Formation and characterization of Cu<Subscript>x</Subscript>S layers on polyethylene film using the solutions of sulfur in carbon disulfide

Results of the formation of copper sulfide layers using the solutions of elemental sulfur in carbon disulfide as precursor for sulfurization are presented. Low density polyethylene film can be effectively sulfurized in the solutions of rhombic (α) sulfur in carbon disulfide. The concentration of sulfur in polyethylene increases with the increase of the temperature and concentration of sulfur solution in carbon disulfide and it little depends on the duration of sulfurization. Electrically conductive copper sulfide layers on polyethylene film were formed when sulfurized polyethylene was treated with the solution of copper (II/I) salts. Cu_xS layer with the lowest sheet resistance (11.2 Ω cm⁻²) was formed when sulfurized polyethylene was treated with copper salts solution at 80°C. All samples with formed Cu_xS layers were characterized by X-ray photoelectron spectroscopy. XPS analysis of obtained layers showed that on the layer’s surface and in the etched surface various compounds of copper, sulfur and oxygen are present: Cu₂S, CuS, CuO, S₈, CuSO₄, Cu(OH)₂ and water. The biggest amounts of CuSO₄ and Cu(OH)₂ are present on the layer’s surface. Significantly more copper sulfides are found in the etched layers.     

The formation of mixed copper sulfide—silver sulfide membranes for copper( II)-selective electrodes: Part II. Relation between structure and electrochemical behaviour of the electroactive material

Mixed copper sulfide—silver sulfide precipitates used for copper-selective electrodes have been studied by x-ray powder diffractometry, scanning electron microscopy and solubility measurements, in order to find an explanation for the high limit of detection, measured in calibration experiments as well as in titrations. X-ray diffraction showed that some precipitates consisted of ternary sulfides (mainly jalpaite, Ag_1.5 ,Cu_0.5 S), while others were mixtures of the binary sulfides. The presence of ternary sulfides could be correlated with optimal electrochemical and mechanical characteristics. The solubility measurements showed extraordinarily high solubilities for these sulfides. Evidence is given that these high solubilities are caused by the oxidation of copper(I) present in the ternary compound, the reaction being Cu₂S ? CuS + Cu²⁺ + 2e^-. S.e.m. photographs gave some additional information about the structure and the particle size of several precipitates.     

The effects of pretreatment of polycrystalline gold with OH<Superscript>•</Superscript> radicals on the electrochemical nucleation and growth of platinum

The nucleation and growth of platinum on polycrystalline gold was studied by chronoamperometry, cyclic voltammetry, and atomic force microscopy before and after treatment of the gold surface with hydroxyl (OH^•) radicals. Two different procedures of mechanical polishing of the gold surface (“coarse polish” and “fine polish”) were applied before the treatment with OH^• radicals. The nucleation and growth of Pt was much better reproducible on electrodes which underwent a “coarse polish”. The treatment of the Au surface with OH^• radicals decreased the number of active sites; however, the nucleation growth mode remained the same (3-D instantaneous). The spontaneous Pt deposition (no externally applied potential) on Au was unaffected by the treatment with OH^• radicals. In situ atomic force microscopy experiments showed that the Pt starts to grow only on some of the Au grains, most probably on those which have active sites on their surface. This leads to a roughening of the electrode surface upon Pt deposition. Treatment with OH^• radicals did only quantitatively diminish the amount of deposited Pt, but qualitatively the imaging of the Pt growth remained the same. Obviously, the OH^• radicals lead to a knockout (decreasing number) of active sites for Pt nucleation, while the nature of the remaining active sites stays unaffected.     

Effect of ionizing radiaton on the stability of colloidal silver and other metals in aqueous solutions

The effect of ionizing radiation (accelerated electrons and γ-rays of⁶⁰Co) on the stability of aqueous solutions of colloidal silver was studied. The threshold of absorbed dose, at which the stability dramatically decreases and coagulation of the metal occurs, was found. This critical dose corresponds to the reduction of silver ions that determine the electrical potential of the sols. “Radiation” neutralization was also found for cadmium sols and was not observed in the case of thallium, copper, or platinum. A mechanism of the effect of radiation, taking into account the electrostatic factor in the stability of metal sols, was considered. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 259–264, February, 1997.     

