Production of reactive oxygen species in endothelial cells under different pulsatile shear stresses and glucose concentrations

A hemodynamic Lab-on-a-chip system was developed in this study. This system has two unique features: (1) it consists of a microfluidic network with an array of endothelial cell seeding sites for testing them under multiple conditions, and (2) the flow rate and the frequency of the culture medium in the microchannel are controlled by a pulsation free pump to mimic the flow profile of the blood in the blood vessel under different physiological conditions. The investigated physiological conditions were: (1) the resting condition in a normal shear stress of 15 dyne cm(-2) with a normal heart rate of 70 bpm, (2) an exhaustive exercise condition with a high shear stress of 30 dyne cm(-2) and a fast heart rate of 140 bpm, and (3) a constant high shear stress of 30 dyne cm(-2). Two chemical conditions were investigated (10 mM and 20 mM glucose) to mimic hyperglycemic conditions in diabetes patients. The effects of various shear stresses either alone or in combination with different glucose concentrations on endothelial cells were examined using the developed hemodynamic Lab-on-a-chip system by assessing two parameters. One is the intracellular level of reactive oxygen species (ROS) determined by a fluorescent probe, H(2)DCFDA. Another is the mitochondrial morphology revealed with a fluorescent dye, MitoTracker Green FM. The results showed that ROS level was elevated nearly 4-fold after 60 min of exhaustive exercise. We found that the pulsatile nature of the fluid was the determination factor for causing ROS generation in the cells as almost no increase of ROS was detected in the constant shear stress condition. Similarly, much higher level of ROS was detected when 10 mM glucose was applied to the cells under normal or high pulsatile shear stresses compared with under a static condition. These results suggest that it is necessary to use pulsatile shear stress to represent the physiological conditions of the blood flow, and demonstrate the advantage of utilizing this newly developed hemodynamic Lab-on-a-chip system over the conventional non-pulsatile system in the future shear stress related studies.     

Using a co-culture microsystem for cell migration under fluid shear stress

We have successfully developed a microsystem to co-cultivate two types of cells with a minimum defined gap of 50 μm, and to quantitatively study the impact of fluid shear stress on the mutual influence of cell migration velocity and distance. We used the hydrostatic pressure to seed two different cells, endothelial cells (ECs) and smooth muscle cells (SMCs), on opposite sides of various gap sizes (500 μm, 200 μm, 100 μm, and 50 μm). After cultivating the cells for 12 h and peeling the co-culture microchip from the culture dish, we studied the impacts of gap size on the migration of either cell type in the absence or presence of fluid shear stress (7 dyne cm(-2) and 12 dyne cm(-2)) influence. We found that both gap size and shear stress have profound influence on cell migration. Smaller gap sizes (100 μm and 50 μm) significantly enhanced cell migration, suggesting a requirement of an effective concentration of released factor(s) by either cell type in the gap region. Flow-induced shear stress delayed the migration onset of either cell type in a dose-dependent manner regardless of the gap size. Moreover, shear stress-induced decrease of cell migration becomes evident when the gap size was 500 μm. We have developed a co-culture microsystem for two kinds of cells and overcome the conventional difficulties in observation and mixed culture, and it would have more application for bio-manipulation and tissue repair engineering.     

Thermodynamic Investigation of Staphylococcus epidermidis interactions with protein-coated substrata

