The speciation of rhodium(III) in hydrochloric acid media by capillary zone electrophoresis

A fast and effective method to study the aquation of rhodium(III) chlorocomplex in hydrochloric solutions using capillary zone electrophoresis (CZE) is developed. At least five species, some of which seem to be oligomeric, are formed in solution during the aquation process at pH>1. The fast hydration of RhCl₆³⁻ makes this species impossible to detect. The first species detected in the optimised conditions is RhCl₅(H₂O)²⁻ although RhCl₄(H₂O)₂⁻ is the main species during the first stage of the aquation process. When equilibrium is reached either RhCl₃(H₂O)₃ or a cationic complex, RhCl₂(H₂O)₄⁺, is formed as the main species. Matrix Assisted Laser Desorption Ionisation Time of Flight Mass Spectrometry (MALDI-TOF MS) is used as a novel technique to elucidate the structure of the rhodium aqua/chloro complexes formed in solution. Results obtained by CZE are confirmed by spectrophotometry.     

Rhodium phosphine complexes immobilized on silica as active catalysts for 1-hexene hydroformylation and arene hydrogenation

In immobilizing the rhodium complexes [Rh(acac)(CO)(P)] (1) and [Rh(acac)(P)₂] (2) (P = Ph₂PCH₂CH₂Si(OMe)₃) onto SiO₂, acetylacetone is found to be released through protonation of the acac ligand by the acidic silica-OH groups. The resulting complexes [Rh(O-{SiO₂}(HO-{SiO₂})(CO)(P-{SiO₂})] (1a) and [Rh(O-{SiO₂})(HO-{SiO₂})(P-{SiO₂})₂] (2a) were successfully tested with respect to their catalytic action on 1-hexene hydroformylation as well as benzene and toluene hydrogenation. The reaction outcome, viz. the formation of aldehydes versus isomerization, depends strongly on the presence and concentration of a phosphine co-catalyst. Thus, while 1a gave only a 17% yield of aldehyde in the absence of phosphines, the yield is increased to 54% in the presence of phosphinated silica P-{SiO₂} or even 94% if PPh₃ is added to the solution. Without extra added phosphine, both 1a and 2a effect mainly the isomerization of 1-hexene to 2-hexene. Pre-catalyst 1a catalyzes also the hydrogenation of benzene at 10.5 atm H₂ and 90 °C to give cyclohexane with a TOF of 608 h⁻¹.     

化学气相沉积法制备α-Fe_2O_3薄膜及其性能测试——推荐一个材料化学实验

以配合物乙酰丙酮铁为前驱体,利用超声雾化的方法进行化学气相沉积制备α-Fe2O3薄膜,并对其结构和性能进行测试表征。     

Simultaneous separation of inorganic anions and cations by capillary zone electrophoresis

A new capillary electrophoretic approach for simultaneous separation of fast anions and cations is demonstrated. Indirect UV detection at 214 nm in conjunction with electromigration sampling from both ends of the capillary was developed. Two electrolyte systems based on imidazole-nitrate and copper(II)-ethylenediamine-nitrate were investigated for the simultaneous separation of chloride, sulphate, hydrocarbonate, potassium, ammonium, calcium, sodium and magnesium ions. Experimental parameters that were evaluated included a nature of UV chromophore, pH of electrolyte, a nature of complexing agent. The method permits the excellent separation of three anions and five cations in only 4 min using electrolyte system containing 2.5 mmol l⁻¹ Cu(NO₃)₂, 5 mmol l⁻¹ ethylenediamine and 1 mmol l⁻¹ fumaric acid at pH 8.5 adjusted with tetraethylammonium hydroxide.     

