Use of a database of plots of pesticide retention (R F) against mobile-phase composition.Part II. TLC as a pilot technique for transferring retention data to HPLC, and use of the data for preliminary fractionation of a mixture of pesticides by micropreparative column chromatography

Summary Relationships betweenR _F values and mobile-phase composition have been determined for moderately polar pesticides in normal-phase systems (NP) of the type silica-non-polar diluent (heptane)-polar modifier (ethyl acetate, tetrahydrofuran, or dioxane) and in reversed-phase systems (RP) of the type octadecyl silica-water-polar modifier (acetonitrile, methanol, or tetrahydrofuran). These relationships constitute a retention database which has enabled choice of the optimum conditions for preparative column chromatographic separation of pesticides into fractions; these were then applied to a silica plate and chromatographed. The plate was videoscanned, furnishing a real picture of the plate showing complete separation of the pesticide fractions.     

Thin-layer chromatography of coordination compounds. Factors affecting the retention of complexes on silica gel

Thin-layer chromatography of a group of transition-metal acetylacetonates on silica gel has established a structure—R_F correlation for the complexes. Several mechanisms of adsorption of complexes on silica gel are considered and the results are correlated with these mechanisms.     

Modeling of chromatographic retention of the selected antiarrhythmics and structurally related compounds in the hydrophilic interactions under the TLC and HPLC conditions

Abstract

High-performance liquid chromatography (HPLC) plays an important role in testing the pharmaceutically active compounds. In despite of the advantages of HPLC, thin-layer chromatography (TLC) retains its applicability to the different experimental tasks. The experimental conditions which allow hydrophilic interactions in the chromatographic system were tested in the HPLC and TLC systems for ivabradine, its related compounds, diltiazem and verapamil. Under the TLC conditions, retention behavior of the investigated compounds was tested on silica gel modified with cyanopropyl ligands as stationary phase and acetonitrile?+?methanol containing 25% v/v formic acid. Under the HPLC conditions, we used silica gel modified with cyanopropyl ligands as a column packing and the acetonitrile + 0.25% aqueous solution of formic acid as mobile phase. Retention behavior of the investigated analytes depending on the changing volume fractions of the mobile phase modifier was characterized both for TLC and HPLC data sets by the Soczewiński–Wachtmeister equation. Linear relationships were established between the retention coefficients characterizing the retention mechanism (R_M⁰/m, logk₀/m) and molecular properties of the investigated compounds. The Quantitative Structure Retention Relationship (QSRR) modeling was performed with the use of the stepwise multiple linear regression, in order to select molecular properties which influence retention.     

Optimization of chromatographic systems for the high-performance thin-layer chromatography of flavonoids

Summary To characterize the retention and selectivity of separations of 23 flavonoids (aglycones and glycosides) relationships betweenR _F and modifier concentration were determined for silica and diol adsorbents (with mixtures of ethyl acetate and methanol as mobile phases), for cyanopropyl silica (with mixtures of ethyl acetate and dichloromethane as mobile phases), for aminopropyl silica (with mixtures of ethyl acetate, methanol and water as mobile phases) and for octadecyl silica (with mixtures of methanol and water as mobile phases). Owing to large polarity differences between aglycones and glycosides, these groups of compounds cannot be separated other than by use of reversed-phase systems, for which the selectivity is lower. It follows from correlation plots ofR _F1 againstR _F2 that for some pairs of adsorbents (e. g. silica and diol) selectivity differences are small; for others the points in the plot are widely dispersed, indicating selectivity differences. The chemometric database obtained can be used to choose optimum chromatographic systems for the separation of given sets of flavonoids and for planning gradient elution programs for separation of flavonoid aglycones and glycosides in a single TLC experiment.     