We evaluated self-assembled monolayers (SAMs) as potential coatings to prevent bacterial adhesion to biomaterials. Bacterial retention experiments were conducted on SAMs, some of which were coated with the model proteins fetal bovine serum (FBS) and fibronectin (FN). A thermodynamic approach was applied to calculate the Gibbs free energy changes of adhesion (DeltaG(adh)) of Staphylococcus epidermidis interacting with the substrates. When only nonspecific interactions controlled bacterial attachment, such as for the non-protein-coated substrates or the FBS substrates, the correlation between the thermodynamic predictions and measured values of bacterial retention was strong. However, when FN was adsorbed to the surfaces, the thermodynamic modeling underestimated bacterial adhesion, presumably since specific interactions between proteins of S. epidermidis and FN led to stronger attachment. Bacterial viability on the substrates was correlated with thermodynamic properties. For example, although bacteria attached more to surfaces having negative DeltaG(adh) values, these cells experienced the greatest loss of viability, presumably since strongly attached bacteria were unable to divide and grow. When the DeltaG(adh) values were decoupled into their components, we saw that acid-base interactions due to hydrogen bonding dominated the interactions of bacteria and proteins with each other and with the substrates in aqueous media. Finally, we discuss concerns regarding the use of the thermodynamic model to predict bacterial adhesion behavior in biomaterials systems.     

A multi-shear perfusion bioreactor for investigating shear stress effects in endothelial cell constructs

Tissue engineering research is increasingly relying on the use of advanced cultivation technologies that provide rigorously-controlled cell microenvironments. Herein, we describe the features of a micro-fabricated Multi-Shear Perfusion Bioreactor (MSPB) designed to deliver up to six different levels of physiologically-relevant shear stresses (1-13 dyne cm(-2)) to six cell constructs simultaneously, during a single run. To attain a homogeneous fluid flow within each construct, flow-distributing nets photo-etched with a set of openings for fluid flow were placed up- and down-stream from each construct. Human umbilical vein endothelial cells (HUVECs) seeded in alginate scaffolds within the MSPB and subjected to three different levels of shear stress for 24 h, responded accordingly by expressing three different levels of the membranal marker Intercellular Adhesion Molecule 1 (ICAM-1) and the phosphorylated endothelial nitric oxide synthetase (eNOS). A longer period of cultivation, 17 d, under two different levels of shear stress resulted in different lengths of cell sprouts within the constructs. Collectively, the HUVEC behaviour within the different constructs confirms the feasibility of using the MSPB system for simultaneously imposing different shear stress levels, and for validating the flow regime in the bioreactor vessel as assessed by the computational fluid dynamic (CFD) model.     

Impact of Peptide Micropatterning on Endothelial Cell Actin Remodeling for Cell Alignment under Shear Stress

HSVEC behavior under physiological shear stress in vitro is investigated on PET surfaces micropatterned with both RGDS and WQPPRARI peptides. This technique allows (i) creating geometries on surface to guide cell orientation under shear stress and (ii) controlling surface chemical composition in order to modulate cell behavior. Under shear stress, endothelial cells adhere on patterned PET surfaces and present a more rapid orientation in flow direction in comparison to cells cultured on homogeneous surfaces. Micropatterned surfaces presenting a large surface area ratio of RGDS/WQPPRARI peptides induce fibrillar adhesion, while surfaces presenting an equal RGDS/WQPPRARI peptides surface area ratio preferentially induce focal adhesion.

     

Effect of surface proteins on Staphylococcus epidermidis adhesion and colonization on silicone

