可逆加成-断裂链转移策略制备可识别转铁蛋白的抗原决定基印迹微球

应用可逆加成-断裂链转移（RAFT）策略制备了一种抗原决定基表面印迹微球。这一工作以转铁蛋白的抗原决定基N端九肽作为模板,通过共价键合的方式固载于修饰了戊二醛的硅胶颗粒表面。然后以甲基丙烯酸、甲基丙烯酰羟乙酯为功能单体,甲叉基双丙烯酰胺为交联剂,偶氮二异丁腈（AIBN）为引发剂,N,N-二甲基甲酰胺为溶剂,在三硫酯试剂2-（十二烷基三硫代碳酸酯基）-2-甲基丙酸的调控下,于70 ℃进行活性-可控的聚合反应,制备得到分子印迹微球。该材料对模板抗原决定基的识别容量为2.36 mg/g,印迹因子为1.89;对转铁蛋白的识别容量为4.98 mg/g,印迹因子为1.61,120 min内可达到吸附平衡;在多蛋白质竞争识别中,该材料对转铁蛋白识别的印迹因子远高于细胞色素C、乳球蛋白等其他竞争蛋白质的印迹因子。以上结果证明,通过RAFT策略制备得到的抗原决定基分子印迹材料在对抗原决定基具有良好的识别能力的同时,对模板抗原决定基对应的转铁蛋白也具有优良的选择性、较高的识别容量和较快的识别速度。     

基于抗原决定基的胰岛素分子印迹电化学传感器

采用抗原决定基法制备了胰岛素电化学分子印迹传感器.以胰岛素C端多肽作为模板分子,定向自组装在Au电极上,以邻苯二胺为功能单体,电化学聚合制备分子印迹聚合膜.以NaOH为洗脱液,洗脱模板分子,形成的与胰岛素C端多肽三维结构相匹配的分子印迹孔穴能特异性识别胰岛素.重吸附胰岛素分子后,以K3[Fe(CN)6]/K4[Fe(CN)6]为探针,通过测量探针在电极表面产生的电流大小实现胰岛素的间接测定.在1.0 × 10-14~5.0 × 10-13 mol/L浓度范围内,传感器的电流响应值与胰岛素浓度呈良好的线性关系,检出限为7.24 × 10-15 mol/L(3σ).此传感器具有较好的选择性和稳定性,并成功用于血清样品中胰岛素的测定.     

基于磷光量子点-表面印迹材料细胞色素c人工抗体的制备及其应用

本研究将表面分子印迹聚合物(Surface Molecularly Imprinted Polymers,SMIPs)作为人工抗体,将锰掺杂硫化锌(Mn-ZnS)量子点(Quantum Dots,QDs)的磷光作为识别目标分子的光学信号,制备了一种可识别和定量分析细胞色素c(Cytochromec,Cyt c)的磷光型...     

表面带负电荷氨基酸残基的突变对细胞色素b5与细胞色素c结合和识别的影响

利用核磁共振方法研究表面带不同负电荷氨基酸残基突变后的细胞色素b₅与细胞色素c的结合与识别.结果表明,静电作用在细胞色素b₅与细胞色素c的结合过程中有着重要的贡献,而且这些静电贡献在一定程度上具有累加性,E48的贡献略大于E44.同时还证明Browniandynamicssimulations优化出的Glu48-Lys13,Glu56-Lys₈₇,Asp60-Lys86和heme6-propionate-Tml₇₂(细胞色素b₅的残基排在前面)的结合方式在溶液中的确存在.细胞色素b₅突变体(E48,E56/A,D60/A)及[Cr(oxalate)₃]^3-对细胞色素c的表面结合竞争实验表明,细胞色素c表面结合区Site仍然同细胞色素b₅突变体(E48,E56/A,D60/A)有结合作用,只是结合强度上相对于野生细胞色素b₅同细胞色素c的结合有所降低.这表明除上述的Brownian dynamics simulations模型外,尚有其它如Salemme模型等的结合方式,这也揭示出细胞色素b₅和细胞色素c之间的结合是比较动态的.     

