State of the art theoretical study and comparison to experiment for the phenol...argon complex

The phenol...argon complex was studied by means of various high level ab initio quantum mechanics methods and high resolution threshold ionization spectroscopy. The structure and stabilization energy of different conformers were determined. Stabilization energy of van der Waals bonded and H-bonded PhOH...Ar complex determined at CCSD(T) complete basis set (CBS) level for CP-RI-MP2/cc-pVTZ/Ar aug-cc-pVTZ geometries amount to 434 and 285 cm(-1). The CCSD(T)/CBS were constructed either as a sum of MP2/CBS interaction energy and CCSD(T) correction term [difference between CCSD(T) and MP2 correlation energies determined with medium basis set] or directly from CCSD(T)/aug-cc-pVDZ and aug-cc-pVTZ energies. Both schemes provide very similar values. Harmonic vibrational analysis revealed that the H-bonded structure does not represent energy minimum but first order transition structure. The respective imaginary vibrational mode (16 cm(-1)) connects two possible argon locations -- above and below the phenol aromatic ring. Including the DeltaZPVE, we obtained stabilization enthalpy at 0 K of 389 cm(-1). This value is marginally higher (25-35 cm(-1), 0.07-0.10 kcal/mol) than the experimental value. The determination of DeltaZPVE constitutes the most significant error and possible improvements should come from more accurate evaluation of the (nonharmonic) vibrational frequencies.     

A hierarchical family of three-dimensional potential energy surfaces for He-CO

A hierarchical family of five three-dimensional potential energy surfaces has been developed for the benchmark He-CO system. Four surfaces were obtained at the coupled cluster singles and doubles level of theory with a perturbational estimate of triple excitations, CCSD(T), and range in quality from the doubly augmented double-zeta basis set to the complete basis set (CBS) limit. The fifth corresponds to an approximate CCSDT/CBS surface (CCSD with iterative triples/CBS, denoted CBS+corr). The CBS limit results were obtained by pointwise basis set extrapolations of the individual counterpoise-corrected interaction energies. For each surface, over 1000 interaction energies were accurately interpolated using a reproducing kernel Hilbert space approach with an R-6+R-7 asymptotic form. In each case, both three-dimensional and effective two-dimensional surfaces were developed. In standard Jacobi coordinates, the final CBS+corr surface has a global minimum at rCO=2.1322a0,R=6.418a0, and gamma=70.84 degrees with a well depth of -22.34 cm-1. The other four surfaces have well depths ranging from -14.83 cm-1 [CCSD(T)/d-aug-cc-pVDZ] to -22.02 cm-1 [CCSD(T)/CBS]. For each of these surfaces the infrared spectrum has been accurately calculated and compared to experiment, as well as to previous theoretical and empirical surfaces. The final CBS+corr surface exhibits root-mean-square and maximum errors compared to experiment (4He) of just 0.03 and 0.04 cm-1, respectively, for all 42 transitions and is the most accurate ab initio surface to date for this system. Other quantities investigated include the interaction second virial coefficient, the integral cross sections, and thermal rate coefficients for rotational relaxation of CO by He, and rate coefficients for CO vibrational relaxation by He. All the observable quantities showed a smooth convergence with respect to the quality of the underlying interaction surface.     

Ab initio based potential energy surfaces and Franck-Condon analysis of ionization thresholds of cyclic-C3H and linear-C3H

We report a Franck-Condon analysis in reduced dimensionality of the ionization thresholds of linear(l)-C3H and cyclic(c)-C3H using MP2-based potential energy surfaces and CCSD(T)/aug-cc-pVTZ calculations of electronic energies at selected geometries. The potential energy surfaces are fits to tens of thousands of MP2/aug-cc-pVTZ energies for the neutral and cation systems. These fits properly describe the invariance of the potential with respect to all permutations of the three C atoms. The realism of the potential surfaces is assessed by comparing stationary-point structures, energies, and normal-mode frequencies with previous high-level ab initio calculations. Several key vibrational modes in this ionization process are located at saddle points and so a numerical approach to obtain the Franck-Condon factors for those modes is done. On the basis of this analysis combined with a simple harmonic treatment of the energies of the remaining modes and key electronic energy differences obtained with CCSD(T)/aug-cc-pVTZ calculations, we find the threshold ionization energy of l-C3H to be 9.06 eV and for c-C3H we estimate the threshold to be in the range 9.70-9.76 eV. We estimate these values are accurate to within +/-0.05 eV.     