Shunt infections are one of the most serious complications in shunt implant surgery. Previous studies have suggested that cerebrospinal fluid (CSF) proteins could affect bacterial adhesion and subsequent shunt infection. A systematic study using immobilized protein on the surface of silane-modified silicone was conducted to determine how these modifications influenced Staphylococcus epidermidis adhesion and colonization. A comparison was also made with silicone having physically adsorbed protein. A colony-counting adhesion assay and scanning electron microscopy (SEM) were used to provide quantitative analysis of bacterial adhesion and semi-quantitative analysis of bacterial colonization, respectively. In order to determine the appropriate silanization process for effective protein immobilization, the effect of bovine serum albumin (BSA) immobilized on n-3-(trimethoxysilyl)propyl-ethylenediamine (AEAPS)/silicone, aminopropyltriethoxysilane (APTMS)/silicone, 3-(glycidyloxypropyl)trimethoxysilane (GPTMS)/silicone, and octadecyltrichlorosilane (OTS)/silicone on bacterial adhesion was investigated. Upon identifying that OTS is the most effective silane, different types of proteins, including: BSA, human serum albumin (HSA), gamma-globulin, and fibrinogen were immobilized on OTS/silicone by a photo-immobilization method. Immobilized protein on modified silicone surfaces was found to be stable in saline for 30 days, while physically adsorbed protein showed instability within hours as determined by contact angle measurements and X-ray photoelectron spectroscopy (XPS). For HSA/OTS/silicone, BSA/OTS/silicone, gamma-globulin/OTS/silicone, fibrinogen/OTS/silicon, and physically absorbed BSA on silicone, the contact angles were 78.5 degrees, 80.7 degrees, 78.9 degrees, 81.3 degrees, and 96.5 degrees; and the amount of nitrogen content was found to be 4.6%, 5.0%, 5.6%, 7.2%, and 3.2%, respectively. All protein immobilized on OTS/silicone surfaces significantly reduced bacterial adhesion by around 75% compared to untreated silicone, while physically adsorbed BSA on silicone reduced by only 29.4%, as determined by colony-counting adhesion assay. However, there was no significant difference on bacterial adhesion among the different types of proteins immobilized on OTS/silicone. Minimizing bacterial adhesion and colonization can be attributed to the increased concentration of -NH2 group, and stability and more hydrophilic nature of the protein/OTS/silicone surfaces.     

微流控芯片流体剪切力和肿瘤坏死因子-α共同作用对大鼠软骨细胞表型的影响

流体剪切力是生物体内普遍存在的一种生物力学形式,是细胞微环境的重要组成部分,对细胞多种生物学行为有重要调节作用。该研究以微流控芯片技术为基础,建立了一种基于流阻原理能同时产生4个不同大小流体剪切力的微流控芯片平台,用以研究低流速的流体剪切力对大鼠原代软骨细胞表型维持的影响。结果表明,流体剪切力可促进软骨细胞的表型维持。还加入了肿瘤坏死因子-α(TNF-α),考察流体剪切力和TNF-α共同作用对软骨细胞表型的影响。结果表明,在剪切力和TNF-α共同作用下,软骨细胞的Ⅱ型胶原和蛋白多糖表达明显下调。该研究为软骨组织工程和骨性关节炎的疾病研究提供有力的研究平台,为骨关节疾病治疗和防治提供了理论依据。     

Adhesive properties of Staphylococcus epidermidis probed by atomic force microscopy

Mapping of the surface properties of Staphylococcus epidermidis and of biofilm forming bacteria in general is a key to understand their functions, particularly their adhesive properties. To gain a comprehensive view of the structural and chemical properties of S. epidermidis, four different strains (biofilm positive and biofilm negative strains) were analyzed using in situ atomic force microscopy (AFM). Force measurements performed using bare hydrophilic silicon nitride tips disclosed similar adhesive properties for each strain. However, use of hydrophobic tips showed that hydrophobic forces are not the driving forces for adhesion of the four strains. Rather, the observation of sawtooth force-distance patterns on the surface of biofilm positive strains documents the presence of modular proteins such as Aap that may mediate cell adhesion. Treatment of two biofilm positive strains with two chemical inhibitor compounds leads to a loss of adhesion, suggesting that AFM could be a valuable tool to screen for anti-adhesion molecules.     

Microscale correlation between surface chemistry, texture, and the adhesive strength of Staphylococcus epidermidis

