Syntheses, structural determination, and electrochemistry of Ru(2)(Fap)(4)Cl and Ru(2)(Fap)(4)(NO)Cl

Ru(2)(Fap)(4)Cl and Ru(2)(Fap)(4)(NO)Cl, where Fap is the 2-(2-fluoroanilino)pyridinate anion, were synthesized, and their structural, electrochemical, and spectroscopic properties were characterized. Ru(2)(Fap)(4)Cl, which was obtained by reaction between Ru(2)(O(2)CCH(3))(4)Cl and molten HFap, crystallizes in the monoclinic space group P2(1)/c, with a = 11.2365(4) A, b = 19.9298(8) A, c = 19.0368(7) A, beta = 90.905(1) degrees, and Z = 4. The presence of three unpaired electrons on the Ru(2)(5+) core and the 2.2862(3) A Ru-Ru bond length for Ru(2)(Fap)(4)Cl are consistent with the electronic configuration (sigma)(2)(pi)(4)(delta)(2)(pi*)(2)(delta*)(1). The reaction between Ru(2)(Fap)(4)Cl and NO gas yields Ru(2)(Fap)(4)(NO)Cl, which crystallizes in the orthorhombic space group Pbca, with a = 10.0468(6) A, b = 18.8091(10) A, c = 41.7615(23) A, and Z = 8. The Ru-Ru bond length of Ru(2)(Fap)(4)(NO)Cl is 2.4203(8) A, while its N-O bond length and Ru-N-O bond angle are 1.164(8) A and 155.8(6) degrees, respectively. Ru(2)(Fap)(4)(NO)Cl can be formulated as a formal Ru(2)(II,II)(NO(+)) complex with a linear Ru-N-O group, and the proposed electronic configuration for this compound is (sigma)(2)(pi)(4)(delta)(2)(pi*)(3)(delta*)(1). The binding of NO to Ru(2)(Fap)(4)Cl leads to some structural changes of the Ru(2)(Fap)(4) framework and a stabilization of the lower oxidation states of the diruthenium unit. Also, IR spectroelectrochemical studies of Ru(2)(Fap)(4)(NO)Cl show that NO remains bound to the complex upon reduction and that the first reduction involves the addition of an electron on the diruthenium core and not on the NO axial ligand.     

Cyanide adducts on the diruthenium core of [Ru2(L)4](+) (L = ap, CH3ap, Fap, or F3ap). Electronic properties and binding modes of the bridging ligand

The products of the reaction between CN(-) and four different diruthenium complexes of the type Ru(2)(L)(4)Cl where L = 2-CH(3)ap (2-(2-methylanilino)pyridinate anion), ap (2-anilinopyridinate anion), 2-Fap (2-(2-fluoroanilino)pyridinate anion), or 2,4,6-F(3)ap (2-(2,4,6-trifluoroanilino)pyridinate anion) are reported. Mono- and/or dicyano adducts of the type Ru(2)(L)(4)(CN) and Ru(2)(L)(4)(CN)(2) are found exclusively as reaction products when either the 2-CH(3)ap or the ap derivative is reacted with CN(-), but diruthenium complexes with formulations of the type Ru(2)(F(x)ap)(3)[mu-(o-NC)F(x-1)ap](mu-CN) or Ru(2)(F(x)ap)(4)(mu-CN)(2) (x = 1 or 3) are also generated when Ru(2)(Fap)(4)Cl or Ru(2)(F(3)ap)(4)Cl is reacted with CN(-). More specifically, four products formulated as Ru(2)(Fap)(4)(CN), Ru(2)(Fap)(4)(CN)(2), Ru(2)(Fap)(3)[mu-(o-NC)ap](mu-CN), and Ru(2)(Fap)(4)(mu-CN)(2) can be isolated from a reaction of CN(-) with the Fap derivative, but the exact type and yield of these compounds depend on the temperature at which the experiment is carried out. In the case of the F(3)ap derivative, the only diruthenium complex isolated from the reaction mixture has the formulation Ru(2)(F(3)ap)(3)[mu-(o-NC)F(2)ap](mu-CN) and this compound has structural, electrochemical, and spectroscopic properties quite similar to that of previously characterized Ru(2)(F(5)ap)[mu-(o-NC)F(4)ap](mu-CN). Both the mono- and dicyano derivatives synthesized in this study possess the isomer type of their parent chloro complexes. The Ru-Ru bond lengths of Ru(2)(ap)(4)(CN) and Ru(2)(2-CH(3)ap)(4)(CN) are longer than those of Ru(2)(ap)(4)Cl and Ru(2)(CH(3)ap)(4)Cl, respectively, and this is accounted for by the strong sigma-donor properties of the CN(-) ligand as compared to Cl(-). The Ru-C bonds in Ru(2)(ap)(4)(CN)(2) are significantly shorter than those in Ru(2)(ap)(4)(CN), thus revealing a greatly enhanced Ru-CN interaction in the dicyano adduct, a result which is also indicated by the fact that nu(CN) in Ru(2)(ap)(4)(CN)(2) is 50 cm(-1) higher than nu(CN) in Ru(2)(ap)(4)(CN). Although both (4,0) Ru(2)(ap)(4)(CN)(2) and (3,1) Ru(2)(Fap)(4)(CN)(2) possess the same formulation, there are clear structural differences between the two complexes and this can be explained by the fact that the two cyano derivatives possess a different binding symmetry of the bridging ligands. Each mono- and dicyano adduct was electrochemically investigated in CH(2)Cl(2) containing TBAP as supporting electrolyte. Ru(2)(ap)(4)(CN), Ru(2)(CH(3)ap)(4)(CN), and Ru(2)(Fap)(4)(CN) undergo one reduction and two oxidations. The two dicyano adducts of the ap and Fap derivatives are characterized by two reductions and one oxidation. The potentials of these processes are all negatively shifted in potential by 400-720 mV with respect to half-wave potentials for the same redox couples of the monocyano derivatives, with the exact value depending upon the specific redox reaction.     

