表面活性剂对CdSe量子点荧光性能的影响

通过添加不同类型的表面活性剂在水相中制备了CdSe量子点。用透射电子显微镜(TEM)、X射线衍射(XRD)、X-射线光电子能谱(XPS)对其进行了表征,并用紫外-可见(UV-Vis)和荧光(PL)分光光度法研究了不同类型的表面活性剂对CdSe量子点吸收光谱和荧光光谱的影响。结果表明,加入长链的非离子型和阴离子型表面活性剂制备的CdSe量子点颗粒只有几个纳米,分散性好,量子点的荧光强度也有明显的增强,而加入阳离子表面活性剂制备的量子点颗粒团聚明显,其荧光出现淬灭。     

配体对CdTe量子点与BSA的选择性相互作用的影响

以巯基乙酸(TGA)、巯基丙酸(MPA)、巯基甘油(TG)、L-半胱氨酸(L-cys)和谷胱甘肽(GSH)等5种巯基分子为稳定剂, 水相合成了5种CdTe量子点. 以牛血清白蛋白(BSA)作为靶分子, 通过吸收光谱、荧光光谱和时间分辨荧光动力学等手段研究了各种配体分子稳定的CdTe量子点与BSA的直接相互作用. 结果表明, 5种量子点均能有效猝灭BSA的荧光, 其猝灭程度按配体次序为GSH>L-cys>TGA>TG>MPA; 而BSA对不同配体稳定的CdTe量子点的荧光光谱的影响则具有明显的选择性. BSA对TGA-CdTe和MPA-CdTe量子点的荧光先敏化增强而后猝灭下降; L-cys分子由于同时具有氨基和羧基而与BSA的相互作用较强, 因此BSA能显著猝灭L-cys-CdTe量子点的荧光; 而BSA对TG-CdTe量子点的荧光猝灭程度较小; GSH分子的空间效应使GSH-CdTe量子点的荧光被BSA猝灭的程度最小. 吸收光谱和时间分辨荧光动力学研究表明, 5种量子点与BSA之间的相互作用均为静态过程. 探讨了量子点的配体分子结构与蛋白质的相互作用机理.     

磁性量子点电致化学发光法测定李氏禾提取液中的过氧化氢

利用巯基乙酸水热法合成出表面修饰—COOH的CdTe量子点,并将CdTe量子点(QDs)连接在Fe3O4纳米粒子表面,制备出CdTe/Fe3O4磁性量子点。通过磁力将磁性量子点修饰于石墨电极表面。在pH7.5的PBS缓冲溶液中,H2O2可使CdTe量子点产生电致化学发光,H2O2浓度在4～100μmol/L范围内与CdTe量子点的电致化学发光强度呈良好的线性关系,检出限为0.24μmol/L。据此建立了测定样品中过氧化氢含量的电致化学发光分析法,并成功地应用于李氏禾草汁原液中过氧化氢含量的测定。该研究借助纳米Fe3O4的磁力特征,使敏感膜易于形成和更新分离,简化了实验操作,同时起到增强发光强度的作用。     

CdTe量子点修布电极的阳极电致化学发光

制备了CdTe量子点/Nafion修饰玻碳电极(CdTe QDs/Nafion/GCE),并研究了该修饰电极在中性磷酸盐缓冲溶液(PBS)中的电致化学发光(ECL)行为.结果表明,三丙胺(TPA)作为共反应剂存在时,QDs/Nafion/GCE在中性PBS中可以产生强的阳极电化学发光信号.考察了量子点的用量、Nafion的用量、pH、电解质等条件对ECL的影响.抗坏血酸对QDs/Nafion/GCE的ECL具有抑制作用,且抑制程度与抗坏血酸浓度呈线性关系,为利用电致化学发光法检测抗坏血酸提供了新方法.     