Staphylococcus epidermidis is among the most commonly isolated microbes from medical implant infections, particularly in the colonization of blood-contacting devices. We explored the relationships between surface wettability and root-mean-square roughness (Rq) on microbial adhesive strength to a substrate. Molecular-level interactions between S. epidermidis and a variety of chemically and texturally distinct model substrata were characterized using a cellular probe and atomic force microscopy (AFM). Substrata included gold, aliphatic and aromatic self-assembled monolayers, and polymeric and proteinaceous materials. Substrate hydrophobicity, described in terms of the water contact angle, was an insufficient parameter to explain the adhesive force of the bacterium for any of the surfaces. Correlations between adhesion forces and Rq showed weak relationships for most surfaces. We used an alternate methodology to characterize the texture of the surface that is based on a fractal tiling algorithm applied to images of each surface. The relative area as a function of the scale of observation was calculated. The discrete bonding model (DBM) was applied, which describes the area available for bonding interactions over the full range of observational scales contained in the measured substrate texture. Weak negative correlations were obtained between the adhesion forces and the area available for interaction, suggesting that increased roughness decreases bacterial adhesion when nano- to micrometer scales are considered. We suggest that modification of the DBM is needed in order to include discontinuous bonding. The adhesive strength is still related to the area available for bonding on a particular scale, but on some very fine scales, the bacteria may not be able to conform to the valleys or pits of the substrate. Therefore, the bonding between the bacterium and substrate becomes discontinuous, occurring only on the tops of ridges or asperities.     

Adhesion behaviors of human trophoblast cells by contact with endothelial cells

Although it is still not clear whether migratory trophoblasts reach the spiral arteries by migration within blood vessels against blood flow or by a mechanism of directional cell division/proliferation, this process involves the attachment and adhesion of trophoblasts to endothelial cells lining the blood vessel walls. This raises the possibility that the cell–cell contact with endothelial cells may regulate trophoblast cell adhesion behaviors according to the surrounding flow condition. To test this, the adhesion forces of early gestation human trophoblast cells (TCs) cultured on glass slides coated with type I rat collagen or cultured with human umbilical vein endothelial cells (HUVECs) were measured quantitatively using a micropipette aspiration technique. Then, the resistance of TCs co-cultured with HUVECs to flow-induced shear stress was assessed with a flow chamber technique. The results showed that the adhesion force of TCs to glass slides coated with collagen was positively correlated with the concentration of collagen. By contact with endothelial cells, the adhesion force and the resistance to shear stress for the TCs were significantly enhanced. The interdiction of integrin β1 interaction remarkably reduced the adhesion forces of TCs to endothelial cells, hence their resistance to shear stress. The results therefore suggest that the contacts of TCs with endothelial cells enhance the adhesion forces of human TCs, partially by regulating with the integrin β1 according to the flow condition (i.e., the shear stress) in such a way to prevent the TCs from being carried downstream by flowing blood.     

Nitrogen-rich plasma-polymerized coatings on PET and PTFE surfaces improve endothelial cell attachment and resistance to shear flow

Low seeding efficiency and poor cell retention under flow-induced shear stress limit the effectiveness of in vitro endothelialization strategies for small-diameter vascular grafts. Primary-amine-rich plasma-polymerized coatings (PPE:N) deposited using low- and atmospheric-pressure plasma discharges on PET and PTFE are evaluated for their ability to improve endothelial cells' kinetics and strength of attachment. PPE:N coatings increase cell adhesion and adhesion rate, spreading, focal adhesion, and resistance to flow-induced shear compared with bare and gelatin-coated PET and PTFE. In particular, about 90% of the cells remain on coated surfaces after 1 h exposure to shear. These coatings, therefore, appear as a promising versatile approach to improve cell seeding strategies for vascular grafts.     

Fluorescence excitation and excited state intramolecular proton transfer of jet-cooled naphthol derivatives: Part 1. 1-Hydroxy-2-naphthaldehyde