Metal Cation Valency Dependence in Morphology Evolution of Cu2−xS Nanodisk Seeds and Their Pseudomorphic Cation Exchanges

A crucial parameter in the design of semiconductor nanoparticles (NPs) with controllable optical, magnetic, electronic, and catalytic properties is the morphology. Herein, we demonstrate the potential of additive metal cations with variable valency to direct the morphology evolution of copper-deficient Cu_2−xS nanoparticles in the process of seed-mediated growth. In particular, the djurleite Cu_1.94S seed could evolve from disk into tetradecahedron in the presence of tin(IV) cations, whereas they merely formed sharp hexagonal nanodisks with tin(II) cations. In addition to djurleite Cu_1.94S, the tin(IV) cations could be generalized to direct the growth of roxbyite Cu_1.8S and covellite CuS nanodisk seeds into tetradecahedra. We further perform pseudomorphic cation exchanges of Cu_1.94S tetradecahedra with Zn²⁺ and Cd²⁺ to produce polyhedral zinc sulfide (ZnS) and cadmium sulfide (CdS) NPs. Moreover, we achieve Cu_1.8S/ZnS and Cu_1.94S/CdS tetradecahedral heterostructures via partial cation exchange, which are otherwise inaccessible by traditional synthetic approaches.     

Characteristics of copper sulfide nanoparticles obtained in the copper sulfate–sodium thiosulfate system

Stable hydrosols of copper sulfide nanoparticles are synthesized by heating aqueous solutions with different ratios of sodium thiosulfate and copper sulfate in the presence of polyvinylpyrrolidone and studied by a number of physicochemical methods in situ (optical spectroscopy, dynamic light scattering) and ex situ (transmission electron microscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy). The main product is CuS covellite nanoparticles with some impurities of other phases (Cu₂S, Cu_1,8S, Cu₇S₄). With an increase in the initial molar ratio S₂O ^2?₃ / Cu from 0.2 to 5 the nanoparticle size increases from 1-5 nm to 30-50 nm and then decreases to 4 nm at a ratio of 10. A substantial increase in the intensity of plasmon absorption within 800-1500 nm is observed during the formation of planar nanoparticles with a lateral size of about 30 nm at S₂O ^2?₃:Cu = 5. A band gap obtained from both direct and indirect optical absorption spectra of sulfides (2.6 eV and 1.7 eV respectively) remains constant for all particles.     

XPS study of silver and copper nanoparticles demonstrated selective anticancer,proapoptotic, and antibacterial properties

Silver and copper nanoparticles were produced by an ecologically safe metal vapor synthesis (MVS) method using acetone as an organic dispersion medium. Transmission electron microscopy (TEM) showed that the specimens are spherical and polydisperse, and their average size is 2.5 nm for silver nanoparticles (Ag NPs) and 2.6 nm for copper nanoparticles (Cu NPs). X-ray photoelectron spectroscopy analyses showed that the state of silver in the nanoparticles is close to that of silver in the Ag⁰ state, whereas copper black contains two oxidized states of the metal—Cu⁺ and Cu²⁺. Biological in vitro studies demonstrated that the nanoparticles have antibacterial activity against Gram-positive and Gram-negative bacterial species. Cu NPs exhibited more prominent antibacterial effects and induced significant growth inhibition of Bacillus cereus and Escherichia coli. Both types of nanoparticles showed anticancer properties in vitro. Cu NPs induced intense cytotoxicity in cancer and normal fibroblasts in vitro cultures, but their inhibitory effect against noncancerous cells was milder compared with cancer cell lines. Ag NPs demonstrated selective cytotoxicity against human lung and cervical adenocarcinoma cell lines. Further in vitro studies indicated that the mechanism of Ag NPs and Cu NPs anticancer effects involves induction of apoptosis. The present study describes a green synthesis approach for production of biologically active silver and copper nanoparticles and highlights their potential for medical application.     

