水合金属卤化物脱水的方法和条件

分析了从水合金属卤化物脱水制备无水金属卤化物的几种方法和条件,如直接加热脱水法,在保护气氛或真空中加热脱水法,先制备成复盐然后加热脱水法,用脱水剂脱水法,以及用有机配位溶剂脱水法等。     

金属卤化物钙钛矿光催化的研究进展

太阳能驱动光催化反应降解污染物、制备化学燃料或其他高附加值产品是绿色化学和可再生能源研究的重要方向.近年来,在传统的金属氧化物半导体材料之外,金属卤化物钙钛矿类化合物凭借其优异的光电特性也被逐步应用于高效光催化反应中.这篇文章综述了以铅卤钙钛矿为主的金属卤化物钙钛矿材料近年来在光催化领域的研究进展,总结了金属卤化物钙钛矿材料在光（电）催化产氢、CO₂还原反应和有机物高附加值转化反应中的应用与反应机制及其关键挑战,最后展望了高效稳定的金属卤化物钙钛矿光催化剂的发展方向和前景.     

ⅡB族金属卤化物与有机分子加成物的倍频性能和晶体结构研究的进展

某些具有倍频活性的有机分子如硫脲和３－甲基－４－硝基吡啶Ｎ－氧等易与ⅡＢ族金属卤化物形成加合物，并呈非心对称晶体结构和有希望非线性光学材料。本文着重总结这些加成物特别是一维配位聚合物的结构特征和倍频性能并展望其研究前景。     

高效、宽带发射有机-无机金属卤化物荧光材料

有机-无机金属卤化物作为一种新兴的发光材料,由于其高的发光效率以及宽的发射光谱等优点受到广泛关注。本文以有机-无机金属卤化物高效荧光材料为对象,根据金属阳离子种类对材料进行归类,探讨其高效发光机理,并提出改善该类材料发光效率的方法。总体而言,对于此类荧光材料的研究还处于起步阶段,其发光机理仍然存在争议,本文对当前主流发光机理进行了总结。最后,对于有机-无机金属卤化物荧光材料的发展前景进行了展望,旨在进一步推动该类材料在荧光转换发光二极管等领域的应用。     

水溶性有机金属化学和催化研究

本文介绍了新兴的水溶性有机金属化学及其在两相催化体系中的应用。     

卤化物固态电解质研究进展

全固态电池因其高能量密度和高安全性而成为具有发展前景的下一代储能技术。开发具有高室温离子电导率、优异化学/电化学稳定性、良好正/负极兼容性的固态电解质是实现全固态电池实用化的关键。卤化物固态电解质因其优异的电化学窗口、高正极稳定性、可接受的室温锂离子电导率等优势,受到了广泛的关注。本文通过对近年来卤化物电解质的相关研究进行总结,综述了该类电解质的组成、结构、离子传导路径及制备方法,并分析了金属卤化物电解质的电导率、稳定性特点,归纳了近年来该电解质在全固态电池中具有代表性的应用,并基于以上总结和分析,指出了卤化物固态电解质的研究难点及发展方向。     

金属卤化物钙钛矿光电材料和器件

2009年ABX₃钙钛矿晶型的甲胺铅卤CH₃NH₃PbX₃(X=I、Br、Cl)钙钛矿材料首次应用于太阳能电池,但初始报道效率低、稳定性差。2012年后,可溶液法制备的钙钛矿太阳能电池凭借其吸光系数高、激子结合能低等优点,迅速表现出低成本和高效率的突出优势,并在光电器件等交叉领域具有很强的应用潜力。因此,钙钛矿太阳能电池被Science杂志评为2013年度国际十大科技进展,是化学和材料领域特别是光伏领域新兴的变革性技术之一。钙钛矿太阳能电池材料与器件的发展一直面临大面积、高效率、稳定性和环境友好性等挑战,对应的是钙钛矿晶体可控生长、缺陷钝化、器件优化材料稳定性和铅毒性等科学问题。     

金属卤化物促进糖类催化转化制备5-羟甲基糠醛

研究了碱金属卤化物对AlCl₃催化葡萄糖转化制备5-羟甲基糠醛（HMF）的促进作用. 结果表明,NaF对反应有显著抑制作用,而NaI和NaBr对反应有显著促进作用,而且NaI比NaBr的促进效果更明显. 在N,N-二甲基乙酰胺（DMAC）中,以NaI为添加剂,130 ℃反应15 min,AlCl₃催化葡萄糖转化制备HMF,葡萄糖转化率由71%提高到86%,HMF收率由36%提高到62%. AlCl₃-NaI-DMAC体系也可用于果糖、甘露糖等单糖,蔗糖、麦芽糖、纤维二糖等二糖,以及菊粉等多糖的转化. 以蔗糖为原料,HMF收率可达63%.     

