Comparison of high-performance liquid chromatography and high-performance capillary electrophoresis for the determination of cicletanine in plasma.

A sensitive and selective high-performance capillary electrophoresis (HPCE) procedure was developed for the determination of total cicletanine in human plasma. The procedure consisted in extraction of the drug with diethyl ether and analysis by micellar electrokinetic capillary chromatography in a fused-silica capillary using sodium dodecyl sulphate in the run buffers and ultraviolet detection. The concentrations of cicletanine obtained by this method were compared with those obtained by a high-performance liquid chromatographic (HPLC) method used routinely. The within-run precision of the methods, expressed as relative standard deviation, ranged from 1.6 to 7.8% for HPLC and from 6.4 to 11.1% for HPCE. Both methods showed an adequate level of accuracy; the relative errors ranged from 0.02 to 3.25% for HPLC and from 0.21 to 2.90% for HPCE. The HPCE method required less than half the time taken by the HPLC method, making HPCE a useful alternative technique for the routine determination of cicletanine in plasma. Both methods were used to follow the time course of total cicletanine in human plasma after a single oral therapeutic dose of the drug.     

Analysis of tea components by high-performance liquid chromatography and high-performance capillary electrophoresis

Tea is one of the most popular beverages in the world. The number of reports on the analysis of tea components, especially for catechins, has recently been increasing. We review the recent reports on the analysis of tea components using the analytical methods of high-performance liquid chromatography and high-performance capillary electrophoresis.     

Separation mechanism and determination of flavanones with capillary electrophoresis and high-performance liquid chromatography

To probe separation mechanism and determination with capillary zone electrophoresis (CZE) and liquid chromatography (LC), nine compounds with identical flavanone skeleton were studied. Optimum separation of LC was attained with gradient of acetonitrile and 5mM phosphate buffer (pH 6.9). For CE, electrolyte buffer was 4.5mM SDS in 32mM sodium tetraborate buffer (pH 9.2). The distinguishing feature in this work was successful separation of monohydroxyl stereoisomers by CZE. Polarity is generally increased with hydroxyl groups. In a separation mechanism study, polarity would be reduced by intramolecular hydrogen bond between hydroxyl of C5 and carbonyl group of C4. Comparison of the retention results among monohydroxyl flavanones shows polarity with hydroxyl at C6 the least, and that at C4' and C7 nearly equal. Also, elution order of flavones and flavanones would be adverse due to the hydroxyl at C3 in LC. From the numerical value pK(a) of flavanone, the C7-OH is the smallest, and two hydroxyl groups in an adjacent position is always less than the unique one caused by forming a stable 5-membered ring. Investigation of separation mechanism yield only the effect of constituent but also reasonable explanation for contradictory results between Wulf and our laboratory, this due to the hydroxyl at C3.     

Determination of flavonoids by high-performance liquid chromatography and capillary electrophoresis

The compounds of flavonoid, an important group in nature, can prevent coronary heart disease and anticancer by virtue of the characteristics of antioxidation. Nine flavonoids most often seen in grape wine, namely apigenin, baicalein, naringenin, luteolin, hesperetin, galangin, kaempferol, quercetin, and myricetine, were determined by means of high-performance liquid chromatography (HPLC) and capillary zone electrophoresis (CZE) in this work. A successful resolution was obtained from an unusual additive of tetrahydrofuran in mobile phase by HPLC. One notable thing is that the mixture of luteolin and quercetin could be separated for the first time by HPLC. In addition, the better detection limit was still attainable even with the use of tetrahydrofuran. The detection limits of CZE performed in borate buffer were hundreds-fold better than in previous reports. Furthermore, the retention and migration behavior of the analytes studied were discussed. As the result of this study, the elution order of flavone and flavonone was reversed to the contention proposed by Wulf et al. It was predictable from the interaction with tetrahydrofuran. Consequently, the extracts from grape wine with solid-phase extraction were analyzed by developing methods of HPLC and CZE. The obtained recoveries ranged from 90 to 107% and the relative standard deviations were under 6.3%.     

