New C(2)‐substituted 8‐alkylsulfanyl‐9‐phenylmethyl‐hypoxanthines III

Title compounds were obtained starting from the key imidazole intermediate, 5‐amino‐1‐phenyl‐methyl‐2‐mercapto‐1H‐imidazole‐4‐carboxylic acid amide 5 , readily derived from the base catalyzed rearrangement of a thiazole, 5‐amino‐2‐phenylmethylaminothiazole‐4‐carboxylic acid amide 4 . Alkylation of the thiol function on 5 with phenylmethyl and allylic chlorides gave compounds 6 and 7 respectively. Cyclization of 6 with a variety of esters afforded 8‐phenylmethylthiohypoxanthines, 8–11 . Similarly, 7 was cyclized to 8‐allylthiohypoxanthines, 20–21 . Compound 5 was also cyclized, but formed 8‐mercaptohypox‐anthines, 22–24 . Alkylation of 8‐mercaptohypoxanthines afforded 8‐alkylthiohypoxanthines, 8, 9,25 and 26 (see Scheme 2). Chlorination of 9–11 afforded 16–18 ; adenine 19 was derived from 16 . Oxidation of hypox‐anthines 8–11 with m‐chloroperbenzoic acid gave the corresponding 8‐phenylmethylsulfonyl derivatives 12 ‐ 15 . These derivatives proved resistant to nucleophilic displacement reactions with primary amines.     

Substituent and solvent effects on the photosensitized oxygenation of 5,6-dihydro-1,4-oxathiins. Intramolecular oxygen transfer vs normal cleavage of the dioxetane intermediates

The reaction of singlet oxygen with variously substituted oxathiins 1 affords dicarbonyl compounds 4 and/or ketosulfoxides 7 and 8 depending on the nature of the substituent at C3 and on the reaction conditions. The normal fragmentation of dioxetanes 2 to 4 competes with an intramolecular oxygen transfer to ring sulfur, which leads to 7 and 8, presumably via the labile epoxides 5. This new pathway is promoted by electron-withdrawing groups at C3 and, for unsubstituted and monosubstituted amide derivatives 1h and 1i, respectively, by the solvent basicity. Chemical experiments support the intermediacy of epoxides 5 for 7, whereas they are not conclusive for 8. However, the formation of the latter compounds appears to be favored by polar solvents and cation-stabilizing groups at C2 as phenyl or methyl, and these observations may be well accounted for by the suggested pathway from 5 through charged species as E. Direct oxidation by singlet oxygen to sulfur is unsignificant, except for the amide series and for 1g or when the oxygenation is carried out in methanol.     

Effect of amino substituents on the stereochemical outcome of the photo-Arbuzov rearrangements of 1-arylethyl phosphorodiamidites

The essentially stereochemically pure 1-arylethyl phosphorodiamidites 8 and 9 were irradiated by UV light in acetonitrile, benzene, and cyclohexane (Tables 1-4). Reaction via singlet free-radical pairs, formed by carbon-oxygen bond scission (Scheme 1), which are somewhat longer lived than those from the analogous phosphites 5 and 6, is proposed. Tetramethyl 1-phenylethylphosphorodiamidite (8) gives the photo-Arbuzov rearrangement product 10 in 59% +/- 2% GC yield, based on percent 8 consumed (Tables 1 and 4), along with the free radical dimerization product 2,3-diphenylbutane, 12a, in in amounts corresponding to ca. 19% of the potentially formed 1-phenylethyl radicals. Similarly, from 9, the photorearrangement product 11 is generated in 64 +/- 4% yield (Tables 2 and 4) along with a 18 +/- 2% accountability of the 1-naphthylethyl radicals as 12b. The photorearrangement of stereochemically enriched 8 (R/S = 99:1) gives 10 in which an apparent 67 +/- 2% (100y, eq 3, Table 4) of the initial radical pairs [3,14] recombine with retention of configuration at the stereogenic carbon (34 +/- 3% net retention, eq 5). With TEMPO present, 70% (100y, eq 3) of the initial 1-phenylethyl radicals, 14, from 8 combine with radicals 3 in the solvent cage with retained configuration at carbon (40% percent net retention, eq 5). The yield of product 10 is reduced to 54%, and 12a is absent. Similarly, the five-membered ring naphthylethyl analogue, phosphorodiamidite 9 (R/S = 98:2), affords largely (R)-11 with apparent 34 +/- 3% net retention. The degree of stereorandomization observed in these systems is higher than was reported previously for phosphites 5 and 6. The neglect of reconversion of pro-S 14 to pro-R 14 on the results of these studies is addressed. Estimated maximum values (eq 4) of kcomb/krot (2.3) for the proximate radical pairs [3,14] from 8 with TEMPO present appear to be at least 6-fold smaller than those of the analogous phosphite (R)-5 (average kcomb/krot = 13 with TEMPO present). Possible origins for this effect are proposed.     

