability over a wide range of compositions. Herein, we show by systematic TEM investigations that the size and morphology (crystalline or amorphous) of the nanoparticles strongly depends on the ratio of the stabilizing polysiloxanes, the conditions to immobilize the stationary phase on the surface of the fused-silica capillary, and the loading of the palladium precursor. Furthermore, hydrogenations were performed with these catalytically active stationary phases between 60 and 100 degrees C at various contact times to determine the temperature-dependent reaction rate constants and to obtain activation parameters and diffusion coefficients.     

Organometallic complexes in supported ionic-liquid phase (SILP) catalysts: a PHIP NMR spectroscopy study

para-Hydrogen induced polarization (PHIP) NMR spectroscopy emerges as an efficient and robust method for on-line monitoring of gas-phase hydrogenation reactions. Here we report detailed investigations of supported ionic liquid phase (SILP) catalysts in a continuous gas-phase hydrogenation of propene with PHIP NMR spectroscopy. A relocation of the rhodium complex in the thin layer of ionic liquid in the SILP catalyst at the initial stage of the propene hydrogenation is demonstrated. PHIP NMR spectroscopy can provide profound insight into the evolution of SILP catalysts during hydrogenation reactions.     

Towards a rational design of ruthenium CO2 hydrogenation catalysts by Ab initio metadynamics

Complete reaction pathways relevant to CO2 hydrogenation by using a homogeneous ruthenium dihydride catalyst ([Ru(dmpe)2H2], dmpe=Me2PCH2CH2PMe2) have been investigated by ab initio metadynamics. This approach has allowed reaction intermediates to be identified and free-energy profiles to be calculated, which provide new insights into the experimentally observed reaction pathway. Our simulations indicate that CO2 insertion, which leads to the formation of formate complexes, proceeds by a concerted insertion mechanism. It is a rapid and direct process with a relatively low activation barrier, which is in agreement with experimental observations. Subsequent H2 insertion into the formate--Ru complex, which leads to the formation of formic acid, instead occurs via an intermediate [Ru(eta2-H2)] complex in which the molecular hydrogen coordinates to the ruthenium center and interacts weakly with the formate group. This step has been identified as the rate-limiting step. The reaction completes by hydrogen transfer from the [Ru(eta2-H2)] complex to the formate oxygen atom, which forms a dihydrogen-bonded Ru--HHO(CHO) complex. The activation energy for the H2 insertion step is lower for the trans isomer than for the cis isomer. A simple measure of the catalytic activity was proposed based on the structure of the transition state of the identified rate-limiting step. From this measure, the relationship between catalysts with different ligands and their experimental catalytic activities can be explained.     

Asymmetric transfer hydrogenation of ketones using Ru(0) nanoparticles modified by Chiral Thiones

The catalytic asymmetric transfer hydrogenation (ATH) of acetophenone in isopropanol by Ru(0) nanoparticles (NPs) obtained by the in‐situ reduction of Ru (II) half‐sandwich complexes of chiral 2‐oxazolidinethiones and 2‐thiozolidinethiones was examined and compared with the catalytic activity of Ru(0) NPs formed in‐situ by the reduction of [Ru(p‐cymene)(Cl)₂]₂ in presence of optically active ligands such as (S)‐4‐isobutylthiazolidine‐2‐thione, (S)‐4‐Isopropyl‐2(?2‐pyridinyl)‐2‐oxazoline, (8S, 9R)‐(?)‐cinchonidine, (S)‐leucinol, (S)‐phenylalaninol, and (S)‐leucine. Three of the best catalytic systems were then examined for ATH of thirteen aromatic ketones with different electronic and steric properties. A maximum of 24% ee was obtained using NPs generated from the Ru (II) half‐sandwich complex with (S)‐4‐isobutylthiazolidine‐2‐thione in the TH of acetophenone. The NPs were characterized by TEM and DLS measurements. Kinetic studies and poisoning experiments confirmed that the reaction is catalyzed by the chiral NPs formed in‐situ. Complete characterization of the complexes, including the X‐ray crystallographic characterization of two complexes, was also carried out.     