Separation of stilbenes by capillary electrophoresis and high-performance liquid chromatography

Stilbenes, fluorescence whitening agents (FWAs), are usually added to cleaning agents in household and in industry. Capillary electrophoresis (CE) was often applied to separate various compounds simultaneously for its multinomial advantages. In this paper, we established analytical methods of six diaminostilbenes with CE and ion-pair chromatography (IPC). The optimum mobile phase for IPC was 11.78 mM tetrabutylammonium hydrogen sulfate (TBA) aqueous and acetonitrile. An IPC method has been developed for simple and direct separation for diaminostilbenes, anionic substances, with TBA as ion-pair reagent. Satisfactory linear ranges (7.0 x 10(-3) approximately 3.0 x 10 microg/mL), correlation coefficients (0.9992-0.9999), and detection limits (6-13 ng/mL) were obtained. Separations were also performed by capillary zone electrophoresis (CZE) using a buffer consisting of Tris (pH 10.1), n-tetradecyltrimethylammonium bromide (TTAB) and acetonitrile. A linear range of 5.0 x 10(-1) - 4.0 x 10 microg/mL, correlation coefficients between 0.9975 and 0.9998, and detection limits between 337 and 446 ng/mL were obtained. In particular, the separation of a pair of similar compounds (mass difference of 2) was achieved by addition of TTAB. The optimum analytical methods of CE and high-performance liquid chromatography (HPLC) were applied to commercial household with direct analysis and standard addition. No significant bias were shown between them by t-test at 95% confidence level.     

Quantitation of insulin injection by high-performance liquid chromatography and high-performance capillary electrophoresis.

High-performance capillary electrophoresis (HPCE) was evaluated as a potential technique for the regulatory analysis of commercial dosage forms of insulin. A comparison was made to a liquid chromatographic analysis presently being proposed as an official monograph in the United States Pharmacopeia. The salient points of this comparison were accuracy, precision and ease of use. Both authentic (i.e. single blind, spiked) samples and commercial pharmaceutical formulations (injections) were examined. Chromatographic analyses of both commercial formulations and authentic samples were characterized by good precision, with accuracy being supported by results from authentic (spiked) samples. Conventional HPCE (by which is meant a non-micellar electrolyte used with an uncoated, unmodified fused-silica capillary) achieved reasonable accuracy, but less than impressive precision, when applied to authentic samples. When used for commercial formulations, this type of HPCE did not produce a level of accuracy suitable for regulatory purposes, even with the use of an internal standard.     

Analysis of carbohydrates in glycoproteins by high-performance liquid chromatography and high-performance capillary electrophoresis

We describe two methods for the analysis of oligosaccharide chains in glycoproteins by high-performance liquid chromatography (HPLC) and high-performance capillary electrophoresis (HPCE).O-andN-glycosidically linked oligosaccharides released from glycoproteins can be identified as their borohydride-reduced forms by anion-exchange HPLC with pulsed amperometric detection.N-Glycosidically linked oligosaccharides can also be analyzed as 2-aminopyridine derivatives by HPCE in direct zone electrophoresis mode in an acidic phosphate buffer and zone electrophoresis mode as borate complexes in an alkaline buffer. We also present a convenient procedure for the analysis of the constituent monosaccharides of these oligosaccharides chains by HPLC based on reversed-phase partition mode as 1-phenyl-3-methyl-5-pyrazolone derivatives.     