Unusual equilibria involving group 4 amides, silyl complexes, and silyl anions via ligand exchange reactions

Silyl anion SiButPh2- (2) was found to substitute an amide ligand in Zr(NMe2)4 (3) to give the disilyl complex Zr(NMe2)3(SiButPh2)2- (1a) and Zr(NMe2)5- (1b) in THF. The reaction is reversible, and nucleophilic amide NMe2- attacks the Zr-SiButPh2 bonds in 1a or Zr(NMe2)3(SiButPh2) in the reverse reaction, leading to an unusual ligand exchange equilibrium 2 3 + 2 2 right harpoon over left harpoon 1a + 1b (eq 1). The silyl anion 2 selectively attacks the -N(SiMe3)2 ligand in Zr(NMe2)3[N(SiMe3)2] (6) to give 1a and N(SiMe3)2- (7). Reversible reaction occurs as well, where 7 selectively substitutes the silyl ligand in Zr(NMe2)3(SiButPh2)2- (1a) or Zr(NMe2)3(SiButPh2), giving the equilibrium 6 + 2 2 right harpoon over left harpoon 1a + 7 (eq 3). The thermodynamics of these equilibria has been studied: For eq 1, DeltaH degrees = -8.3(0.2) kcal/mol, DeltaS degrees = -23.3(0.9) eu, and DeltaG degrees 298K = -1.4(0.5) kcal/mol at 298 K; for eq 3, DeltaH degrees = -1.61(0.12) kcal/mol, DeltaS degrees = -2.6(0.5) eu, and DeltaG degrees 298K = -0.8(0.3) kcal/mol. In both equilibria, the enthalpy changes for the forward reactions outweigh the entropy changes, and therefore the substitutions of amide ligands in Zr(NMe2)4 (3) and Zr(NMe2)3[N(SiMe3)2] (6) to afford the disilyl complex 1a are thermodynamically favored. The following equilibria were also observed and studied: Zr(NMe2)3[N(SiMe3)2] (6) + Si(SiMe3)3- (9) right harpoon over left harpoon Zr(NMe2)3[Si(SiMe3)3] (10) + N(SiMe3)2- (7) and Zr(NMe2)4 (3) + 9 right harpoon over left harpoon 10 + Zr(NMe2)5- (1b).     

8-5’新木脂素类化合物的合成方法研究

对羟基桂皮酸甲酯和阿魏酸甲酯分别在氧化银催化下发生自由基仿生氧化偶联反应, 合成得苯并二氢呋喃环结构化合物1, 1经甲基化反应得2. 1a和1和2分别在无水碳酸钾、10%氢氧化钠水溶液等不同的碱性条件下进行反应, 获得了11个苯并二氢呋喃环开环产物, 即8-5’新木脂素类化合物3a～9b, 实现了由苯并二氢呋喃新木脂素向8-5’新木脂素的转变, 也为合成芪类化合物提供了一种新方法. C-8位上的吸电子基团如酯基的影响使苯并二氢呋喃环易在碱性条件下开环形成8-5’新木脂素类化合物．所合成化合物的结构由MS, IR, 1H NMR和13C NMR进行了表征.     