Colloidal copper in aqueous solutions: radiation-chemical reduction,mechanism of formation,and properties

Colloidal copper has been obtained by -irradiation of aqueous solutions of copper (II) perchlorate in the presence of alcohol and polyethyleneimine (PEI). The sols are spherical particles about 4 nm in diameter, which are quickly oxidized by oxygen or other oxidants. When Cu^II is not entirely incorporated into the complex with PEI, disproportionation of Cu^I aqua complexes formed affords the metal, along with Cu₂O. Reduction of the PEI complex of Cu^I by hydrated electrons gives only colloidal copper. The copper ions can be reduced on the surface of silver sols. Optical parameters of the resulting bimetallic particles have been studied. The presence of copper ions leads to broadening of the absorption band associated with the silver sols and shifts it to the UV region, which is due to the transfer of electrons from copper to silver. Three copper monolayers are enough to cause plasmon absorption of colloidal copper.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 25–30, January, 1994.     

Evolved gas analyses on a mixed valence copper(I,II) complex salt with thiosulfate and ammonia by in situ TG-EGA-FTIR and TG/DTA-EGA-MS

Thermal decomposition of a mixed valence copper salt, Na₄[Cu(NH₃)₄][Cu(S₂O₃)₂]₂·0.5NH₃ (1) prepared from pentahydrates of sodium thiosulfate and copper sulphate of various molar ratios in 1:1 v/v aqueous ammonia solution, has been studied up to 1,000 °C in flowing air by simultaneous thermogravimetric and differential thermal analysis coupled online with quadrupole mass spectrometer (TG/DTA-MS) and FTIR spectrometric gas cell (TG-FTIR), in comparison. Compound 1 releases first but very slowly some of the included ammonia till 170 °C, then simultaneously ammonia (NH₃) and sulphur dioxide (SO₂) from 175 to 225 °C, whilst the evolution of SO₂ from thiosulfate ligands continues in several overlapping stages until 410 °C, and is escorted by explicit exothermic heat effects at around 237, 260, 358 and 410 °C. The former two exothermic DTA-peaks correspond to the simultaneous degradation and air oxidation processes of excess thiosulfate anions not reacted by formation of copper sulfides (both digenite, Cu_1.8S and covellite, CuS, checked by XRD) and sodium sulfate, while the last two exothermic peaks are accompanied also by considerable mass gains, as the result of two-step oxidation of copper sulfides into various oxosulfates. The mass increase continues further on until 580 °C, when the sample mass begins to decrease slowly, as a continuous decomposition of the intermediate copper oxosulfates, indicated also by re-evolution of SO₂. At 1,000 °C, a residual mass value of 64.3% represents a stoichiometric formation of Cu^IIO and anhydrous Na₂SO₄.     

Polyoxometalates–Directed Assembly of Inorganic–Organic Hybrid Compounds with Copper Multinuclear Nano-cluster Based on Flexible Double Tetrazole-based Thioether