Electrochemical and spectroelectrochemical characterization of Ru(2)(4+) and Ru(2)(3+) complexes under a CO atmosphere

Eleven different Ru(2)(4+) and Ru(2)(3+) derivatives are characterized by thin-layer FTIR and UV-visible spectroelectrochemistry under a CO atmosphere. These compounds, which were in-situ electrogenerated from substituted anilinopyridine complexes with a Ru(2)(5+) core, are represented as Ru(2)(L)(4)Cl where L = 2-CH(3)ap, ap, 2-Fap, 2,3-F(2)ap, 2,4-F(2)ap, 2,5-F(2)ap, 3,4-F(2)ap, 3,5-F(2)ap, 2,4,6-F(3)ap, or F(5)ap. The Ru(2)(5+) complexes do not axially bind CO while mono- and bis-CO axial adducts are formed for the Ru(2)(4+) and Ru(2)(3+) derivatives, respectively. Six of the eleven investigated compounds exist in a (4,0) isomeric form while five adopt a (3,1) geometric conformation. These two series of compounds thus provide a large enough number of derivatives to examine trends and differences in the spectroscopic data of the two types of isomers in their lower Ru(2)(4+) and Ru(2)(3+) oxidation states. UV-visible spectra of the Ru(2)(4+) derivatives and IR spectra of the Ru(2)(3+) complexes under CO are both isomer dependent, thus suggesting that these data can be used to reliably predict the isomeric form, i.e., (3,1) or (4,0), of diruthenium complexes containing four unsymmetrical substituted anilinopyridinate bridging ligands; this was confirmed by X-ray crystallographic data for seven compounds whose structures were available.     

Dithiocarboxylate complexes of ruthenium(II) and osmium(II)

The ruthenium(II) complexes [Ru(R)(κ(2)-S(2)C·IPr)(CO)(PPh(3))(2)](+) (R = CH=CHBu(t), CH=CHC(6)H(4)Me-4, C(C≡CPh)=CHPh) are formed on reaction of IPr·CS(2) with [Ru(R)Cl(CO)(BTD)(PPh(3))(2)] (BTD = 2,1,3-benzothiadiazole) or [Ru(C(C≡CPh)=CHPh)Cl(CO)(PPh(3))(2)] in the presence of ammonium hexafluorophosphate. Similarly, the complexes [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)](+) and [Ru(C(C≡CPh)=CHPh)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)](+) are formed in the same manner when ICy·CS(2) is employed. The ligand IMes·CS(2) reacts with [Ru(R)Cl(CO)(BTD)(PPh(3))(2)] to form the compounds [Ru(R)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) (R = CH=CHBu(t), CH=CHC(6)H(4)Me-4, C(C≡CPh)=CHPh). Two osmium analogues, [Os(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) and [Os(C(C≡CPh)=CHPh)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) were also prepared. When the more bulky diisopropylphenyl derivative IDip·CS(2) is used, an unusual product, [Ru(κ(2)-SC(H)S(CH=CHC(6)H(4)Me-4)·IDip)Cl(CO)(PPh(3))(2)](+), with a migrated vinyl group, is obtained. Over extended reaction times, [Ru(CH=CHC(6)H(4)Me-4)Cl(BTD)(CO)(PPh(3))(2)] also reacts with IMes·CS(2) and NH(4)PF(6) to yield the analogous product [Ru{κ(2)-SC(H)S(CH=CHC(6)H(4)Me-4)·IMes}Cl(CO)(PPh(3))(2)](+)via the intermediate [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+). Structural studies are reported for [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IPr)(CO)(PPh(3))(2)]PF(6) and [Ru(C(C≡CPh)=CHPh)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)]PF(6).     

Solvent effects on the electrochemistry and spectroelectrochemistry of diruthenium complexes. Studies of Ru2(L)4Cl where L=2-CH3ap, 2-Fap, and 2,4,6-F3ap, and ap is the 2-anilinopyridinate anion

Three Ru2(5+) diruthenium complexes, (4,0) Ru2(2-CH3ap)4Cl, (3,1) Ru2(2-Fap)4Cl, and (3,1) Ru2(2,4,6-F3ap)4Cl where ap is the 2-anilinopyridinate anion, were examined as to their electrochemical and spectroelectrochemical properties in five different nonaqueous solvents (CH2Cl2, THF, PhCN, DMF, and DMSO). Each compound undergoes a single one-electron metal-centered oxidation in THF, DMF, and DMSO and two one-electron metal-centered oxidations in CH2Cl2 and PhCN. The three diruthenium complexes also undergo two reductions in each solvent except for CH2Cl2, and these electrode processes are assigned as Ru2(5+/4+) and Ru2(4+/3+). Each neutral, singly reduced, and singly oxidized species was characterized by UV-vis thin-layer spectroelectrochemistry, and the data are discussed in terms of the most probable electronic configuration of the compound in solution. The three neutral complexes contain three unpaired electrons as indicated by magnetic susceptibility measurements using the Evans method (3.91-3.95 muB), and the electronic configuration is assigned as sigma2pi4delta2pi(*2)delta, independent of the solvent. The three singly oxidized compounds have two unpaired electrons in CD2Cl2, DMSO-d6, or CD3CN (2.65-3.03 muB), and the electronic configuration is here assigned as sigma2pi4delta2pi(*2). The singly reduced compound also has two unpaired electrons (2.70-2.80 muB) in all three solvents, consistent with the electronic configuration sigma2pi4delta2pi(*2)delta(*2) or sigma2pi4delta2pi(*3)delta*. Finally, the overall effect of solvent on the number of observed redox processes is discussed in terms of solvent binding, and several formation constants were calculated.     