Substituent effects on the stereochemistry of gas-phase intracomplex nucleophilic substitutions

The mechanism and stereochemistry of the intracomplex solvolysis of proton-bound complexes [Y...H...M]+ between M = CH3 (18)OH and Y = 1-arylethanol [(S)-1-(para-tolyl)ethanol (1S), (S)-1-(para-chlorophenyl)ethanol (2S), (S)-1-(meta-alpha,alpha,alpha-trifluoromethylphenyl)ethanol (3S), (S)-1-(para-alpha,alpha,alpha-trifluoromethylphenyl)ethanol (4S), (R)-1-(pentafluorophenyl)ethanol (5R), (R)-alpha-(trifluoromethyl)benzyl alcohol (6R), and (R)-1-phenylethanol (7R)] have been investigated in the gas phase (CH3F; 720 Torr) in the 25-140 degrees C temperature range. Gas-phase solvolysis of [Y...H...M]+ (Y=2S, 3S, 4S, and 7R) leads to extensive racemization above a characteristic temperature t(#) (e.g. at t(#)>60 degrees C for 7R), whereas below that temperature the reaction displays a preferential retention of configuration. Predominant retention of configuration is instead observed in the intracomplex solvolysis of [Y...H...M]+ (Y=1S, 4S, 5R, and 6R) with the temperature range investigated (25 相似文献   

用于生物质水相加氢多相负载型金属催化剂的稳定策略

生物质是天然的可再生能源和资源,具有来源广泛、储量丰富、价格低廉的优点以及可转化为高附加值化学品的多功能性,因此作为传统化石能源替代材料受到广泛关注和研究.将生物质通过催化转化为平台化合物再进一步利用是生物质利用的重要途径,其中催化加氢是常用的反应之一.由于绝大多数生物质平台化合物分子中都含氧元素,其加氢过程中会不可避...     

Monodisperse CuPt alloy nanoparticles assembled on reduced graphene oxide as catalysts in the transfer hydrogenation of various functional organic groups

We present herein a new nanocatalyst, namely binary CuPt alloy nanoparticles (NPs) supported on reduced graphene oxide (CuPt‐rGO), as a highly active heterogeneous catalyst for the transfer hydrogenation (TH) protocol that is demonstrated to be applicable over the reduction of various unsaturated organic compounds (olefins, aldehydes/ketones and nitroarenes) in aqueous solutions at room temperature. CuPt alloy NPs were synthesized by the co‐reduction of metal (II) acetylacetonates by borane‐tert‐butylamine (BTB) complex in hot oleylamine (OAm) solution and then assembled on reduced graphene oxide (rGO) via ultrasonic‐assisted liquid phase self‐assembly method. The structure of yielded CuPt NPs and CuPt‐rGO nanocatalyst were characterized by TEM, XRD and ICP‐MS. The activity of Cu₇Pt₃‐rGO nanocatalysts were then tested for the THs that were conducted in a commercially available high‐pressure tube using water as sole solvent and ammonia borane as a hydrogen donor at room temperature. The presented catalytic TH protocol was successfully applied over nitroarenes, olefines and aldehydes/ketones, and all the tested compounds were converted to corresponding reduction products with the yields reaching up to 99% under ambient conditions. Moreover, the Cu₇Pt₃‐rGO nanocatalyst was also reusable in the TH by providing 99% yield after five consecutive runs in TH of nitrobenzene as an example.     

Carbon dioxide hydrogenation catalyzed by a ruthenium dihydride: a DFT and high-pressure spectroscopic investigation