The S(0) → S(1) fluorescence excitation spectrum of jet-cooled 1H2N with origin at 25484 cm(-1) has been measured. Twelve totally symmetric modes and five non-totally symmetric modes have been assigned in the excitation spectrum. Theoretical calculations at DFT B3LYP/6-31G** and CIS/6-31G** levels indicate that the 1H2N molecular geometry is more planar in the S(1) state than in the ground state. The geometry of the naphthalene ring changes upon excitation and promotes a number of totally symmetric ring stretching modes, in the excitation spectrum. As a result of the geometry change upon excitation a number of non-totally symmetric modes gain intensity. Based on a rotational envelope fitting procedure the average excited rotational state lifetime was estimated to be between 7 and 16 ps for 0 ≤E≤ hc × 800 cm(-1) (E is excess energy above the S(1) origin). The decay rate coefficients, k, of the rotational S(1) states, are not constant over this range of excess energies. By applying a Golden Rule model, it was determined that internal conversion to S(0) is unlikely to be the sole non-radiative process contributing to the decay of the excited states. It was concluded that excited state intramolecular proton transfer (ESIPT) plays a role in the observed behaviour of the rate co-efficient with excess energy. The observation of (i) a sharp increase in rate coefficient, k, above an excess energy of ～550 cm(-1), and (ii) a significant number of high intensity fluorescence excitation spectrum features above an excess energy of ～700 cm(-1), may indicate the presence of an energy barrier of ～550 cm(-1), between the enol and keto geometries in the S(1) state. This result supports the conclusions of S. De, S. Ash, S. Dalai and A. Misra, J. Mol. Struc. Theochem, 2007, 807, 33-41, who estimated a barrier to ESIPT of ～750 cm(-1). It was concluded that ESIPT occurs in 1H2N, across an energy barrier with a rate constant, k(pt)≤ 10(11) s(-1). Hence, at low excess energies (≤ 550 cm(-1)), the observed emission band originates predominantly from the keto tautomer. Above an excess energy of ～1600 cm(-1), 1H2N decays predominantly via a non-radiative mechanism.     

Microrheology of bacterial biofilms in vitro: Staphylococcus aureus and Pseudomonas aeruginosa

The rheology of bacterial biofilms at the micron scale is an important step to understanding the communal lifecycles of bacteria that adhere to solid surfaces, as it measures how they mutually adhere and desorb. Improvements in particle-tracking software and imaging hardware have allowed us to successfully employ particle-tracking microrheology to measuring single-species bacterial biofilms, based on Staphlococcus aureus and Pseudomonas aeruginosa. By tracking displacements of the cells at a range of timescales, we separate active and thermal contributions to the cell motion. The S. aureus biofilms in particular show power-law rheology, in common with other dense colloidal suspensions. By calculating the mean compliance of S. aureus biofilms, we observe them becoming less compliant during growth, and more compliant during starvation. The biofilms are rheologically inhomogeneous on the micron scale, as a result of the strength of initial adhesion to the flow cell surface, the arrangement of individual bacteria, and larger-scale structures such as flocs of P. aeruginosa. Our S. aureus biofilms became homogeneous as a function of height as they matured: the rheological environment experienced by a bacterium became independent of how far it lived from the flow cell surface. Particle-tracking microrheology provides a quantitative measure of the "strength" of a biofilm. It may therefore prove useful in identifying drug targets and characterizing the effect of specific molecular changes on the micron-scale rheology of biofilms.     

Controlling cell attachment selectively onto biological polymer-colloid templates using polymer-on-polymer stamping

A new patterning approach using polymer-on-polymer stamping (POPS) has been developed to fabricate polymer-colloid templates for controlling selective cell attachment. In this paper, a polyamine surface patterned onto a poly(acrylic acid)/poly(allylamine hydrochloride) (PAA/PAH) cell resistant multilayer platform serves as a template for the deposition of close- or loose-packed colloidal particles. Peptides containing the RGD adhesion sequence were used to modify the PAH/colloid surface for specific cell attachment. Cell behavior was studied by varying colloidal packing array density, pattern geometry, and surface chemistry. It was found that loose-packed RGD-modified colloidal arrays enhance cell adhesion, as observed through the development of focal adhesion contacts and orientation of actin stress fibers, but close-packed colloidal arrays induce a rounded and nonadhesive cell morphology and yield a smaller number of attached cells. On loose-packed arrays, cells adjust their shapes to the pattern geometry when the stripe width is smaller than 50 microm and increase their extent of attachment when the concentration of surface RGD peptides is increased. This new biomaterials system allows the examination of cell behavior as a function of RGD surface distribution on the molecular to micrometer scale and reveals cellular response to different surface roughnesses.     