Ab initio and analytic intermolecular potentials for Ar-CF4

Ab initio calculations at the CCSD(T) level of theory were performed to characterize the Ar + CF4 intermolecular potential. Potential energy curves were calculated with the aug-cc-pVTZ basis set, and with and without a correction for basis set superposition error (BSSE). Additional calculations were performed with other correlation consistent basis sets to extrapolate the Ar-CF4 potential energy minimum to the complete basis set (CBS) limit. Both the size of the basis set and BSSE have substantial effects on the Ar + CF4 potential. Calculations with the aug-cc-pVTZ basis set, and with a BSSE correction, appear to give a good representation of the BSSE corrected potential at the CBS limit. In addition, MP2 theory is found to give potential energies in very good agreement with those determined by the much higher level CCSD(T) theory. Two model analytic potential energy functions were determined for Ar + CF4. One is a fit to the aug-cc-pVTZ calculations with a BSSE correction. The second was derived by fitting an average BSSE corrected potential, which is an average of the CCSD(T)/aug-cc-pVTZ potentials with and without a BSSE correction. These analytic functions are written as a sum of two-body potentials and excellent fits to the ab initio potentials are obtained by representing each two-body interaction as a Buckingham potential.     

Benchmark database of accurate (MP2 and CCSD(T) complete basis set limit) interaction energies of small model complexes, DNA base pairs, and amino acid pairs

MP2 and CCSD(T) complete basis set (CBS) limit interaction energies and geometries for more than 100 DNA base pairs, amino acid pairs and model complexes are for the first time presented together. Extrapolation to the CBS limit is done by using two-point extrapolation methods and different basis sets (aug-cc-pVDZ - aug-cc-pVTZ, aug-cc-pVTZ - aug-cc-pVQZ, cc-pVTZ - cc-pVQZ) are utilized. The CCSD(T) correction term, determined as a difference between CCSD(T) and MP2 interaction energies, is evaluated with smaller basis sets (6-31G** and cc-pVDZ). Two sets of complex geometries were used, optimized or experimental ones. The JSCH-2005 benchmark set, which is now available to the chemical community, can be used for testing lower-level computational methods. For the first screening the smaller training set (S22) containing 22 model complexes can be recommended. In this case larger basis sets were used for extrapolation to the CBS limit and also CCSD(T) and counterpoise-corrected MP2 optimized geometries were sometimes adopted.     

Ab initio and direct quasiclassical-trajectory study of the Cl + CH4-->HCl + CH3 reaction

We present an electronic structure and dynamics study of the Cl + CH(4)--> HCl + CH(3) reaction. We have characterized the stationary points of the ground-state potential-energy surface using various electronic structure methods and basis sets. Our best calculations, CCSD(T) extrapolated to the complete basis-set limit based on geometries and harmonic frequencies obtained at the CCSD(T)/aug-cc-pvtz level, are in agreement with the experimental reaction energy and indirect measurements of the barrier height. Using ab initio information, we have reparametrized a semiempirical Hamiltonian so that the predictions of the improved Hamiltonian agree with the higher-level calculations in various regions of the potential-energy surface. This improved semiempirical Hamiltonian is then used to propagate quasiclassical trajectories and characterize the reaction dynamics. The good agreement of the calculated HCl rotational and angular distributions with the experiment indicates that reparametrizing semiempirical Hamiltonians is a promising approach to derive accurate potential-energy surfaces for polyatomic reactions. However, excessive energy leakage from the initial vibrational energy of the CH(4) molecule to the reaction coordinate in the trajectory calculations calls into question the suitability of the standard quasiclassical-trajectory method to describe energy partitioning in polyatomic reactions.     