Synthesis, characterization, and electrochemistry of diruthenium(III,II) and monoruthenium(III) complexes containing pyridyl-substituted 2-anilinopyridinate ligands

Reaction of the metal-metal bonded complex Ru(2)(O2CCH3)4Cl with 2-anilino-4-methylpyridine leads to the (3,1) isomer of the diruthenium(III,II) complex Ru2(ap-4-Me)4Cl, 1 while the same reaction with 2-anilino-6-methylpyridine gives the monoruthenium(III) derivative Ru(ap-6-Me)3, 2. Both compounds were examined as to their structural, electrochemical, and UV-visible properties, and the data were then compared to that previously reported for (4,0) Ru2(2-Meap)4Cl and other (3,1) isomers of Ru2(L)4Cl with similar anionic bridging ligands. ESR spectroscopy indicates that the monoruthenium derivative 2 contains low-spin Ru(III), and the presence of a single ruthenium atom is confirmed by an X-ray structure of the compound. The combined electrochemical and UV-vis spectroelectrochemical data indicate that the diruthenium complex 1 is easily converted to its Ru2(4+) and Ru2(6+) forms upon reduction or oxidation by one electron while the monoruthenium derivative 2 also undergoes metal-centered redox processes to give Ru(II) and Ru(IV) complexes under the same solution conditions. The reactivity of 1 with CO and CN- was also examined.     

Towards new organometallic wires: tetraruthenium complexes bridged by phenylenevinylene and vinylpyridine ligands

The tetranuclear complexes [{(PiPr(3))(2)(CO)ClRu(mu-CH=CHpy)Ru Cl(CO)(PPh(3))(2)}(2)(mu-CH=CH-C(6)H(4)- CH=CH-1,4)] (3 a) and [{(PiPr(3))(2)(CO)ClRu(mu-CH=CHpy)RuCl(CO)(PPh(3))(2)}(2)(mu-CH=CH-C(6)H(4)-CH=CH-1,3)] (3b), which contain vinylpyridine ligands that connect peripheral Ru(PiPr(3))(2)(CO)Cl units to a central divinylphenylene-bridged diruthenium core, have been prepared and investigated. These complexes, in various oxidation states up to the tetracation level, have been characterized by standard electrochemical and spectroelectrochemical techniques, including IR, UV/Vis/NIR and ESR spectroscopy. A comparison with the results for the vinylpyridine-bridged dinuclear complex [PiPr(3))(2)(CO)ClRu(mu-CH=CHpy)RuCl(CO)(PPh(3))(2)(CH=CHPh)] (6) and the divinylphenylene-bridged complexes [{(EtOOCpy)(CO)Cl(PPh(3))(2)Ru}(2)(mu-CH=CH-C(6)H(4)-CH=CH-1,4)] (8a) and [{(EtOOCpy)(CO)Cl(PPh(3))(2)Ru}(2)(mu-CH=CH-C(6)H(4)-CH=CH-1,3)] (8b), which represent the outer sections (6) or the inner core (8a,b) of complexes 3a,b, and with the mononuclear complex [(EtOOCpy)(CO)(PPh(3))(2)RuCl(CH=CHPh)] (7) indicate that every accessible oxidation process is primarily centred on one of the vinyl ligands, with smaller contributions from the metal centres. The experimental results and quantum chemical calculations indicate charge- and spin-delocalization across the central divinylphenylenediruthenium part of 3a,b or the styrylruthenium unit of 6, but not beyond. The energy gap between the higher lying styryl- or divinylphenylenediruthenium-based and the lower occupied vinylpyridineruthenium-based orbitals increases in the order 6<3 b<3 a and thus follows the conjugation within the non-heteroatom-substituted aromatic vinyl ligand.     

Electronic structures of ruthenium and osmium complexes of 9,10-phenanthrenequinone

