在轴向应力波传播和反射过程中弹性有限长圆柱壳非对称动态屈曲

本文讨论弹性有限长圆柱壳端部受冲击载荷作用，在轴向应力波传播和反射过程中的非对称动态屈曲问题。通过建立和求解扰动方程得到了动态屈曲的分叉条件，临界载荷和屈曲模态。数值结果表明：当壳壁厚不很薄时，轴对称屈曲临界载荷比非轴对称临界载荷高；反之，轴对称临界载荷会比非对称临界载荷低；由于应力波的反射，临界载荷降低，因而更容易发生屈曲，屈曲模态也有其不同特点。     

辛方法和弹性圆柱壳在内外压和轴向冲击下的动态屈曲

针对有内压或外压的弹性圆柱壳在轴向冲击载荷耦合作用下的动态屈曲问题,构造哈密顿体系,在辛空间中将临界载荷和动态屈曲模态归结为辛本征值和本征解问题,从而形成一种辛方法。该方法直接得到非轴对称的屈曲模态。数值结果给出了圆柱壳问题的临界载荷和屈曲模态以及一些规律。     

弹性圆柱壳在轴向应力波传播过程中的非对称屈曲

讨论弹性圆柱壳端部受冲击载荷作用，在应力波传播过程中的非对称屈曲问题。通过求解扰动方程得到了动态屈曲的分叉条件、临界载荷和屈曲模态。数值结果表明，当壳壁厚不很薄时，轴对称屈曲临界载荷比非对称临界载荷高；反之，轴对称临界载荷会比非对称临界载荷低。不同的冲击载荷，屈曲模态也将不同。     

辛方法在弹性圆板屈曲问题中的应用

在辛几何空间中将临界载荷和屈曲模态归结为辛本征值和本征解问题,从而形成一种辛方法.研究和讨论了轴对称屈曲和非轴对称屈曲问题,它们分别属于零本征值问题和非零本征值问题.以弹性圆板屈曲问题作为研究对象,借助于系统的能量构造出哈密顿体系,得到了该体系下的所有的本征解.数值结果给出了圆板和圆环板问题的临界载荷和屈曲模态.数值结果表明:对应低阶屈曲模态的临界载荷相对较小且屈曲模态在周向的波纹数也较少,说明在屈曲过程中低阶屈曲模态容易出现,特别是轴对称屈曲更容易发生;对应较大分支数的临界载荷,其值相对较大且屈曲模态在径向的波纹更加复杂;同时物理常数和几何参数也会直接影响临界载荷的大小.     

轴向冲击载荷作用下弹性圆柱壳横向弯曲动态屈曲

研究在轴向冲击载荷下弹性圆柱壳动态屈曲问题.通过构造哈密顿体系,在辛空间中将临界载荷和动态屈曲模态归结为辛本征值和本征解问题.辛本征解反映了局部的压缩屈曲模态和整体的弯曲屈曲模态,特别是在冲击端为自由支承边界时的特殊屈曲方式.数值结果给出了具体的临界载荷和屈曲模态规律.     

充满液体的封闭圆柱壳受轴压时屈曲过程的实验研究

报导了对充满水的金属圆柱薄壳在轴向压缩时屈曲性能的实验结果。实验观察表明，充满液体的金属圆柱壳在轴压作用下的屈曲模态呈轴对称型，液体的内压与外部轴压随轴向缩短的变化趋势大致相同。由于壳内液体的存在，同内空的圆柱壳相比只是临界载荷略有提高，屈曲后承载能力并无显著降低，且对初始几何缺陷表现得远不象内空柱壳那样敏感。     

圆柱薄壳的动相变屈曲行为

利用MTS809材料试验机对TiNi圆柱薄壳进行了轴向动渐进相变屈曲实验,对轴向冲击下处于伪弹性状态的TiNi合金柱壳的动相变屈曲行为进行了数值模拟研究。结果表明,不同的加载强度将会激发出柱壳不同的动屈曲响应模态。当冲击速度较高时,柱壳两端首先形成轴对称环形相变屈曲波纹,并产生应力平台;随着马氏体含量不断增加,环形相变屈曲波纹逐渐贯穿整个壳体,名义应力缓慢抬升;当名义应变超过一定阈值时,对称环形屈曲模态突变为非轴对称块状屈曲模态,名义应力大幅下降。撞击速度为40 m/s的算例（含10％随机缺陷）与S.Nemat-Nasser等的实验结果很好吻合,说明本文中计算模型、方法和结果的有效性经过了实验的考核。结果还表明,相变耗能是TiNi柱壳吸收冲击能量的主要机制,适合制作可重复使用的高效吸能元件,并给出了相应的理想厚径比。     

充满水的金属圆柱壳经受轴向撞击时屈曲过程的实验研究

本文报道了五种规格充满水的圆柱壳经受大质量低速度轴向撞击作用时屈曲过程的实验结果。研究表明由于液体的存在，圆柱壳的屈曲模态呈轴对称型的环带波纹，整个撞击过程可以明显地分为振荡的动力加载、平稳发展的后屈曲和迅速下降的弹性卸载三个阶段。并讨论了试件壁厚和高度等几何参数对其屈曲性能的影响。     

圆柱约束下细长压杆屈曲及后屈曲行为

研究了轴向力作用下受圆柱横向约束的弹性杆的屈曲和后屈曲行为。通过有限元模拟,分析了细长压杆发生正弦和螺旋屈曲的轴向临界力,提出了正弦和螺旋屈曲临界点判定方法,且与文献结果比较验证了分析的正确性。同时考察了长细比和边界条件等因素对临界力的影响。结果表明正弦屈曲临界力和螺旋屈曲临界力随杆的长细比减小而增大。杆在一定长度范围内,端部约束条件对临界屈曲载荷及模态的影响不可忽略;当杆的长度足够长时,可以忽略边界条件对临界载荷的影响。     