Self-assembly in dinuclear, cyclic homotetranuclear and cyclic heterotetranuclear complexes with a picolylhydrazone ligand

Reactions among Cu(ClO₄)₂ · 6H₂O, Cu(acac)₂/VO(acac)₂ and 3-methoxysalicylaldehyde Picoloylhydrazone in different solvents give three complexes, [Cu₂L(acac)(H₂O)₂]ClO₄ (1), [Cu₄L₂(acac)₂(py)₂](ClO₄)₂ (2) and (VO₂)₂L₂Cu₂(acac)₂ (3) (acac = acetyl acetonate and py = pyridine). There is an extended 2D structure in complex 1 constructed by hydrogen bonds between the binuclear complex cation and the ClO₄⁻ anion, and an extended 1D structure in complex 2 constructed by weak ππ stacking interactions between neighboring cyclic tetranuclear complex molecules. Complex 3 is the first oxovanadium–copper complex with a bridging oxo oxygen atom between the V atom and the Cu atom. The solid-state photoluminescent properties of the three title complexes have been studied. There is an antiferromagnetic interaction in 1.     

Homo- and hetero-bridged mixed-valence dinuclear complexes which contain the fragment ‘Rh(C6F5)3’

The reaction of the anionic mononuclear rhodium complex [Rh(C₆F₅)₃Cl(Hpz)]^t- (Hpz = pyrazole, C₃H₄N₂) with methoxo or acetylacetonate complexes of Rh or Ir led to the heterodinuclear anionic compounds [(C₆F₅)₃Rh(μ-Cl)(μ-pz)M(L₂)] [M = Rh, L₂ = cyclo-octa-1,5-diene, COD (1), tetrafluorobenzobarrelene, TFB (2) or (CO)₂ (4); M = Ir, L₂ = COD (3)]. The complex [Rh(C₆F₅)₃(Hbim)]⁻ (5) has been prepared by treating [Rh(C₆F₅)₃(acac)]⁻ with H₂bim (acac = acetylacetonate; H₂bim = 2,2′-biimidazole). Complex 5 also reacts with Rh or Ir methoxo, or with Pd acetylacetonate, complexes affording the heterodinuclear complexes [(C₆F₅)₃Rh(μ-bim)M(L₂)]⁻ [M = Rh, L₂ = COD (6) or TFB (7); M = Ir, L₂ = COD (8); M = Pd, L₂ = η³-C₃H₅ (9)]. With [Rh(acac)(CO)₂], complex 5 yields the tetranuclear complex [{(C₆F₅)₃Rh(μ-bim)Rh(CO)₂}₂]₂₋. Homodinuclear Rh^III derivatives [{Rh(C₆F₅)₃}₂(μ-L)₂]^·- [L₂ = OH, pz (11); OH, S^tBu (12); OH, SPh (13); bim (14)] have been obtained by substitution of one or both hydroxo groups of the dianion [{Rh(C₆F₅)₃(μ-OH)}₂]²⁻ by the corresponding ligands. The reaction of [Rh(C₆F₅)₃(Et₂O)_x] with [PdX₂(COD)] produces neutral heterodinuclear compounds [(C₆F₅)₃Rh(μ-X)₂Pd(COD)] [X = Cl (15); Br (16)]. The anionic complexes 1–14 have been isolated as the benzyltriphenylphosphonium (PBzPh₃⁺) salts.     

The beryllium dimer potential

The convergence of ab initio calculations of the beryllium dimer potential is examined with several basis sets orders of perturbation theory. When the atomic pair natural orbital basis set calculations are extrapolated to the complete basis set and full CI limits, the calculated parameters: R_e=2.447 Å, D_e=827 cm⁻¹, ν₀₁=212.7 cm⁻¹, ν₁₂=167.2 cm⁻¹, ν₂₃=121.5 cm⁻¹ and ν₃₄=77.7 cm⁻¹ are in good agreement with the experimental parameters: R_e=2.45 Å, D_e=839±10 cm⁻¹, ν₀₁=223.2 cm⁻¹, ν₁₂=169.7 cm⁻¹, ν₂₃=122.5 cm⁻¹, and ν₃₄=79 cm⁻¹.     