The reaction of 9,10-phenanthrenequinone (PQ) with [M(II)(H)(CO)(X)(PPh(3))(3)] in boiling toluene leads to the homolytic cleavage of the M(II)-H bond, affording the paramagnetic trans-[M(PQ)(PPh(3))(2)(CO)X] (M = Ru, X = Cl, 1; M = Os, X = Br, 3) and cis-[M(PQ)(PPh(3))(2)(CO)X] (M = Ru, X = Cl, 2; M = Os, X = Br, 4) complexes. Single-crystal X-ray structure determinations of 1, 2·toluene, and 4·CH(2)Cl(2), EPR spectra, and density functional theory (DFT) calculations have substantiated that 1-4 are 9,10-phenanthrenesemiquinone radical (PQ(?-)) complexes of ruthenium(II) and osmium(II) and are defined as trans-[Ru(II)(PQ(?-))(PPh(3))(2)(CO)Cl] (1), cis-[Ru(II)(PQ(?-))(PPh(3))(2)(CO)Cl] (2), trans-[Os(II)(PQ(?-))(PPh(3))(2)(CO) Br] (3), and cis-[Os(II)(PQ(?-))(PPh(3))(2)(CO)Br] (4). Two comparatively longer C-O [average lengths: 1, 1.291(3) ?; 2·toluene, 1.281(5) ?; 4·CH(2)Cl(2), 1.300(8) ?] and shorter C-C lengths [1, 1.418(5) ?; 2·toluene, 1.439(6) ?; 4·CH(2)Cl(2), 1.434(9) ?] of the OO chelates are consistent with the presence of a reduced PQ(?-) ligand in 1-4. A minor contribution of the alternate resonance form, trans- or cis-[M(I)(PQ)(PPh(3))(2)(CO)X], of 1-4 has been predicted by the anisotropic X- and Q-band electron paramagnetic resonance spectra of the frozen glasses of the complexes at 25 K and unrestricted DFT calculations on 1, trans-[Ru(PQ)(PMe(3))(2)(CO)Cl] (5), cis-[Ru(PQ)(PMe(3))(2)(CO)Cl] (6), and cis-[Os(PQ)(PMe(3))(2)(CO)Br] (7). However, no thermodynamic equilibria between [M(II)(PQ(?-))(PPh(3))(2)(CO)X] and [M(I)(PQ)(PPh(3))(2)(CO)X] tautomers have been detected. 1-4 undergo one-electron oxidation at -0.06, -0.05, 0.03, and -0.03 V versus a ferrocenium/ferrocene, Fc(+)/Fc, couple because of the formation of PQ complexes as trans-[Ru(II)(PQ)(PPh(3))(2)(CO)Cl](+) (1(+)), cis-[Ru(II)(PQ)(PPh(3))(2)(CO)Cl](+) (2(+)), trans-[Os(II)(PQ)(PPh(3))(2)(CO)Br](+) (3(+)), and cis-[Os(II)(PQ)(PPh(3))(2)(CO)Br](+) (4(+)). The trans isomers 1 and 3 also undergo one-electron reduction at -1.11 and -0.96 V, forming PQ(2-) complexes trans-[Ru(II)(PQ(2-))(PPh(3))(2)(CO)Cl](-) (1(-)) and trans-[Os(II)(PQ(2-))(PPh(3))(2)(CO)Br](-) (3(-)). Oxidation of 1 by I(2) affords diamagnetic 1(+)I(3)(-) in low yields. Bond parameters of 1(+)I(3)(-) [C-O, 1.256(3) and 1.258(3) ?; C-C, 1.482(3) ?] are consistent with ligand oxidation, yielding a coordinated PQ ligand. Origins of UV-vis/near-IR absorption features of 1-4 and the electrogenerated species have been investigated by spectroelectrochemical measurements and time-dependent DFT calculations on 5, 6, 5(+), and 5(-).     

Diruthenium(II,III) tetramidates as a new class of oxygenation catalysts

Two new diruthenium(II,III) tetramidate compounds, Ru(2)(NHOCC(CH(3))(2))(4)Cl (1) and Ru(2)(NHOCCH(2)CH(3))(4)Cl (2) have been prepared and structurally characterized by X-ray crystallography. The activity of promoting sulfide oxygenation using simple oxidants such as hydrogen peroxide (H(2)O(2)) and tert-butyl hydroperoxide (TBHP) was studied. A UV-kinetics study indicated that the initial rates of 1 and 2 are comparable to the previously studied diruthenium tetracarboxylates in promoting TBHP oxygenation of methyl phenyl sulfide (MPS). Using excess oxidant and CH(3)CN as the solvent, organic sulfides MPS and diphenyl sulfide (PPS) were oxidized using 1 mol% of the catalytic species. Compound 1 is more effective than 2 in converting sulfides to sulfoxide under the same conditions. Fast conversion was achieved when the reactions were carried out in the solvent-free conditions, and the major oxidation product was the sulfoxide. The electronic structure of the title compounds was studied with DFT calculations to gain an understanding of the activation of peroxy reagents.     

Synthesis, structures, and properties of ruthenium(II) complexes of N-(1,10-phenanthrolin-2-yl)imidazolylidenes

Mononuclear ruthenium complexes [RuCl(L1)(CH(3)CN)(2)](PF(6)) (2a), [RuCl(L2)(CH(3)CN)(2)](PF(6)) (2b), [Ru(L1)(CH(3)CN)(3)](PF(6))(2) (4a), [Ru(L2)(CH(3)CN)(3)](PF(6))(2) (4b), [Ru(L2)(2)](PF(6))(2) (5), [RuCl(L1)(CH(3)CN)(PPh(3))](PF(6)) (6), [RuCl(L1)(CO)(2)](PF(6)) (7), and [RuCl(L1)(CO)(PPh(3))](PF(6)) (8), and a tetranuclear complex [Ru(2)Ag(2)Cl(2)(L1)(2)(CH(3)CN)(6)](PF(6))(4) (3) containing 3-(1,10-phenanthrolin-2-yl)-1-(pyridin-2-ylmethyl)imidazolylidene (L1) and 3-butyl-1-(1,10-phenanthrolin-2-yl)imidazolylidene (L2) have been prepared and fully characterized by NMR, ESI-MS, UV-vis spectroscopy, and X-ray crystallography. Both L1 and L2 act as pincer NNC donors coordinated to ruthenium (II) ion. In 3, the Ru(II) and Ag(I) ions are linked by two bridging Cl(-) through a rhomboid Ag(2)Cl(2) ring with two Ru(II) extending to above and down the plane. Complexes 2-8 show absorption maximum over the 354-428 nm blueshifted compared to Ru(bpy)(3)(2+) due to strong σ-donating and weak π-acceptor properties of NHC ligands. Electrochemical studies show Ru(II)/Ru(III) couples over 0.578-1.274 V.     