Two new inorganic–organic hybrid compounds constructed from different polyoxometalates (POMs) and copper multinuclear clusters, [Cu(bmte)(H₂Mo₈O₂₆)_0.5]·3H₂O (1) and [Cu₃(bmte)₃(HSiMo₁₂O₄₀)]·H₂O (2) (bmte = 1,2-bis(1-methyl-5-mercapto-1,2,3,4-tetrazole)ethane), have been synthesized under hydrothermal conditions with a flexible double tetrazole-based thioether and characterized by IR, TG and single-crystal X-ray diffraction analyses. In compound 1, two bmte ligands chelate two Cu^I ions with three N atoms to form a binuclear nano-scale subunit [Cu₂(bmte)₂]²⁺, then the binuclear Cu^I subunits are connected by [Mo₈O₂₆]⁴⁻ anions to build a one dimensional (1D) chain. In compound 2, a trinuclear nano-scale subunit [Cu₃(bmte)₃]³⁺ constructed from three Cu^I ions and three bmte ligands has been obtained, and the adjacent trinuclear subunits are linked by [SiMo₁₂O₄₀]⁴⁻ anions to form a “zipper” 1D chain. The adjacent chains of the title compounds are ultimately extended into 2D layers by hydrogen bonds between bmte and POMs. The structural difference of the two compounds indicates that the POMs play an important structure-directed role on the final networks. In addition, the electrochemical behavior of 2-modified carbon paste electrode (2-CPE) and its electrocatalytic reduction of nitrite have been discussed.     

Solvent effect on the photogeneration of singlet molecular oxygen by copper tetra(tert-butyl)phthalocyanine

The photogeneration of the singlet molecular oxygen (¹O₂) by copper tetra(4-tert-butyl) phthalocyanine in organic solvents of different nature was substantiated. The apparent quantum yields of ¹O₂in benzene and pyridine were determined. The data obtained indicate an influence of the coordinating properties of the solvent on the ¹O₂yield. However, this factor is not “critical” as in the case of photogeneration of ¹O₂by copper tetra(5-tert-butylpyrazino)porphyrazine.     

A new flow-type cell by the application of magnetic microfluidic chip

Using a magnetically formed channel called a magnetic channel, a new flow-type cell is proposed. The magnetic channel consists of magnetic walls that are formed by heterogeneous distributions of magnetic flux density around a ferromagnetic track under a magnetic field. The magnetic wall separates the paramagnetic oxidant solution from the diamagnetic reductant solution at a liquid–liquid interface without any solid membranes. In the magnetic channel formed on the cathode, the oxidant solution flows in a quasi-frictionless mode. The anode is placed in the reductant solution surrounding the magnetic channel. Such a geometrical configuration between the oxidant and reductant solutions is interchangeable depending on the magnetism of the solutions. To examine this concept, a Daniel cell system was adopted, where the copper ion in copper sulfate solution is employed as the oxidant and the zinc atom of zinc electrode as the reductant. The copper ion is paramagnetic, so that 1 mol dm⁻³ copper sulfate solution is injected into the magnetic channel formed on the copper cathode. Zinc sulfate solution (1 mol dm⁻³; diamagnetic) together with the zinc anode are placed surrounding the magnetic channel. The performance of this flow-type battery was examined up to a current density of 22 mA cm⁻². This paper was presented at the International Symposium on Magneto-Science 2005, Yokohama, 2005. Contribution to the special issue “Magnetic Field Effects in Electrochemistry.”     

Galvanic synthesis of copper selenides Cu2 − x Se and CuSe in alkaline sodium selenosulfate aqueous solution

Spherical copper selenide nanoparticles (NPs) were prepared by a simple reaction of sodium selenosulfate with metal copper at room temperature in alkaline Na₂SeSO₃ aqueous solution. It is a galvanic process that operates on a coupled anodic copper oxidation and selenosulfate reduction. 1-Thioglycerol is found to catalyze this reaction. With gold and graphite as the positive electrodes, nanocrystallites of nonstoichiometric copper selenide (Cu_2 − x Se) and stoichiometric copper selenides (CuSe) were produced, respectively. The XRD study shows that the produced CuSe and Cu_2 − x Se are in the pure hexagonal phase and clausthalite phase, respectively. Transmission electron microscopy images show that the diameters of the produced CuSe and Cu_2 − x Se NPs are in the range of 10∼20 and 5∼15 nm, respectively.     