Is there a generalized reverse anomeric Effect? substituent and solvent effects on the configurational equilibria of neutral and protonated N-arylglucopyranosylamines and N-aryl-5-thioglucopyranosylamines

The effects of substitution and solvent on the configurational equilibria of neutral and protonated N-(4-Y-substituted-phenyl) peracetylated 5-thioglucopyranosylamines (Y = OMe, H, CF(3), NO(2)) 1-4 and N-(4-Y-substituted-phenyl) peracetylated glucopyranosylamines (Y = OMe, H, NO(2)) 9-11 are described. The configurational equilibria were determined by direct integration of the resonances of the individual isomers in the (1)H NMR spectra after equilibration of both alpha- and beta-isomers. The equilibrations of the neutral compounds 1-4 in CD(3)OD, CD(3)NO(2), and (CD(3))(2)CO were achieved by HgCl(2) catalysis and those of the neutral compounds 9-11 in CD(2)Cl(2) and CD(3)OD by triflic acid catalysis. The equilibrations of the protonated compounds in both the sulfur series (solvents, CD(3)OD, CD(3)NO(2), (CD(3))(2)CO, CDCl(3), and CD(2)Cl(2)) and oxygen series (solvents, CD(2)Cl(2) and CD(3)OD) were achieved with triflic acid. The substituent and solvent effects on the equilibria are discussed in terms of steric and electrostatic effects and orbital interactions associated with the endo-anomeric effect. A generalized reverse anomeric effect does not exist in neutral or protonated N-aryl-5-thioglucopyranosylamines and N-arylglucopyranosylamines. The anomeric effect ranges from 0.85 kcal mol(-)(1) in 2 to 1.54 kcal mol(-)(1) in 10. The compounds 1-4 and 9-11 show an enhanced endo-anomeric effect upon protonation, ranging from 1.73 kcal mol(-)(1) in 2 to 2.57 kcal mol(-)(1) in 10. We estimate the increase in the anomeric effect upon protonation of 10 to be approximately 1.0 kcal mol(-)(1). However, this effect is offset by steric effects due to the associated counterion which we estimate to be approximately 1.2 kcal mol(-)(1). The values of K(eq)(axial-equatorial) in protonated 1-4 increase in the order OMe < H < CF(3) < NO(2), in agreement with the dominance of steric effects (due to the counterion) over the endo-anomeric effect. The values of K(eq)(axial-equatorial) in protonated 9-11 show the trend OMe > H < NO(2) that is explained by the balance of the endo-anomeric effect and steric effects in the individual compounds. The trends in the values of the C(1)-H(1) coupling constants for 1-4 and the corresponding deacetylated compounds 5-8 as a function of substituent and alpha- or beta-configuration are discussed in terms of the Perlin effect and the interplay of the endo- and exo-anomeric effects.     

1,3,2-Diazaborolyl-functionalized thiophenes and dithiophenes: synthesis, structure, electrochemistry and luminescence

Reaction of 2-bromo-1,3-diethyl-1,3,2-benzodiazaborole (1) with equimolar amounts of thienyl lithium or 2,2-dithienyl lithium led to the generation of benzodiazaboroles 2 and 3 which are functionalized at the boron atom by a 2-thienyl or a 5-(2,2-dithienyl) unit. Similarly 2-bromo-1,3-diethyl-1,3,2-naphthodiazaborole (4) and thienyl lithium or 2,2-dithienyl lithium afforded the naphthoborolyl-substituted thiophene 5 or dithiophene 6. Treatment of 2,5-bis(dibromoboryl)-thiophene 7 with 2 eq. of tBuN=CH-CH=NtBu in n-hexane followed by sodium amalgam reduction of the obtained bis(diazaborolium) salt 8 gave the 2,5-bis(diazaborolyl)thiophene 9. The 2,5-bis(diazaborolidinyl)-thiophene 10 resulted from the cyclocondensation of 7 with 2 eq. of N,N-di-tert-butylethylenediamine in the presence of NEt3. Analogously, cyclocondensation of 7 with N,N-diethylphenylenediamine gave the bis(benzodiazaborolyl) functionalized thiophene 11. The novel compounds were characterized by elemental analysis and spectroscopy (1H-, 11B-, 13C-NMR, MS and UV-VIS). The molecular structure of 3 was elucidated by X-ray diffraction. Cyclovoltammograms show an irreversible oxidation wave at 298-598 vs. Fc/Fc+. The borolylated thiophenes and dithienyls show intense blue luminescence with Stokes shifts of 30-107 nm.     