通过S2-中间态将CdSe量子点有机配体转化为ZnS保护层及其器件光伏特性

通过S2-中间态将有机配体三辛基氧膦(TOPO)转化为ZnS保护层,显著改善了CdSe量子点(QDs)器件的转换效率.配体交换后的傅里叶变换红外(FTIR)光谱结果表明,有机配体已被S2-离子配体取代;离子反应后的X射线光电子能谱(XPS)结果表明S2-离子配体反应生成了ZnS,紫外-可见(UV-Vis)吸收光谱结果表明量子点溶液吸收峰位没有发生明显改变,透射电子显微镜(TEM)结果表明配体交换后量子点粒径减小.电化学阻抗谱(EIS)结果表明光照条件下有机配体转化为ZnS保护层后TiO2/QDs/电解质界面电阻减少,证明该条件下正向电子传输增强;强度调制光电压谱(IMVS)和强度调制光电流谱(IMPS)结果表明电子寿命和扩散速度增加.相比于有机配体,形成ZnS保护层后的量子点敏化太阳能电池(QDSC)效率由0.98%提高到1.75%,相对提高了1.78倍.     

基于量子点的电致化学发光免疫传感器研究进展

电致化学发光集成了发光和电化学分析的优点,在生物传感分析方面具有广泛的应用前景.量子点因其独特的性质成为电致化学发光的三大发光体系之一.本文综述了近年来基于量子点的电致化学发光免疫传感器的种类及其信号放大技术,并就相关研究发展方向和趋势作了初步展望.     

硅量子点为共反应剂的联吡啶钌电致化学发光研究及对多巴胺的检测

利用水热法合成了水溶性硅量子点(SiQDs),并探究了联呲啶钌(Ru(bpy)23-)在硅量子点修饰玻碳电极(SiQDs/GCE)上的电致化学发光(ECL)行为.结果表明,在中性条件下,SiQDs能够作为共反应剂明显增强Ru(bpy)32+的阳极ECL信号.研究了SiQDs修饰量、缓冲溶液pH等因素对该体系ECL信号的...     

CdSe量子点修饰电极电化学发光法测定叶酸

制备了水溶性的CdSe量子点,用紫外光谱和荧光光谱对其进行了表征.并将其修饰到金电极的表面,得到了CdSe量子点修饰电极(CdSe/GE),研究了其电化学发光性质.结果表明:在强碱介质中,CdSe/GE对鲁米诺电化学发光具有增敏作用,在此发光体系中加入叶酸后,会产生进一步增强的电化学发光信号,由此建立了电化学发光检测叶酸的新方法.考察了缓冲溶液pH值、鲁米诺的浓度和扫速等条件对电化学发光强度的影响.在优化的实验条件下,叶酸在1×10~(-13)~1.1×10~(-4) mol/L浓度范围内与相对发光强度(ΔI)呈现良好的线性关系,检测限为6.0×10~(-14) mol/L(S/N=3),并用于市售叶酸片剂中叶酸的测定,得到令人满意的实验结果.     

发光碳量子点的合成、性质和应用

基于碳量子点具有良好的水溶性、化学惰性、低毒性、易于功能化和抗光漂白性等优异性能,碳量子点和其它的碳纳米材料（如富勒烯、碳纳米管和石墨烯等）同样引起了研究者广泛的关注。 碳量子点可以通过很多较为廉价的一步法进行大规模的制备,包括化学氧化法、超声法、微波法和激光烧蚀法等。 本文主要介绍了不同碳量子点的合成方法,以及依赖于碳量子点尺寸和波长等性质的发光性能,并且讨论了碳量子点在生物成像、光催化、能量转换/储存、光电子、光限幅和传感器等方面的应用。     

量子点电化学发光研究进展及展望

电化学发光因具有低背景、高灵敏度的优势已成为当前最先进的体外诊断技术之一.以三联吡啶钌为代表的分子型电化学发光体系虽然实现了商业化应用,但其光学性质已无法满足电化学发光分析的发展需求.量子点作为新一代的理想发光材料在电化学发光领域表现出巨大的应用前景.然而,由于对量子点电化学发光的过程和机理研究尚不充分,目前量子点电化学发光的各项性能均有待提升.本文聚焦于量子点电化学发光领域的关键科学问题,在总结该领域重要研究进展的基础上,指出光谱学、合成化学及电分析化学等多领域学科交叉是未来量子点电化学发光研究的重要发展方向.     