A family of diruthenium compounds with dianionic tridentate ligands of N-(2-pyridyl)-2-oxy-5-R-benzylaminate (R = H, Me, Cl, Br, NO(2)): isolation, structure determination, and electrochemistry

The ligand substitution reaction of Ru(2)(O(2)CCH(3))(4)Cl with 5-substituted N-(2-pyridyl)-2-oxy-5-R-benzylaminate (R = H, Me, Cl, Br, NO(2)) resulted in a family of anionic diruthenium species of [Ru(2)(O(2)CCH(3))(2)(R-salpy)(2)](-) that were isolated by using Na(+)- or K(+)-18-crown-6-ether as the countercation: [A(18-crown-6)(S)(x)()][Ru(2)(O(2)CCH(3))(2)(R-salpy)(2)] (A = Na(+), K(+); S = solvent; R = H, 1; Me, 2; Cl, 3; Br, 4; NO(2), 5). All compounds were structurally characterized by X-ray crystallography. The structural features of the anionic parts are very similar among the compounds: two acetate and two R-salpy(2)(-) ligands are, respectively, located around the Ru(2) unit in a trans fashion, where the R-salpy(2)(-) ligand acts as a tridentate ligand having both bridging and chelating characters to form the M-M bridging/axial-chelating mode. Compounds 1 and 5 with K(+)-18-crown-6-ether have one-dimensional chain structures, the K(+)-18-crown-6-ether interacting with phenolate oxygens of the [Ru(2)(O(2)CCH(3))(2)(R-salpy)(2)](-) unit to form a repeating unit, [.K.O-Ru-Ru-O.], whereas 2-4 are discrete. Cyclic voltammetry and differential pulse voltammetry revealed systematic redox activities based on the dimetal center and the substituted ligand, obeying the Hammett law with the reaction constants per substituent, rho, for the redox processes being 127 mV for Ru(2)(5+)/Ru(2)(4+), 185 mV for Ru(2)(6+)/Ru(2)(5+), 92 mV for Ru(2)(7+)/Ru(2)(6+), and 179 mV for R-salpy(-)/R-salpy(2)(-). For 3, the singly oxidized and reduced species, Ru(2)(6+) and Ru(2)(4+), respectively, generated by bulk controlled-potential electrolyses were finally monitored by spectroscopy. The singly oxidized species can also be slowly generated by air oxidation.     

Enhancement of metal-metal coupling at a considerable distance by using 4-pyridinealdazine as a bridging ligand in polynuclear complexes of rhenium and ruthenium

Novel polynuclear complexes of rhenium and ruthenium containing PCA (PCA = 4-pyridinecarboxaldehyde azine or 4-pyridinealdazine or 1,4-bis(4-pyridyl)-2,3-diaza-1,3-butadiene) as a bridging ligand have been synthesized as PF(6-) salts and characterized by spectroscopic, electrochemical, and photophysical techniques. The precursor mononuclear complex, of formula [Re(Me(2)bpy)(CO)(3)(PCA)](+) (Me(2)bpy = 4,4'-dimethyl-2,2'-bipyridine), does not emit at room temperature in CH(3)CN, and the transient spectrum found by flash photolysis at lambda(exc) = 355 nm can be assigned to a MLCT (metal-to-ligand charge transfer) excited state [(Me(2)bpy)(CO)(3)Re(II)(PCA(-))](+), with lambda(max) = 460 nm and tau < 10 ns. The spectral properties of the related complexes [[Re(Me(2)bpy)(CO)(3)}(2)(PCA)](2+), [Re(CO)(3)(PCA)(2)Cl], and [Re(CO)(3)Cl](3)(PCA)(4) confirm the existence of this low-energy MLCT state. The dinuclear complex, of formula [(Me(2)bpy)(CO)(3)Re(I)(PCA)Ru(II)(NH(3))(5)](3+), presents an intense absorption in the visible spectrum that can be assigned to a MLCT d(pi)(Ru) --> pi(PCA); in CH(3)CN, the value of lambda (max) = 560 nm is intermediate between those determined for [Ru(NH(3))(5)(PCA)](2+) (lambda(max) = 536 nm) and [(NH(3))(5)Ru(PCA)Ru(NH(3))(5)](4+) (lambda(max) = 574 nm), indicating a significant decrease in the energy of the pi-orbital of PCA. The mixed-valent species, of formula [(Me(2)bpy)(CO)(3)Re(I)(PCA)Ru(III)(NH(3))(5)](4+), was obtained in CH(3)CN solution, by bromine oxidation or by controlled-potential electrolysis at 0.8 V in a OTTLE cell of the [Re(I),Ru(II)] precursor; the band at lambda(max) = 560 nm disappears completely, and a new band appears at lambda(max) = 483 nm, assignable to a MMCT band (metal-to-metal charge transfer) Re(I) --> Ru(III). By using the Marcus-Hush formalism, both the electronic coupling (H(AB)) and the reorganization energy (lambda) for the metal-to-metal intramolecular electron transfer have been calculated. Despite the considerable distance between both metal centers (approximately 15.0 Angstroms), there is a moderate coupling that, together with the comproportionation constant of the mixed-valent species [(NH(3))(5)Ru(PCA)Ru(NH(3))(5)](5+) (K(c) approximately 10(2), in CH(3)CN), puts into evidence an unusual enhancement of the metal-metal coupling in the bridged PCA complexes. This effect can be accounted for by the large extent of "metal-ligand interface", as shown by DFT calculations on free PCA. Moreover, lambda is lower than the driving force -DeltaG degrees for the recombination charge reaction [Re(II),Ru(II)] --> [Re(I),Ru(III)] that follows light excitation of the mixed-valent species. It is then predicted that this reverse reaction falls in the Marcus inverted region, making the heterodinuclear [Re(I),Ru(III)] complex a promising model for controlling the efficiency of charge-separation processes.     