The lipophilicity of parabens estimated on reverse phases chemically bonded and oil‐impregnated plates and calculated using different computation methods

The chromatographic behaviour of the parabens has been investigated on RP‐18F_254S, RP‐18WF_254S, CNF_254S, Diol F_254s and silica gel 60F₂₅₄ plates impregnated with different oils (paraffin, olive, sunflower and corn) using methanol–water mixtures in different volume proportions as mobile phases, the regression determination coefficients being excellent (higher than 0.98 for the majority of compounds). Moreover, highly significant correlations were obtained between different experimental indices of lipophilicity (R_M0, b and scores corresponding to the first principal component (PC1)) and computed log P values. All types of stationary phases investigated appear to be highly suited for estimating the lipophilicity of the parabens.     

A Comparative Study of the Lipophilicity of Metformin and Phenformin

The results presented in this paper confirm the beneficial role of an easy-to-use and low-cost thin-layer chromatography (TLC) technique for describing the retention behavior and the experimental lipophilicity parameter of two biguanide derivatives, metformin and phenformin, in both normal-phase (NP) and reversed-phase (RP) TLC systems. The retention parameters (R_F, R_M) obtained under different chromatographic conditions, i.e., various stationary and mobile phases in the NP-TLC and RP-TLC systems, were used to determine the lipophilicity parameter (R_MW) of metformin and phenformin. This study confirms the poor lipophilicity of both metformin and phenformin. It can be stated that the optimization of chromatographic conditions, i.e., the kind of stationary phase and the composition of mobile phase, was needed to obtain the reliable value of the chromatographic lipophilicity parameter (R_MW) in this study. The fewer differences in the R_MW values of both biguanide derivatives were ensured by the RP-TLC system composed of RP2, RP18, and RP18W plates and the mixture composed of methanol, propan-1-ol, and acetonitrile as an organic modifier compared to the NP-TLC analysis. The new calculation procedures for logP of drugs based on topological indices ⁰χ^ν, ⁰χ, ¹χ^ν, M, and M^ν may be a certain alternative to other algorithms as well as the TLC procedure performed under optimized chromatographic conditions. The knowledge of different lipophilicity parameters of the studied biguanides can be useful in the future design of novel and more therapeutically effective metformin and phenformin formulations for antidiabetic and possible anticancer treatment. Moreover, the topological indices presented in this work may be further used in the QSAR study of the examined biguanides.     

Estimating the lipophilicity of a number of 2‐amino‐1‐cyclohexanol derivatives exhibiting anticonvulsant activity

The lipophilicity of a number of N‐acyl derivatives of trans‐ or cis‐: racemic, (1R,2R)‐ or (1S,2S)‐aminocyclohexanol (1–13) exhibiting anticonvulsant activity was investigated. Their lipophilicity (R_{m 0}) was determined using reversed‐phase thin‐layer chromatography (RP‐TLC) with mixtures of methanol and water as mobile phases. The partition coefficients of compounds 1–13 (log P) were also calculated using two computer programs (Pallas and Chem DU) and compared with R_{m 0}. Copyright © 2009 John Wiley & Sons, Ltd.     

Naphthyl Groups in Chiral Recognition: Structures of Salts and Esters of 2‐Methoxy‐2‐naphthylpropanoic Acids

The crystal structures of salt 8 , which was prepared from (R)‐2‐methoxy‐2‐(2‐naphthyl)propanoic acid ((R)‐MβNP acid, (R)‐ 2 ) and (R)‐1‐phenylethylamine ((R)‐PEA, (R)‐ 6 ), and salt 9 , which was prepared from (R)‐2‐methoxy‐2‐(1‐naphthyl)propanoic acid ((R)‐MαNP acid, (R)‐ 1 ) and (R)‐1‐(p‐tolyl)ethylamine ((R)‐TEA, (R)‐ 7 ), were determined by X‐ray crystallography. The MβNP and MαNP anions formed ion‐pairs with the PEA and TEA cations, respectively, through a methoxy‐group‐assisted salt bridge and aromatic CH???π interactions. The networks of salt bridges formed 2₁ columns in both salts. Finally, (S)‐(2E,6E)‐(1‐²H₁)farnesol ((S)‐ 13 ) was prepared from the reaction of (2E,6E)‐farnesal ( 11 ) with deuterated (R)‐BINAL‐H (i.e., (R)‐BINAL‐D). The enantiomeric excess of compound (S)‐ 13 was determined by NMR analysis of (S)‐MαNP ester 14 . The solution‐state structures of MαNP esters that were prepared from primary alcohols were also elucidated.     

