基于还原氧化石墨烯-钯复合材料的双酚A分子印迹电化学传感器的研究

采用分子印迹技术,以还原氧化石墨烯-钯复合材料(rGO@Pd)修饰电极为工作电极,双酚A为模板分子,吡咯为聚合单体,成功制备出双酚A分子印迹电化学传感器。采用循环伏安法(CV)、差分脉冲伏安法(DPV)和电化学交流阻抗法(EIS)等,考察了该传感器的电化学性能。利用扫描电子显微镜(SEM)、傅立叶红外光谱(FT-IR)等技术对传感器表面进行结构分析。在最佳实验条件下,该电极的峰电流与双酚A在1.0~10.0 nmol/L浓度范围内呈良好线性关系,相关系数(r)为0.997 7,检出限(S/N=3)为0.1 nmol/L。该电极表现出良好的灵敏度、选择性、重现性和稳定性,已成功应用于自来水中双酚A含量的测定,加标回收率为92.1%~108.0%。     

金属复合材料基电化学传感器在双酚A检测中的应用研究

金属纳米颗粒作为电极修饰材料具有较高的电催化活性和稳定性,但该类材料存在分散性较差、易团聚等缺点.为此,通过金属纳米粒子的负载和稳定化等手段构建灵敏度高、选择性好和响应快的金属复合材料基电化学传感器成为当前的研究热点之一.本文就金属复合材料基电化学传感器的研究进展,以及其在双酚A(BPA)检测中的应用进行评述,为其今后...     

还原氧化石墨烯-多壁碳纳米管复合膜负载金纳米粒子修饰玻碳电极检测双酚A

以水合肼为还原剂,采用均相还原法制备还原氧化石墨烯-多壁碳纳米管复合材料(rGO-MWCNTs),通过滴涂法将其修饰到玻碳电极(GCE)表面.以此复合材料为载体,采用电化学方法制备了金纳米粒子-还原氧化石墨烯-多壁碳纳米管复合膜修饰电极(AuNPs-rGO-MWCNTs/GCE).通过扫描电镜(SEM)、EDS能谱技术和电化学方法对此电极进行了表征.研究了双酚A在修饰电极上的电化学行为.结果表明,此电极对双酚A的电极过程具有良好的电化学活性,在0.10 mol/L PBS溶液(pH 7.0)中,微分脉冲伏安法测定双酚A的线性范围为5.0 × 10-9~1.0 × 10-7 mol/L和1.0 × 10-7~2.0 × 10-5 mol/L,检出限为1.0 ×10-9 mol/L(S/N=3). 将此电极用于模拟水样和超市购物小票样品中双酚A含量的测定,加标回收率分别为97%~110%和98%~104%.     

电化学法制备石墨烯及其复合材料

石墨烯是一种具有优异物理和化学性质的新型二维碳纳米材料,大规模低成本制备高品质石墨烯的方法是其能够得到广泛实际应用的重要前提. 电化学方法可以快捷、绿色无污染、批量制备高质量的石墨烯及其复合材料. 本综述在对石墨烯各种制备方法进行简要比较之后,对近年来石墨烯、石墨烯/无机纳米复合材料、石墨烯/聚合物复合材料以及类石墨烯材料的电化学法制备进展进行介绍并作了展望.     

双酚A在壳聚糖石墨烯复合膜电化学传感器上的电化学行为及测定

采用hummers法制备了石墨烯,以碳糊电极为基底电极采用滴涂法制备了壳聚糖石墨烯复合膜电化学传感器(CTS/GR/CPE),并利用循环伏安法和线性扫描溶出伏安法研究了双酚A在电化学传感器上的电化学行为。在pH 7.4的磷酸盐缓冲液中,于-0.1V富集180s后,该电化学传感器对双酚A具有良好的电催化作用,于0.564V处有一灵敏的氧化峰,线性范围为1.00×10-6～7.00×10-5mol/L和7.00×10-5～1.00×10-3mol/L,检出限(S/N=3)为1.00×10-7mol/L。方法用于塑料制品中溶出双酚A的测定,回收率为96.4%～100.5%。     

基于AuNP/PEI/MWCNTs构筑的双酚A电化学传感器

制备了一种基于AuNP/PEI/MWCNTs纳米复合材料的电化学传感器,并通过循环伏安法(CV)测定痕量的双酚A(BPA).AuNP紧密地锚固在管状交联的聚乙烯亚胺均匀包裹的多壁碳纳米管(MWCNTs)的空隙中形成AuNP/PEI/MWCNTs.利用场发射扫描电子显微镜和粉末X射线衍射对AuNP/PEI/MWCNTs纳...     