Synthesis and Luminescent Properties of Iridium Complexes with Reduced Concentration Quenching Effect

Three novel cyclometalated ligands 1-benzyl-2-phenyl-1H-benzoimidazole(BPBM), 1-(4-methoxy-benzyl)-2-(4-methoxy-phenyl)-1H-benzoimidazole(MBMPB) and 4-[2-(4-dimethylamino-phenyl)-benzoinidazol-1-ylmethyl]-phenyl-dimethyl-amine(DBPA) were designed and synthesized, and the corresponding highly efficiency green-emitting phosphorescent iridium complexes Ir(BPBM)₂(acac)(1), Ir(MBMPB)₂(acac)(2) and Ir(DPBA)₂(acac) (3) with acetylacetone(acac) as auxiliary ligand were also synthesized. The ligands are functionalized by bulky non-planarity substituents, thus the phosphorescent concentration quenching is substantially suppressed, and all the complexes exhibit bright photoluminescence(PL) in solid state. The photo-physical properties of the three iridium complexes were researched in detail. The results indicate that they have potential application in fabricating non-doped electrophosphorescence device.     

Formation, solution structure and reactivity of alkylperoxo complexes of titanium

A detailed in situ ¹³C and ¹H NMR spectroscopic characterization of the following families of alkylperoxo complexes of titanium is presented: Ti(η²-OOtBu)_n(OiPr)_4−n, where n = 1–4; binuclear complexes [(iPrO)₃Ti(μ-OiPr)₂Ti(OiPr)₂(η²-OOtBu)] and [(η²-OOtBu)(iPrO)₂Ti(μ-OiPr)₂Ti(OiPr)₂(η²-OOtBu)]; complexes with β-diketonato ligands: Ti(LL)₂(OEt)(η²-OOtBu), Ti(LL)₂(OiPr)(η²-OOtBu), Ti(LL)₂(η²-OOtBu)₂, Ti(LL)₂(OtBu)(η¹-OOtBu), where HLL = acetylacetone, dipivaloylmethane. These alkylperoxo complexes could not be isolated due to their instability and were studied in situ at low temperatures. Whereas the side-on (η²) coordination mode of tert-butylperoxo ligand is generally preferable, the end-on (η¹) coordination caused by spatial hindrance from surrounding bulky ligands is found in two cases. The quantitative data on the reactivity of alkylperoxo complexes found towards sulfides and alkenes were obtained. The system TiO(acac)₂/tBuOOH in C₆H₆ was reinvestigated using ¹³C and ¹H NMR spectroscopy. The structure of the complex Ti(acac)₂{CH₃C(O)(OOtBu)COO} actually formed in this system was elucidated. Four types of titanium(IV) alkylperoxo complexes were detected in the Sharpless–Katsuki catalytic system using ¹³C NMR spectroscopy.     

Synthesis, crystal structure and third-order non-linear optical property of heterobimetallic cluster compound [MoOICu3S3(2,2′-bipy)2]

Nest-shaped cluster [MoOICu₃S₃(2,2′-bipy)₂] (1) was synthesized by the treatment of (NH₄)₂MoS₄, CuI, (n-Bu)₄NI, and 2,2′-bipyridine (2,2′-bipy) through a solid-state reaction. It crystallizes in monoclinic space group P2₁/n, a=9.591(2) Å, b=14.820(3) Å, c=17.951(4) Å, β=91.98(2)°, V=2549.9(10) ų, and Z=4. The nest-shaped cluster was obtained for the first time with a neutral skeleton containing 2,2′-bipy ligand. The non-linear optical (NLO) property of [MoOICu₃S₃(2,2′-bipy)₂] in DMF solution was measured by using a Z-scan technique with 15 ns and 532 nm laser pulses. The cluster has large third-order NLO absorption and the third-order NLO refraction, its ₂ and n₂ values were calculated as 6.2×10⁻¹⁰ and −3.8×10⁻¹⁷ m² W⁻¹ in a 3.7×10⁻⁴ M DMF solution.     