Preparation of a variety of fluoroalkyl end‐capped N‐(1,1‐dimethyl‐3‐oxobutyl)acrylamide oligomer/silica nanocomposites possessing no weight loss characteristic at 800°C

A variety of fluoroalkyl end‐capped N‐(1,1‐dimethyl‐3‐oxobutyl)acrylamide oligomer [R_F‐(DOBAA)_n‐ R_F]/silica nanocomposites, in which the oligomer contents are 18–96%, were prepared by reactions of the corresponding fluorinated oligomer with tetraethoxysilane and silica nanoparticles under alkaline conditions. Each fluorinated oligomer/silica composite thus obtained is nanometer size‐controlled very fine particles (22–68 nm) possessing a good dispersibility and stability in a variety of solvents including water. Interestingly, the weight loss of R_F‐(DOBAA)_n‐R_F/silica nanocomposites, in which the oligomer contents are 18–72%, were not observed at all even at 800°C, as well as the original silica nanoparticles, although the corresponding sub‐micrometer size‐controlled R_F‐ (DOBAA)_n‐R_F/silica composites (particle size: 359 nm) decomposed completely at 800°C to afford the weight loss in proportion to the content of R_F‐(DOBAA)_n‐R_F oligomer in composites. On the other hand, a slight weight loss of R_F‐(DOBAA)_n‐R_F/silica nanocomposites, in which the oligomer contents are 75–94%, was observed at 800°C compared to that of the original silica nanoparticles. Copyright © 2008 John Wiley & Sons, Ltd.     

Prediction of the retention in thin layer chromatography screening systems by atomic contributions

A novel atomic-contribution system for predicting of R_M values is presented and validated on 13 thin layer chromatography screening systems on silica gel, where the large experimental datasets (198-761 R_M values) are available. The R_M is predicted with error less than 0.5 in majority of solutes (besides several outliers), which corresponds to difference in R_F equal to 0.28 in the worst case. The system was validated by dividing the data into training and validation datasets, proving its accuracy. The main reason of larger errors in outliers are: large conjugated heterocycles, quarternary ammonium cations, large amount of polar atoms or very simple but unique molecules. The calculations are very easy and can be performed on free software or even manually. The presented method can be used in the retention prediction of new solutes in existing chromatographic screening systems.     

Survey and Trends in the Preparation of Chemically Bonded Silica Phases for Liquid Chromatographic Analysis

In order to increase chromatographic selectivity and to extend the analytical capability of reversed phase liquid chromatography (RP HPLC) many investigators have concentrated on the preparation of silica based column packings with chemically bonded phases (CBP). These phases have also been successfully used in sample preparation techniques, mainly in solid phase extraction (SPE). Although alkyl bonded phases (e.g., C₂, C₈, and C₁₈) are the most widely used packings in RP HPLC and SPE, various specific applications require CBPs with polar functional groups (e.g., -NH₂, -NO₂, -CN, and/or -OH). The solution of problems with separation of complicated chiral compounds was attempted by applying stationary phases with chiral selectors (e.g., cyclodextrins, Pirkle phases, crown ethers, etc.). On the other hand, packings with pseudo-membrane or liquid crystal properties have been utilized for the separation of various substances of natural origin. Porous silica is commonly used as a support in the preparation of CBPs. Its physico-chemical characteristics, such as: type and structure of siliceous matrix, porosity, type and concentration of silanol groups, as well as surface purity, strongly influence the density and structure of chemically bonded phases. Recognition of these properties is helpful in optimizing separation processes based on RP HPLC elution and/or extraction of substances with polar character.     