Computational studies on the ground and excited states of BrOOBr

In this work, theoretical computations for the ground and excited states of BrOOBr have been performed at high-level ab initio molecular orbital theories. The ground-state geometries of BrOOBr in different forms (trans, cis, and twist form) have been optimized at the couple-cluster CCSD(T) level of theory with cc-pVTZ and aug-cc-pVTZ basis sets, which indicates that at CCSD(T)/cc-pVTZ level of theory, the twist form is 4.96 kcal/mol more stable than the trans form and 10.67 kcal/mol more stable than the cis form; at the CCSD(T)/aug-cc-pVTZ basis set the twist form is 4.33 kcal/mol more stable than the trans form and 9.54 kcal/mol more stable than the cis form. The vertical excitation energies and potential-energy curves for the singlet and triplet low-lying excited states of BrOOBr were calculated at both the complete active space self-consistent-field (CASSCF) level of theory and the multireference internally contracted configuration interaction (MRCI) level of theory. The differences of potential-energy curves at CASSCF and MRCI levels of theory are found for the BrOOBr excited states. At CASSCF level of theory, none of the BrOOBr excited states are bound. However, at MRCI level of theory, all the BrOOBr states studied in this work are bound or slightly bound at the Frank-Condon region. In addition, the scalar relativistic effect and the spin-orbital coupling effect on the vertical excitation energies of the electronic states of BrOOBr were estimated.     

Calculation of the O-H stretching vibrational overtone spectrum of the water dimer

The O-H stretching vibrational overtone spectrum of the water dimer has been calculated with the dimer modeled as two individually vibrating monomer units. Vibrational term values and absorption intensities have been obtained variationally with a computed dipole moment surface and an internal coordinate Hamiltonian, which consists of exact kinetic energy operators within the Born-Oppenheimer approximation of the monomer units. Three-dimensional ab initio potential energy and dipole moment surfaces have been calculated using the internal coordinates of the monomer units using the coupled cluster method including single, double, and perturbative triple excitations [CCSD(T)] with the augmented correlation consistent valence triple zeta basis set (aug-cc-pVTZ). The augmented correlation consistent valence quadruple zeta basis set (aug-cc-pVQZ), counterpoise correction, basis set extrapolation to the complete basis set limit, relativistic corrections, and core and valence electron correlations effects have been included in one-dimensional potential energy surface cuts. The aim is both to investigate the level of ab initio and vibrational calculations necessary to produce accurate results when compared with experiment and to aid the detection of the water dimer under atmospheric conditions.     

Ab initio potential energy and dipole moment surfaces of (H2O)2

A full-dimensional ab initio potential energy surface (PES) and dipole moment surface (DMS) are reported for the water dimer, (H2O)2. The CCSD(T)-PES is a very precise fit to 19,805 ab initio energies obtained with the coupled-cluster (CCSD(T)) method, using an aug-cc-pVTZ basis. The standard counterpoise correction was applied to approximately eliminate basis set superposition errors. The fit is based on an approach that incorporates the permutational symmetry of identical atoms [Huang, X.; Braams, B.; Bowman, J. M. J. Chem.Phys. 2005, 122, 044308]. The DMS is a fit to the dipole moment obtained with M?ller-Plesset (MP2) theory, using an aug-cc-pVTZ basis. The PES has an RMS fitting error of 31 cm(-1) for energies below 20,000 cm(-1), relative to the global minimum. This surface can describe various internal floppy motions, including various monomer inversions, and isomerization pathways. Ten characteristic stationary points have been located on the surface, four of which are transition structures and the rest are higher order saddle points. Their geometrical and vibrational properties are presented and compared with available previous theoretical work. The CCSD(T)-PES and MP2-DMS dissociate correctly (and symmetrically) to two H2O monomers, with D(e) = 1665.7 cm(-1) (19.93 kJ/mol). Accurate quantum calculations of the zero-point energy of the dimer (using diffusion Monte Carlo) and the monomers (using a vibrational configuration interaction approach) are reported, and these together with D(e) give a value of D0 of 1042 cm(-1) (12.44 kJ/mol). A best estimated value is 1130 cm(-1) (13.5 kJ/mol).     