Quaternary salts containing the pentafluorosulfanyl (SF5) group

The first quaternary salts of pyridine (2), N-methyl imidazole (3), N-propyl triazole (4), and pyridazine (5) that contain the pentafluorosulfanyl (SF(5)) group were prepared and characterized. Neat reactions of the aromatic nitrogen compounds with SF(5)(CF(2))(n)(CH(2))(m)I (n = 2 or 4, m = 2 or 4) gave quaternary iodides 6a-c, 7a-c, 8a, and 9a,b, which were metathesized with LiN(SO(2)CF(3))(2) to form the bis(trifluoromethylsulfonyl)amides 10a-c, 11a-c, 12a, and 13a,b, in high yields. With the exception of the pyridine bis(trifluoromethylsulfonyl)amide salts, the compounds melted or exhibited a T(g) at <0 degrees C. The methylimidazolium, pyridinium, and pyridazinium salts exhibited densities of approximately 2 g/cm(3). Particularly striking was the density of CF(3)(CF(2))(5)(CH(2))(2)-pyridazinium N(CF(3)SO(2))(2) measured at 2.13 g/cm(3); however, an atypically high density for the 1-CF(3)(CF(2))(5)(CH(2))(2)-3-methyl imidazolium amide (14) was also observed at 1.77 g/cm(3). All quaternary salts were characterized via IR, (19)F, (1)H, and (13)C NMR spectra and elemental analyses.     

Synthesis and Reactions of Some Heterocyclic Candidates Based on 2‐Amino‐4,5,6,7‐tetrahydrobenzo[b]thiophene Moiety as Anti‐Arrhythmic Agents

In continuation of our previous work, a series of novel thiophene derivatives 4 , 5 , 6 , 8 , 9 , 9a , 9b , 9c , 9d , 9e , 10 , 10a , 10b , 10c , 10d , 10e , 11 , 12 , 13 , 14 , 15 , 16 were synthesized by the reaction of ethyl 2‐amino‐4,5,6,7‐tetrahydrobenzo[b]thiophene‐3‐carboxylate ( 1 ) or 2‐amino‐4,5,6,7‐tetrahydrobenzo[b]thiophene‐3‐carbonitrile ( 2 ) with different organic reagents. Fusion of 1 with ethylcyanoacetate or maleic anhydride afforded the corresponding thienooxazinone derivative 4 and N‐thienylmalimide derivative 5 , respectively. Acylation of 1 with chloroacetylchloride afforded the amide 6 , which was cyclized with ammonium thiocyanate to give the corresponding N‐theinylthiazole derivative 8 . On the other hand, reaction of 1 with substituted aroylisothiocyanate derivatives gave the corresponding thiourea derivatives 9a , 9b , 9c , 9d , 9e , which were cyclized by the action of sodium ethoxide to afford the corresponding N‐substituted thiopyrimidine derivatives 10a , 10b , 10c , 10d , 10e . Condensation of 2 with acid anhydrides in refluxing acetic acid afforded the corresponding imide carbonitrile derivatives 11 , 12 , 13 . Similarly, condensation of 1 with the previous acid anhydride yielded the corresponding imide ethyl ester derivatives 14 , 15 , 16 , respectively. The structures of newly synthesized compounds were confirmed by IR, ¹H NMR, ¹³C NMR, MS spectral data, and elemental analysis. The detailed synthesis, spectroscopic data, LD₅₀, and pharmacological activities of the synthesized compounds are reported.     

