Photometry in a continuous flow system

Summary Sulphate in various environmental samples was determined by measuring the optical absorbance upon reaction with the barium(II) dimethylsulphonazo(III) complex. The measurement took place in a flow-through system. Interferences from phosphate, metal ions and others were eliminated. The results of a turbidimetric measurement, a spectrophotometric measurement with thorin, an automatic titration and the proposed method are compared. The latter allows the determination of sulphate in the range of 1.4–60 mol·l^–1. The standard deviation is 0.3–0.6 mol·l^–1, depending on the type of sample (water) analysed. A determination takes 1.5min.

---

Photometric in einem DurchflußsystemBestimmung von Sulphat mit Dimethylsulfonazo(III) in Umweltmaterial mit Hilfe eines Durchflußsystems

Zusammenfassung Sulfat wurde in verschiedenen Umweltproben durch Messung der Extinktion nach Reaktion mit dem Barium(II)-dimethylsulfonazo(III)-komplex im Durchflußsystem bestimmt. Störungen von Phosphat, Metallionen, u.a. wurden beseitigt. Die Ergebnisse einer turbidimetrischen, einer photometrischen, einer automatischen Titration und der vorgeschlagenen Methode werden verglichen. Die Methode ermöglicht die Sulfatbestimmung im Bereich von 1,4–60 mol·l^–1. Die Standardabweichung beträgt 0,3–0,6 mol· l^–1 je nach Typ des Probematerials (Wasser). Eine Bestimmung erfordert 1,5min.

     

Ion-chromatographic determination of iodide in sea water with UV detection

A highly sensitive and selective ion-chromatographic procedure with UV detection at 227 nm was developed for the determination of trace amounts of iodide. The procedure utilizes 0.1M NaOH as eluent, which enables the determination of 1–100 g I^–1 I^– with a precision of ca. 6%. 1000-fold amounts of other anions such as fluoride, chloride, phosphate, sulphate, bromide, nitrite and nitrate do not interfere. The method has been applied to determine iodide in sea water samples from the Indian coast.     

Flow injection method for the fluorimetric determination of Zn with 8-(benzenesulphonamido) quinoline

The development of a fluorimetric method for the determination of zinc, based on the fluorescence of the zinc-8-(benzenesulphonamido) quinoline chelate in a micellar medium of sodium dodecylsulfate, is reported. The detection limit is 0.2 g l^–1, the working range is 0.5–700 g l^–1, and the sample throughput is 145 h^–1. The method was evaluated for the determination of zinc in food samples.A batch procedure for the simultaneous determination of zinc and cadmium, based on the synchronous and derivative spectra, is also proposed.     

Flow injection chemiluminescence determination of l-cysteine in amino acid mixture and human urine with the BrO3 −–quinine system

In this paper, a novel flow injection chemiluminescence (CL) determination of l-cysteine is proposed. The method is based on the CL reaction of l-cysteine and KBrO₃ in acidic medium. The CL intensity was greatly enhanced in the presence of quinine. The CL intensity was linear with l-cysteine concentration in the range of 0.2–80 g L^–1, and the detection limit was 0.1 g L^–1 (3). A complete analysis, including sampling and injecting, could be performed in 1 min, giving a throughput of about 60 h^–1. The relative standard deviation was 1.6% for 0.8 g L^–1 l-cysteine (n=11). The proposed method was satisfactorily applied to the determination of cysteine in an amino acid mixture and human urine. The mechanism of the CL reaction is also discussed.     

Extraction and micro-determination of vanadium(V) in the environment with α-phenylstyrylacrylo-substituted hydroxamic acid and Aliquat 336 and inductively coupled plasma atomic emission spectrometry

A selective and sensitive method for the microgram determination of vanadium(V) with -phenylstyrylacrylohydroxamic acid by selective extraction of the blueish violet vanadium-hydroxamate complex with Aliquat 336 from acidic medium is described. The effect of thiocyanate on the extraction is discussed. The vanadium-hydroxamate complex has _max 553 nm and molar absorptivity 7.8 × 10³ l mol^–1 cm^–1, while the mixed 121 complex, vanadium-hydroxamate-Aliquat 336, has _max 546 nm and molar absorptivity 8.2 × 10³ l mol^–1 cm^–1. The system obeys Beer's law in the range 0.3–10.0 mg l^–1 vanadium. Sandell's sensitivity is 0.00624 g cm². The sensitivity is increased twentyfold by inductively coupled plasma atomic emission measurements on the extract and the detection limit is more than 1 ng ml^–1. Vanadium is determined in standard alloys, rock, environmental and clinical samples.     