On the existence and lifetimes of Cu2+ complexes with water, ammonia, and hydrogen cyanide

High-level ab initio calculations have been carried out to evaluate the lifetimes of complexes formed by the association of Cu2+ to water, ammonia, and hydrogen cyanide. The corresponding binding energies were evaluated at the CCSD(T)6-311+G(3df,2pd) level of theory. The potential-energy curves corresponding to their dissociation into Cu+ + L+ (L=H2O, NH3, and HCN) were obtained at the CCSD(T)6-311+G(3df,2p) level on BHLYP6-311+G(d,p) optimized geometries. Lifetimes were calculated using the exterior complex scaling and the semiclassical WKB methods. Although all the complexes investigated are thermodynamically unstable with respect to their dissociation into Cu+ + L+ in a typical Coulomb explosion, the activation barrier is high enough to accommodate several vibrational resonances, with very large lifetimes. As a matter of fact, if the three complexes are produced in the lowest vibrational levels, they behave as totally bound (with almost infinite lifetime) species.     

Kinetic isotope effects for Cl + CH4 ⇌ HCl + CH3 calculated using ab initio semiclassical transition state theory

Calculations were carried out for 25 isotopologues of the title reaction for various combinations of (35)Cl, (37)Cl, (12)C, (13)C, (14)C, H, and D. The computed rate constants are based on harmonic vibrational frequencies calculated at the CCSD(T)/aug-cc-pVTZ level of theory and X(ij) vibrational anharmonicity coefficients calculated at the CCSD(T) /aug-cc-pVDZ level of theory. For some reactions, anharmonicity coefficients were also computed at the CCSD(T)/aug-cc-pVTZ level of theory. The classical reaction barrier was taken from Eskola et al. [J. Phys. Chem. A 2008, 112, 7391-7401], who extrapolated CCSD(T) calculations to the complete basis set limit. Rate constants were calculated for temperatures from ～100 to ～2000 K. The computed ab initio rate constant for the normal isotopologue is in good agreement with experiments over the entire temperature range (～10% lower than the recommended experimental value at 298 K). The ab initio H/D kinetic isotope effects (KIEs) for CH(3)D, CH(2)D(2), CHD(3), and CD(4) are in very good agreement with literature experimental data. The ab initio (12)C/(13)C KIE is in error by ～2% at 298 K for calculations using X(ij) coefficients computed with the aug-cc-pVDZ basis set, but the error is reduced to ～1% when X(ij) coefficients computed with the larger aug-cc-pVTZ basis set are used. Systematic improvements appear to be possible. The present SCTST results are found to be more accurate than those from other theoretical calculations. Overall, this is a very promising method for computing ab initio kinetic isotope effects.     

Structural and spectroscopic study of the van der Waals complex of CO with HCO+ and the isoelectronic complex of CS with HCS+

This work reports the results of high level ab initio calculations of the OC-HCO(+) complex and the SC-HCS(+) complex and their hydrogen migration transition states. Geometry optimizations are performed at the CCSD(T)/aug-cc-pV5Z level of theory. Subsequent frequency calculations are carried out at the CCSD(T)/aug-cc-pVQZ level of theory. Additional geometry optimizations and harmonic frequency calculations for all the species involved in this study have been done with the explicitly correlated CCSD(T)-F12 method with the aug-cc-pVTZ and VTZ-F12 basis set. The geometries, rotational constants, harmonic vibrational frequencies, and energetics of the species involved in the complex are reported. These methods result in accurate computational predictions that have mean deviations for bond lengths, rotational constants, and vibrational frequencies of 0.001 A?, 163 MHz, and 46 cm(-1), respectively. These results provide essential spectroscopic properties for the complexes that can facilitate both laboratory and interstellar observations, and they also provide a comparison between oxygen and sulfur complex observability based on thermodynamic stability.     