The first (ferrocenylmethyl)imidazolium and (ferrocenylmethyl)triazolium room temperature ionic liquids

N-(Ferrocenylmethyl)imidazole (3a), 1-(ferrocenylmethyl)-1,2,4-triazole (3b), 1,1'-bis[(1H-imidazol-1-yl)methyl]ferrocene (8a), 1,1'-bis([1H-(2-methyl)imidazol-1-yl]methyl]ferrocene (8b), and 1,1'-bis[(1H-1,2,4-triazol-1-yl)methyl]ferrocene (8c) were synthesized in moderate yields. These compounds were quaternized with methyl iodide to form 1-(ferrocenylmethyl)-3-methylimidazolium iodide (4a), 1-(ferrocenylmethyl)-4-methyl-1,2,4-triazolium iodide (4b), 1,1'-bis([1-(2,3-dimethyl)imidazolium]methyl)ferrocene diiodide (9b), and 1,1'-bis([1-(4-methyl)-1,2,4-triazolium]methyl)ferrocene diiodide (9c), respectively, in excellent yields. Compounds 4a, 4b, 9b, and 9c were metathesized with bis(trifluoromethanesulfonyl)amide to give high yields of 5a, 5b, 10b, and 10c. With potassium hexafluorophosphate, 9b forms 10d. Salts 5a, 5b, and 10c are the first room-temperature ionic liquids with cations containing an organometallic moiety that exhibit T(g) values well below room temperature, i.e., -32, -16, and -11 degrees C. The compounds were characterized by (1)H, (19)F, and (13)C NMR, MS, and elemental analyses. T(g) values and melting points were determined by DSC. T(d) values (5% weight loss temperature) were recorded by TGA. X-ray single-crystal structures show that 9c and 10d crystallize in the triclinic space group P.     

Synthesis of 2-(N-Acetylamino)-2-deoxy-C-glucopyranosyl nucleosides as potential inhibitors of chitin synthases

The C-glucopyranosyl nucleosides (1-4) containing the N-acetyl glucosaminyl and uridine units have been synthesized as nonhydrolyzable substrate analogues of UDP-GlcNAc aimed to inhibit the chitin synthases. The key intermediate, 4-(2'-(N-acetylamino)-3', 4',6'-tri-O-benzyl-2'-deoxy-alpha-D-glucopyranosyl)but-2-enoic acid (5), was prepared from the perbenzylated (N-acetylamino)-alpha-C-allylglucoside (7), by successive oxidative cleavage, Wittig olefination, and ester deprotection. The coupling of the acid 5 with the hydroxyl or amine function of the uridine derivatives (6a or 6b) afforded, respectively, the ester 12 and amide 14. The dihydroxylation of the conjugated double bond in ester 12 or amide 14 was better achieved with osmium tetraoxide/barium chlorate, leading to the expected diols 13 and 15 as a mixture of two diastereoisomers. The desired compounds 1-4 were obtained after catalytic hydrogenation of compounds 12-15.     

Brominations of steroidal hormone having alpha,beta-unsaturated ketone, 17-O-acetyltestosterone, in the presence of silver triflate

Bromination of 17-O-acetyltestosterone (17beta-acetoxyandrost-4-en-3-one) (1) was performed with 1, 5, and 10 eq of Br2 in AcOH-Et2O at room temperature. In all cases 2alpha,6beta- (2) and 2alpha,6beta-dibromo-17beta-acetoxyandrost-4-en-3-one (3) were obtained, although the yields were dependent upon the conditions used. Bromination of compound 1 with 10 eq of Br2 in the presence of silver trifluoromethanesulfonate (silver triflate, AgOTf) at room temperature for 12 h gave 2,7alpha-dibromo- (4) and 2,4,7alpha-tribromo-17beta-acetoxy-3-hydroxy-1-methylestra-1,3,5(10)-triene-6-one (5). The formations of the products were inferred on the basis of products obtained under controlled brominations of 1 in the presence of AgOTf, and of those obtained by the brominations of compounds 9-13 also in the presence of AgOTf.     