Comparison between capillary electrophoresis and liquid chromatography for the determination of diclofenac sodium in a pharmaceutical tablet

Two novel analytical methodologies using capillary electrophoresis (CE) and liquid chromatography (LC) were developed and compared for the determination of diclofenac sodium in commercial and simulated tablet formulations. The CE analysis was performed in a bare fused-silica capillary with 75 microm id and total length of 50 cm (28 cm to the detector) with a buffer solution of 20 mM sodium tetraborate, pH 9.23. The applied voltage was 20 kV, and acetaminophen was used as the internal standard (IS). The LC analysis was performed with a LiChrospher 100 RP-18 (5 microm) column and a mobile phase of methanol-diluted glacial acetic acid (0.3 parts in 2500; 75 + 25) at a flow rate of 0.9 mL/min with propylparaben as the IS. In both analyses, detection was by ultraviolet absorption at 276 nm. Under optimized conditions, the CE migration times for the diclofenac sodium standard and acetaminophen (IS) were 2.07 and 1.59 min, respectively, and the LC retention times for the diclofenac sodium standard and propylparaben (IS) were 3.98 and 2.26 min, respectively. The resolution and efficiency for CE were 14.2 and 1.6 x 10(5) plates/m, respectively, and for LC, 5.0 and 8.6 x 10(3) plates/m, respectively. Calibration curves of peak area versus concentration gave correlation coefficients of 0.9992 for CE and 0.9994 for LC. The limits of detection and quantitation were 8.40 and 25.46 microg/mL, respectively, for CE and 4.60 and 13.93 microg/mL, respectively, for LC. Coefficients of variation were 1.68 and 0.37% for CE and LC, respectively. Average recoveries obtained with CE and LC were 103.12+/-0.90 and 99.59+/-0.21%, respectively. Although both methodologies were shown to be suitable for the determination of diclofenac sodium in tablets, performing in a similar manner with regard to several aspects (linearity, recovery, and specificity), CE provided faster analysis and better column efficiency, whereas LC provided superior repeatability and sensitivity.     

Cross validation of capillary electrophoresis and high-performance liquid chromatography for cefotaxime and related impurities

Summary A micellar electrokinetic chromatography method is presented which permits separation of cefotaxime and its major related impurities. Separation was carried out at 15 kV, using 30 mM sodium dihydrogen phosphate adjusted to pH 7.2 with 5 M NaOH and which contained 165 mM sodium dodecylsulfate as electrolyte. Results obtained by capillary electrophoresis were in good agreement with those of high-performance liquid chromatography with respect to the level of the major known impurities, total impurity content and cefotaxime purity.     

Determination of linear alkylbenzenesulfonates by high-performance liquid chromatography and capillary zone electrophoresis

High-performance liquid chromatography and capillary zone electrophoresis have been used for the separation of homologues and structural isomers of linear alkylbenzenesulfonates with subsequent UV detection. The analytical advantages of these techniques are applied to the analysis of technical products containing high amounts of LAS as well as river water samples with very low LAS concentrations using preconcentration steps.Dedicated to Professor Dr. H. Kriegsmann on the occasion of his 70th birthday     

Comprehensive two-dimensional separations based on capillary high-performance liquid chromatography and microchip electrophoresis

A novel comprehensive two-dimensional (2-D) separation system coupling capillary high-performance liquid chromatography (cHPLC) with microchip electrophoresis (chip CE) is demonstrated. Reversed-phase cHPLC was used as the first dimension, and chip CE acted as the second dimension to perform fast sample transfers and separations. A valve-free gating interface was devised simply by inserting the outlet-end of LC column into the cross-channel on a specially designed chip. A home-made confocal laser-induced fluorescence detector was used to perform on-chip high-sensitive detection. The cHPLC effluents were continuously delivered to the chip and pinched injections of the effluents every 20 seconds were employed for chip CE separation. Gradient elution of cHPLC was carried out to obtain the high-efficiency separation. Free-zone electrophoresis was performed with triethylamine buffer to achieve high-speed separation and prevent sample adsorption. Such a simple-made comprehensive system was proved to be effective. The relative standard deviations for migration time and peak height of rhodamine B in 150 sample transfers were 3.2% and 9.8%, respectively. Peptides of the fluorescein isothiocyanate (FITC)-labeled tryptic digests of bovine serum albumin were fairly resolved and detected with this comprehensive 2-D system.     