表面印迹制备牛血红蛋白分子印迹聚苯乙烯磁性纳米球

本工作将磁性纳米材料与分子印迹技术结合,以牛血红蛋白为模板分子,3-氨基苯硼酸为功能单体和交联剂,Fe3O4磁性纳米粒子为核,采用表面分子印迹技术,制备具有多层核。壳结构的蛋白质分子印迹聚苯乙烯磁性纳米球．用扫描透射电镜、X射线衍射仪、热重分析仪、磁强振动计研究了制备的蛋白质分子印迹磁性纳米球的表面形貌、粒径大小、多层结构和磁性能．吸附结合实验表明,表面为聚3-氨基苯硼酸分子印迹膜的磁性纳米球对模板蛋白牛血红蛋白具有动力学吸附速度快,特异性吸附选择性高的优点,同时具有在外加磁场下快速分离的特性,可应用于蛋白质分子的选择性分离和富集目标蛋白．     

表面带负电荷氨基酸残基的突变对细胞色素bs与细胞色素c结合和识别的影响

利用核磁共振方法研究表面带不同负电荷氨基酸残基突变后的细胞色素b5与细胞色素c的结合与识别，结果表明，静电作用在细胞色素b5与细胞色素c的结合过程中有着重要的贡献，而且这些静电贡献在一定程度上具有 加性，E48的贡献略大于E44。同时还证明Brownian dyanmics simulations优化出的Glu48-Lys13,Clu56-Lys87,Asp60-Lys86和heme 6-propionate-Tml72（细胞色素b5的残基排在前面）的结合方式在溶液中的确存在，细胞色素b5突变体9E48，E56／A，D60／A）及[Cr(oxalate)3]^3－对细胞色素c的表面竞争实验表明，细胞色素c表面结合区SiteⅢ仍然同细胞色素b5突变体9E48，E56／A，D60／A）有结合作用，只是结合强度上相对于野生细胞色素b5同细胞色素c的结合有所降低，这表明除上述的Browni-an dynamics simulations模型外，尚有其它如Salemme模型等的结合方式，这也揭示出细胞色素b5和细胞色素c之间的结合是比较动态的。     

电化学和紫外-可见吸收光谱法研究pH和金纳米粒子对细胞色素c的影响

制备了粒径均匀、平均粒子尺度为(4.7±0.6)nm,表面修饰3-巯基丙酸(MPA)的金纳米粒子(AuNPs).利用电化学和紫外-可见(UV-Vis)吸收光谱研究了pH和AuNPs对细胞色素c(Cytc)结构的影响.UV-Vis吸收光谱结果表明,pH为7.5-3.0时,Cytc和Cytc-AuNPs复合物的结构没有发生明显变化.当pH=2.0时,Cytc和Cytc-AuNPs复合物的Soret谱峰位置均发生明显移动,说明pH诱导其构象发生变化.循环伏安(CV)结果表明,表面修饰了MPA的AuNPs能促进Cytc和电极之间的电子传输,与修饰了柠檬酸根的AuNPs相比,其生物兼容性更好.pH的变化会引起CV中Cytc峰电流的改变和峰电位的移动.随着pH值的降低,Cytc电活性的量逐渐减小,并且pH诱导Cytc发生不可逆变性.AuNPs的引入使自由态的Cytc耐酸性增强,而使得吸附态的Cytc耐酸能力减弱.     

细胞色素c在纳米氧化铝模板修饰电极上的直接电化学

细胞色素c(Cytochrome c,Cyt c)是生物体中最常见的氧化一还原蛋白质,研究其在电极上的直接电化学,对于理解和认识生命体内的电子转移机制具有重要意义。Cytc与裸固体电极表面的直接接触通常会使其失去生物活性,因此,Cytc的电化学研究常借助于媒介体以实现其与电极之间的电子转移。纳米金属氧化物模板的表面积大且化学和光化学性质稳定,被广泛应用于太阳能电池和金属沉积等领域,本文研究氧化铝(AAO)模板对4,4’-二硫二吡啶存在下Cytc直接电化学促进作用。     

咪唑-细胞色素c复合物的溶液结构研究

轴向配体在决定血红素蛋白结构和性能方面的作用引起人们的兴趣[1]. 细胞色素c是一个重要的电子传递蛋白, 在天然状态下轴向配体His 18和Met 80与血红素的Fe原子配位. UV光谱和NMR谱显示氧化态细胞色素c配位的Met 80在pH大于9或强外源配体存在时较易被取代[2]. 人们对外源配体配位引发细胞色素c的构象的研究得到一些重要的结构特征[3,4]. 但对整个蛋白溶液结构完整精确的描述和血红素电子结构的研究还很少. 此外, 细胞色素c在重折叠过程中形成组氨酸配位的中间体, 而咪唑能捕获和阻断中间体的形成. 为此, 本文对咪唑-细胞色素c复合物溶液结构进行了研究.     