Design,synthesis, and evaluation of matrix metalloprotease inhibitors bearing cyclopropane-derived peptidomimetics as P1' and P2' replacements

We have previously used trisubstituted cyclopropanes as peptide replacements to induce conformational constraints in known pseudopeptide inhibitors of a number of important enzymes. Cyclopropane-derived peptide mimics are novel in that they are among the few replacements that locally orient the peptide backbone and the amino acid side chain in a predefined manner. Although these dipeptide isosteres have been employed to orient amino acid side chains mimicking the gauche(-) conformation of chi(1)-space, their ability to project the side chains into an anti orientation has not been evaluated. As a first step toward this goal, the conformationally constrained pseudopeptides 8 and 10 and their corresponding flexible analogues 9 and 11 were prepared and tested as inhibitors of matrix metalloproteinases (MMPs). These compounds are analogues of 4 and 5, which were known to be potent MMP inhibitors. The anti orientations of the isopropyl side chain in 8 and the aromatic ring in 10 relative to the peptide backbone substituents on the cyclopropane were predicted to correspond to the known orientations of the P1' and P2' side chains of 5 when bound to MMPs. Hence, 8 and 10 were designed explicitly to probe topological features of the S1' or the S2' binding pockets of the MMPs. They were also designed to explore the importance of the P1'-P2' amide group, which is known to form highly conserved hydrogen bonds in several MMP-inhibitor complexes, and the viability of introducing a retro amide linkage between P2' and P3'. Pseudopeptides 8 and 9 were found to be weak competitive inhibitors of a series of MMPs. Any entropically favorable conformational constraints that were induced by the cyclopropane in 8 were thus overwhelmed by the loss of the hydrogen bonding capability associated with the P1'-P2' amide group. On the other hand, compounds 10 and 11, which contain a P2'-P3' retro amide group, were modest competitive inhibitors of a series of MMPs. The results obtained for 10 and 11 suggest that there may be a loss of hydrogen bonding capability associated with introducing the P2'-P3' retro amide group. However, because the conformationally constrained pseudopeptide 10 was significantly more potent than its flexible analogue 11, trisubstituted cyclopropanes related to 3 may serve as useful rigid dipeptide replacements in some biologically active pseudopeptides.     

Evaluation of 1‐arylpiperazine derivative of hydroxybenzamides as 5‐HT1A and 5‐HT7 serotonin receptor ligands: An experimental and molecular modeling approach

The synthesis and evaluation as 5‐HT_1A and 5‐HT₇ serotonin receptor ligands of the two sets of O‐substituted hydroxybenzamides, structurally related to 2‐{3‐[4‐(2‐methoxyphenyl)piperazin‐1‐yl]propoxy}benzamide ( 1 ), (K_i 5‐HT_1A = 21 nM, 5‐HT₇ = 234 nM) are reported. To affect the affinity for 5‐HT_1A and 5‐HT₇ receptors, an amide moiety ( 2 , 3 , 4 , 5 , 6 ) and a hydrocarbon chain length ( 7 , 8 , 9 , 10 ) were modified. The serotonergic activity of compounds 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 was generally higher in the case of 5‐HT_1A receptors compared with 5‐HT₇ ones; the most active 5‐HT_1A ligands being meta‐isomer 2 (K_i = 7 nM) and both analogs of 1 with the longest spacer, i.e., penta‐ and hexa‐methylene derivatives 9 and 10 (K_i = 4 and 3 nM, respectively). The observed biological properties of compounds 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 were elucidated using molecular modeling procedures. J. Heterocyclic Chem., (2010).     

Design,synthesis and insecticidal activities of novel 1-substituted-5-(trifluoromethyl)-1H-pyrazole-4-carboxamide derivatives

A series of novel 5-(trifluoromethyl)-1H-pyrazole-4-carboxamide derivatives(6a–6n, 7a, 7b, and 8a-8f)were synthesised by placing the amide bond at the 4-position of the pyrazole ring. These derivatives differed from the structure of chlorantraniliprole analogues with the amide bond at the 5-position of the pyrazole ring. Preliminary bioassay results revealed that a few title compounds exhibited good insecticidal activities against lepidopteran pests, such as Plutella xylostella, Mythimna separate, Heliothis armigera, and Ostrinia nubilalis. Some title compounds also elicited broad-spectrum insecticidal activities against dipterous insects including Culex pipiens pallens after altering the amide position. Similar to pyrazole-5-carboxamide analogues, compounds 6b and 6e showed 100% insecticidal activity against P. xylostella, C. pipiens pallens, and M. separate at concentrations of 200, 2, and 200 mg/m L, respectively.This finding suggested that 5-(trifluoromethyl)-1H-pyrazole-4-carboxamide derivatives are potential alternative insecticides for management of agriculture pests.     

