Using Valence Bond Theory to Understand Electronic Excited States:Application to the Hidden Excited State of Linear Polyenes

A VB method is presented and applied to calculate the hidden excited states, 2¹A_g and other covalent excited states of polyenes from C₄H₆ to C₂₈H₃₀. The ground rules needed to understand the results are qualitatively outlined and used to discuss the asymptotic behavior of these molecules as n goes to infinity. The theory enables to understand in a coherent and lucid manner excited state properties, such as the make-up of the various states, their energies, geometries, the puzzling increase of the C=C frequency in the excited state, the opposite bond alternation properties of the ground and excited, isomerization patterns, soliton characters, etc.     

An Improved Procedure for Cyclisation of Chalcones to Flavanones Using Celite Supported Potassium Fluoride in Methanol: Total Synthesis of Bavachinin

Chalcones may be cyclised to the corresponding flavanones by stirring with KF-celite suspended in methanol at reflux. This method gives consistently higher conversion than other reported procedures and its utility is illustrated by the synthesis of the linear prenylated flavanone bavachinin.     

Thorough Investigation of the Phenolic Profile of Reputable Greek Honey Varieties: Varietal Discrimination and Floral Markers Identification Using Liquid Chromatography–High-Resolution Mass Spectrometry

Honey is a highly consumed commodity due to its potential health benefits upon certain consumption, resulting in a high market price. This fact indicates the need to protect honey from fraudulent acts by delivering comprehensive analytical methodologies. In this study, targeted, suspect and non-targeted metabolomic workflows were applied to identify botanical origin markers of Greek honey. Blossom honey samples (n = 62) and the unifloral fir (n = 10), oak (n = 24), pine (n = 39) and thyme (n = 34) honeys were analyzed using an ultra-high-performance liquid chromatography hybrid quadrupole time-of-flight mass spectrometry (UHPLC-q-TOF-MS) system. Several potential authenticity markers were revealed from the application of different metabolomic workflows. In detail, based on quantitative targeted analysis, three blossom honey markers were found, namely, galangin, pinocembrin and chrysin, while gallic acid concentration was found to be significantly higher in oak honey. Using suspect screening workflow, 12 additional bioactive compounds were identified and semi-quantified, achieving comprehensive metabolomic honey characterization. Lastly, by combining non-targeted screening with advanced chemometrics, it was possible to discriminate thyme from blossom honey and develop binary discriminatory models with high predictive power. In conclusion, a holistic approach to assessing the botanical origin of Greek honey is presented, highlighting the complementarity of the three applied metabolomic approaches.     

A Tandem Olefin Migration and Prins Cyclization Using Cu(OTf)(2)-Bisphosphine Complexes: An Improved Synthesis of Functionalized Tetrahydropyrans

In situ-generated (bis-DPPMB)-Cu(OTf)₂ complex has been examined to catalyze a tandem olefin migration and Prins cyclization of an alkenol with various aldehydes. The reaction proceeded with electron-rich aromatic aldehydes at room temperature and provided functionalized tetrahydropyrans in good yields. An efficient synthesis of the bis-DPPMB ligand has also been described.     

Biotechnological Approaches on Two High CBD and CBG Cannabis sativa L. (Cannabaceae) Varieties: In Vitro Regeneration and Phytochemical Consistency Evaluation of Micropropagated Plants Using Quantitative 1H-NMR

High cannabidiol (CBD) and cannabigerol (CBG) varieties of Cannabis sativa L., a species with medicinal properties, were regenerated in vitro. Explants of nodal segments including healthy axillary bud, after sterilization, were placed in Murashige-Skoog (MS) culture medium. The shoots formed after 30 days were subcultured in full- or half-strength MS medium supplemented with several concentrations of 6-benzyl-amino-purine (BA) or thidiazuron (TDZ). The highest average number and length of shoots was achieved when both full and half-strength MS media were supplemented with 4.0 μM BA. The presence of 4.0 μM TDZ showed also comparable results. BA and TDZ at concentrations of 4.0, 8.0 μM and 2.0, 4.0 μM respectively, displayed the maximum shooting frequency. The new shoots were transferred on the same media and were either self-rooted or after being enhanced with different concentrations of indole-3-butyric acid (IBA) or α-naphthalene acetic acid (NAA). Presence of 2.0 or 4.0 μM IBA or 4.0 μM NAA resulted to the optimum rooting rates. The maximum average number and length of roots per shoot was observed when the culture media was supplemented with 4.0 μM IBA or NAA. Approximately 92% of the plantlets were successfully established and acclimatized in field. The consistency of the chemical profile of the acclimatized in vitro propagated clones was assessed using quantitative ¹H-NMR high throughput screening. In each variety, analysis of the micropropagated plant in comparison with the mother plant showed no statistically significant differences (p ≤ 0.05) in CBD+ cannabidiolic acid (CBDA) and CBG+ cannabigerolic acid (CBGA) content respectively, thus indicating stability of their chemical profile.     

