催化褪色光度法测定海洋生物中痕量硒

在pH =3的HCl KHC8H4O4缓冲介质中 ,硒 能催化溴酸钾氧化甲基紫的褪色反应 ,据此建立了催化动力学光度测定痕量硒的新方法。优化了动力学反应条件 ,并对海洋生物样品测定的前处理过程进行了研究。该方法对硒的检出限为 0 .14μg L ,线性范围为 0～ 8μg L ,精密度和准确度良好 ,对牡蛎等海洋生物样品中总硒含量测定的RSD <10 %,回收率为 96 %～ 10 7%,与DAN荧光光度法测定结果的相对偏差 <± 6 %。     

蒸气发生-电感耦合等离子体质谱法测定碘

建立了一种在线化学蒸气发生-电感耦合等离子体质谱测定碘的方法。利用碘负离子的还原性,采用氧化还原手段,将碘负离子氧化为碘单质;然后通过碘单质的易挥发特点,将碘蒸气直接导入等离子体。该方法可以提高传输效率,改善样品利用率,使检测灵敏度得到极大的提高。方法的检出限为0.22μg/L,样品加标回收率在87.4%~97.75%之间,RSD(n=11)在3%以内。实验中预先将正5价碘还原成碘负离子,然后加入氧化剂将碘负离子氧化成碘单质进行检测;对碘的形态化学蒸气发生法进行了尝试。     

催化动力学荧光法测定痕量培氟沙星

研究了培氟沙星对铜(Ⅱ)催化过氧化氢氧化罗丹明B使其荧光猝灭的抑制作用,据此建立了催化动力学荧光分析法测定培氟沙星的新方法。在最佳实验条件下,方法线性范围为0.2~4.29μg/mL,检出限为0.2μg/L。对实际样品分析,平均回收率为97.6%~101.7%,相对标准偏差为1.03%~1.9%。     

共振瑞利散射法测定微量硒

在稀HCl中硒(Ⅳ)与抗坏血酸(Vc)反应生成单质硒Se(0),并在液相中以纳米粒子的形式存在。利用此纳米粒子在470nm处的共振瑞利散射峰可对硒进行测定。在0.028~5.640μg/mL范围内,共振瑞利散射强度与硒(Ⅳ)的质量浓度成线性关系,检出限为0.00789μg/mL,相对标准偏差为4.7%。应用此法测定了茶叶、螺旋藻、黄芪样品中的总硒量,通过与例行方法DAN荧光法对照、干扰实验、回收率实验及质量控制对本方法进行了评价。     

高通量研磨-X射线荧光光谱法测定不同植源性食品中硒含量北大核心

为了提高食品的样品检验效率,采用高通量研磨制备样品,利用X射线荧光光谱法对食品中硒含量进行检测。重点研究了样品含水率、样品颗粒粒径、研磨条件、检测条件等因素对检测结果的影响。结果表明:样品干基含水量小于20%,样品颗粒粒径小于100μm;高通量研磨条件为装样量3 g,频率30 Hz,研磨3 min;高精度X射线荧光光谱仪检测条件为检装样量0.2 g,PP膜压紧,检测90 s时的情况下,硒的检出限0.01 mg/kg,仪器的精密度小于5%,与粉碎法进行对比,相对偏差在-10.37%~8.05%。说明高通量研磨-X射线荧光光谱法检测食品中硒含量的方法快速、准确,可以满足批量样品现场检测分析需求。     

萃取—石墨炉原子吸收法测定粮食中硒

本文介绍一种灵敏而准确的方法用于测定粮食中硒。于APDC—MIBK体系中加入微克量铜或镍进行协同萃取,不仅可提高测定硒的灵敏度,而且由于生成较稳定的硒化物,可使硒的灰化温度提高到1200℃而不致挥发损失,较大程度地提高了测定硒的准确度。在涂锆石墨管中可准确测定粮食样品中0.045—0.307μg/g的硒。回收率达96—102%,相对标准偏差为3.3%,检出限为0.010μg/g硒。     

广东某高校学生膳食硒摄入状况

为了解广东大学生膳食硒的摄入状况,进而了解广州市居民的膳食硒摄入状况,采用单纯随机抽样的方法随机选取广东某高校某班学生10人,男女生各半,用双份饭法收集这10名学生连续7d内每天摄入的全部食物（包括饮水、饮料、零食等）,共70份样品,用荧光分光光度法测定了各样品的硒含量,得到学生在调查期间膳食硒的摄入状况。结果表明,男、女生人均膳食硒摄人量分别为86．51μg／d和69．92μg／d,学生总体人均膳食硒摄入量为78．22μg／d。该校学生膳食硒的摄入量达到了中国营养学会推荐的参考摄入量（50—250μg／d）的要求。     

共沉淀富集-氢化物发生-原子荧光光谱法测定山药中砷和硒含量

山药样品经硝酸和过氧化氢微波消解后,所得消解液在pH 11～12的介质中,加入0.1mol.L-1氯化镧溶液达到共沉淀分离,所得沉淀经离心分离后用盐酸(1+1)溶液溶解,并用于氢化物发生-原子荧光光谱法分析。砷和硒的质量浓度均在40.0μg.L-1以内与荧光强度呈线性关系,方法的检出限(3σ)依次为砷0.014μg.L-1和硒0.022μg.L-1。应用此法对山药样品进行分析,测得砷和硒的回收率分别为102%,96.8%。     

二阶梯度升温热解吸法测定空气中的微量丙烯腈和乙腈

采用气体采样泵将空气样品的丙烯腈和乙腈吸附到吸附管中,用二阶梯度升温将吸附管中的被测物质解吸到冷阱中,再快速对冷阱升温,将冷阱中的被测物质解吸进入色谱柱进行分离,用气相色谱氢火焰检测器检测空气中的微量丙烯腈和乙腈。丙烯腈、乙腈的色谱峰面积与吸附质量的线性相关系数均大于0.995。该法对实际空气样品中丙烯腈的检出限为5μg/m3,乙腈的检出限为10μg/m3,加标回收率均大于90%。     

断续流动氢化物发生原子荧光法测定富硒食品中的微量硒

建立了断贯流动氢化物发生原子荧光法测定富硒食品中微量硒的方法。样品用硝酸高氯酸混酸消化，在优化的实验条件下，标准曲线的线性范围为0-100μg/L，相关系数为0.9999。检测限0.06545μg/L。应用于测定鸡蛋，富硒米和富硒盐中微量硒的测定。回收率分别为90.6%,98.5%和104.3%。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.