石墨烯/还原氧化石墨烯/聚苯胺复合材料的制备及在超级电容器中的应用

本研究以低成本、易规模化的亲水性石墨烯/氧化石墨烯为前驱体,通过原位聚合的方法制备石墨烯/氧化石墨烯/聚苯胺复合材料,经过化学还原后制备得到石墨烯/还原氧化石墨烯/聚苯胺复合材料.采用扫描电子显微镜(SEM)、透射电子显微镜(TEM)和傅里叶红外变化光谱仪(FT-IR)对制备的材料进行了结构和形貌的表征.运用循环伏安法...     

基于石墨烯功能复合材料的DNA电化学生物传感器

石墨烯(Gr)是一类由单层碳原子组成的二维碳质材料,利用它独特的结构和良好的物理、化学性能,可构筑出在电催化、电化学传感器和生物传感器等领域有着巨大应用潜力的新型Gr功能复合材料。基于Gr功能复合材料的DNA电化学传感器与常规DNA传感器相比,具有明显的特色和优势,已被应用于特异DNA靶序列的识别和传感领域。本文就基于Gr功能复合材料的DNA电化学传感器的近期进展作简要评述,包括Gr与Gr基金属、金属氧化物、高分子、生物分子复合材料的电化学性能及其在DNA电化学传感中的应用,并对该类DNA电化学传感器的发展方向和应用前景进行了展望。     

纳米银增强化学发光法测定塑料中的双酚A

研究发现在碱性介质中,纳米银对luminol-KMnO4化学发光体系的发光信号具有强烈的增敏作用,而双酚A对该体系具有明显的抑制作用,据此结合流动注射技术,建立了流动注射化学发光分析法测定塑料中双酚A的方法。该方法测定双酚A的线性范围为8.0×10-11～1.0×10-8g.mL-1(0.9926)和1.0×10-8～8.0×10-8g.mL-1(0.9916),检出限(3σ)为6.5×10-11g.mL-1。对5.0×10-10g.mL-1和5.0×10-8g.mL-1双酚A平行测定11次,其相对标准偏差为1.4%和1.0%。对反应机理进行了讨论。该方法简单、快速、灵敏度高,用于塑料制品中双酚A的测定,回收率为97.0%～105.0%。     

二氧化锆/石墨烯复合材料对亚硝酸盐的电化学传感研究

制备了一种二氧化锆/还原氧化石墨烯(ZrO2NPs/rGO)复合材料修饰电极的亚硝酸盐电化学传感器,并成功用于亚硝酸盐的检测.采用循环伏安法和电流-时间曲线考察了修饰电极的电化学行为.实验结果表明,ZrO2NPs/rGO复合材料修饰电极对亚硝酸盐具有良好的电流响应.在最优实验条件下,电流-时间曲线中的电流响应信号与亚硝酸盐浓度在3.0×10Symbolm@@_7～1.0×10Symbolm@@_6 mol/L和1.0×10Symbolm@@_6～6.0×10Symbolm@@_6 mol/L的范围内呈良好的线性关系,检测限为1.0×10Symbolm@@_7 mol/L(S/N 3).该传感器灵敏性高、稳定性和重现性好.使用此传感器检测实际样品香肠中的亚硝酸盐的回收率为93.7％～110.4％,相对标准偏差为1.6％～2.1％.     

Electrochemical Sensor for Sensitive Determination of Capsaicin Using Pd Decorated Reduced Graphene Oxide

In this work, the reduced graphene oxide functionalized with poly dimethyl diallyl ammonium chloride (PDDA) modified palladium nanoparticles (PDDA‐rGO/Pd) had been facile synthesized and used as the sensing layer for sensitive determination of capsaicin. The prepared composite was characterized by transmission electron microscopy, UV‐visible absorption spectroscopy. The image demonstrated that Pd nanoparticles were uniformly distributed on the graphene surface. The electrochemical properties of the prepared sensor were investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The results showed that the nanocomposite exhibits attractive electrocatalytic activity towards the oxidation of capsaicin. This attributed to the synergistic action of the excellent properties of Pd nanoparticles and graphene nanosheets. Under optimized conditions, the electrochemical sensor possessed a dynamic linear range from 0.32 μM to 64 μM with a detection limit of 0.10 μM (S/N=3) for capsaicin detection. Moreover, the cost‐effective and simple fabrication procedure, good reproducibility and stability as well as acceptable accuracy for capsaicin determination in actual samples are also the main advantages of this method, which might have broad application in other amide alkaloid detection.     