Synthesis of novel platinum-silver and platinum-copper complexes with bridging alkynyl ligands

The study of the reactivity of [Pt₂M₄(CCR)₈] (M=Ag or cu; R=Ph or ^tBu) towards different neutral and anionic ligands is reported. This study reveals that reactions of the phenylacetylide derivatives [Pt₂M₄(CCPh)₈] with anionic, X⁻ (X=Cl or Br) or neutral donors (CN^tBu or py) in a molar ratio 1:4 (m/donor ratio 1:1) yield the trinuclear anionic (NBu₄)₂[{Pt(CCPh)₄ (MX)₂] (M=Ag or Cu, X =Cl or Br) or neutral [{Pt(CCPh0₄=sAGL)₂] (L=CN^tBu or py) complexes, respectively. The crystal structure of (NBu₄)₂[{Pt(CCPh)₄}(CuBr)₂](4) shows that the anion is formed by a dianionic Pt(CCPh)₄ fragment and two neutral CuBr units joined through bridging alkynyl ligands. All the alkynyl groups are σ bonded to Pt and η²-coordinated to a Cu atom which have an approximately trigonal-planar geometry. By contrast, similar reactions with [Pt₂M₄(CC^tBu)₈] (molar ratio M/donor 1:1) afford hexanuclear dianionic (NBu₄)₂[Pt₂M₄(CC^tBu)₈X₂] or neutral [Pt₂Ag₄(CC^tBu0₈Py₂]. Only by treatment with a large exces of Br ⁻ (molar ratio M/Br⁻ 1:2) are the trinuclear complexes (NBu₄)₂[{Pt(CC^tBu₄ (MBr)₂] (M=Ag, Cu) obtained. Attempted preparations of analogous complexes with phosphines (L′=PPh₃ or PEt₃) by reactions of [Pt₂M₄(CCR₈] with L′ leads to displacement of alkynyl ligands from platinum and formation of neutral mononuclear complexes [trans-Pt(CCR)₂L′₂].     

Isotopic exchange reactions between iron-sulphur-nitrosyl clusters and nitrite

The anion [Fe₄S₃(NO)₇]⁻ undergoes slow exchange with labelled nitrite [¹⁵NO₂]⁻ to yield a product [Fe₄S₃(¹⁴NO)(¹⁵NO)₆]⁻ in which complete isotopic exchange has occurred at the basal Fe(NO)₂ groups, but with no exchange at the apical Fe(NO) group. The neutral Fe₄S₄(NO)₄ reacts rapidly with [¹⁵NO₂⁻ to give fully exchanged [Fe₄S₃(¹⁵NO)₇]⁻, and it is proposed that the conversion proceeds by fragmentation, followed by complete isotopic exchange and rapid reassembly. The binuclear anion [Fe₂S₂(NO)₄]²⁻ also yields, with [¹⁵NO₂]²⁻ in CD₂Cl₂ solution, the fully exchanged [Fe₄S₃(¹⁵NO)₇]⁻, and a mechanism involving successive fragmentation, exchange and reassembly steps is proposed; however in aqueous solution, a clean exchange reaction occurs to give [Fe₂S₂(¹⁵NO)₄]²⁻. Neutral binuclear esters Fe₂(SR)₂(NO)₄ (R = Me, Et, or Ph) with [¹⁴NO₂]⁻ yield the mononuclear paramagnetic [Fe(¹⁴NO)₂(¹⁴NO₂)₂]⁻, and with [¹⁵NO₂]⁻ the analogous [Fe(¹⁵NO)₂(₁₅NO₂)₂]⁻.     