Improved Molecular Weight Control in Ring‐Opening Metathesis Polymerization (ROMP) Reactions with Ru‐Based Olefin Metathesis Catalysts Using N Donors and Acid: A Kinetic and Mechanistic Investigation

The effect of the addition of H₃PO₄ on the ROMP activity of cyclooctene (COE) with first‐ [Cl₂(PCy₃)₂Ru?CHPh] and second‐generation [(H₂IMes)Cl₂(PCy₃)Ru?CHPh] Grubbs’ catalysts 1 and 4 (Cy=cyclohexyl, Ph=phenyl, Mes=2,4,6‐trimethylphenyl (mesityl)), their inhibited mixtures with 1‐methylimidazole (MIM), as well as their isolated bis‐N,N′‐dimethylaminopyridine (DMAP) derivatives [Cl₂(PCy₃)(DMAP)₂Ru?CHPh)] ( 5 b ) and [Cl₂(H₂IMes)(DMAP)₂Ru?CHPh] ( 7 b ) (DMAP=dimethylaminopyridine), a novel catalyst, has been investigated. The studies include the determination of their initiation rates, as well as a determination of the molecular weights and molecular weight distributions of the polymers obtained with these catalysts and catalyst mixtures from the exo‐7‐oxanorbornene derivative 11 . The structure of catalyst 7 b was confirmed by means of X‐ray diffraction. All N‐donor‐bearing catalysts or N‐donor‐containing catalyst mixtures not only exhibited elevated activity in the presence of acid, but also increased initiation rates. Using the reversible inhibition/activation protocol with MIM and H₃PO₄ enabled us to conduct controlled ROMP with catalyst 4 producing the isolated exo‐7‐oxanorbornene‐based polymer 12 with predetermined molecular weights and narrow molecular weight distributions. This effect was based on fast and efficient catalyst initiation in contrast to the parent catalyst 4 . Hexacoordinate complex 5 b also experienced a dramatic increase in initiation rates upon acid‐addition and the ROMP reactions became well‐controlled in contrast to the acid‐free reaction. In contrast, complex 7 b performs well‐controlled ROMP in the absence of acid, whereas the polymerization of the same monomer becomes less controlled in the presence of H₃PO₄. The closer evaluation of catalysts 5 b and 7 b demonstrated that their initiation rates exhibit a linear dependency on the substrate concentration in contrast to catalysts 1 and 4 . As a consequence, their initiation rates are determined by an associative step, not a dissociative step as seen for catalysts 1 and 4 . A feasible associative metathesis initiation mechanism is proposed.     

Biomimetic Synthesis of Metal Ion‐Doped Hierarchical Crystals Using a Gel Matrix: Formation of Cobalt‐Doped LiMn2O4 with Improved Electrochemical Properties through a Cobalt‐Doped MnCO3 Precursor

We have synthesized spinel type cobalt‐doped LiMn₂O₄ (LiMn_2?yCo_yO₄, 0≤y≤0.367), a cathode material for a lithium‐ion battery, with hierarchical sponge structures via the cobalt‐doped MnCO₃ (Mn_1‐xCo_xCO₃, 0≤x≤0.204) formed in an agar gel matrix. Biomimetic crystal growth in the gel matrix facilitates the generation of both an homogeneous solid solution and the hierarchical structures under ambient condition. The controlled composition and the hierarchical structure of the cobalt‐doped MnCO₃ precursor played an important role in the formation of the cobalt‐doped LiMn₂O₄. The charge–discharge reversible stability of the resultant LiMn_1.947Co_0.053O₄ was improved to ca. 12 % loss of the discharge capacity after 100 cycles, while pure LiMn₂O₄ showed 24 % loss of the discharge capacity after 100 cycles. The parallel control of the hierarchical structure and the composition in the precursor material through a biomimetic approach, promises the development of functional materials under mild conditions.