Analytic investigation of friction and heat transfer in the neighborhood of a three-dimensional stagnation point at low and moderate Reynolds numbers

A study is made of hypersonic three-dimensional flow of a viscous gas past blunt bodies at low and moderate Reynolds numbers with allowance for the effects of slip and a jump of the temperature across the surface. The equations of the three-dimensional viscous shock layer are solved by an integral method of successive approximation and a finite-difference method in the neighborhood of the stagnation point. In the first approximation of the method an analytic solution to the problem is found. Analysis of the obtained solution leads to the proposal of a simple formula by means of which the calculation of the heat flux to a three-dimensional stagnation point is reduced to the calculation of the heat flux to an axisymmetric stagnation point. A formula for the relative heat flux obtained by generalizing Cheng's well-known formula [1] is given. The accuracy and range of applicability of the obtained expressions are estimated by comparing the analytic and numerical solutions. Three-dimensional problems of the theory of a supersonic viscous shock layer at small Reynolds numbers were considered earlier in [2–5] in a similar formulation but without allowance for the effects of slip.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 143–150, March–April, 1988.     

Comparison of approximate analytical and numerical solutions for heat fluxes in viscous supersonic flow past a body

The axisymmetric supersonic laminar flow of a viscous perfect gas past a blunt body is studied over a wide range of Reynolds and Mach numbers. An approximate analytical solution for the distribution of the heat flux, divided by its value at the stagnation point, over the body surface is derived. The expression for the relative heat flux depends only on the body geometry and the pressure distribution over the body surface. To evaluate the accuracy and the range of validity of the formulas obtained, a comparison with numerical solutions of the complete Navier-Stokes equations was carried out for bodies of various shapes, such as spheres, ellipsoids, and paraboloids.Moscow. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 1, pp. 125–132, January–February, 1996.     

Numerical simulation of laminar viscous supersonic flow past a two-dimensional cavity

A systematic study of laminar viscous supersonic flows past rectangular cavities in a flat plate was carried out on the basis of the numerical integration of the Navier-Stokes equations. The greater part of calculations was performed at a Mach number of the outer flow equal to 3 and at a surface temperature amounting to 20% of the stagnation temperature. The pressure, surface friction and heat flux profiles on the plate and on the cavity walls and bottom, together with the streamline pattern, were obtained for various Reynolds numbers.Moscow. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 6, pp. 27–33, November–December, 1994.     

Nonmonotonic dependence of the convective heat flux on the rate of blowing of opaque admixtures into a radiating H-He shock layer

The results are given of calculations of radiative and convective heat transfer in a radiating H-He shock layer in the neighborhood of the stagnation point of a blunt body when graphite ablation products are blown from the surface. It is found that under the conditions in the shock layer characteristic for motion of the body in the atmosphere of Jupiter [3] the dependence of the convective flux on the blowing rate is essentially nonmonotonic. The maximal value is comparable with the radiative flux to the surface under these conditions. It is shown that a decisive part in the mechanism which increases the convective flux is played by the presence near the surface of particles which effectively absorb radiative energy in the spectral regions in which an appreciable radiation flux reaches the boundary layer; the difference between the transport properties of the blown and the oncoming gases is also important.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 106–113, May–June, 1981.     

Blowing of a foreign gas in a hypersonic viscous shock layer

We consider the problem of a hypersonic viscous flow of a nonreactive mixture of ideal gases around smooth thick bodies in the framework of a two-layer model of a thin shock layer for moderately small Reynolds numbers. We investigate the effect of blowing of a foreign gas through a permeable surface in the bow region of a spherical blunt body. We introduce a transformation of variables that gives a number of important advantages in the numerical solution of the problem under consideration. The problem of mass blowing from the surface of a body into a boundary layer has an extensive literature. The effect of blowing for moderately small Reynolds numbers has been considerably less studied [1–5], and in the majority of papers on this question either the critical point of a blunt body or the blowing of a gas homogeneous with the gas in the incoming flow is investigated.Moscow. Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 110–116, July–August, 1972.     