Fluorescence high-performance liquid chromatography of trace microamounts of phosphate by oxidation of thiamine to thiochrome

Summary A highly sensitive fluorescence high-performance liquid chromatography, based on the fluorescence of thiochrome which is formed from oxidation of thiamine by the molybdoheteropoly acid of phosphate has been developed for the determination of trace microamounts of phosphate. The method permits the determination of phosphate in the range of 0.1 to 1.0 ng as P/10 l sample solution (3.23×10^–7 to 3.23×10^–6 mol l^–3 as P or PO₄), and it may be possible to apply the proposed method to the microanalysis of phosphate in various biological samples.

---

Fluorescenz-HPLC von Spuren-Phosphat durch Oxidation von Thiamin zu Thiochrom

     

On-line monitoring of phosphate in natural water and effluent streams using sequential injection analysis

Automation of the molybdenum blue method by sequential injection (SIA) for the on-line monitoring of phosphate in natural waters is presented. Although sequential injection analysis runs at one fifth the speed of conventional FIA, it presents many advantages such as simplicity of the manifold, robustness and computer compatibility. A reduction in reagent and sample consumption is also observed. Flow detector fouling does not occur in SIA manifolds as the detector is in contact with water between analysis. The proposed SIA analyser is able to monitor phosphate in the range 0–70 mg l^–1 with a standard deviation of 0.9%. The detection limit is 0.5 mg l^–1 PO ₄ ^3– .     

Complexometric determination of mercury(II) in waters by spectrophotometry of its dithizone complex

This paper presents a new method for the determination of Hg(II) in waters, using indirect spectrophotometric measurements of the Hg(II) dithizone complex. The reagent is a mixture of dithizone, CDTA (1,2-cyclohexylene-dinitrilo-tetraacetic acid), thiourea, ethylic alcohol and glycine. Sensitivity and working range are 0.4 g · l^–1 and 2–100 g · l^–1, respectively. A comparison of the results with those of the cold-vapor atomic absorption spectrometry shows a good correlation for different samples revealing only small interferences. The new method is well suited for on-line measurements, easy to run and has low cost equipment.     

Spectrophotometric determination of uranium with 5-(2′-carboxyphenyl)azo-8-quinolinol in the non-ionic micellar medium of Triton X-100

Triton X-100, a non-ionic surfactant, has been used to sensitize the reaction of 5-(2-carboxyphenyl)azo-8-quinolinol with uranium in aqueous medium at pH 5.2–6.1 to form a wine red coloured complex. The micellar sensitization results in two and a half-times enhanced molar absorptivity enabling the determination of uranium in rock samples at ppm level, stability of the complex enhanced from 4 hours to at least 72 hours. Extraction of the complex is avoided making the procedure simple, rapid and easy in operation. The molar absorptivity and Sandell's sensitivity of the complex are 1.50·10⁴l·mol^–1·cm^–1 and 15.9 ng·cm^–2, respectively, at _max=568 nm. Beer's law is obeyed over the range 0–3.3 g·ml^–1 of uranium. An amount as low as 0.19 g·ml^–1 of uranium could be determined satisfactorily within a relative standard deviation of ±1.3%. The limits of determination and practical quantitation are 0.29 and 1.80 ppm, respectively. The method was applied to the determination of uranium in soil, stream sediment and rock samples.     

Simultaneous determination of pentachlorophenol and carbaryl in water

Summary A rapid method for the simultaneous determination of pentachlorophenol (PCP) and Carbaryl in water is described. A 1 liter water sample is extracted with hexane after acidification with concentrated H₂SO₄. After evaporation to a small volume, the extract is analyzed by gas chromatography-mass spectrometry, operating in the selected ion monitoring mode. Estimated detection limits are 0.08 g L^–1 for PCP and 0.11 g L^–1 for Carbaryl, with recoveries of 96% for PCP and 97% for Carbaryl.     

Simultaneous determination of uranium(IV) and iron(II) with a stopped-flow inductive kinetic spectrophotometric method

A kinetic method for simultaneous determination of multielements is proposed, and a procedure for simultaneous determination of uranium(VI) and iron(II) is established based on their inductive effect on the chromium(VI)-iodide redox reaction in weak acidic medium. The reaction was monitored with the stopped-flow spectrophotometric technique by using I ₃ ^– -starch complex as indicator. The calibration graphs are linear for 0–3.6 g.cm^–3 U(IV), and 0–2.5 g.cm^–3 Fe(II), respectively. Most foreign ions, except for V(IV), Sb(III), do not interfere with the determination.     