基于银纳米粒子/氧化石墨烯复合薄膜制备TNP电化学传感器

利用改进的Hummers法制备了氧化石墨烯(GO), 以葡萄糖为还原剂直接在GO表面沉积银纳米粒子(AgNPs)得到性能稳定的AgNPs/GO纳米复合材料;基于该纳米复合材料修饰电极构建了一种新型的2, 4, 6-三硝基苯酚(TNP)电化学传感器。采用原子力显微镜(AFM)、扫描电镜(SEM)、透射电镜(TEM)、紫外可见光谱(UV-Vis)和交流阻抗(EIS)等多种方法对纳米复合薄膜进行了表征;并研究了TNP在复合薄膜修饰电极上的电化学行为和动力学性质。结果表明, AgNPs/GO对TNP有较强的电催化活性, 在复合薄膜修饰电极出现一灵敏的氧化峰和3个还原峰;利用氧化峰可对TNP进行定量分析。同时整个电极过程明显不可逆, 电极反应受到吸附步骤控制;复合膜电极表面覆盖度为5.617×10^-8 mol·cm^-2, 在所研究电位下的速率常数为9.745×10^-5 cm·s^-1。在pH 6.8的磷酸缓冲液中, 当富集电位为-0.70 V, 富集时间为60 s;TNP氧化峰电流与其浓度在5.0×10^-9~1.0×10^-7 mol·L^-1范围内成良好线性关系, 相关系数为0.995 8, 检出限可达1.0×10^-9 mol·L^-1。所制备的电化学传感器稳定性和选择性较好;用于实际水样中TNP的现场快速检测, 加标回收率在 97.6%~103.9%之间。     

基于银纳米粒子/氧化石墨烯复合薄膜制备TNP电化学传感器

利用改进的Hummers法制备了氧化石墨烯(GO),以葡萄糖为还原剂直接在GO表面沉积银纳米粒子(AgNPs)得到性能稳定的AgNPs/GO纳米复合材料;基于该纳米复合材料修饰电极构建了一种新型的2,4,6-三硝基苯酚(TNP)电化学传感器。采用原子力显微镜(AFM)、扫描电镜(SEM)、透射电镜(TEM)、紫外可见光谱(UV-Vis)和交流阻抗(EIS)等多种方法对纳米复合薄膜进行了表征;并研究了TNP在复合薄膜修饰电极上的电化学行为和动力学性质。结果表明,AgNPs/GO对TNP有较强的电催化活性,在复合薄膜修饰电极出现一灵敏的氧化峰和3个还原峰;利用氧化峰可对TNP进行定量分析。同时整个电极过程明显不可逆,电极反应受到吸附步骤控制;复合膜电极表面覆盖度为5.617×10-8mol.cm-2,在所研究电位下的速率常数为9.745×10-5cm.s-1。在pH 6.8的磷酸缓冲液中,当富集电位为-0.70 V,富集时间为60 s;TNP氧化峰电流与其浓度在5.0×10-9~1.0×10-7mol.L-1范围内成良好线性关系,相关系数为0.995 8,检出限可达1.0×10-9mol.L-1。所制备的电化学传感器稳定性和选择性较好;用于实际水样中TNP的现场快速检测,加标回收率在97.6%~103.9%之间。     

An Electrochemical Sensor Based on Nitrogen‐doped Carbon Nanofiber for Bisphenol A Determination

In this paper, bisphenol A was determined by electrochemical method at a nitrogen‐doped carbon nanofiber modified carbon paste electrode (NCNF/CPE) with high sensitivity and good selectivity. NCNF was obtained by a simple electrospinning followed by carbonization procedure, in which polyacrylonitrile (PAN) as precursor and nitrogen doping was realized by re‐utilizing the tail gas that produced in the thermal pretreatment process. Good reproducibility and high stability were obtained for BPA detection at NCNF modified CPE. Current response plotted with BPA concentration was linear in the range of 0.1–60 μM with LOD of 0.05 μM. The proposed electrochemical sensor was employed for BPA determination with satisfactory recoveries for real water samples, indicating the practical applicability of NCNF/CPE.     