Ab initio calculations on halogen-bonded complexes and comparison with density functional methods

A systematic theoretical investigation on a series of dimeric complexes formed between some halocarbon molecules and electron donors has been carried out by employing both ab initio and density functional methods. Full geometry optimizations are performed at the Moller-Plesset second-order perturbation (MP2) level of theory with the Dunning's correlation-consistent basis set, aug-cc-pVDZ. Binding energies are extrapolated to the complete basis set (CBS) limit by means of two most commonly used extrapolation methods and the aug-cc-pVXZ (X = D, T, Q) basis sets series. The coupled cluster with single, double, and noniterative triple excitations [CCSD(T)] correction term, determined as a difference between CCSD(T) and MP2 binding energies, is estimated with the aug-cc-pVDZ basis set. In general, the inclusion of higher-order electron correlation effects leads to a repulsive correction with respect to those predicted at the MP2 level. The calculations described herein have shown that the CCSD(T) CBS limits yield binding energies with a range of -0.89 to -4.38 kcal/mol for the halogen-bonded complexes under study. The performance of several density functional theory (DFT) methods has been evaluated comparing the results with those obtained from MP2 and CCSD(T). It is shown that PBEKCIS, B97-1, and MPWLYP functionals provide accuracies close to the computationally very expensive ab initio methods.     

Accurate MRCI and CC study of the most relevant stationary points and other topographical attributes for the ground-state C(2)H(2) potential energy surface

Extensive ab initio calculations have been performed to determine the energy, geometry, vibrational frequencies, and relative energetics of all stationary points of the C(2)H(2) ground-state potential-energy surface. The geometries of acetylene and vinylidene minima as well as all transition states are reported at the CASSCF, MRCI, and CCSD(T) levels with aug-cc-pVXZ basis sets. Other more advanced levels of CC theory have also been utilized where judged adequate, mostly for check purposes. Also reported are theoretical limiting values of the energetics of the reaction, deduced from series of computations using the USTE extrapolation method. The data here reported should be valuable for modeling a single-sheeted global potential energy surface for the title system.     

Vibrational levels of methanol calculated by the reaction path version of MULTIMODE, using an ab initio, full-dimensional potential

An accurate potential energy surface has been determined for methanol from ab initio potential data at the CCSD(T) level of theory with an aug-cc-pVTZ basis. The resulting potential function is valid over all twelve vibrational degrees of freedom for all near-equilibrium and torsional configurations. A torsional reaction path has been derived for this potential, from which the low-lying vibrational levels of methanol have been calculated by the reaction path version of MULTIMODE. Comparisons with experiment and other calculations are made.     

Nitrous oxide dimer: a new potential energy surface and rovibrational spectrum of the nonpolar isomer

The spectrum of nitrous oxide dimer was investigated by constructing new potential energy surfaces using coupled-cluster theory and solving the rovibrational Schro?dinger equation with a Lanczos algorithm. Two four-dimensional (rigid monomer) global ab initio potential energy surfaces (PESs) were made using an interpolating moving least-squares (IMLS) fitting procedure specialized to describe the interaction of two linear fragments. The first exploratory fit was made from 1646 CCSD(T)/3ZaP energies. Isomeric minima and connecting transition structures were located on the fitted surface, and the energies of those geometries were benchmarked using complete basis set (CBS) extrapolations, counterpoise (CP) corrections, and explicitly correlated (F12b) methods. At the geometries tested, the explicitly correlated F12b method produced energies in close agreement with the estimated CBS limit. A second fit to 1757 data at the CCSD(T)-F12b/VTZ-F12 level was constructed with an estimated fitting error of less than 1.5?cm(-1). The second surface has a global nonpolar O-in minimum, two T-shaped N-in minima, and two polar minima. Barriers between these minima are small and some wave functions have amplitudes in several wells. Low-lying rovibrational wave functions and energy levels up to about 150?cm(-1) were computed on the F12b PES using a discrete variable representation/finite basis representation method. Calculated rotational constants and intermolecular frequencies are in very close agreement with experiment.     