Investigation of hypersonic flow of rarefied gas past wings of infinite span

In the framework of the locally self-similar approximation of the Navier-Stokes equations an investigation is made of the flow of homogeneous gas in a hypersonic viscous shock layer, including the transition region through the shock wave, on wings of infinite span with rounded leading edge. The neighborhood of the stagnation line is considered. The boundary conditions, which take into account blowing or suction of gas, are specified on the surface of the body and in the undisturbed flow. A method of numerical solution of the problem proposed by Gershbein and Kolesnikov [1] and generalized to the case of flow past wings at different angles of slip is used. A solution to the problem is found in a wide range of variation of the Reynolds numbers, the blowing (suction) parameter, and the angle of slip. Flow past wings with rounded leading edge at different angles of slip has been investigated earlier only in the framework of the boundary layer equations (see, for example, [2], which gives a brief review of early studies) or a hypersonic viscous shock layer [3].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 150–154, May–June, 1984.     

One-dimensional and two-dimensional analogs for three-dimensional viscous flows in the neighborhood of the plane of symmetry of a blunt body

An approximate method of determining the heat transfer and friction stress in three-dimensional flow problems using the two-dimensional and one-dimensional solutions is proposed. This method is applicable over a wide range of Reynolds numbers — from low to high. On the basis of a theoretical analysis of the approximate analytic solution of the equations of a three-dimensional viscous shock layer it is shown that the problem of determining the heat flux in the neighborhood of the plane of symmetry of bodies inclined to the flow at an angle of attack can be reduced, firstly, to the problem of determining that quantity for an axisymmetric body and, secondly, to the problem of determining the heat transfer to an axisymmetric stagnation point. On the basis of an analysis of the results of a numerical solution of the problem it is shown that corresponding analogs can also be used for the friction stress. The accuracy of the similarity relations established is estimated by solving the problem by a finite-difference method. A similarity relation of the same kind was previously obtained in [1] for a double-curvature stagnation point.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 117–122, January–February, 1990.     

Investigation of the hypersonic viscous shock layer around blunt bodies in a nonuniform flow

Unseparated viscous gas flow past a body is numerically investigated within the framework of the theory of a thin viscous shock layer [13–15]. The equations of the hypersonic viscous shock layer with generalized Rankine-Hugoniot conditions at the shock wave are solved by a finite-difference method [16] over a broad interval of Reynolds numbers and values of the temperature factor and nonuniformity parameters. Calculation results characterizing the effect of free-stream nonuniformity on the velocity and temperature profiles across the shock layer, the friction and heat transfer coefficients and the shock wave standoff distance are presented. The unseparated flow conditions are investigated and the critical values of the nonuniformity parameter a_k [10] at which reverse-circulatory zones develop on the front of the body are obtained as a function of the Reynolds number. The calculations are compared with the asymptotic solutions [10, 12].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 154–159, May–June, 1987.     

Investigation of the influence of blowing on the flow in a hypersonic viscous shock layer near the stagnation streamline on a blunt body

In the framework of the approximation of local similarity to the Navier-Stokes equations, an investigation is made of the axisymmetric flow of homogeneous gas in a hypersonic shock layer, this including the region of transition through the shock wave. Boundary conditions, which take into account blowing of gas, are specified on the surface of the body and in the undisturbed flow. A numerical solution to the problem is obtained in a wide range of variation of the Reynolds number and the blowing parameter. Expressions are found for the dependences on the blowing parameter usually employed in boundary layer theory of the coefficients of friction and heat transfer on the surface of the body, which are divided by their values obtained for blowing parameter equal to zero. It is shown that these dependences are universal and the same as the dependences obtained from the solution of the equations of a hypersonic viscous shock layer with modified Rankin-Hugoniot relations across the shock wave and from the solution of the boundary layer equations.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 199–202, January–February, 1980.     

Viscous shock layer on the surface of a blunt body in a diverging supersonic flow

The results are given of calculations of supersonic diverging flow past the spherical front of a body obtained using the Navier-Stokes equations. Flows at moderate Reynolds numbers are considered. A study is made of the influence of the nonuniformity of the oncoming flow on the flow field in the shock layer and on the distribution of the pressure, the friction coefficient, and the heat flux over the surface of the sphere.     

Asymptotic Investigation of the Thin Viscous Shock Layer Equations in the Neighborhood of the Stagnation Point for Low Reynolds Numbers

Hypersonic three-dimensional viscous rarefied gas flow past blunt bodies is investigated in the neighborhood of the stagnation point. The problem of applicability of the model of a thin viscous shock layer to the regime of transition from continuum to free-molecular flow is considered. In [1], it was shown that at low Reynolds numbers three hypersonic flow regimes can be distinguished and one of those regimes was investigated. In the present study an asymptotic solution of the thin viscous shock layer equations is obtained for another flow regime. With decrease in the Reynolds number the heat transfer coefficient determined by the solution obtained approaches its free-molecular value and the friction coefficient approaches its free-molecular limit, provided that the shock layer thickness is small. The analytical solution is compared with a numerical solution and the results of calculations based on direct Monte Carlo simulation.     