Electrochemiluminescence of CdSe Quantum Dots Composited with Nitrogen‐Doped Carbon Nanotubes

A nanocomposite of CdSe quantum dots with nitrogen‐doped carbon nanotubes was prepared for enhancing the electrochemiluminescent (ECL) emission of quantum dots. With hydrogen peroxide as co‐reactant, the nanocomposite modified electrode showed a cathodic ECL emission with a starting potential of ?0.97 V (vs. Ag/AgCl) in phosphate buffer solution, which was five‐times stronger than that from pure CdSe quantum dots and three‐times stronger than that from CdSe quantum dots composited with carbon nanotubes. The latter showed a starting potential of ?1.19 V. This result led to a sensitive ECL sensing of hydrogen peroxide with good stability, acceptable reproducibility and a detection limit down to 2.1×10^?7 mol L^?1. Nitrogen‐doped carbon nanotubes could be used as a good material for the construction of sensitive ECL biosensors for chemical and biochemical analysis.     

Electrochemiluminescence of Dendritic Magnetic Quantum Dots Nanostructure and Its Quenching by Gold Nanoparticles for Cancer Cells Assay

A novel dendritic CdS‐ZnS‐Quantum Dots (QDs) nanocomposite with intense electrochemiluminescence (ECL) and excellent magnetism was prepared, which was applied to the cancer cells assay based on ECL quenching of QDs by gold nanoparticles (NPs). DNA conjugation, gold NPs linking and sensing target cells can be directly performed on the magnetic nanocomposites, which is more rapid, convenient, and has better reproducibility than the conventional methods. So far, this is the first report on magnetic electrochemiluminescent QDs nanocomposites for cell detection based on ECL quenching, which opens a new approach for developing multifunctional QDs nanocomposite for ECL assays of cancer cells.     

InAs量子点光致发光效率的研究

利用分子束外延技术制得InAs量子点样品,采用分光光度法对样品的光致发光效率进行研究.发现在InAs层和GaAs覆盖层之间插入隧道阻挡层,当激发功率密度为60W/cm²时,InAs量子点发射强度的增加量超过一个数量级.这种光复合效率的增强是由于浸润层中的非辐射跃迁受到了抑制所致.     

基于聚合物多齿配体的高性能CdTe量子点的微波水相合成

针对当前水相合成的量子点(QDs)光性能与稳定性等方面存在的不足,发展了基于聚合物多齿配体的水相制备策略.利用巯基修饰的聚丙烯酸(PAA-SH)作为多齿配体代替常用的巯基丙酸等单齿配体,结合微波辅助加热制备了CdTe量子点,研究了多齿配体对量子点的生长机制与荧光性能的影响.以PAA-SH为配体制备的CdTe量子点荧光性能优异(荧光量子效率(PLQY)可达75%),流体力学直径较小(~10 nm),稳定性也有明显提高.基于聚合物多齿配体的量子点制备技术有助于实现生物医学研究中急需的兼具高亮度、高稳定性、小尺寸等特征的高性能量子点生物探针的制备.     

巯基乙酸为稳定剂在MWCNTs上原位生长CdSe量子点

以巯基乙酸作为稳定剂在无毒的溶剂中和较低的温度下实现了CdSe量子点在MWCNTs（多壁碳纳米管）上的原位生长,并用TEM、HRTEM、EDS、XRD、XPS和PL等工具对CdSe量子点-MWCNTs异质结（CdSe-MWCNTs）进行了表征.结果表明, CdSe量子点的晶型为立方晶型,平均粒径大约为4 nm, CdSe-MWCNTs也具有一定的荧光性质.     