Quantifying nanoparticle adhesion mediated by specific molecular interactions

Receptor-mediated targeting of nanometric contrast agents or drug carriers holds great potential for treating cardiovascular and vascular-associated diseases. However, predicting the ability of these vectors to adhere to diseased cells under dynamic conditions is complex due to the interplay of transport, hydrodynamic force, and multivalent bond formation dynamics. Therefore, we sought to determine the effects of adhesion molecule density and flow rate on adhesion of 210 nm particles, with the goal of identifying criteria to optimize binding efficiency and selectivity. Our system employed a physiologically relevant ligand, the vascular adhesion molecule ICAM-1, and an ICAM-1 specific antibody tethered to the nanoparticle using avidin-biotin chemistry. We measured binding and dissociation of these particles in a flow chamber as a function of antibody density, ligand density, and flow rate, and using a transport-reaction model we distilled overall kinetic rate constants for adhesion and detachment from the binding data. We demonstrate that both attachment and detachment of 210 nm particles can be correlated with receptor and ligand valency and are minimally affected by shear rate. Furthermore, we uncovered a time-dependent mechanism governing particle detachment, in which the rate of detachment decreases with contact time according to a power law. Finally, we use our results to illustrate how to engineer adhesion selectivity for specific molecular targeting applications. These results establish basic principles dictating nanoparticle adhesion and dissociation and can be used as a framework for the rational design of targeted nanoparticle therapeutics that possess optimum adhesive characteristics.     

Synthesis of copolymer brushes endowed with adhesion to stainless steel surfaces and antibacterial properties by controlled nitroxide-mediated radical polymerization

Novel copolymer brushes have been synthesized by a two-step "grafting from" method that consists of the electrografting of poly(2-phenyl-2-(2,2,6,6-tetramethyl-piperidin-1-yloxy)-ethylacrylate) onto stainless steel, followed by the nitroxide-mediated radical polymerization of 2-(dimethylamino ethyl)acrylate and styrene or n-butyl acrylate, initiated from the electrografted polyacrylate chains. The grafted copolymers were quaternized in order to endow them with antibacterial properties. Peeling tests have confirmed the strong adhesion of the grafted copolymer onto the stainless steel substrate. Quartz crystal microbalance experiments have proven that fibrinogen adhesion is lower on the hydrophilic quaternized films compared to the nonionic counterpart. Such quaternized copolymers exhibit significant antibacterial activity against the Gram-positive bacteria S. aureus and the Gram-negative bacteria E. coli.     

Microbial adhesion to poly(ethylene oxide) brushes: influence of polymer chain length and temperature

Glass surfaces were modified by end-grafting poly(ethylene oxide) (PEO) chains having molecular weights of 526, 2000, or 9800 Da. Characterization using water contact angles, ellipsometry, and X-ray photoelectron spectroscopy confirmed the presence of the PEO brushes on the surface with estimated lengths in water of 2.8-, 7.5-, and 23.7-nm, respectively. Adhesion of two bacterial (Staphylococcus epidermidis and Pseudomonas aeruginosa) and two yeast (Candida albicans and Candida tropicalis) strains to these brushes was studied and compared to their adhesion to bare glass. For the bacterium P. aeruginosa and the yeast C. tropicalis, adhesion to the 2.8-nm brush was comparable to their adhesion on bare glass, whereas adhesion to the 7.5- and 23.7-nm brushes was greatly reduced. For S. epidermidis, adhesion was only slightly higher to the 2.8-nm brush than that to the longer brushes. Adhesion of the yeast C. albicans to the PEO brushes was lower than that to glass, but no differences in adhesion were found between the three brush lengths. After passage of an air bubble, nearly all microorganisms adhering to a brush were removed, irrespective of brush length, whereas retention of the adhering organisms on glass was much higher. No significant differences were found in adhesion nor retention between experiments conducted at 20 and those conducted at 37 degrees C.     