Efficient synthesis of enantiomerically pure 2-acylaziridines: Facile syntheses of N-Boc-safingol, N-Boc-D-erythro-sphinganine, and N-Boc-spisulosine from a common intermediate

Various enantiomerically pure 2-acylaziridines were prepared efficiently from the corresponding aziridine-2-carboxylate via Weinreb's amide and the subsequent treatment of organometallic compounds. The carbonyl group of those 2-acylaziridines was stereoselectively reduced by NaBH4in the presence of ZnCl2 to give erythro-1,2-amino alcohols with high diastereoselectivities and chemical yields. Using this methodology, we prepared (1R,2S)-N-Boc-norephedrine 5, N-Boc-safingol 8, N-Boc-D-erythro-sphinganine 9, and N-Boc-spisulosine 10 in high yields.     

Pyrazoles and pyrazolo[4,3‐e]pyrrolo[1,2‐a]pyrazines II

Synthesis of the title compounds was achieved using the anils 2a , 2b , 2c , 2d , 2e and 5a , 5b , 5c derived from the 4‐aminopyrazole 1 as starting materials. These compounds were allowed to react with mercaptoacetic acid in boiling dry benzene to afford the corresponding thiazolidinones and spiro‐thiazolidinones 3a , 3b , 3c , 3d , 3e and 6a , 6b , 6c , respectively. Pictet—Spengler reaction of the 4‐aminopyrazole hydrochloride 7 with aromatic aldehydes and cyclic ketones resulted in the formation of new pyrazolo[4,3‐e]pyrrolo[1,2‐a]pyrazines 8a , 8b , 8c , 8d , 8e and 9a , 9b , respectively. Other derivatives of pyrazolo pyrrolopyrazines 10 and 11 were obtained via the reaction of the amino derivative 1 with 1,1′‐carbonyldiimidazol and CS₂, respectively. J. Heterocyclic Chem., (2011).     

Turpinionosides A-E: megastigmane glucosides from leaves of Turpinia ternata Nakai

From leaves of Turpenia ternata (Staphylaceae), one megastigmane and seven of its glucosides (1-8) were isolated. Megastigmane and two of the glucosides were found to be known compounds, namely, 3S,5R,6R,9S-tetrahydroxymegastigmane (1), corchoionoside C (2), and icariside B4 (3). The structures of compounds 4-8 (turpinionosides A-E, respectively) were elucidated by means of spectroscopic analyses, and then their absolute structures were determined by the modified Mosher's method to be (3S,5R,6S,9S)-3,6,9-trihydroxymegastigman-7-ene 3-O- and 9-O-beta-D-glucopyranosides (4, 5, respectively), (1S,3S,5R,6S,9R)-3,9,12-trihydroxymegastigmane 3-O-beta-D-glucopyranoside (6), (3S,4R,9R)-3,4,6-trihydroxymegastigman-5-ene 3-O-beta-D-glucopyranoside (7), and (2S,9R)-2,9-dihydroxymegastigman-5-en-4-one 2-O-beta-D-glucopyranoside (8).     