CdSe Quantum Dots Based Electrochemiluminescence Immunosensor with Simple Structure for Ultrasensitive Detection of Salbutamol

A rapid and ultrasensitive electrochemiluminescence (ECL) competitive immunoassay based on CdSe quantum dots (QDs) and the shorter chain as possible (cysteamine and glutaraldehyde) has been designed for the detection of salbutamol (SAL). Cysteamine and glutaraldehyde made coating antigen immobilize well on the gold electrode surface through the reaction between functional groups, which brought about the simplicity of the immunosensor to some extent. Transmission electron microscopy image, dynamic light scattering, photoluminescence, ultraviolet‐visible absorption and electrochemical impedance spectra were used to characterize the prepared CdSe QDs and the cysteamine/glutaraldehyde/Ovalbumin‐SAL/anti‐SAL‐QDs immunosensor. In the air‐saturated PBS buffer containing 0.1 M K₂S₂O₈ and 0.1 M KCl (pH 9.0), a strong ECL emission of QDs can be observed which depended linearly on the logarithm of the salbutamol concentration with a wide range from 0.05 ng mL^?1 to 100 ng mL^?1, and a detection limit of 0.0056 ng mL^?1. The sensitivity, repeatability, and specificity of the ECL immunosensor have been evaluated. The sensor has been applied to real samples with satisfactory results. This work will open new ways of detecting food additive residue based on QDs ECL in immunoassays.     

溶剂热合成的Cu掺杂ZnCdS量子点的发光性质研究

以低毒、廉价的环己烷为溶剂,通过调控杂质离子和基质材料阳离子的相对反应活性,合成了发光颜色可调、近似球形的Cu∶Zn Cd S量子点。系统研究了油胺的用量、Cu掺杂量、Cd/Zn比以及不同的Zn前驱体对量子点发光性质的影响。通过在Cu∶Zn Cd S量子点晶核外层包覆宽带隙Zn S材料,进一步消除了粒子的表面缺陷,有效提高了量子点的发光效率。     

Luminescent Sensing with Quantum Dots

Summary This review highlights recent advances in the use of quantum dots (QD’s) as luminescent sensors. The bulk of the study concentrates on systems that possess organic ligands bound to the surface of QD’s. These ligands vary from low molecular weight thiols to larger molecules such as maltose binding protein. All have one thing in common: when a target analyte binds to the ligand/receptor, a perturbation of the system occurs, that registers itself as a change in the luminescence intensity of the QD. Two main mechanisms are prevalent in controlling the luminescent intensity in such systems. The first is Photoinduced Electron Transfer (PET) and the second energy transfer. This review looks at current sensors that operate by using these mechanisms. Two component systems are also investigated where a quencher is first added to a solution of the QD, followed by addition of the target analyte that interacts with the quencher to influence the luminescence intensity.     

Quantitative Model for the Surface-related Electron Transfer in CdS Quantum Dots

The influence of surface S2- dangling bonds and surface doped ions(Se2-, Cu2+, and Hg2+) on the photo-luminescence of Cd2+-rich CdS QDs was investigated. A quantitative model was proposed to understand the complex transfer processes of excited electrons in CdS QDs. The transfer of excited electrons from either the conduction band or the Cd2+-related trap-state to the surface S2+-related shallow hole trap-state is effective. However, the trap of excited electrons by surface doped ion trap-states from the Cd2+-related trap-state is more effective than that from the conduction band. The efficiency of trapping electrons from both the conduction band and the Cd2+-related trap-state can be quantitatively understood with the help of the proposed model. The results show that the transfer efficiency of excited electrons is dependent on the location of the energy-level of the relevant surface-related trap-state. The trap of excited electrons by the surface trap-state with energy-level closer to that of the conduction band is more effective, especially for the trap of excited electrons from Cd2+-related trap-state.