Ab initio and analytic intermolecular potentials for Ar-CH(3)OH

Ab initio calculations at the CCSD(T)/aug-cc-pVTZ level of theory were used to characterize the Ar-CH(3)OH intermolecular potential energy surface (PES). Potential energy curves were calculated for four different Ar + CH(3)OH orientations and used to derive an analytic function for the intermolecular PES. A sum of Ar-C, Ar-O, Ar-H(C), and Ar-H(O) two-body potentials gives an excellent fit to these potential energy curves up to 100 kcal mol(-1), and adding an additional r(-n) term to the Buckingham two-body potential results in only a minor improvement in the fit. Three Ar-CH(3)OH van der Waals minima were found from the CCSD(T)/aug-cc-pVTZ//MP2/aug-cc-pVTZ calculations. The structure of the global minimum is in overall good agreement with experiment (X.-C. Tan, L. Sun and R. L. Kuczkowski, J. Mol. Spectrosc., 1995, 171, 248). It is T-shaped with the hydroxyl H-atom syn with respect to Ar. Extrapolated to the complete basis set (CBS) limit, the global minimum has a well depth of 0.72 kcal mol(-1) with basis set superposition error (BSSE) correction. The aug-cc-pVTZ basis set gives a well depth only 0.10 kcal mol(-1) smaller than this value. The well depths of the other two minima are within 0.16 kcal mol(-1) of the global minimum. The analytic Ar-CH(3)OH intermolecular potential also identifies these three minima as the only van der Waals minima and the structures predicted by the analytic potential are similar to the ab initio structures. The analytic potential identifies the same global minimum and the predicted well depths for the minima are within 0.05 kcal mol(-1) of the ab initio values. Combining this Ar-CH(3)OH intermolecular potential with a potential for a OH-terminated alkylthiolate self-assembled monolayer surface (i.e., HO-SAM) provides a potential to model Ar + HO-SAM collisions.     

A quantum chemistry study of the Cl atom reaction with formaldehyde

The elementary vapor-phase reaction between Cl atoms and HCHO has been studied by ab initio methods. Calculations at the MP2, MP3, MP4(SDTQ), CCSD, CCSD(T), and MRD-CI levels of theory show that the reaction is characterized by a low electronic barrier; excluding the effects of spin-orbit splitting in Cl, our best estimate at the MRD-CI/aug-cc-pVTZ//RHF-RCCSD(T)/aug-cc-pVTZ level of theory predicts a Born-Oppenheimer barrier height of 0.7 kJ mol-1. The energies of the lowest six electronic states as resulting from MRD-CI calculations are presented at discrete points along the reaction path, and two avoided crossings are found in the transition state region. The spin-orbit splitting in Cl is also calculated along the reaction path; it is not negligible in the transition state region and is found to increase the barrier by only 1.4 kJ mol-1 at the RCCSD(T)/aug-cc-pVTZ transition state geometry. The minimum energy path of the reaction connects an energetically weakly stabilized adduct on the flat potential surface on the reactant side and an energetically strongly stabilized postreaction adduct. The reaction rate coefficient and the kinetic isotope effects were calculated using improved canonical variational theory with small curvature tunneling (ICVT/SCT), and the results were compared to experimental data. The experimental reaction rate coefficient is reproduced within its uncertainty limits by variational transition state theory with interpolated single-point energy corrections (ISPE) at the MP4(SDTQ) level of theory and by conventional transition state theory with interpolated optimized energies (IOE) at the MRD-CI//RCCSD(T) level of theory and interpolated optimized geometries at the RCCSD(T) level of theory on an MP2/aug-cc-pVTZ potential energy surface when employing scaled vibrational frequencies.     

Vibrational energies of PH3 calculated variationally at the complete basis set limit

The potential energy surface for the electronic ground state of PH(3) was calculated at the CCSD(T) level using aug-cc-pV(Q+d)Z and aug-cc-pVQZ basis sets for P and H, respectively, with scalar relativistic corrections included. A parametrized function was fitted through these ab initio points, and one parameter of this function was empirically adjusted. This analytical PES was employed in variational calculations of vibrational energies with the newly developed program TROVE. The convergence of the calculated vibrational energies with increasing vibrational basis set size was improved by means of an extrapolation scheme analogous to the complete basis set limit schemes used in ab initio electronic structure calculations. The resulting theoretical energy values are in excellent agreement with the available experimentally derived values.