Use of Database of Plots of Pesticide Retention (R F ) Against Mobile-Phase Compositions for Fractionation of a Mixture of Pesticides by Micropreparative Thin-Layer Chromatography

Relationships between R _F values and mobile-phase composition have been determined for urea herbicides and fungicides in normal-phase systems (NP) of the type silica-nonpolar or weakly polar diluent (heptane, toluene, diisopropyl ether) – polar modifier (ethyl acetate, tetrahydrofuran, dioxane, ethyl-methyl ketone and 2-propanol). These relationships constitute a retention database which has enabled to choose optimum systems for preliminary fractionation of a multicomponent mixture of pesticides by zonal micropreparative TLC. The mixture was applied from the edge of the layer in the frontal + elution mode which increased the separation efficiency because or displacement effects. The separated simpler fractions were applied to a silica plate and rechromatographed. The plate was videoscanned, furnishing a real picture of the plate showing preliminary separation of the simpler pesticide fractions. Complete separation of the fractions was carried out by two-dimensional thin-layer chromatography on plates with chemically bonded-cyanopropyl silica stationary phase using non-aqueous eluent in the first direction and aqueous reversed-phase eluent in the second direction.     

Thin-layer chromatography (TLC) as pilot technique for HPLC. Utilization of retention database (R F) vs. eluent composition of pesticides

Summary TLC and HPLC are frequently unjustly regarded as competitive methods. Using the advantages of both methods, a combination of TLC and HPLC leads to a considerable saving of time and expense in analysis. Experimental data are presented aslog k (HPLC) vs.R _M (TLC) correlations; high correlation coefficients indicate that TLC using octadecyl silica, wettable with water (RP-18W) can be applied as a pilot technique for HPLC (RP-18).     

Preparation and thermal stability of fluoroalkyl end‐capped vinyltrimethoxysilane oligomeric silica/boric acid nanocomposites‐encapsulated a variety of low molecular weight organic compounds

Fluoroalkyl end‐capped vinyltrimethoxysilane oligomer [R_F‐(VM)_n‐R_F] reacted with boric acid to afford the corresponding fluorinated oligomeric silica/boric acid nanocomposite [R_F‐(VM? SiO₂)_n‐R_F/B(OH)₃] fine particles with mean diameter: 36–105 nm. The obtained R_F‐(VM? SiO₂)_n‐R_F/B(OH)₃ nanocomposites were applied to the encapsulation of low molecular weight organic compounds such as diphenylsilanediol, 1,1′‐bi‐2‐naphthol, 4,4′‐biphenol, bisphenol A, bisphenol F, bisphenol AF, biphenyl, dibenzyl, and pentaerythritol into these nanocomposite cores to provide the corresponding fluorinated oligomeric silica/boric acid nanocomposites—encapsulated these organic molecules. Interestingly, the obtained nanocomposites were found to exhibit no weight loss behavior corresponding to the contents of these guest molecules even after calcination at 800 °C, although these nanocomposites were isolated through no purification process. The R_F‐(VM? SiO₂)_n‐R_F nanocomposites—encapsulated these organic guest molecules were prepared under similar conditions. However, it was demonstrated that these nanocomposites can provide the clear weight loss corresponding to the contents of these guest molecules in the nanocomposites after calcination at 800 °C. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3835–3845     

Correlation between hydrophobicity of amino acids and retention data in reversed-phase liquid chromatography with micellar eluents

Summary Hydrophobic character is usually expressed in terms of the partition coefficient in 1-octanol-water (log P_o/w). However, measurement of this coefficient is often problematic. Retention in micellar liquid chromatography is mainly due to hydrophobic interactions and can also be used as an index of hydrophobicity. A hydrophobicity scale was established with retention data foro-phthalaldehyde (OPA)-N-acetyl-L-cysteine (NAC) amino acid derivatives, using the glycine derivative as reference. Since the OPA-NAC derivatives only differ in the nature of R₁ in the amino acid (R₁CH (COOH)NH₂), in the absence of electrostatic interactions the hydrophobic character of the substituent was responsible for retention. Linear relationships were obtained between log of the ratiok′ of amino acid derivatives:k′ of the glycine derivative for a given mobile phase, and logP _o/w for the R₁ substituent. Good correlations were also found for phenylthiohydantoin amino acid derivatives.     