轴向瞬间阶梯载荷下圆柱壳动力屈曲的双特征参数分析

对于轴向瞬间阶梯载荷下圆柱壳的弹性非轴对称动力屈曲问题，将临界应力和屈曲惯性项指数参数作为双特征参数求解。由能量转换和守恒准则，导出压缩波阵面上的屈曲变形附加约束条件。失稳控制方程、边界条件和波阵面上的连续条件，连同此附加约束条件构成求解两个特征参数和动力失稳模态的完备定解条件。由伽辽金法得出求解双特征参数问题的数值方法。     

The 7th International Conference on Fluid Mechanics May 24-27,2015,Qingdao,China

正http://www.icfm7.org First Announcement and Call for PapersThe objective of International Conference on Fluid Mechanics(ICFM)is to provide a forum for researchers to exchange new ideas and recent advances in the fields of theoretical,experimental,computational Fluid Mechanics as well as interdisciplinary subjects.It was successfully convened by the Chinese Society of Theoretical and Applied Mechanics(CSTAM)in Beijing(1987,     

INFORMATION FOR CONTRIBUTORS

Contributions： The Journal, Acta Mechanica Solida Sinica, is pleased to receive papers from engineers and scientists working in various aspects of solid mechanics. All contributions are subject to critical review prior to acceptance and publication.     

Preface

This special issue of PARTICUOLOGY is devoted to the first UK-China Particle Technology Forum taking place in Leeds, UK, on 1-3 April 2007. The forum was initiated by a number of UK and Chinese leading academics and organised by the University of Leeds in collaboration with Chinese Society of Particuology, Particle Technology Subject Group （PTSG） of the Institution of Chemical Engineers （IChemE）, Particle Characterisation Interest Group （PCIG） of the Royal Society of Chemistry （RSC） and International Fine Particle Research Institute （IFPRI）. The forum was supported financially by the Engineering and Physics Sciences Research Council （EPSRC） of United Kingdom,     

基于鲁棒滤波的捷联导引头视线角速度估计方法

针对捷联导引头无法直接获取视线角速度等信息的问题,研究了鲁棒滤波在大气层外飞行器捷联导引头视线角速度估计中的应用。为了建立非线性滤波估计模型,考虑目标视线角速度的慢变特性,采用一阶马尔科夫模型建立了状态方程;推导了视线角速度的解耦模型,并建立了量测方程;考虑到实际应用中存在系统噪声统计特性失准的问题,基于Huber-Based鲁棒滤波方法,设计了视线角速度滤波器,并完成了基于Huber-Based滤波方法和扩展卡尔曼滤波方法的数学仿真。仿真结果表明Huber-Based滤波方法的视线角、视线角速度及视线角加速度估计精度分别达到0.1140'、0.1423'/s、0.0203'/s2,而扩展卡尔曼滤波方法的视线角、视线角速度及视线角加速度估计精度仅分别为0.6577'、0.6415'/s、0.0979'/s~2。仿真结果证明了该方法可以有效地估计出相对视线角速度等信息,并且在非高斯噪声的条件下,依然可获得较高的估计精度,具有一定的鲁棒性。     

Guide for authors

正Each of the sections below provides essential information for authors.We recommend that you take the time to read them before submitting a contribution to Acta Mechanica Sinica.We hope our guide to authors may help you navigate to the appropriate section.How to prepare a submission This document provides an outline of the editorial process involved in publishing a scientific paper in Acta Mechanica     

Use specification of multiscale materials for life spanned over macro-, micro-, nano-, and pico-scale

Multiscale material intends to enhance the strength and life of mechanical systems by matching the transmitted spatiotemporal energy distribution to the constituents at the different scale, say—macro, micro, nano, and pico,—, depending on the needs. Lower scale entities are, particularly, critical to small size systems. Large structures are less sensitive to microscopic effects. Scale shifting laws will be developed for relating test data from nano-, micro-, and macro-specimens. The benefit of reinforcement at the lower scale constituents needs to be justified at the macroscopic scale. Filling the void and space in regions of high energy density is considered.Material inhomogeneity interacts with specimen size. Their combined effect is non-equilibrium. Energy exchange between the environment and specimen becomes increasingly more significant as the specimen size is reduced. Perturbation of the operational conditions can further aggravate the situation. Scale transitional functions and/or f_j/j+1 are introduced to quantify these characteristics. They are represented, respectively, by , and (f_mi/ma,f_na/mi,f_pi/na). The abbreviations pi, na, mi, and ma refer to pico, nano, micro and macro.Local damage is assumed to initiate at a small scale, grows to a larger scale, and terminate at an even larger scale. The mechanism of energy absorption and dissipation will be introduced to develop a consistent book keeping system. Compaction of mass density for constituents of size 10⁻¹², 10⁻⁹, 10⁻⁶, 10⁻³ m, will be considered. Energy dissipation at all scales must be accounted for. Dissipations at the smaller scale must not only be included but they must abide by the same physical and mathematical interpretation, in order to avoid inconsistencies when making connections with those at the larger scale where dissipations are eminent.Three fundamental Problems I, II, and III are stated. They correspond to the commonly used service conditions. Reference is made to a Representative Tip (RT), the location where energy absorption and dissipation takes place. The RT can be a crack tip or a particle. At the larger size scales, RT can refer to a region. Scale shifting of results from the very small to the very large is needed to identify the benefit of using multiscale materials.