Factors affecting the electrochemical and spectroelectrochemical properties of diruthenium(III,II) complexes containing four identical unsymmetrical bridging ligands

Factors affecting the electrochemical and spectroelectrochemical properties of diruthenium(III,II) complexes containing four unsymmetrical bridging ligands are reported for seven related compounds which were isolated in one or two of the four possible isomeric forms. The investigated compounds are represented as Ru(2)(2-CH(3)ap)(4)Cl, Ru(2)(2,5-F(2)ap)(4)Cl, Ru(2)(2,6-F(2)ap)(4)Cl, and Ru(2)(2,4,6-F(3)ap)(4)Cl where 2-CH(3)ap, 2,5-F(2)ap, 2,6-F(2)ap, and 2,4,6-F(3)ap are, respectively, the 2-(2-methylanilino)pyridinate anion, the 2-(2,5-difluoroanilino)pyridinate anion, the 2-(2,6-difluoroanilino)pyridinate anion, and the 2-(2,4,6-trifluoroanilino)pyridinate anion. Ru(2)(2-CH(3)ap)(4)Cl and Ru(2)(2,5-F(2)ap)(4)Cl exist only in a (4,0) conformation while Ru(2)(2,4,6-F(3)ap)(4)Cl is present in both (3,1) and (4,0) isomeric forms. Ru(2)(2,6-F(2)ap)(4)Cl also exists in two isomeric forms, but only the (3,1) isomer was generated in sufficient quantities to be isolated and structurally characterized. This series of seven closely related metal-metal bonded complexes thus provides the first possibility to systematically examine how differences in position and number of the electron-donating or electron-withdrawing groups on the anionic bridging ligands might be related to the electronic properties and structural features of the compound as well as the type and number of geometric isomers which are formed. Each diruthenium derivative undergoes three one-electron transfers in CH(2)Cl(2) containing 0.1 M tetra-n-butylammonium perchlorate (TBAP). The first reduction and first oxidation products were characterized by thin-layer UV-vis spectroelectrochemistry, and the spectroscopic data, along with E(1/2) values, were then related via linear free energy relationships to the type of isomer and/or position of the electron-donating or electron-withdrawing substituents on the anionic ap bridge. The electrogenerated Ru(2)(6+) and Ru(2)(4+) forms of the compounds were assigned on the basis of electrochemical and UV-vis spectroscopic data as having the electronic configuration sigma(2)pi(4)delta(2)pi(2) and sigma(2)pi(4)delta(2)pi(3)delta, respectively, and seemed to be independent of the isomer type ((3,1) or (4,0)). The spectral and electrochemical properties of the compounds both vary substantially as a function of the isomer type, but this is not reflected in the structural features of the compounds which are within the range of what is seen for other Ru(2)(5+) species described in the literature. The Ru-Ru bond lengths of the four structurally characterized (4,0) isomers of the ap complexes range from 2.275 to 2.296 A while those of the three structurally characterized (3,1) isomers of ap derivatives fall in the range 2.284-2.286 A and show no significant difference among the three compounds. The Ru-Cl bond lengths of the (3,1) isomers do not vary significantly with the bridging ligand and range from 2.458 to 2.471 A whereas those of the (4,0) isomers range from 2.437 to 2.487 A and show larger variations among the compounds. The Ru-Ru-Cl bond angle is virtually independent of the bridging ligand in the case of the (4,0) isomers but decreases with the electron-withdrawing effect of the substituent in the case of the (3,1) isomers.     

A regenerable ruthenium tetraammine nitrosyl complex immobilized on a modified silica gel surface: preparation and studies of nitric oxide release and nitrite-to-NO conversion

Silica gel bearing isonicotinamide groups was prepared by further modification of 3-aminopropyl-functionalized silica by a reaction with isonicotinic acid and 1,3-dicyclohexylcarbodiimide to yield 3-isonicotinamidepropyl-functionalized silica gel (ISNPS). This support was characterized by means of infrared spectroscopy, elemental analysis, and specific surface area. The ISNPS was used to immobilize the [Ru(NH(3))(4)SO(3)] moiety by reaction with trans-[Ru(NH(3))(4)(SO(2))Cl]Cl, yielding [Si(CH(2))(3)(isn)Ru(NH(3))(4)(SO(3))]. The related immobilized [Si(CH(2))(3)(isn)Ru(NH(3))(4)(L)](3+/2+) (L=SO(2), SO(2-)(4), OH(2), and NO) complexes were prepared and characterized by means of UV-vis and IR spectroscopy, as well as by cyclic voltammetry. Syntheses of the nitrosyl complex were performed by reaction of the immobilized ruthenium ammine [Si(CH(2))(3)(isn)Ru(NH(3))(4)(OH(2))](2+) with nitrite in acid or neutral (pH 7.4) solution. The similar results obtained in both ways indicate that the aqua complex was able to convert nitrite into coordinated nitrosyl. The reactivity of [Si(CH(2))(3)(isn)Ru(NH(3))(4)(NO)](3+) was investigated in order to evaluate the nitric oxide (NO) release. It was found that, upon light irradiation or chemical reduction, the immobilized nitrosyl complex was able to release NO, generating the corresponding Ru(III) or Ru(II) aqua complexes, respectively. The NO material could be regenerated from these NO-depleted materials obtained photochemically or by reduction. Regeneration was done by reaction with nitrite in aqueous solution (pH 7.4). Reduction-regeneration cycles were performed up to three times with no significant leaching of the ruthenium complex.     