纳米ZnO修饰电极的制备及其对血红蛋白, 细胞色素c的直接电化学研究

A novel electrochemical method as a sensitive and convenient technique for the determination of heme proteins based on their interaction with ZnO nanorods was developed. A ZnO nanorod modified glassy carbon electrode (ZnO/GCE) was prepared and the electrochemical behaviors of heme proteins, such as hemoglobin (HB) and cytochrome c (Cyt-c), on this modified electrode have been studied. The results showed that both HB and Cyt-c could be oxidized on the modified electrode and the oxidation currents were linear to the concentrations of the analytes in aqueous solutions. In addition, the results of flow injection analysis (FIA) further suggested the high stability and reproducibility of the ZnO nanorod modified electrode. So this method can be applied to the determination of HB and Cyt-c in biological systems.     

Preparation of Core‐shell Magnetic Molecularly Imprinted Polymer Nanoparticles for Recognition of Bovine Hemoglobin

Imprinting nanoparticles : Core‐shell bovine hemoglobin (BHb) imprinted magnetic nanoparticles (MNPs) with a mean diameter of 210 nm have been synthesized for the first time. The imprinted magnetic nanoparticles could easily reach the adsorption equilibrium and magnetic separation under an external magnetic field, thus avoiding problems related to the bulk polymer.

     

Nanoparticle‐Imprinted Polymers for Size‐Selective Recognition of Nanoparticles

Citrate‐stabilized gold nanoparticles 15 nm and 33 nm in diameter were transferred concomitantly with a monolayer of positively charged polyaniline by Langmuir–Blodgett transfer at pH 5 onto a conducting indium‐doped tin oxide (ITO) support. Films consisting of one to three layers of polyaniline with thicknesses of 1–3 nm were prepared and characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), and X‐ray photoelectron spectroscopy. After electro‐oxidation of the Au nanoparticles in 0.1 M KCl, cavities were left behind in the film that could be analyzed by SEM. These cavities were able to recapture analyte nanoparticles from a solution of pH 10 and showed size‐exclusion properties. The amount of nanoparticles taken up by the cavities was conveniently analyzed by measuring the charge associated with the electro‐oxidation of these particles in 0.1 M KCl after the film had been rinsed with water. The size‐exclusion properties improved with the number of Langmuir–Blodgett layers transferred.     

表面定向磁性印迹聚合物的制备及对槲皮素的选择性识别

利用硼酸功能化的磁性碳纳米管作为反应基质, 采用一种简便、 绿色的硼酸亲和表面定向印迹法制备了槲皮素磁性分子印迹聚合物, 并将其应用于银杏叶提取物中槲皮素的特异性识别. 透射电子显微镜、 X射线光电子能谱仪、 X射线衍射及振动样品磁强计测试结果表明, 制备的分子印迹聚合物具有良好的形貌和晶型结构. 吸附实验结果表明, 该分子印迹聚合物对模板分子槲皮素具有较好的吸附容量(4.57 μg/mg)、 良好的印迹效果(IF=8.44)和再生能力. 对实际中药样品银杏叶提取物的吸附实验结果表明, 所建立的方法能达到预期的槲皮素检测效果, 可作为中药有效成分槲皮素的特异性识别工具.     

Magnetic Core-Shell Nanoparticles Using Molecularly Imprinted Polymers for Zearalenone Determination

This paper describes the synthesis of novel molecularly imprinted magnetic nano-beads for the selective extraction (MISPE) of zearalenone mycotoxin in river and tap waters and further analysis by high-performance liquid chromatography (HPLC) with fluorescence detection (FLD). A semi-covalent imprinting approach was achieved for the synthesis of the molecularly imprinted polymers (MIP). The nanoparticles were prepared by covering the starting Fe₃O₄ material with a first layer of tetraethyl orthosilicate (TEOS) and then with a second layer using cyclododecyl 2-hydroxy-4-(3-triethoxysilylpropylcarbamoyloxy) benzoate. The last was used with a dual role, template and functional monomer after the extraction of the template molecule. The material was characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD) and Fourier transform infrared spectroscopies (FT-IR). The solid phase extraction was optimized in all the steps: loading, washing and elution. The optimal conditions allowed the determination of zearalenone in trace levels of 12.5, 25 and 50 µg L⁻¹ without significant differences between the fortified and found level concentrations.     