Cuprous oxide nanospheres as probes for light scattering imaging analysis of live cells and for conformation identification of proteins

A facile solution-phase synthesis route of highly uniform Cu₂O nanospheres (Cu₂O NPs) with the size of 57.7 ± 4.7 nm was developed, and then the nanoparticles were applied to live cell imaging under a common dark-field microscope. Starting from copper(II) salts, the synthesis of Cu₂O NPs was made in the presence of cetyltrimethylammonium bromide (CTAB) by reducing the copper(II) with sodium borohydride (NaBH₄) in aqueous medium and by aging process in the air. Monitoring of morphology evolution process of Cu₂O NPs with scanning electron microscopy (SEM) and measuring of the UV-visible spectra showed that the synthesis of Cu₂O NPs follows the reduction-oxidation coupled process of Cu²⁺ into Cu⁰ species at first and then the resulted Cu⁰ species into Cu₂O NPs in the air. Light scattering (LS) features have been measured with a common spectrofluorometer and a common dark-field microscope, and it was found that the as-prepared Cu₂O NPs display strong blue scattering light and can be applied for cell imaging. If incubated with human bone marrow neuroblastoma, transferrin-conjugated Cu₂O NPs can get into the cells and show strong pure blue light in cytoplasm. Further investigations showed that the Cu₂O NPs could be applied for probes for conformation of proteins.     

Copper Sulfide Nanoparticles with Phospholipid‐PEG Coating for In Vivo Near‐Infrared Photothermal Cancer Therapy

In this work, small sizes of hydrophobic copper sulfide nanoparticles (CuS NPs, ～3.8 nm in diameter) have been successfully prepared from the reaction of copper chloride with sodium diethyldithiocarbamate (SDEDTC) inside a heated oleylamine solution. These CuS NPs displayed strong absorption in the 700–1100 nm near‐infrared (NIR) region. By coating CuS NPs with DSPE‐PEG2000 on the surface, the as‐synthesized CuS@DSPE‐PEG NPs exhibited good water solubility, significant stability and biocompatibility, as well as excellent photothermal conversion effects upon exposure to an 808 nm laser. After intravenous administration to mice, the CuS@DSPE‐PEG NPs were found to passively target to the tumor site, and tumor tissues could be ablated efficiency under laser irradiation. In addition, CuS@DSPE‐PEG NPs do not show significant toxicity by histological and blood chemistry analysis, and can be effectively excreted via metabolism. Our results indicated that CuS@DSPE‐PEG NPs can act as an ideal photothermal agent for cancer photothermal therapy.     

Fluorescence properties of nanosized sulfides

The absorption spectra of nanosized sulfides and selenides (ZnS, CdS, CuS, Cu₂S, AgS, In₂S₃, SnS, PbS, Sb₂S₃, FeS, CoS, NiS, CdSe, and Ag₂Se) showed one absorption band with a maximum at wave-lengths shorter than 300 nm. The UV fluorescence spectra of all of these nanosized sulfides in a polyvinyl alcohol film contained maxima at 380–440 nm. Nanosized sulfides are thus characterized by a very large (up to 15000 cm⁻¹) Stokes shift of fluorescence. In a polyvinyl alcohol film, a decrease in the concentration of cadmium sulfide from 0.05 to 0.002 M led to a threefold increase in the fluorescence intensity. The dependence of the degree of fluorescence buildup on the sulfide concentration is nearly linear. An increase in sulfide concentration to more than 5 × 10⁻³ M in solution led to a complete coagulation of particles.     

Probe—detektor-anordnungen zur Kernstrahlungsmessung für Analytische Zwecke

The “analytical power” of detection systems is investigated, considering typical arrangements in analytical terms. From N atoms of interest in a sample Z counts are drawn: Z=R N (R registration yield). Crude data ZM contain also background U generated by interferences: ZM=Z+U. Identification and separation of Z is accompanied by errors ~σ_MU^1/2 due to imperfect distinguishability and to statistical error (σ_M model inherent factor). With “selectivity”=σ_M ^- (R/R_interference)^1/2 the figure of merit is G=selectivity efficiency/interference)^1/2. Sample background dominating, “interference” or both “interference” and “efficiency” have to be cancelled. Present semiconductor spectrometry of low energy γ-quanta and of large rates is not very far from its limits. Further progress will be obtained by enhancement of high energy efficiency and reduction of natural background.      