Static and dynamic quenching of Ru(II) polypyridyl excited states by iodide

The metal-to-ligand charge-transfer (MLCT) excited states of Ru(bpy)(2)(deeb)(PF(6))(2), where bpy is 2,2-bipyridine and deeb is 4,4'-(CO(2)CH(2)CH(3))(2)-2,2'-bipyridine, in dichloromethane were found to be efficiently quenched by iodide at room temperature. The ionic strength dependence of the UV-visible absorption spectra gave evidence for ion pairing. Iodide was found to quench the excited states by static and dynamic mechanisms. Stern-Volmer and Benesi-Hildebrand analysis of the spectral data provided a self-consistent estimate of the iodide-Ru(bpy)(2)(deeb)(2+) adduct in dichloromethane, K = 59 700 M(-1). Transient absorption studies clearly demonstrated an electron-transfer quenching mechanism with transient formation of I(2)(*)(-) in high yield, phi = 0.25 for 355 or 532 nm excitation. For Ru(bpy)(2)(deeb)(PF(6))(2) in acetonitrile, similar behavior could be observed at higher iodide concentrations than that required in dichloromethane. The parent Ru(bpy)(3)(2+) compound also ion pairs with iodide in CH(2)Cl(2), and light excitation gave a higher I(2)(*)(-) yield, phi = 0.50. X-ray crystallographic, IR, and Raman data gave evidence for interactions between iodide and the coordinated deeb ligand in the solid state.     

Substituent and isomer effects on structural, spectroscopic, and electrochemical properties of dirhodium(III,II) complexes containing four identical unsymmetrical bridging ligands

Substituent and isomer effects on the structural, spectroscopic, (UV-visible and ESR) and electrochemical properties of dirhodium(III,II) complexes containing four identical unsymmetrical bridging ligands are reported for seven related compounds of the type Rh(2)(L)(4)Cl where L = 2-(2-fluoroanilino)pyridinate (2-Fap), 2-(2,6-difluoroanilino)pyridinate (2,6-F(2)ap), 2-(2,4,6-trifluoroanilino)pyridinate (2,4,6-F(3)ap), or 2-(2,3,4,5,6-pentafluoroanilino)pyridinate (F(5)ap) anion. Rh(2)(2-Fap)(4)Cl exists only in a (4,0) isomeric conformation while Rh(2)(2,6-F(2)ap)(4)Cl, Rh(2)(2,4,6-F(3)ap)(4)Cl, and Rh(2)(F(5)ap)(4)Cl exist as both (4,0) and (3,1) isomers. It had earlier been demonstrated that Rh(2)(L)(4)Cl complexes can adopt different geometric conformations of the bridging ligands, but the current study provides the first example where two geometric isomers of Rh(2)(5+) complexes are obtained for one compound using the same synthetic procedure. The synthesis, structural, spectroscopic, and/or electrochemical properties of (3,1) Rh(2)(2,6-F(2)ap)(4)CN and (4,0) Rh(2)(2,4,6-F(3)ap)(4)(C triple bond C)(2)Si(CH(3))(3) are also reported and the data on these compounds is discussed in light of their parent complexes, (3,1) Rh(2)(2,6-F(2)ap)(4)Cl and (4,0) Rh(2)(2,4,6-F(3)ap)(4)Cl.     

Thiophenolato-bridged dinuclear arene ruthenium complexes: a new family of highly cytotoxic anticancer agents

New cationic diruthenium complexes of the type [(arene)(2)Ru(2)(SPh)(3)](+), arene being C(6)H(6), p-(i)PrC(6)H(4)Me, C(6)Me(6), C(6)H(5)R, where R = (CH(2))(n)OC(O)C(6)H(4)-p-O(CH(2))(6)CH(3) or (CH(2))(n)OC(O)CH=CHC(6)H(4)-p-OCH(3) and n = 2 or 4, are obtained from the reaction of the corresponding precursor [(arene)RuCl(2)](2) and thiophenol and isolated as their chloride salts. The complexes have been fully characterised by spectroscopic methods and the solid state structure of [(C(6)H(6))(2)Ru(2)(SPh)(3)](+), crystallised as the hexafluorophosphate salt, has been established by single crystal X-ray diffraction. The complexes are highly cytotoxic against human ovarian cancer cells (cell lines A2780 and A2780cisR), with the IC(50) values being in the submicromolar range. In comparison the analogous trishydroxythiophenolato compounds [(arene)(2)Ru(2)(S-p-C(6)H(4)OH)(3)]Cl (IC(50) values around 100 μM) are much less cytotoxic. Thus, it would appear that the increased antiproliferative effect of the arene ruthenium complexes is due to the presence of the phenyl or toluyl substituents at the three thiolato bridges.     

Chemical control on the coordination mode of benzaldehyde semicarbazone ligands. synthesis, structure, and redox properties of ruthenium complexes

Reaction of benzaldehyde semicarbazone (HL-R, where H is a dissociable proton and R is a substituent (R = OMe, Me, H, Cl, NO(2)) at the para position of the phenyl ring) with [Ru(PPh(3))(3)Cl(2)] and [Ru(PPh(3))(2)(CO2)Cl2] has afforded complexes of different types. When HL-NO(2) and [Ru(PPh(3))(3)Cl2] react in solution at ambient temperature, trans-[Ru(PPh(3))(2)(L-NO2Cl] is obtained. Its structure determination by X-ray crystallography shows that L-NO2 is coordinated as a tridentate C,N,O-donor ligand. When reaction between HL-NO2 and [Ru(PPh(3))(3)Cl2] is carried out in refluxing ethanol, a more stable cis isomer of [Ru(PPh(3))(2)(L-NO2)Cl] is obtained. The trans isomer can be converted to the cis isomer simply by providing appropriate thermal energy. Slow reaction of HL-R with [Ru(PPh(3))(2)(CO2)Cl2] in solution at ambient temperature yields 5-[Ru(PPh(3))(2)(L-R)(CO)Cl] complexes. A structure determination of 5-[Ru(PPh(3))(2)(L-NO2)(CO)Cl] shows that the semicarbazone ligand is coordinated as a bidentate N,O-donor, forming a five-membered chelate ring. When reaction between HL-R and [Ru(PPh(3))(2)(CO2Cl2] is carried out in refluxing ethanol, the 4-[Ru(PPh(3))(2)(L-R)(CO)Cl] complexes are obtained. A structure determination of 4-[Ru(PPh(3))(2)(L-NO2)(CO)Cl] shows that a semicarbazone ligand is bound to ruthenium as a bidentate N,O-donor, forming a four-membered chelate ring. All the complexes are diamagnetic (low-spin d(6), S = 0). The trans- and cis-[Ru(PPh(3))(2)(L-NO2)Cl] complexes undergo chemical transformation in solution. The 5- and 4-[Ru(PPh(3))(2)(L-R)(CO)Cl] complexes show sharp NMR signals and intense MLCT transitions in the visible region. Cyclic voltammetry of the 5-[Ru(PPh(3))(2)(L-R)(CO)Cl] and 4-[Ru(PPh(3))(2)(L-R)(CO)Cl] complexes show the Ru(II)-Ru(III) oxidation to be within 0.66-1.07 V. This oxidation potential is found to linearly correlate with the Hammett constant of the substituent R.     