Preparation of Surface-Imprinted Polymer Magnetic Nanoparticles with Miniemulsion Polymerization for Recognition of Salicylic Acid

Molecular surface-imprinted polymers nanoparticles encapsulating magnetite modified with oleic acid, for recognition of salicylic acid was prepared by three-step miniemulsion polymerization. The important factors including polymerization process, solvents, miniemulsifying approaches, and co-stabilizer have been investigated to obtain magnetic molecular imprinting polymers (MMIPs) nanoparticles (NPs) with high saturation magnetization (Ms), regular morphology, and good monodispersion. The results showed that the amount of magnetite encapsulated in MMIPs NPs was 43.4 wt% and Ms was 33.584 emu/g. Thus, MMIPs NPs could be separated easily within 2 minutes by an external magnetic field. The transmission electron microscope (TEM) showed MMIPs NPs were of regular sphere with core-shell structure, where magnetite NPs were uniformly encapsulated in homogeneous polymer shells. The average diameter of MMIPs NPs was 98 nm with RSD of 6.6%. Good recognition and high loading of target molecule were achieved by MMIPs NPs in batch rebinding tests.     

纳米金三明治结构调制细胞色素c电子传递特性的分子机理研究

以细胞色素c(Cyt c)为模型蛋白,采用表面增强红外吸收光谱监测了三明治结构所吸附的纳米金对氧化还原诱导的Cyt c表面增强红外差谱的改变.研究表明,在单层Cyt c分子表面组装纳米金,使得血红素的红外差谱特征峰明显增强,这归因于纳米金和血红素之间的电子传递.纳米金与Cyt c氧化还原活性中心血红素的相互作用加速了蛋白质的电子传递.这为实现并优化表面吸附蛋白质的直接电化学提供了一种新技术.     

表面分子印迹磁性纳米粒子的制备及其血红蛋白传感应用

以Fe₃O₄磁性纳米粒子为载体、多巴胺（DA）为功能单体、血红蛋白（Hb）为模板分子,用氯铂酸氧化DA生成聚多巴胺（PDA）,同时氯铂酸还原为铂纳米粒子（PtNPs）,与Hb一起负载于Fe₃O₄纳米粒子表面,洗脱Hb后合成了表面分子印迹磁性纳米粒子（印迹Fe₃O₄/PDA-PtNPs）. 将印迹Fe₃O₄/PDA-PtNPs修饰于磁性玻碳基底表面,制得印迹Fe₃O₄/PDA-PtNPs修饰电极. 实验结果表明,印迹Fe₃O₄/PDA-PtNPs具有良好的水溶性,粒径分布均匀,生成的PtNPs具有良好的导电性和刚性. 用印迹Fe₃O₄/PDA-PtNPs构建的传感器对Hb具有良好的识别性,在0.14 ~ 2.7 μg·mL^-1 Hb浓度范围与交流阻抗变化值呈良好的线性关系,检出限（S/N=3）为0.05 μg·mL^-1.     

Protein Denaturation Through the Use of Magnetic Molecularly Imprinted Polymer Nanoparticles

The inhibition of the protein function for therapeutic applications remains challenging despite progress these past years. While the targeting application of molecularly imprinted polymer are in their infancy, no use was ever made of their magnetic hyperthermia properties to damage proteins when they are coupled to magnetic nanoparticles. Therefore, we have developed a facile and effective method to synthesize magnetic molecularly imprinted polymer nanoparticles using the green fluorescent protein (GFP) as the template, a bulk imprinting of proteins combined with a grafting approach onto maghemite nanoparticles. The hybrid material exhibits very high adsorption capacities and very strong affinity constants towards GFP. We show that the heat generated locally upon alternative magnetic field is responsible of the decrease of fluorescence intensity.