Comparison of ion chromatography and capillary electrophoresis for the determination of inorganic ions

The techniques of ion chromatography and capillary electrophoresis are compared as analytical methods for the determination of inorganic anions and cations. Comparison is made in the areas of stage of development, separation efficiency, separation selectivity, analytical performance parameters, method development procedures, applications, strenghts and weaknesses, and future directions. It is shown that the two techniques are complementary rather than competitive, especially with regard to their separation selectivities and the type of applications to which they are most suited.     

High performance separations of nucleic acids using capillary electrophoresis and high-performance liquid chromatography

High resolution separations of nucleic acids have been performed using high performance capillary electrophoresis (HPCE) and high performance liquid chromatography (HPLC). Electropherograms showing HPCE separations of single and double stranded DNA are presented and compared with HPLC separations. Single base resolution of poly(dA) oligonucleotides in the size range of 12 to 60-mers was achieved in 35 min using HPCE. Plate numbers for HPCE are in the hundreds of thousands and reproducibility is about 1–2 % (RSD). In comparison with HPLC separations, the resolution of nucleic acids obtained using HPCE is much better than that using HPLC, while reproducibility of HPCE is comparable with that of HPLC.     

Cyclodextrin-assisted capillary electrophoresis for determination of the cyclic nitramine explosives RDX,HMX and CL-20 comparison with high-performance liquid chromatography

A sulfobutyl ether-beta-cyclodextrin-assisted electrokinetic chromatographic method was developed to rapidly resolve and detect the cyclic nitramine explosives 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaaza-isowurtzitane (CL-20), octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) and hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) and their related degradation intermediates in environmental samples. Development of the electrophoretic method required the measurement of the aqueous solubility of CL-20 which was determined to be 3.59 +/- 0.74 mg/l at 25 degrees C (95% confidence interval, n=3). The performance of the method was then compared to results obtained from existing high-performance liquid chromatography methods including US Environmental Protection Agency method 8330.     

Comparison of capillary electrophoresis and reversed-phase liquid chromatography for determination of the enantiomeric purity of an M3 antagonist

The chiral separation of an M3 antagonist was investigated using capillary electrophoresis (CE) with various sulfated cyclodextrins and by reversed-phase liquid chromatography with derivatized cellulose, derivatized amylose, and two protein stationary phases. Operational parameters for each technique, such as the concentration of the chiral selectors, background electrolyte (or mobile phase) pH and type, organic modifiers, injection mode and temperature were varied in order to achieve a desired elution order and to meet a 0.1% limit of quantitation (LOQ) criteria. Based on the advantages and disadvantages of each technique, a practical CE method using sulfated gamma-cyclodextrin was selected. The method was validated in terms of linearity, LOQ, accuracy, ruggedness and precision.     

Comparison of isotachophoresis, capillary zone electrophoresis and high-performance liquid chromatography for the determination of salbutamol, terbutaline sulphate and fenoterol hydrobromide in pharmaceutical dosage forms

Reversed-phase high-performance liquid chromatography (RP-HPLC), isotachophoresis (ITP) and capillary zone clectrophoresis (CZE) were applied to the determination of salbutamol, terbutaline sulphate and fenoterol hydrobromide in commercially available pharmaceutical dosage forms. The comparison showed that especially with the use of ITP, high concentrations of other charged sample components can disturb the separation process. If special attention is paid to ensure a complete separation, all methods give comparable results. For the regression lines of the calibration graphs, regression coefficients of at least ca. 0.999 and nearly zero intercepts are obtained with relative standard deviations of ca. 1–2% for peak area or zone lengths. By applying the different techniques, often different components of the sample matrix can be detected, i.e., a more complete impression of the sample composition can be obtained by using all the three techniques.     