Reactions of acetonitrile coordinated to a nitrosylruthenium complex with H2O or CH(3)OH under mild conditions: structural characterization of imido-type complexes

The reaction of cis-[Ru(NO)(CH(3)CN)(bpy)(2)](3+) (bpy = 2,2'-bipyridine) in H(2)O at room temperature proceeded to afford two new nitrosylruthenium complexes. These complexes have been identified as nitrosylruthenium complexes containing the N-bound methylcarboxyimidato ligand, cis-[Ru(NO)(NH=C(O)CH(3))(bpy)(2)](2+), and methylcarboxyimido acid ligand, cis-[Ru(NO)(NH=C(OH)CH(3))(bpy)(2)](3+), formed by an electrophilic reaction at the nitrile carbon of the acetonitrile coordinated to the ruthenium ion. The X-ray structure analysis on a single crystal obtained from CH(3)CN-H(2)O solution of cis-[Ru(NO)(NH=C(O)CH(3))(bpy)(2)](PF(6))(3) has been performed: C(22)H(20.5)N(6)O(2)P(2.5)F(15)Ru, orthorhombic, Pccn, a = 15.966(1) A, b = 31.839(1) A, c = 11.707(1) A, V = 5950.8(4) A(3), and Z = 8. The structural results revealed that the single crystal consisted of 1:1 mixture of cis-[Ru(NO)(NH=C(O)CH(3))(bpy)(2)](2+) and cis-[Ru(NO)(NH=C(OH)CH(3))(bpy)(2)](3+) and the structural formula of this single crystal was thus [Ru(NO)(NH=C(OH(0.5))CH(3))(bpy)(2)](PF(6))(2.5). The reaction of cis-[Ru(NO)(CH(3)CN)(bpy)(2)](3+) in dry CH(3)OH-CH(3)CN at room temperature afforded a nitrosylruthenium complex containing the methyl methylcarboxyimidate ligand, cis-[Ru(NO)(NH=C(OCH(3))CH(3))(bpy)(2)](3+). The structure has been determined by X-ray structure analysis: C(25)H(29)N(8)O(18)Cl(3)Ru, monoclinic, P2(1)/c, a = 13.129(1) A, b = 17.053(1) A, c = 15.711(1) A, beta = 90.876(5) degrees, V = 3517.3(4) A(3), and Z = 4.     

Synthesis and characterization of nitrosyl diruthenium complexes. Interaction between NO and CO across the metal-metal bond

Two neutral diruthenium complexes and one anionic diruthenium complex, Ru2(dpf)4(NO), Ru2(dpf)4(NO)2, and [Ru2(dpf)4(NO)]-, where dpf is diphenylformamidinate anion, were synthesized and characterized as to their electrochemical and spectroscopic properties. Two of the compounds, Ru2(dpf)4(NO) and Ru2(dpf)4(NO)2, were also structurally characterized. Ru2(dpf)4(NO) undergoes reversible one-electron reductions under N2 at E1/2=0.06 and -1.24 V in CH2Cl2, 0.1 M TBABr. These processes are shifted to E1/2=0.18 and -0.78 V under CO due to the trans-coordination of a CO molecule which stabilizes the singly and doubly reduced forms of the metal-metal bonded complexes, thus leading to easier reductions. CO does not coordinate to Ru2(dpf)4(NO), but it does bind to the singly reduced species to generate [Ru2(dpf)4(NO)(CO)]- under a CO atmosphere in solution; characteristic NO and CO bands are seen for this compound at nuNO=1674 cm(-1) and nuCO=1954 cm(-1). Ru2(dpf)4(NO)2 displays a reversible one-electron reduction at E1/2=-1.24 V versus SCE and an irreversible reduction at Epc=-1.96 V in CH2Cl2, 0.1 M TBAP under N2. There are also two reversible one-electron oxidations at E1/2=0.24 and 1.15 V. Spectroelectrochemical monitoring of the Ru2(dpf)4(NO)2 oxidation processes in a thin-layer cell shows only a single NO vibration for each electrogenerated product and nuNO is located at 1726 (neutral), 1788 (singly oxidized), or 1834 (doubly oxidized) cm(-1). Finally, a labile CO complex, [Ru2(dpf)4(NO)(CO)]-, could be generated by passing CO into a solution of [Ru2(dpf)4(NO)]-. Formation of the mixed CO/NO adduct was confirmed by electrochemistry and infrared spectroscopy. Analysis of the NO and CO stretching vibration frequencies for [Ru2(dpf)4(NO)(CO)]- by in-situ FTIR spectroelectrochemistry and comparisons with data for Ru2(dpf)4(NO) and Ru2(dpf)4(CO) reveal the presence of a strong interaction between NO and CO across the Ru-Ru bond.