Separation and identification of some common isomeric plant triterpenoids by thin-layer chromatography and high-performance liquid chromatography

Chromatographic separation of 10 triterpenoids (α-amyrin, β-amyrin, δ-amyrin, lupeol, lupenon, lupeol acetate, cycloartenol, cycloartenol acetate, ursolic acid, oleanolic acid) and 2 sterols (stigmasterol and β-sitosterol) was studied. The chromatographic techniques included silica gel and reversed-phase (C₁₈ RP) thin-layer chromatography (TLC) and C₁₈ RP high-performance liquid chromatography (HPLC) using UV and mass spectrometric (MS) detection with atmospheric pressure chemical ionization (APCI). The TLC separation of the isomeric triterpenols lupeol, α-amyrin, β-amyrin and cycloartenol was achieved for the first time using C₁₈ RP-HPTLC plates. Cycloartenol could be separated from related compounds only on C₁₈ RP-TLC but not on the C₁₈ RP-HPLC. δ-Amyrin isolated from the tomato fruit surface extract could be separated from other amyrins only by HPLC. Tandem mass spectrometry allowed discrimination between the isomers lupeol, α-amyrin, β-amyrin, δ-amyrin, cycloartenol and between lupeol acetate and cycloartenol acetate. The combination of 3 TLC methods and 2 HPLC methods enables qualitative determination of all 12 compounds and proves to be useful for the analysis of plant extracts. It is recommended that TLC screening on silica gel and C₁₈ RP be performed before HPLC analysis.     

The acetonitrile shortage: Is reversed HILIC with water an alternative for the analysis of highly polar ionizable solutes?

In hydrophilic interaction chromatography (HILIC), best results are obtained with high concentrations of ACN. In the framework of green chromatography and the present shortage and very high price of this hazardous solvent, reversing the stationary phase to apolar and the mobile phase to aqueous can be of interest for several applications. The features of the aqueous RP technique called per aqueous LC (PALC) are illustrated with the analysis of catecholamines, nucleobases, acids, and amino acids. The ca. three-fold higher viscosity of water compared to ACN has consequences on the shape of the Van Deemter plot. For dopamine (N = 26.450 on a 25 cm×4.6 mm id, 5 μm bare silica column), a reduced plate height of 1.9 at an u_opt of 0.3 mm/s was calculated. The plate number, however, strongly depends on pH and ionic strength. As in RP separations, retention is shortened by adding an organic modifier. In the framework of green chromatography, the biodegradable ethanol was used. On the other hand, retention increased by lengthening the carbon chain of ion-pair reagents supporting the RP mechanism as well.     

Comparative chromatographic adsorbabilities of some azines,thioles and thienopyridines,their heteroatom oxides and other derivatives on silica gel

Thin layer chromatographic R_f data on silica gel are reported for 64 compounds containing either a thiole sulfur atom, one or more azine nitrogen atoms, or both. Thiole adsorbates are compared with 28 aromatic hydrocarbons and non-heterocyclic sulfur compounds. In general the orders of R_f values found are thioles > sulfides > sulfones > sulfoxides > azine N-oxides and azines > azine-N-oxides. Results are interpreted in terms of hydrogen bonding from the silica gel to the adsorbate. The different orders of adsorbability found amongst four series of condensed thiophenes and their arene analogs for chromatography on silica gel and on alumina are rationalized in terms of planarity and acid-base interactions. Correlations of the tlc data with separations on columns are presented.