Potential of Capillary Electrophoresis for the Profiling of Propolis

The usefulness of capillary electrophoresis (CE) with diode array detection for the profiling of Propolis, a hive product, is investigated. Water extracts of Propolis were analyzed with both capillary zone electrophoresis (CZE) at pH 7.0 and 9.3, and micellar electrokinetic chromatography (MEKC) with sodium dodecyl sulfate at pH 9.3. Characteristic profiles were obtained and several organic acids and preservatives could be identified by means of library comparison of the recorded UV spectra combined with addition of reference compounds to the extracts. The selectivity of the CZE and MEKC system differed considerably but the information obtained with both methods was similar. The dry residues of the water extraction were extracted with ethanol-water (70 : 30, v/v) and analyzed with the MEKC system to enable the separation of the more hydrophobic constituents of the Propolis samples. Complex profiles containing various well separated peaks were obtained allowing the identification of some interesting flavonoids. On the basis of the recorded CZE and MEKC profiles, the Propolis samples could be divided into two clearly different groups which are probably from a different origin.     

Determination of trace amounts of beryllium using derivative spectrophotometry in non-ionic micellar medium

A rapid and sensitive method for the trace level determination of beryllium based on the formation of a 1:2 complex (λ_max 560 nm) with 1,4-dihydroxy-9,10-anthracenedione in an aqueous medium containing Triton X-100 is reported. Beer’s law is followed in the range 3.60–360 ng ml⁻¹ of Be(II). The molar absorptivity and Sandell’s sensitivity are 1.68×10⁴ l mol⁻¹cm⁻¹ and 0.54 ng cm⁻², respectively; detection limit is 0.23 ng ml⁻¹ of Be(II). Analysis of synthetic mixtures of composition similar to that of alloys and spiked samples of distilled water, gave results that are in agreement with their beryllium content.     

Übergangsmetall-carbin-komplexe : LXXXIII. Neue anionische mer-dihalogeno-tricarbonyl-dialkylamino-carbin-komplexe des wolframs

The reaction of trans-X(CO)₄WCNR₂ (X = Br, R = ^c hex (cyclohexyl); X = Cl, R = ^c hex, ⁱpr (isopropyl) with M⁺X⁻ (M⁺ = NEt₄⁺, X⁻ = Br⁻; M⁺ = PPN⁺, X⁻ = Cl⁻) leads under substitution of one CO ligand to new anionic dihalo(tricarbonyl)carbyne-tungsten complexes of the type M⁺ mer-[(X)₂(CO)₃WCNR₂]⁻ (M⁺ = NEt₄⁺, X = Br, R = ^c hex; M⁺ = PPN⁺, X = Cl, R = ^c hex, ⁱ pr), whose composition and structure were determined by elemental analysis as well as by IR, ¹H and ¹³C NMR spectroscopy. In the anionic carbyne complexes the entered halogen ligand, coordinated in a cis position relative to the carbyne ligand on the metal, can be easily substituted by neutral nucleophiles, as the reaction of PPN⁺ mer-[(Cl)₂(CO)₃WCN^chex₂]⁻ with PPh₃ demonstrates yielding the neutral carbyne complex mer-[Cl(CO)₃(PPh₃)WCN^chex₂].     

Profiling and screening analysis of 27 aromatic amino acids by capillary electrophoresis in dual modes

An efficient capillary electrophoretic (CE) profiling and screening system based on dual modes of capillary zone electrophoresis (CZE) and micellar electrokinetic capillary chromatography (MEKC) was developed for the simultaneous determination of 23 nonprotein amino acids (NPAAs) and 4 protein amino acids with aromatic moiety. It involves separation by an uncoated fused-silica capillary under phosphoric acid buffer in CZE mode and by another uncoated fused-silica capillary under neutral sodium dihydrogen phosphate buffer containing sodium dodecyl sulfate in MEKC mode. Migration orders of the amino acids studied on the two separation modes under each optimum condition were very different. The repeatability of migration times measured by the CZE and MEKC was found to be better than 4.8 and 3.4%, respectively, thereby enabling to cross-check the identification of each amino acid. The method linearity and limit of detection of the CZE for each amino acid were found to be adequate for the assay of aromatic amino acids. When the present CE profiling and screening analysis in dual modes was applied to plant seeds, NPAAs such as mimosine from Mimosa pudica Linné, and 2-phenylglycine from Lindera erythrocarpa Makino were positively detected along with tryptophan, phenylalanine and tyrosine.     