Comparison between micellar liquid chromatography and capillary zone electrophoresis for the determination of hydrophobic basic drugs in pharmaceutical preparations

The determination of highly hydrophobic basic compounds by means of conventional reversed-phase liquid chromatographic methods has several drawbacks. Owing to the characteristics of micellar liquid chromatography (MLC) and capillary electrophoresis (CE), these techniques could be advantageous alternatives to reversed-phase chromatographic methods for the determination of these kinds of compounds. The objective of this study was to develop and compare MLC and CE methods for the determination of antipsychotic basic drugs (amitryptiline, haloperidol, perphenazine and thioridazine) in pharmaceutical preparations. The chromatographic determination of the analytes was performed on a Kromasil C(18) analytical column; the mobile phase was 0.04 m cetyltrimethylammonium bromide (CTAB), at pH 3, containing 5% 1-butanol, at a flow rate of 1 mL/min. The CE separation was performed in a fused-silica capillary with a 50 mm tris-(hydroxymethyl)-aminomethane buffer, pH 7, at an applied voltage of 20 kV, using barbital as internal stardard. The proposed methods are suitable for a reliable quantitation of these compounds in the commercial tablets and drops in terms of accuracy and precision and require a very simple pre-treatment of the samples. By comparing the performance characteristics and experimental details of the MLC and CE methods we conclude that CE seems to be slightly better than MLC in the determination of highly hydrophobic compounds in pharmaceuticals in terms of resolution and economy, taking into account that the limits of detection are not a handicap in pharmaceutical samples.     

Comparison between transient isotachophoretic capillary zone electrophoresis and reversed-phase liquid chromatography for the determination of peptides in plasma.

Low levels of peptide drugs in human plasma can be determined employing off-line solid-phase extraction, followed by capillary zone electrophoresis with UV detection. A bioanalytical procedure is presented, using gonadorelin and angiotensin II in human plasma as model compounds. The solid-phase extraction method, based on a weak cation exchange mechanism, is able to remove interfering endogenous components from the plasma sample, extract the model peptides quantitatively, and give a possibility of concentrating the sample at the same time. Transient isotachophoretic conditions were kept to increase the sample loadability by about two orders of magnitude. Up to about 70% of the capillary was filled with the reconstituted extract, whereafter the peptides were selectively concentrated during the first 15 min. Subsequently, the concentrated sample zones were separated under capillary zone electrophoresis conditions, showing the technique's high resolution. For the model cationic peptides (gonadorelin, angiotensin II) good linearity and reproducibility was observed in the 20-100 ng/mL concentration range. A more extensive washing procedure permits quantitation of gonadorelin at the 5 ng/mL level. In comparison with a liquid chromatography analysis, superior mass sensitivity and separation are obtained with the transient isotachophoretic capillary zone electrophoresis method. Moreover, in this case equivalent sensitivity is achieved when it is directly compared with a liquid chromatography method with UV detection, keeping in mind that 60 times more sample is needed for the latter method. A further gain in sensitivity can be obtained when the analysis is combined with native fluorescence detection, as is demonstrated by combining liquid chromatography separation with fluorescence detection.     

Development and validation of capillary zone electrophoresis and high-performance liquid chromatography methods for the determination of oral anticoagulant edoxaban in pharmaceutical tablets

The incidence of thrombotic complications in SARS-CoV-2 infections has become a global concern; thus, anticoagulants are an integral part of the treatment. Edoxaban (EDX) is an oral anticoagulant suitable for pharmacologic thromboprophylaxis. Herein, two novel analytical methods for EDX determination in tablets are developed and validated using capillary zone electrophoresis (CZE) and high-performance liquid chromatography (HPLC). Operating conditions such as the electrolyte's concentration and pH value, injection time, volume, and the capillary temperature, were optimized. The methods were successfully validated by establishing the linearity, intra- and inter-day precisions (relative standard deviation [%]), accuracy, and robustness. Adequate separation of excipients and degradation products of EDX generated by stress degradation conditions demonstrated the stability-indicating capability of the methods. The analytical procedures were linear in the range of 25–125 µg/ml (r > 0.999), with the limits of detection and quantification of 3.26 and 10.87 µg/ml for CZE and 0.740 and 2.78 µg/ml for HPLC. Although both methodologies are suitable for determining EDX in tablets, CZE provides a greener alternative due to low-cost analysis using less organic solvents and minimizing waste generation.