Electrochemical Sensor‐Based Ruthenium Nanoparticles on Reduced Graphene Oxide for the Simultaneous Determination of Ethinylestradiol and Amoxicillin

The composite material of reduced graphene and Ru nanoparticles (rGO/RuNP) was obtained by electrochemical oxidation of ruthenium nanoparticles immobilised on the glassy carbon electrode (GCE) surface and used for simultaneous electroanalysis of drugs. There are many discussions in the scientific community about the decrease in therapeutic efficacy of contraceptives when associated with antibiotics. The antibiotic effect of the antagonist can increase the contraceptive excretion levels in urine, indicating a reduction in the body and thus a decrease in the desired effect. Using the DPV technique, it was possible to quantify ethinylestradiol (EE2) and amoxicillin (AMX) with a linear response range, 5.50x10⁻⁸ – 1.20x10⁻⁶ mol L⁻¹, and LOD, 2.04 nmol L⁻¹ and 1.63 nmol L⁻¹, respectively. The results for the electrochemical behaviour of EE2 and AMX using GCE/rGO/RuNP were compared with GCE/rGO and GCE. The GCE/rGO/RuNP showed greater stability and separation anodic peak currents, suitable for the quantification of organic molecules in samples of environmental interest, as well as clinical and food samples.     

Simultaneous Electrochemical Determination of Hydroquinone and Bisphenol A using a Carbon Paste Electrode Modified with Silver Nanoparticles

In this paper, a rapid and sensitive modified electrode for the simultaneous determination of hydroquinone (HQ) and bisphenol A (BPA) is proposed. The simultaneous determination of these two compounds is extremely important since they can coexist in the same sample and are very harmful to plants, animals and the environment in general. A carbon paste electrode (CPE) was modified with silver nanoparticles (nAg) and polyvinylpyrrolidone (PVP). The PVP was used as a reducing and stabilizing agent of nAg from silver nitrate in aqueous media. The nAg‐PVP composite obtained was characterized by transmission electron microscopy and UV‐vis spectroscopy. The electrochemical behavior of HQ and BPA at the nAg‐PVP/CPE was investigated in 0.1 mol L⁻¹ B−R buffer (pH 6.0) using cyclic voltammetry (CV) and square wave voltammetry (SWV). The results indicate that the electrochemical responses are improved significantly with the use of the modified electrode. The calibration curves obtained by SWV, under the optimized conditions, showed linear ranges of 0.09–2.00 μmol L⁻¹ for HQ (limit of detection 0.088 μmol L⁻¹) and 0.04–1.00 μmol L⁻¹ for BPA (limit of detection 0.025 μmol L⁻¹). The modified electrode was successfully applied in the analysis of water samples and the results were comparable to those obtained using UV‐vis spectroscopy.     

Manganese Oxide Nanoparticles/Reduced Graphene Oxide as Novel Electrochemical Platform for Immobilization of FAD and its Application as Highly Sensitive Persulfate Sensor

In this study, manganese oxide nanoparticles/reduced graphene oxide(MnOxNPs/rGO) was used as support for strong immobilization of flavin adenine dinucleotide(FAD). A thin film of rGO cast on the electrode surface, followed by performing electrodeposition of MnOxNPs at applied constant potential of +1.4 V vs. Ag/AgCl for 200 s. Finally, FAD was electrodeposited onto the rGO/MnOxNPs film by potential cycling between 1.0 to ?1.0 V in solution containing 1 mg ml^?1 FAD. Electrochemical properties and catalytic activity of GCE/rGO‐MnOxNPs/FAD toward persulfate (S₂O₈^2?) reduction was investigated. Under optimized condition, the concentration calibration range, detection limit, and sensitivity were 0.1 μM–2 mM, 90 nM and 125.8 nA/μM, respectively, using hydrodynamic amperometry technique.     

末端可裁切碳纳米管薄膜电极的制备及其双酚A电化学检测应用

通过真空抽滤方法得到均匀致密的高导电多壁碳纳米管(MWCNTs)薄膜,利用聚二甲基硅氧烷(PDMS)对其进行封闭处理,制备出末端可裁切的PDMS基柔性碳纳米管薄膜电极,其裁切端面为电化学传感界面。在十六烷基三甲基溴化铵(CTAB)的增敏作用下,所制备的电化学传感器对双酚A(BPA)具有灵敏的电化学响应,其峰电流与BPA浓度在0.05~0.5μmol/L和0.5~12μmol/L范围内呈良好的线性关系,检测限为50nmol/L。通过电极末端的重复裁切可避免电极污染,并实现电极表面的快速更新和重复使用。对同一支电极进行13次连续裁切,用于10μmol/L BPA的检测,其相对标准偏差为3.4%。将该传感器应用于热敏纸样品中BPA的检测,加标回收率在95%~105%之间。