固相配位化学反应研究(LXVII)─固－固相反应合成混配化合物

室温或近室温条件下,Co(acac)₂(H₂O)₂与第二配体2,2'-联吡啶、1,10-啡啰啉、8-羟基喹啉、水杨醛肟固相反应得到4个混配化合物,经XRD、IR、UV及元素分析表征了这些产物。     

Capillary electrophoretic determination of the constituents of Artemisiae Capillaris Herba

Two capillary electrophoretic methods, a micellar electrokinetic electrophoretic (MEKC) one and a capillary zone electrophoretic (CZE) one, were developed for the separation of 12 constituents in Artemisiae Capillaris Herba. Detection at 254 nm with 20 mM sodium dodecyl sulfate and 20 mM sodium borate buffer (pH 9.82) in MEKC or with 25 mM sodium borate and 6.75 mg/ml 2,3,6-tri-O-methyl-beta-cyclodextrin buffer in CZE was found to be the most suitable approach for this analysis. Within 42 min, the MEKC method could successfully separate 12 authentic constituents, whereof chlorogenic acid, however, appeared as a broad and split peak, and capillarisin and chlorogenic acid overlapped partially with other coexisting substances in crude extract of the herb. The CZE method could completely overcome these problems and was used to determine the amounts of capillarisin, chlorogenic acid, scopoletin and caffeic acid in the extract. The effect of buffers on the constituent separation and the validation of the two methods were discussed.     

Syntheses of gold-manganese and gold-rhenium clusters, [(Ph3PAu)3M(CO)4] and [(Ph3PAu)4M(CO)4] (M = Mn, Re), and the crystal structure of [(Ph3PAu)4Mn(CO)4]BF4

The specific additions of one, three or four Ph₃PAu groups to [M(CO)₅]⁻ (M=Mn, Re) are described. Thus [M(CO)₅] ⁻ in THF reacts with [(Ph₃PAu)₃O]BF₄ to give [(Ph₃PAu)₄Mn(CO)₄]BF₄. An X-ray crystal structure of the M = Mn example shows the cation to have a trigonal bipyramidal Au₄Mn core with the Mn in an equatorial site. The previously known neutral (Ph₃PAu)₃M(CO)₄ clusters are formed by addition of two Ph₃PAu groups, using the mixed reagent [(Ph₃PAu) ₃O]BF₄/[ppn][Co(CO)₄], to Ph₃PAuM(CO)₅, which itself is readily prepared from [M(CO)₅]⁻ and Ph₃PAuCl.     

Optimization of solid-phase extraction and solid-phase microextraction for the determination of alpha- and beta-endosulfan in water by gas chromatography-electron-capture detection

The electrophoretic behaviour of ionizable and neutral alkylxanthines commonly used in pharmaceutical preparations was studied. The performance of various separation modes including capillary zone electrophoresis (CZE), cyclodextrin electrokinetic chromatography, and micellar electrokinetic chromatography (MEKC) with either sodium dodecyl sulfate (SDS) or bile salts as surfactants, was assessed. CZE in an alkaline medium successfully separates ionizable xanthines and dyphylline. The addition of carboxymethyl-β-cyclodextrin to the background electrolyte allows only partial resolution of neutral xanthines. Based on MEKC results, bile salts exhibit more discrimination ability than SDS to separate similar xanthines. The best results are provided by taurodeoxycholic acid, which ensures baseline separation of xanthines.