An Easy Process to Prepare a Copper(I)/Copper Sulfide Electrode and Its Behavior in Alkalimetric Titrations

Abstract

A copper sulfate (Cu₂S) film is formed on the surface of a copper wire by immersion in melted (>55°C) sodium thiosulfate, Na₂S₂O₃·5H₂O. This Cu₂S/Cu electrode is sensitive to sulfide ions and can be used in potentiometric titration of Na₂S solutions with copper(II) cations. Besides, as a novelty, it gives a good response to H⁺ cations at a wide pH range, even in alkaline medium, as checked in potentiometric titration of acetic and phosphoric acids. An analysis of a number of potentiometric measurements leads to interpretation of the electrode response in acidic/basic medium.     

Synthesis of CuS and ZnO/Zn(OH)2 nanoparticles and their evaluation for in vitro antibacterial and antifungal activities

In this study, the copper sulfide nanoparticles (CuS‐NPs) and the zinc oxide/zinc hydroxide nanoparticles ((ZnO/Zn(OH)₂‐NPs) were synthesized by a simple and low‐cost method, and the synthesized nanoparticles were characterized and identified by UV–Vis, field emission scanning electron microscopy (FE‐SEM), transmission electron microscopy (TEM) and X‐ray diffraction (XRD). The antimicrobial activity of the CuS‐NPs and the ZnO/Zn(OH)₂‐NPs were examined by broth dilution to determine the minimal inhibitory concentration (MIC) of antibacterial agent required to inhibit the growth of a pathogen and the minimum bactericidal concentration (MBC) required to kill a particular bacterium. Agar disc diffusion method was used to determine the zone of inhibition. The nanoparticles demonstrated potent antibacterial activity against Klebsiella pneumonia (ATCC 1827), Acinetobacter baumannii (ATCC 150504), Escherichia coli (ATCC 33218) and Staphylococcus aureus (ATCC 25293). Antifungal activity against Aspergillus oryzae (PTCC 5164) was also obtained. The data obtained from antimicrobial activities by broth dilution and agar disc diffusion methods exhibited the CuS‐NPs were more effective than the ZnO/Zn(OH)₂‐NPs. A good correlation was observed between the data obtained by both methods.     

Investigation of the interaction between Co sulfide coatings and Cu(I) ions by cyclic voltammetry and XPS

The interaction between the Co sulfide coating formed on a glassy carbon electrode and Cu(I)-ammonia complexes solution was investigated by cyclic voltammetry in 0.1 M KClO₄, 0.1 M NaOH and 0.05 M H₂SO₄ solutions. It was determined that, after treating the cobalt sulfide coating formed by two deposition cycles with Cu(I)-ammonia complexes (0.4 M, pH 8.8–9.0, τ=180 s, T=25±1°C), an exchange occurs between the coating components and Cu(I). Copper(I) substitutes 75% of the Co(III) compounds present in the coating (~1.81×10^–7 mol cm^–2) because of Cu₂O (1.36×10^–7 mol cm^–2) formation. The rest of the Co(II) and Co(III) sulfide compounds are also replaced by copper with formation of Cu_{2– x} S with a stoichiometric coefficient close to 2 (~1.9). After modifying the cobalt sulfide coatings with Cu(I) ions, the total amount of metal (Co+Cu) increases, owing to the sorption of Cu(I) compounds. In addition, the number of deposition cycles decreases from 3 to 1.5 [1 cycle involves cobalt sulfide layer formation and 0.5 cycle is attributed to modifying by Cu(I) ions]. The coatings modified in the above-mentioned manner may be successfully used for plastic electrochemical metallization as Cu_{2– x} S coatings formed by three deposition cycles. Electronic Publication