Axisymmetric analogy for three-dimensional viscous flow problems

A method of solving three-dimensional flow problems with the aid of two-dimensional solutions, which can be used for any Reynolds numbers, is proposed. The method is based on the use of similarity relations obtained in the theoretical analysis of the approximate analytic solution of the equations of a three-dimensional viscous shock layer. These relations express the heat flux and the friction stress on the lateral surface of a three-dimensional body in terms of the values on the surface of an axisymmetric body. The accuracy is estimated by comparing the results with those of a numerical finite-difference calculation of the flow past bodies of various shapes. Similar similarity relations were previously obtained in [1] for the plane of symmetry of a blunt body.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 111–118, November–December, 1991.The authors are grateful to G. A. Tirskii for his interest in their work.     

Supersonic nonuniform viscous gas flow past a blunt body with supply of gas from the surface

The problem of axisymmetric nonuniform gas flow past smooth blunt bodies at high Mach numbers is investigated. The approach stream is a parallel axisymmetric flow in which the velocity and temperature depend on the radial distance from the axis of symmetry and the pressure is constant. On the axis of symmetry the velocity has a minimum and the temperature a maximum. A characteristic feature of this flow is the existence of two qualitatively different flow regimes: separated [1-4], when in the shock layer on the front of the body there is a closed region of reverse-circulating flow, and unseparated [5, 6], when there is no such zone. In this study the case of unseparated flow is investigated. The equations of a thin viscous shock layer with generalized Rankine-Hugoniot conditions at the shock and boundary conditions on the body that take into account the supply of gas from the surface are solved numerically. The effect of the gas supply on the conditions of unseparated flow is analyzed in relation to the Reynolds number, and the critical values of the nonuniformity parameter a = a_k [5] are obtained. It is shown that at high Reynolds numbers the supply of gas from the surface has practically no effect on a_k, while at low and intermediate Reynolds numbers it reduces the region of unseparated flow. For high Reynolds numbers and an intense supply of gas from the surface an asymptotic solution of the problem is obtained for the neighborhood of the stagnation point. This is compared with the numerical solution.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 122–129, July–August, 1988.The authors wish to thank G. A. Tirskii for useful discussions of the results.     

Unsteady three-dimensional viscous shock layer in nonuniform gas flow in the neighborhood of a stagnation point

The combined influence of unsteady effects and free-stream nonuniformity on the variation of the flow structure near the stagnation line and the mechanical and thermal surface loads is investigated within the framework of the thin viscous shock layer model with reference to the example of the motion of blunt bodies at constant velocity through a plane temperature inhomogeneity. The dependence of the friction and heat transfer coefficients on the Reynolds number, the shape of the body and the parameters of the temperature inhomogeneity is analyzed. A number of properties of the flow are established on the basis of numerical solutions obtained over a broad range of variation of the governing parameters. By comparing the solutions obtained in the exact formulation with the calculations made in the quasisteady approximation the region of applicability of the latter is determined. In a number of cases of the motion of a body at supersonic speed in nonuniform media it is necessary to take into account the effect of the nonstationarity of the problem on the flow parameters. In particular, as the results of experiments [1] show, at Strouhal numbers of the order of unity the unsteady effects are important in the problem of the motion of a body through a temperature inhomogeneity. In a number of studies the nonstationary effect associated with supersonic motion in nonuniform media has already been investigated theoretically. In [2] the Euler equations were used, while in [3–5] the equations of a viscous shock layer were used; moreover, whereas in [3–4] the solution was limited to the neighborhood of the stagnation line, in [5] it was obtained for the entire forward surface of a sphere. The effect of free-stream nonuniformity on the structure of the viscous shock layer in steady flow past axisymmetric bodies was studied in [6, 7] and for certain particular cases of three-dimensional flow in [8–11].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 175–180, May–June, 1990.     

Two-phase mass injection from the stagnation zone of a blunt body in a hypersonic flow

A mathematical model of the hypersonic steady gas flow over the stagnation zone of an axisymmetric blunt body with given two-phase injection from the surface is proposed. The two-continuum model of a dusty gas [3] is used for describing the flow in the region of the wall. The problem is solved in the boundary layer and thin viscous shock layer approximations. On the basis of the numerical calculations the distribution of the parameters of the carrier and dispersed phases near the axis of symmetry is obtained. The similarity parameters determining the convective heat transfer are found. The stagnation point heat fluxes with and without particles are compared. The range of parameters on which particles can significantly reduce the heat transfer is determined.Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No.4, pp. 60–66, July–August, 1992.     