Determination of trace amounts of phosphate by flow-injection photometry

This paper describes a simple and rapid procedure for determination of traces of phosphate by means of molybdenum blue chemistry. The use of a cost-effective home-made flow cell with a long path length in combination with a light emitting diode (LED) and a photodiode (PD) is demonstrated as a simple absorbance detector for flow-injection analysis. In this method, a sample is injected into the carrier stream through an injection valve and mixed online with mixed reagent (a mixture of molybdate, bismuth, and ascorbic acid in sulfuric acid). The color intensity of the resulting association complex, molybdenum blue, is measured photometrically (_max 875 nm). The proposed method can be used to detect phosphate in the range 0.02–4.0 mg L^–1 and the precision of the proposed procedure is less than 5% at 0.1 mg L^–1 phosphorus as phosphate. The method has been successfully applied to a variety of natural water samples.     

Column preconcentration of gold by adsorbing AuCl<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> onto methyltrioctyl ammonium chloride–naphthalene and subsequent atomic absorption spectrometric determination

A sensitive, selective and simple preconcentration method for ultra-trace gold determination has been developed that uses naphthalene–methyltrioctyl ammonium chloride (Aliquat 336s) as an adsorbent. Gold, in the form of AuCl₄^–, was retained by the adsorbent in the column at a flow rate of 1 ml min^–1. After filtration, the solid mass consisting of the gold complex and naphthalene was dissolved out of the column with 5 ml of N,N-dimethylformamide (DMF), and the metal was then determined by atomic absorption spectrometry. In the initial solution, the calibration graph of absorbance versus gold concentration was found to be linear in the range 0.5–150 ng ml^–1 Au(III) with r=0.997 (n =9), and the 3 s detection limit was 0.428 ng ml^–1. The relative standard deviation for eight replicate measurements of 20 g of gold was 2.14%. Preconcentration factors of 390 and 650 were achieved using 5 ml and 3 ml of DMF, respectively. The proposed method was successfully applied to the determination of gold in wastewater, processed pool water, slurry pool water, and raw well-water from the Moteh gold mine, and synthetic samples.     

SPE–GC–MS Analysis of Chloroform in Drinking Water

In this paper we report a method based on solid-phase extraction (SPE) and subsequent analysis by gas chromatography combined with mass spectrometry for determination of chloroform in potable water. The affinity of chloroform for the resin enables almost complete recovery of the analyte. The analytical method proposed enables evaluation of chloroform levels down to 0.295 g L^–1. The procedure is characterized by lack of interferences, in fact the GC–MS analysis reveals the presence of only one peak, that of chloroform. Use of CDCl₃ as labelled internal standard also makes the procedure suitable for use as a reference analytical method for quantification of chloroform in drinking water.     

Catalytic Determination of Trace Amounts of Iridium As Chloride Complexes

A procedure was developed for the determination of iridium as chloride complexes by its catalytic action on the oxidation reaction of Sulfarsazene with potassium periodate at pH 5.6. The analytical range was 1 × 10^–5–1 × 10^–3 g/mL iridium. The accuracy of the procedure developed was confirmed in the determination of iridium in model solutions by the standard addition method. The relative standard deviation did not exceed 6%.     

Fluorimetric determination of aluminium in water by sequential injection through column extraction

A fluorimetric procedure for the determination of aluminium with matrix removal in drinking water is proposed. The system is based both on the solid phase extraction of aluminium on a new chelating resin (XAD-4 modified by grafting salicylic acid) and the fluorimetric detection of a complex formed between 8-hydroxyquinoline-5-sulfonic acid (HQS) and Al(III), after elution of the resin by hydrochloric acid. The sorption and elution of aluminium were studied in both competitive and non-competitive conditions, varying pH, flow-rates, volume and concentration of reagents, as well as time contact. The optimised procedure allows determination of Al³⁺ at the sub-ppb level (LOD: 0.2 g L^–1 for 1 ml of sample) within a working range of 0.2–500 g L^–1. The analytical procedure was successfully employed for the determination of aluminium in drinking water during and after flocculation/coagulation treatment processes.     

A sensitive spectrophotometric method for the determination of trace amounts of uranium(VI) using 2-hydroxy-1-naphthaldehyde isonicotinoyl hydrazone

The reaction between uranium(VI) and 2-hydroxy-1-naphthaldehyde isonicotinoyl hydrazone (2HNAINH) has been investigated in HCl-sodium acetate buffers and a highly sensitive and simple procedure for the determination of uranium(VI) is suggested. The orange red colored complex showed maximum absorption at 430 nm in buffer solutions of pH 3. Beer's law is obeyed in the range of 0.2 to 33 g ml^–1. The molar absorptivity and Sandell's sensitivity are found to be 9.6×10³ mol·l^–1 and 0.025 g cm^–2, respectively. The composition of the complex between metal and reagent is found to be 11. The effect of diverse ions is also studied and the method is successfully applied for the determination of uranium in synthetic mixtures.     