金属卤化物钙钛矿纳米晶高效发光二极管的制备与器件性能优化

金属卤化物钙钛矿作为一类新型的离子型直接带隙半导体材料在电致发光二极管(LED)中有着重要应用前景. 但实现其应用的前提在于金属卤化物钙钛矿材料需要保持高的发光效率和好的稳定性. 为了提高金属卤化物钙钛矿作为LED发光层的激子结合效率, 从而提升其发光效率, 设计和合成金属卤化物钙钛矿纳米晶材料是一个有效途径. 目前, 基于纳米晶材料设计的金属卤化物钙钛矿LED在绿光和红光(包括近红外光)范围已经展现了高的发光亮度和外量子效率(EQE), 其中最高EQE已经超过了20%, 但其稳定性仍无法满足器件应用的要求. 此外, 更值得关注且更重要的是, 蓝光钙钛矿LED的发光亮度和EQE目前仍然不高. 如何制备高效、 稳定的金属卤化物钙钛矿纳米晶LED, 特别是蓝光LED, 是一个具有重大应用前景且具有挑战性的课题. 本文重点介绍了金属卤化物钙钛矿纳米发光层的结构设计和合成方法及金属卤化物钙钛矿LED的研究进展, 分析了金属卤化物钙钛矿LED不稳定的原因, 并对金属卤化物钙钛矿LED研究面临的挑战和未来发展方向进行了总结与展望.     

Solubilities in the Ternary System Alkali Metal Halide–Glucose–Water

The solubility of glucose was measured in aqueous saturated alkali metal halide (NaF, NaCl, NaBr, NaI, KCl, KBr, and KI) solutions at 30°C. The solubility of glucose in saturated sodium halide solutions is lower than that in water. On the contrary, the solubility of glucose in saturated potassium halide solutions is higher than that in water. The determinations of glucose solubility were also carried out in some unsaturated NaCl or KCl solutions at 30°C. In the case of NaCl, the glucose solubility curve is not simple. It increases slightly at lower NaCl concentrations then decreases gradually with increases NaCl concentration. In the case of KCl, the curve is simple, the solubility of glucose increasing with increases KCl concentration. The determinations of alkali metal chloride solubilities were also carried out in the presence of glucose at 30°C.     

On the Nature of the Bonding in Coinage Metal Halides

This article analyzes the nature of the chemical bond in coinage metal halides using high-level ab initio Valence Bond (VB) theory. It is shown that these bonds display a large Charge-Shift Bonding character, which is traced back to the large Pauli pressure arising from the interaction between the bond pair with the filled semicore d shell of the metal. The gold-halide bonds turn out to be pure Charge-Shift Bonds (CSBs), while the copper halides are polar-covalent bonds and silver halides borderline cases. Among the different halogens, the largest CSB character is found for fluorine, which experiences the largest Pauli pressure from its σ lone pair. Additionally, all these bonds display a secondary but non-negligible π bonding character, which is also quantified in the VB calculations.     

应用人工神经网络预测氢化可的松的溶解度

以量子化学方法在密度泛函B3LYP/6-31G(d)水平上计算得到含有电负性原子的溶剂水、醇类、酮类、酯类、氯代烷烃共17种溶剂的结构参数：最高占用轨道能(EHOMO)、分子最低空轨道能(ELUMO)、分子偶极矩(μ)、分子总能量(Etotal) 、最正原子净电荷(q+)、最负原子净电荷(q-)。采用误差反向传播(BP)算法的三层人工神经网络,确定隐含层节点数为7,建立了EHOMO、ELUMO、μ、Etotal、q+、q-、摩尔体积(VM)、介电常数(ε)、温度(T)共9个参数与氢化可的松在不同温度下不同溶剂中的溶解度之间关系的模型。运用此神经网络模型可预测不同分离条件下氢化可的松的溶解度,平均预测相对误差为7.0%。     

氯磷灰石负载金属卤化物催化芳香化合物的Friedel-Crafts 苄基化反应研究

以氯磷灰石为载体,采用水热法制各了氯磷灰石负载金属卤化物固体酸催化剂,通过IR,XRD对载体和催化剂的结构进行了表征.研究了催化剂对芳香化合物与苄基氯、苄基溴和苄基醇的Friedel-Crafts烷基化反应.结果表明,溴化锌负载氯磷灰石催化剂的活性最高,而且催化剂易回收和重复使用,催化剂重复使用5次活性没有明显降低.     