Reaction pathways during CO(2) hydrogenation catalyzed by the Ru dihydride complex [Ru(dmpe)(2)H(2)] (dmpe=Me(2)PCH(2)CH(2)PMe(2)) have been studied by DFT calculations and by IR and NMR spectroscopy up to 120 bar in toluene at 300 K. CO(2) and formic acid readily inserted into or reacted with the complex to form formates. Two formate complexes, cis-[Ru(dmpe)(2)(OCHO)(2)] and trans-[Ru(dmpe)(2)H(OCHO)], were formed at low CO(2) pressure (<5 bar). The latter occurred exclusively when formic acid reacted with the complex. A RuHHOCHO dihydrogen-bonded complex of the trans form was identified at H(2) partial pressure higher than about 50 bar. The trans form of the complex is suggested to play a pivotal role in the reaction pathway. Potential-energy profiles along possible reaction paths have been investigated by static DFT calculations, and lower activation-energy profiles via the trans route were confirmed. The H(2) insertion has been identified as the rate-limiting step of the overall reaction. The high energy of the transition state for H(2) insertion is attributed to the elongated Ru--O bond. The H(2) insertion and the subsequent formation of formic acid proceed via Ru(eta(2)-H(2))-like complexes, in which apparently formate ion and Ru(+) or Ru(eta(2)-H(2))(+) interact. The bond properties of involved Ru complexes were characterized by natural bond orbital analysis, and the highly ionic characters of various complexes and transition states are shown. The stability of the formate ion near the Ru center likely plays a decisive role for catalytic activity. Removal of formic acid from the dihydrogen-bonded complex (RuHHOCHO) seems to be crucial for catalytic efficiency, since formic acid can easily react with the complex to regenerate the original formate complex. Important aspects for the design of highly active catalytic systems are discussed.     

Pd@tetrahedral hollow magnetic nanoparticles coated with N‐doped porous carbon as an efficient catalyst for hydrogenation of nitroarenes

Hollow magnetic nanoparticles (MNPs) with tetrahedral morphology were synthesized and then covered by a shell prepared by coating with melamine–formaldehyde followed by the introduction of glucose‐derived carbon. Subsequently, Pd nanoparticles were immobilized and the core–shell nanocomposite was carbonized. The obtained magnetic catalyst was successfully applied for the hydrogenation of nitroarenes in aqueous media. To investigate the effects of the morphology of MNPs, the nature of carbon shell, and the order of incorporation of Pd nanoparticles, several control catalysts, including the MNPs with different morphologies (disc‐like and cylinder); MNPs coated with different shells (sole glucose‐derived carbon or melamine–formaldehyde carbon shell); and a nanocomposite, in which Pd was immobilized after carbonization, were prepared and examined as catalyst for the model reaction. To justify the observed different catalytic activities of the catalysts, their Pd loadings, leaching, and specific surface areas were compared. The results confirmed that tetrahedral MNPs coated with porous N‐rich carbon shell exhibited the best catalytic activity. The high catalytic activity of this catalyst was attributed to its high surface area and the interaction of N‐rich shell with Pd nanoparticles that led to the higher Pd loading and suppressed Pd leaching.     

"Click" dendrimers: synthesis, redox sensing of Pd(OAc)2, and remarkable catalytic hydrogenation activity of precise Pd nanoparticles stabilized by 1,2,3-triazole-containing dendrimers

"Click" dendrimers containing 1,2,3-triazolyl ligands that coordinate to PdII(OAc)2 have been synthesized in view of catalytic applications. Five of these dendrimers contain ferrocenyl termini directly attached to the triazole ligand in order to monitor the number of PdII that are introduced into the dendrimers by cyclic voltammetry. Reduction of the PdII-triazole dendrimers by using NaBH4 or methanol yields Pd nanoparticles (PdNPs) that are stabilized either by several dendrimers (G0, DSN) or by encapsulation inside a dendrimer (G1 and G2: DEN), as confirmed by TEM. Relative to PAMAM-DENs (PAMAM=poly(amidoamine)), the "click" DSNs and DENs show a remarkable efficiency and stability for olefin hydrogenation under ambient conditions of various substrates. The influence of the reductant of PdII bound to the dendrimers is dramatic, reduction with methanol leading to much higher catalytic activity than reduction with NaBH4. The most active NPs are shown to be those derived from dendrimer G1, and variation of its termini groups (ferrocenyl, alkyl, phenyl) allowed us to clearly delineate, optimize, and rationalize the role of the dendrimer frameworks on the catalytic efficiencies. Finally, hydrogenation of various substrates catalyzed by these PdNPs shows remarkable selectivity features.