Determination of Cd, Co, Cr, Cu, Fe, Mn, Ni and Pb in natural waters, alkali and alkaline earth salts by electrothermal atomic absorption spectrometry after preconcentration by column solid phase extraction

Methods are described for the determination of trace and ultra trace amounts of Cd, Co, Cr, Cu, Fe, Mn, Ni and Pb in natural waters, alkali and alkaline earth salts. Separation and preconcentration of trace metals is achieved by a column solid phase extraction procedure using silica gel modified with derivatives of dithiocarbamates — Na-DDTC (sodium diethyldithio-carbamate and HMDTC (ammonium hexamethylene-dithiocarbamate) as column packing material. The influence of the sorbent preparation procedure on the degree of sorption of the trace analytes is examined for different pH values of the sample solution. Isobutylmethyl ketone (IBMK) is proposed as an effective eluent for quantitative elution of retained metal ions. Optimal instrumental parameters for ETAAS determination of preconcentrated elements in organic eluate are presented. Practical application of sorbents in analysis of natural waters and alkali and alkaline earth salts is demonstrated. Proposed preconcentration procedure combined with ETAAS determination of trace analytes allows the determination of 0.04 g l^–1 Cd, 0.1 g l^–1 Cr, Cu, and Mn and 0.3 g l^–1 Co, Fe, Ni and Pb in natural waters and 1.10^–7% Cd, 3.10^–7% Cr and Mn, 7.10^–7% Co, Ni and Pb and 2.10^–6% Cu and Fe in alkali and alkaline earth salts.     

Photometrische Bestimmung von Bor in hochreinen Chemikalien

Zusammenfassung Bor reagiert in Form des Tetrafluoroboratkomplexes mit dem basischen Farbstoff Methylenblau unter Bildung eines mit 1,2-Dichlorethan extrahierbaren Ionenassoziatkomplexes. Die optimalen Bedingungen für die photometrische Bestimmung von Mikromengen Bor werden ermittelt und das vorgestellte Verfahren hinsichtlich Empfindlichkeit, Genauigkeit und kleinster bestimmbarer Menge charakterisiert.Die Borbestimmung ist im Bereich von 0,25–2,5 g Bor mit einer relativen Standardabweichung von 3,8% für 1,0 g Bor möglich. Der molare Extinktionskoeffizient beträgt ₆₆₅=8,2·10⁴1·mol^–1·cm^–1, die Nachweisgrenze nach Kaiser 0,125 g Bor.Das Verfahren wurde zur Bestimmung von 10^–6 bis 10^–5% Bor in folgenden hochreinen Chemikalien eingesetzt: Methanol, Ethanol, Isopropanol, Aceton, Mineralsäuren, Essigsäure, Ammoniak und Wasserstoffperoxid.

---

Photometric determination of boron in high-purity chemicals

Summary Boron reacts with fluoride to form borofluoride which itself reacts with the basic dye methylene blue forming a complex which can be extracted into 1,2-dichloroethane. Optimum conditions were established for the determination of microamounts of boron by an extraction-photometric method. The procedure presented has been characterized with regard to sensitivity, precision and detection limit.Boron can be determined within a range from 0.25 to 2.5 g with a relative standard deviation s _rel=3.8% for 1 g B. The absorptivity is ₆₆₅=8.2·10⁴1·mol^–1·cm^–1, the detection limit according to Kaiser was found to be 0.125 g B.The procedure was used to analyse high-purity chemicals (10^–6–10^–5% B) such as organic solvents, mineral acids, acetic acid, ammonia, hydrogen peroxide etc.

     

Tris(2-ethylhexyl)phosphate as an extractant for quadrivalent tin,with subsequent determination with pyrocatechol violet in alloy samples

The solvent extraction of tin(IV) from chloride media withtris(2-ethylhexyl)phosphate is presented. Tin(IV) is extracted quantitatively from 2.75–3.20 mol dm^–3 hydrochloric acid using 6.38–6.91 mol dm^–3 tris(2-ethyl-hexyl)phosphate dissolved in toluene as an extractant. After back-extraction of tin(IV) with water from thetris(2-ethylhexyl)phosphate phase, it is estimated spectrophotometrically following complexation with pyrocatechol violet. The recommended range for determination of tin(IV) is 10–100 g. The probable extracted species is SnCl₄·2TEHP. The method is applicable to the analysis of alloy samples with a detection limit of 0.4 g/ml (for 10 g of tin) and a relative standard deviation between 0.21–0.32%.