Heat transfer in the neighborhood of the critical point or line in the presence of hydrogen blowing and combustion

The results of numerical calculations of the thin viscous shock layer equations are presented. The dependence of the heat exchange on the generalized blowing parameter, which depends on the blown gas flow rate and the Reynolds number, is obtained.Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 3, pp. 144–149, May–June, 1995.     

Hypersonic viscous shock layer in a swirling gas flow on a permeable surface

A hypersonic swirling flow of viscous compressible gas past rotating axisymmetric blunt bodies is considered, its velocity vector being parallel to the axis of rotation of the body. The body surface is assumed permeable, while, in the general case, the gas is not injected (drawn off) along the normal to the body surface. An analytic solution of the problem, valid at small Reynolds numbers, is found in the first approximation of the integral method of successive approximations. On the basis of the results of the numerical solution, obtained in a wide range of variation of the determining parameters of the problem, we investigate the influence of the swirling of the free-stream flow, the angular velocity of rotation of the body, the Reynolds number and the injection (suction) parameter on the structure of the compressed layer, and the coefficients of friction and heat transfer on the body surface. The influence of the swirling of the flow on the nature of the asymptotic behavior of the viscous shock layer equations at large Reynolds numbers is studied. It is shown that the presence of a nonzero peripheral component for the velocity vector of the gas in the shock layer can lead to a qualitative change in the nature of the flow. Deceased Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 27–37, November–December, 1986. The authors thank G. G. Chernyi for his useful discussion of the results of the work.     

Three-dimensional thin viscous shock layer in the absence of planes of symmetry in the flow

The basic laws of viscous homogeneous gas flow at high supersonic speeds past smooth blunt bodies with a permeable surface are investigated within the framework of the thin viscous shock layer model. An efficient numerical method of solving these equations, which makes it possible to consider cases of flow past bodies at angles of attack and slip, when there are no planes of symmetry in the flow, is proposed. Some results of calculating the flow past a triaxial ellipsoid with an axial ratio of 103n73 at angles of attack =0–45° and slip angles =0–45° over a broad interval of Reynolds numbers are presented as an example. The effect of the principal determining parameters of the problem on the flow structure in the shock layer and the surface friction and heat transfer coefficients is analyzed. An expression for calculating the heat fluxes to the impermeable surface of smooth blunt bodies in a supersonic homogeneous viscous gas flow over a broad interval of Reynolds numbers is proposed on the basis of the solutions obtained and the results of other authors.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 150–158, March–April, 1989.     

Approximate analytical solutions for heat fluxes in three-dimensional hypersonic flow over blunt bodies

Analytical expressions for the heat flux divided by its value at the stagnation point which depend on the geometric parameters invariant with respect to the choice of the coordinate system, as well as expressions depending on the geometry and the pressure on the surface which have a wider applicability range are obtained in the problem of three-dimensional hypersonic flow over blunt bodies at large and moderate Reynolds numbers. These formulas are derived by solving the thin viscous shock layer equations for a perfect gas using the integral method of successive approximations developed by the author. The accuracy and the range of applicability of the analytical solutions are estimated by comparing them with numerical solutions. On the basis of comparisons with numerical solutions for multicomponent chemically nonequilibrium air at altitudes from 90 to 50 km of the spacecraft reentry trajectory in the Earth’s atmosphere it is shown that the formulas obtained can be used for calculations of the heat flux on an ideal catalytic surface of bodies in hypersonic chemically reacting gas flow.     

Numerical investigation of the hypersonic viscous shock layer on wings of infinite span at angles of attack and slip

In the framework of the theory of a hypersonic viscous shock layer [1] with modified Rankine-Hugoniot relations [2] at the shock wave a study is made of flow past wings of infinite span with a rounded leading edge. A numerical solution to the problem has been obtained in a wide range of variation of the Reynolds number (5–10⁶), the blowing-suction parameter, the angle of attack (0–45 °), and the angle of slip (0–70 °). Data are given on the influence of the angle of slip on the profiles of the temperature and the velocity across the shock layer. A study is made of the dependence of the distributions of the pressure, the heat flux, and the friction coefficients along the surface of the body on the blowing-suction parameter and the angles of attack and slip.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 104–108, March–April, 1984.