Synthesis of 2,2′-dithiobis- and 2,2′-trithiobis-3-pyridinecarboxylic acid derivatives as new potential radiosensitizers/radioprotectors

This paper reports the synthesis of dithio and trithio derivatives of 1,2-dihydro-2-thioxopyridine, starting with 1,2-dihydro-2-thioxo-3-pyridine carboxylic acid 1 . This compound reacted with thionyl chloride to give the respective dithiobis (acyl chloride) 2 , which hydrolyzed to the corresponding dithio acid 3 . On the other hand, 1 reacted with sulfur dichloride to give trithio acid 4 , which on treatment with thionyl chloride gave the trithiobis (acyl chloride) 5 . Treatment of 2 and 5 with ethanol/pyridine, gave 8 and 12 respectively. Compounds 2–5, 8 and 12 were unstable in alkaline medium and they were degraded to 1 . The bis(acyl chloride) 2 and 5 reacted with ammonia and primary and secondary amines to give the respective bis(amide) 9 and 13 . Most of these amides (R = H, alkyl, aryl, R' = H) were found to be unstable in the presence of bases such as triethylamines, pyridine or excess of the starting amine, which promotes disproportion to give (see Scheme 3) the respective N-substituted (R) 1,2-dihydro-2-thioxo-3-pyridinecarboxamide 10 and the respective 2-substituted (R)-3-oxo-isothiazolo[5,4-b]pyridine 11 . On the other hand, compounds 11 were unstable to strong bases and they were transformed into the respective compounds 10 by an unknown mechanism. Boiling 11f with sodium hydroxide in ethanol gave 10f (50%). According to these last results, boiling 9h or 13d with sodium hydroxide in ethanol 10h (68%) and 10d (70%) were obtained.     

Synthesis of PCP-supported nickel complexes and their reactivity with carbon dioxide

The Ni amide and hydroxide complexes [(PCP)Ni(NH(2))] (2; PCP=bis-2,6-di-tert-butylphosphinomethylbenzene) and [(PCP)Ni(OH)] (3) were prepared by treatment of [(PCP)NiCl] (1) with NaNH(2) or NaOH, respectively. The conditions for the formation of 3 from 1 and NaOH were harsh (2 weeks in THF at reflux) and a more facile synthetic route involved protonation of 2 with H(2)O, to generate 3 and ammonia. Similarly the basic amide in 2 was protonated with a variety of other weak acids to form the complexes [(PCP)Ni(2-Me-imidazole)] (4), [(PCP)Ni(dimethylmalonate)] (5), [(PCP)Ni(oxazole)] (6), and [(PCP)Ni(CCPh)] (7), respectively. The hydroxide compound 3, could also be used as a Ni precursor and treatment of 3 with TMSCN (TMS=trimethylsilyl) or TMSN(3) generated [(PCP)Ni(CN)] (8) or [(PCP)Ni(N(3))] (9), respectively. Compounds 3-7, and 9 were characterized by X-ray crystallography. Although 3, 4, 6, 7, and 9 are all four-coordinate complexes with a square-planar geometry around Ni, 5 is a pseudo-five-coordinate complex, with the dimethylmalonate ligand coordinated in an X-type fashion through one oxygen atom, and weakly as an L-type ligand through another oxygen atom. Complexes 2-9 were all reacted with carbon dioxide. Compounds 2-4 underwent facile reaction at low temperature to form the κ(1)-O carboxylate products [(PCP)Ni{OC(O)NH(2)}] (10), [(PCP)Ni{OC(O)OH}] (11), and [(PCP)Ni{OC(O)-2-Me-imidazole}] (12), respectively. Compounds 10 and 11 were characterized by X-ray crystallography. No reaction was observed between 5-9 and carbon dioxide, even at elevated temperatures. DFT calculations were performed to model the thermodynamics for the insertion of carbon dioxide into 2-9 to form a κ(1)-O carboxylate product and understand the pathways for carbon dioxide insertion into 2, 3, 6, and 7. The computed free energies indicate that carbon dioxide insertion into 2 and 3 is thermodynamically favorable, insertion into 8 and 9 is significantly uphill, insertion into 5 and 7 is slightly uphill, and insertion into 4 and 6 is close to thermoneutral. The pathway for insertion into 2 and 3 has a low barrier and involves nucleophilic attack of the nitrogen or oxygen lone pair on electrophilic carbon dioxide. A related stepwise pathway is calculated for 7, but in this case the carbon of the alkyne is significantly less nucleophilic and as a result, the barrier for carbon dioxide insertion is high. In contrast, carbon dioxide insertion into 6 involves a single concerted step that has a high barrier.