甲烷在水-叔丁醇混合溶剂中的溶解度

在303.15 K、313.15 K、323.15 K、333.15 K温度下，0－6 MPa压力范围内测定了甲烷在水－叔丁醇混合溶剂中的溶解度．溶剂中叔丁醇的摩尔分数(x_(TBA))从0到1．结果表明，在温度和溶剂组成一定条件下，甲烷的溶解度随其分区的增加而增大，随x_(TBA)的增加，在富水区内，甲烷的溶解度变化较缓慢，当x_(TBA)超过某值时，甲烷的溶解度随x_(TBA)的增加而增大，并且幅度较大；在x_(TBA)约为0－0.045范围内，甲烷的溶解度随温度增加而减小，x_(TBA)约在0.045－0.15范围内，溶解度随温度增加而增加，x_(TBA)约在0.15～1.0范围内，溶解度随温度增加而减小．根据溶解度与温度和溶剂组成的关系可以推测，在303.15－333.15 K、0－6 MPa范围内，水－叙丁醇混合溶剂中仍存在笼合物结构．根据溶解度与温度、压力的关系讨论了甲烷在此混合溶剂中的亨利常数、偏摩尔体积、标准溶解自由能、标准溶解焓和标准溶解熵．     

Enhanced Furfural Production in Deep Eutectic Solvents Comprising Alkali Metal Halides as Additives

The addition of alkali metal halide salts to acidic deep eutectic solvents is here reported as an effective way of boosting xylan conversion into furfural. These salts promote an increase in xylose dehydration due to the cation and anion interactions with the solvent being a promising alternative to the use of harsh operational conditions. Several alkali metal halides were used as additives in the DES composed of cholinium chloride and malic acid ([Ch]Cl:Mal) in a molar ratio of 1:3, with 5 wt.% of water. These mixtures were then used as both solvent and catalyst to produce furfural directly from xylan through microwave-assisted reactions. Preliminary assays were carried out at 150 and 130 °C to gauge the effect of the different salts in furfural yields. A Response Surface Methodology was then applied to optimize the operational conditions. After an optimization of the different operating conditions, a maximum furfural yield of 89.46 ± 0.33% was achieved using 8.19% of lithium bromide in [Ch]Cl:Mal, 1:3; 5 wt.% water, at 157.3 °C and 1.74 min of reaction time. The used deep eutectic solvent and salt were recovered and reused three times, with 79.7% yield in the third cycle, and the furfural and solvent integrity confirmed.     

Metal Oxide Film Anodes in the Electrolysis of Water or Brine

Metal (M) oxide (M: Ir, Os, Pd, Pt, Rh, Ru) together with MaO₂ and MnO₂ alone, were coated on SnO₂ films and the anode behavior was examined in 1.0 N H₂SO₄, 1.0 N NaOH and 1.0, N NaCl aqueous solutions at 25°. The results are compared with those of DSA and of metallic Pt.     

High-Temperature Gas-Phase Electron Diffraction: Unexpected Dimer Structures Among Metal Halides

Gas-phase electron diffraction (GED) studies at high temperatures have several special common features that justify their separate discussion. Due to the difficulties connected with the experiment this technique has developed only in a few laboratories. Most often inorganic systems are studied; lower-valence metal halides and metal oxides. Their low volatility requires high-temperature experimental conditions. Due to the complex vapor composition, other techniques, such as quadrupole mass spectrometry and, to an increasing degree, quantum chemical calculations accompany these GED studies. The analyses often reveal unanticipated structures. In this paper some unexpected and interesting structures of metal halide dimers will be shown, some from GED, others from computations carried out in connection with the high-temperature GED studies of metal halide systems of low volatility.Dedicated to the memory of Professor Victor P. Spiridonov.