Vinyl sulfones: inhibitors of SrtA, a transpeptidase required for cell wall protein anchoring and virulence in Staphylococcus aureus

Several small molecule vinyl sulfones were found to exhibit irreversible time-dependent inhibition of the Staphylococcus aureus sortase SrtA in vitro. A representative of these compounds was shown to impair the ability of S. aureus bacteria to bind fibronectin-coated surfaces through in vivo inhibition of SrtA-mediated linkage of fibronectin to the cell surface. These data highlight the potential use of small molecule vinyl sulfones as chemotherapeutics to prevent adhesion to and colonization of host tissues during S. aureus infection.     

Electrochemically induced anatase inhibits bacterial colonization on Titanium Grade 2 and Ti6Al4V alloy for dental and orthopedic devices

Bacterial contamination of implanted devices is a common cause of their failure. The aim of the present study was to assess the capability of electrochemical procedures to: (a) promote the formation of anatase on the surface of commercially pure Grade 2 Ti and Ti Grade 5 (Ti6Al4V) alloy; (b) inhibit in vitro biofilm formation of Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus mutans and Porphyromonas gingivalis and oral plaque in vivo, (c) preserve favorable response of osteoblasts and fibroblasts to materials surfaces. Ti Grade 2 and Ti Grade 5 were respectively anodized at two different voltages: 90 and 130V for pure titanium; 100 and 120V for Ti6Al4V alloy. Surface characterization was performed by scanning electron microscopy (SEM) equipped with EDS probe, laser profilometry and X-ray diffractometry. Bacterial adhesion characterization was performed either in vitro and in vivo in patients. Osteoblast and fibroblast response was evaluated by metabolic activity assessment. The higher voltage applied in the anodization treatment of pure titanium (130V) and Ti6Al4V alloy (120V) surfaces, compared to the untreated pure titanium and Ti6Al4V and to lower voltage treatments, resulted in a greater decrease in bacterial attachment and biofilm formation in both in vitro and in vivo experiments. In contrast, the high voltage treatments were found to promote osteoblasts and fibroblasts proliferation. The observations indicated that the experimented high voltage anodization treatments may contribute to preserve the tissue integration and reduce bacteria colonization of titanium and titanium alloy for implantable applications.     

Traction force microscopy on-chip: shear deformation of fibroblast cells

We develop here a microfabrication compatible force measurement technique termed as ultrasoft polydimethylsiloxane-based traction force microscopy (UPTFM). This technique is devised for mapping the cellular traction forces imparted on the adhering substrate, so as to depict the physiological state of the cells surviving in the micro-confinement. We subsequently integrate the technique with a microfluidic platform for evaluating different states of stress in adherent mouse skin fibroblast L929 cells. Utilizing this technique, we monitor the spatio-temporal evolution of cellular traction forces for static incubation periods with no media replenishment as well as for dynamic flow conditions that inherently induce cell deformation and detachment. While the studies conducted on a quiescent fluid medium enable us to obtain an optimal static cell incubation period, those executed under dynamic flow conditions provide us with the minuscule details of the cellular response, deformation and detachment processes. We elucidate the correlation between shear activated cytosolic calcium ion release profile and the local traction forces as an attempt to apply UPTFM in the domain of functional biological purposes. Pertinently, we map the centroidal displacement and the maximum traction stress in characterizing the critical shear rate conditions for the onset of the cell peeling-off process, and demonstrate their contrasting features in comparison to the vesicle lift off processes in a shear flow. Theoretically, these deviations can only be explained by taking physiologically relevant cell adhesion models into consideration, which, while retaining the intrinsic simplicity, are able to reproduce the key experimental outcomes at least with qualitative agreement. We execute further theoretical investigations with variable magnitudes of membrane stiffness, viscosity and adhesion strength, so as to come up with interesting biophysical confluences.